Re: Embedded ARM GNU 8.2.1 Archive Fail on Lib Target

AMDG

On 2/12/19 3:47 PM, codex653 via Boost-build wrote:
> Right, the C:/Program thing has no bearing on the behavior of this issue. I
> am currently on my laptop now, which does not produce the C:/Program message
> and I still see the issue described previously.
> 
> I've run the command from the error log from a .bat file and that still
> worked a treat. I've also ran with your -d1 -d+4 flags added and pasted the
> resulting output below (starting from the last compiled file). Nothing jumps
> out at me immediately as being amiss here.
> 
> <snip>
> gcc.archive
> ..\..\..\Thor\lib\stm32hal_f7\bin\gcc-8.2.1\debug\ThorMCU-STM32F767\link-static\libHAL_DRIVER.a
> Executing using a command file and the shell:
> ..\..\..\Thor\lib\stm32hal_f7\bin\gcc-8.2.1\debug\ThorMCU-STM32F767\link-static\libHAL_DRIVER.a
> Command string for CreateProcessA():
> '..\..\..\Thor\lib\stm32hal_f7\bin\gcc-8.2.1\debug\ThorMCU-STM32F767\link-static\libHAL_DRIVER.a
> "C:\Users\brand\AppData\Local\Temp\jam21660-00-00.bat"'

That's the problem.

In Christ,
Steven Watanabe
_______________________________________________
Unsubscribe & other changes: https://lists.boost.org/mailman/listinfo.cgi/boost-build