Re: Howto Pharo-Seaside-Bootstrap on Raspberry-pi 3

Successfully, seaside and bootstrap 3 and 4 are installed in Pharoiot
correctly by installing Tonel first.
I installed it in the pharoiot-client and pharoiot-server versions.
Thanks for your help
Oswall





El lun., 21 de oct. de 2019 a la(s) 14:30, Paul DeBruicker (
[email protected]) escribió:

> Hi Oswall,
>
>
> I looked into this more and found that the Pharo IOT image does not have
> support for the Tonel source code format.  The Bootstrap packages are kept
> in Tonel format.  So in a clean pharoiot image you can run
>
>
>
> Metacello new
>         repository: 'github://pharo-vcs/tonel';
>         baseline: 'Tonel';
>         load.
>
> to load Tonel and then
>
>
>   Metacello new
>       baseline:'Bootstrap4';
>       repository: 'github://astares/Seaside-Bootstrap4:master/src';
>       load
>
>
> to load Seaside and the Bootstrap 4 packages.
>
>
>
>
>
>
> Oswall Verny Arguedas C. wrote
> > I will keep trying.
> > The query to pharoiot did not give results.
> > If anyone knows another site to download Pharo 7 for raspberrypi please
> > let
> > me know.
> > The important thing is to run Pharo with Seaside and Bootstrap in
> > Raspberry. Then the sensors and actuators will be done differently.
> > I think that Pharo in Raspberry is even more important when the
> > Raspberrypi
> > 4 has 4GB RAM.
> > Thanks in advance
> >
> > El mar., 24 de sep. de 2019 a la(s) 17:35, Oswall Verny Arguedas C. (
>
> > sistecaq@
>
> > ) escribió:
> >
> >> Regards,
> >> Download pharoiot-server, pharoiot-client and pharoiot-multi.
> >> All work well in raspberry. However, the installation of some bootstrap
> >> packages is not available.
> >> I am going to write to pharoiot.org and feedback here so that others
> also
> >> have the solution
> >> Thank you very much for your help
> >>
> >>
> >> El vie., 20 de sep. de 2019 a la(s) 10:45, Paul DeBruicker (
> >>
>
> > pdebruic@
>
> > ) escribió:
> >>
> >>> Oh and you can get a Pharo image from
> >>>
> >>> https://get.pharo.org/ for 32bit or
> >>>
> >>> https://get.pharo.org/64 for 64bit.
> >>>
> >>> I'm not sure if it will download an ARM vm or not.  If not you can use
> >>> the
> >>> VM from the pharoiot install if you ensure you use the same Pharo
> >>> version
> >>> for your clean image as the pharoiot image.
> >>>
> >>>
> >>>
> >>> Paul DeBruicker wrote
> >>> > Oh sorry Oswall.
> >>> >
> >>> > I didn't follow your instructions when testing.  I don't have a Pi.
> >>> I
> >>> > just
> >>> > used the scripts from https://get.pharo.org/64 to get a Pharo 7
> image
> >>> and
> >>> > vm
> >>> > and I didn't use an ARM vm.
> >>> >
> >>> >
> >>> > Maybe we can just troubleshoot it over email.
> >>> >
> >>> >
> >>> > What version of Pharo is pharoiot running on your Pi?
> >>> >
> >>> >
> >>> > The image you posted shows that it was looking for a
> >>> BaselineOfBootstrap4
> >>> > in
> >>> > a repository but couldn't find it.  After running it again and
> hitting
> >>> the
> >>> > bug can you see what repository its looking in where it expects to
> >>> find
> >>> > the
> >>> > BaselineOfBootstrap4?
> >>> >
> >>> > In some versions of Pharo there is a setting for accessing github
> >>> repos
> >>> > via
> >>> > https or ssh. In those versions the default is ssh.  Maybe changing
> it
> >>> to
> >>> > https will help.  If you open the Settings browser
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > Oswall Verny Arguedas C. wrote
> >>> >> Thanks for your reply
> >>> >> Use Pharo 7 downloaded from www.pharoiot.org.
> >>> >> This download is complete image and virtual machine.
> >>> >> I need the features of pharoiot to interact with raspberry gpio.
> >>> And
> >>> >> make app with seaside bootstrap interface.
> >>> >> Pharoiot tunned image and vm.
> >>> >> I changed image to a clean image, it indicates version errors
> between
> >>> the
> >>> >> interpreter and the image.
> >>> >> If I wanted to download clean pharo for ARM, where I can download it
> >>> like
> >>> >> you did it.
> >>> >> Thanks again
> >>> >>
> >>> >>
> >>> >> El jue., 19 de sep. de 2019 a la(s) 15:21, Paul DeBruicker (
> >>> >
> >>> >> pdebruic@
> >>> >
> >>> >> ) escribió:
> >>> >>
> >>> >>> OK.  Are you using Pharo 7 or 8?
> >>> >>>
> >>> >>>
> >>> >>> If you haven't try it in a Pharo7 image as Pharo 8 has not been
> >>> released
> >>> >>> yet.
> >>> >>>
> >>> >>>
> >>> >>> And try it in a clean and unused image first. I ran the command in
> a
> >>> new
> >>> >>> Pharo 7 image and it worked without problems.
