[glibc] manual/install.texi, INSTALL: update version numbers

https://sourceware.org/git/gitweb.cgi?p=glibc.git;h=0f731d92cd54f0b4fbcd1d2062d69e91a18ca9ac

commit 0f731d92cd54f0b4fbcd1d2062d69e91a18ca9ac
Author: Andreas K. Hüttel <[email protected]>
Date:   Wed Jul 22 00:29:10 2026 +0900

    manual/install.texi, INSTALL: update version numbers
    
    Signed-off-by: Andreas K. Hüttel <[email protected]>

Diff:
---
 INSTALL             | 16 ++++++++--------
 manual/install.texi | 16 ++++++++--------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/INSTALL b/INSTALL
index cd4b6e5c2f..bafae84f75 100644
--- a/INSTALL
+++ b/INSTALL
@@ -480,7 +480,7 @@ build the GNU C Library:
      GCC 12.1 or higher is required.  In general it is recommended to
      use the newest version of the compiler that is known to work for
      building the GNU C Library, as newer compilers usually produce
-     better code.  As of release time, GCC 15.2.1 is the newest compiler
+     better code.  As of release time, GCC 16.1.1 is the newest compiler
      verified to work to build the GNU C Library.
 
      For multi-arch support it is recommended to use a GCC which has
@@ -502,7 +502,7 @@ build the GNU C Library:
 
      You must use GNU 'binutils' (as and ld) to build the GNU C Library.
      No other assembler or linker has the necessary functionality at the
-     moment.  As of release time, GNU 'binutils' 2.45.1 is the newest
+     moment.  As of release time, GNU 'binutils' 2.46.1 is the newest
      verified to work to build the GNU C Library.
 
    * GNU 'texinfo' 4.7 or later
@@ -511,7 +511,7 @@ build the GNU C Library:
      need this version of the 'texinfo' package.  Earlier versions do
      not understand all the tags used in the document, and the
      installation mechanism for the info files is not present or works
-     differently.  As of release time, 'texinfo' 7.2 is the newest
+     differently.  As of release time, 'texinfo' 7.3 is the newest
      verified to work to build the GNU C Library.
 
    * GNU 'awk' 3.1.2, or higher
@@ -519,7 +519,7 @@ build the GNU C Library:
      'awk' is used in several places to generate files.  Some 'gawk'
      extensions are used, including the 'asorti' function, which was
      introduced in version 3.1.2 of 'gawk'.  As of release time, 'gawk'
-     version 5.3.2 is the newest verified to work to build the GNU C
+     version 5.4.1 is the newest verified to work to build the GNU C
      Library.
 
      Testing the GNU C Library requires 'gawk' to be compiled with
@@ -536,19 +536,19 @@ build the GNU C Library:
 
      Perl is not required, but if present it is used in some tests and
      the 'mtrace' program, to build the GNU C Library manual.  As of
-     release time 'perl' version 5.42.0 is the newest verified to work
+     release time 'perl' version 5.44.0 is the newest verified to work
      to build the GNU C Library.
 
    * GNU 'sed' 3.02 or newer
 
      'Sed' is used in several places to generate files.  Most scripts
      work with any version of 'sed'.  As of release time, 'sed' version
-     4.9 is the newest verified to work to build the GNU C Library.
+     4.10 is the newest verified to work to build the GNU C Library.
 
    * Python 3.4 or later
 
      Python is required to build the GNU C Library.  As of release time,
-     Python 3.14.0 is the newest verified to work for building and
+     Python 3.14.6 is the newest verified to work for building and
      testing the GNU C Library.
 
    * PExpect 4.0
@@ -634,7 +634,7 @@ components of the GNU C Library installation to be in '/lib' and some in
 Library with '--prefix=/usr'.  If you set some other prefix or allow it
 to default to '/usr/local', then all the components are installed there.
 
-   As of release time, Linux version 6.12 is the newest stable version
+   As of release time, Linux version 7.1 is the newest stable version
 verified to work to build the GNU C Library.
 
 Reporting Bugs
diff --git a/manual/install.texi b/manual/install.texi
index 48604a31df..fe4a368385 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -524,7 +524,7 @@ GCC 12.1 or newer
 GCC 12.1 or higher is required.  In general it is recommended to use
 the newest version of the compiler that is known to work for building
 @theglibc{}, as newer compilers usually produce better code.  As of
-release time, GCC 15.2.1 is the newest compiler verified to work to build
+release time, GCC 16.1.1 is the newest compiler verified to work to build
 @theglibc{}.
 
 For multi-arch support it is recommended to use a GCC which has been built with
@@ -545,7 +545,7 @@ GNU @code{binutils} 2.39 or later
 
 You must use GNU @code{binutils} (as and ld) to build @theglibc{}.
 No other assembler or linker has the necessary functionality at the
-moment. As of release time, GNU @code{binutils} 2.45.1 is the newest
+moment. As of release time, GNU @code{binutils} 2.46.1 is the newest
 verified to work to build @theglibc{}.
 
 @item
@@ -555,7 +555,7 @@ To correctly translate and install the Texinfo documentation you need
 this version of the @code{texinfo} package.  Earlier versions do not
 understand all the tags used in the document, and the installation
 mechanism for the info files is not present or works differently.
-As of release time, @code{texinfo} 7.2 is the newest verified to work
+As of release time, @code{texinfo} 7.3 is the newest verified to work
 to build @theglibc{}.
 
 @item
@@ -564,7 +564,7 @@ GNU @code{awk} 3.1.2, or higher
 @code{awk} is used in several places to generate files.
 Some @code{gawk} extensions are used, including the @code{asorti}
 function, which was introduced in version 3.1.2 of @code{gawk}.
-As of release time, @code{gawk} version 5.3.2 is the newest verified
+As of release time, @code{gawk} version 5.4.1 is the newest verified
 to work to build @theglibc{}.
 
 Testing the GNU C Library requires @code{gawk} to be compiled with
@@ -583,7 +583,7 @@ Perl 5
 
 Perl is not required, but if present it is used in some tests and the
 @code{mtrace} program, to build the @glibcadj{} manual.  As of release
-time @code{perl} version 5.42.0 is the newest verified to work to
+time @code{perl} version 5.44.0 is the newest verified to work to
 build @theglibc{}.
 
 @item
@@ -591,13 +591,13 @@ GNU @code{sed} 3.02 or newer
 
 @code{Sed} is used in several places to generate files.  Most scripts work
 with any version of @code{sed}.  As of release time, @code{sed} version
-4.9 is the newest verified to work to build @theglibc{}.
+4.10 is the newest verified to work to build @theglibc{}.
 
 @item
 Python 3.4 or later
 
 Python is required to build @theglibc{}.  As of release time, Python
-3.14.0 is the newest verified to work for building and testing
+3.14.6 is the newest verified to work for building and testing
 @theglibc{}.
 
 @item PExpect 4.0
@@ -698,7 +698,7 @@ if you configure @theglibc{} with @samp{--prefix=/usr}.  If you set some other
 prefix or allow it to default to @file{/usr/local}, then all the
 components are installed there.
 
-As of release time, Linux version 6.12 is the newest stable version verified
+As of release time, Linux version 7.1 is the newest stable version verified
 to work to build @theglibc{}.
 
 @node Reporting Bugs