> >>> >>>
> >>> >>>
> >>> >>> Also when you get a debugger like that you can hit "Debug" and then
> >>> next
> >>> >>> to
> >>> >>> the "Through" button  there is a
> >>> >>> menu where you can choose to "copy the stack to the clipboard".
> The
> >>> >>> stack
> >>> >>> print out is usually more helpful for email message debugging.
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>> Oswall Verny Arguedas C. wrote
> >>> >>> > [image: PharoScreenshot.png]
> >>> >>> > Hi,
> >>> >>> > this error occurs
> >>> >>> >
> >>> >>> >
> >>> >>> >
> >>> >>> >
> >>> >>> > El jue., 19 de sep. de 2019 a la(s) 08:24, Paul DeBruicker (
> >>> >>>
> >>> >>> > pdebruic@
> >>> >>>
> >>> >>> > ) escribió:
> >>> >>> >
> >>> >>> >> If you run
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>   Metacello new
> >>> >>> >>       baseline:'Bootstrap4';
> >>> >>> >>       repository:
> >>> 'github://astares/Seaside-Bootstrap4:master/src';
> >>> >>> >>       load
> >>> >>> >>
> >>> >>> >> in a playground do you get errors?  IF so please post them here.
> >>> >>> >>
> >>> >>> >>
> >>> >>> >> https://github.com/astares/Seaside-Bootstrap4
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >> Oswall Verny Arguedas C. wrote
> >>> >>> >> > Best regards
> >>> >>> >> > I try to install Pharo with Seaside and Bootstrap in
> >>> Raspberrypi-3,
> >>> >>> but
> >>> >>> >> I
> >>> >>> >> > fail.
> >>> >>> >> > Download from pharoiot.org and Pharo with Seaside run well in
> >>> my
> >>> >>> >> > Raspberrypi-3.
> >>> >>> >> > But some packages like Bootstrap and others I can't install.
> >>> >>> >> > I wanted to make applications in Raspberrypi with persistence
> >>> in
> >>> >>> your
> >>> >>> >> own
> >>> >>> >> > image so that they run on the same Raspberry as a localhost
> >>> with
> >>> a
> >>> >>> web
> >>> >>> >> > interface using seaside and bootstrap.
> >>> >>> >> > There is some configuration that you have missed to install on
> >>> the
> >>> >>> >> > raspberry.
> >>> >>> >> > Thanks in advance
> >>> >>> >> > Oswall
> >>> >>> >> >
> >>> >>> >> > _______________________________________________
> >>> >>> >> > seaside mailing list
> >>> >>> >>
> >>> >>> >> > [email protected]
> >>> >>> >>
> >>> >>> >> >
> >>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >> --
> >>> >>> >> Sent from: http://forum.world.st/Seaside-General-f86180.html
> >>> >>> >> _______________________________________________
> >>> >>> >> seaside mailing list
> >>> >>> >>
> >>> >>>
> >>> >>> > [email protected]
> >>> >>>
> >>> >>> >>
> >>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>> >>> >>
> >>> >>> >
> >>> >>> > _______________________________________________
> >>> >>> > seaside mailing list
> >>> >>>
> >>> >>> > [email protected]
> >>> >>>
> >>> >>> >
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>> >>> >
> >>> >>> >
> >>> >>> > PharoScreenshot.png (104K)
> >>> >>> > <
> >>> http://forum.world.st/attachment/5104090/0/PharoScreenshot.png>
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>> --
> >>> >>> Sent from: http://forum.world.st/Seaside-General-f86180.html
> >>> >>> _______________________________________________
> >>> >>> seaside mailing list
> >>> >>>
> >>> >
> >>> >> [email protected]
> >>> >
> >>> >>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>> >>>
> >>> >>
> >>> >> _______________________________________________
> >>> >> seaside mailing list
> >>> >
> >>> >> [email protected]
> >>> >
> >>> >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > --
> >>> > Sent from: http://forum.world.st/Seaside-General-f86180.html
> >>> > _______________________________________________
> >>> > seaside mailing list
> >>>
> >>> > [email protected]
> >>>
> >>> > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> --
> >>> Sent from: http://forum.world.st/Seaside-General-f86180.html
> >>> _______________________________________________
> >>> seaside mailing list
> >>>
>
> > [email protected]
>
> >>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>>
> >>
> >
> > _______________________________________________
> > seaside mailing list
>
> > [email protected]
>
> > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
>
>
>
>
> --
> Sent from: http://forum.world.st/Seaside-General-f86180.html
> _______________________________________________
> seaside mailing list
> [email protected]
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>

_______________________________________________
seaside mailing list
[email protected]
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside