more gcc-3.3/ACE/comterp/configure/Darwin cleanup
[email protected] Tue, 10 Feb 2004 16:02:01 -0800
| Newsgroups | gmane.comp.lib.ivtools.patches |
|---|---|
| Message-ID | <[email protected]> |
Patch: ivtools-040210-johnston-007 For: ivtools-1.1.2 Author: [email protected] Subject: more gcc-3.3/ACE/comterp/configure/Darwin cleanup Requires: This is an intermediate patch to ivtools-1.1.2. To apply, cd to the top-level directory of the ivtools source tree (the directory with src and config subdirs), and apply like this: patch -p0 <ThisFile Summary of Changes: - more cleanup of problems introduced by evolution of gcc and migration to Darwin. Finally they re-instated an iostreams filebuf constructor that accepts a file handle (with gcc-3.1)! So for the first time ever everything seems relatively happy on MacOS X and for the first time in a couple years things are back up to par with gcc-3.*/libstdc++-v3. - fixed comterp error messages. I inadvertently disabled these a while back when I hacked in a way of skipping shell script "#" comments into the lexical scanner. You see, the error messages were kept as a list of #define's in C source code... Index: ComTerp/comterp.c diff -c ComTerp/comterp.c:1.1 ComTerp/comterp.c:1.2 *** ComTerp/comterp.c:1.1 Fri Jan 9 11:42:25 2004 --- src/ComTerp/comterp.c Tue Feb 10 11:41:03 2004 *************** *** 884,893 **** fbuf.attach(fd); } else fbuf.attach(fileno(stdout)); ! #else fileptr_filebuf fbuf(handler() && handler()->wrfptr() ? handler()->wrfptr() : stdout, ios_base::out); #endif ostream out(&fbuf); boolean eolflag = false; --- 884,896 ---- fbuf.attach(fd); } else fbuf.attach(fileno(stdout)); ! #elif __GNUC__==3 && __GNUC_MINOR__<1 || 1 fileptr_filebuf fbuf(handler() && handler()->wrfptr() ? handler()->wrfptr() : stdout, ios_base::out); + #else + fileptr_filebuf fbuf(handler() ? handler()->get_handle() : 1, + ios_base::out, false, static_cast<size_t>(BUFSIZ)); #endif ostream out(&fbuf); boolean eolflag = false; *************** *** 907,913 **** break; } else if (!func_for_next_expr() && val_for_next_func().is_null()) { print_stack_top(out); ! out << "\n"; out.flush(); } } else { out << _errbuf << "\n"; out.flush(); --- 910,916 ---- break; } else if (!func_for_next_expr() && val_for_next_func().is_null()) { print_stack_top(out); ! out << "\n"; out.flush(); } } else { out << _errbuf << "\n"; out.flush(); Index: ComTerp/ctrlfunc.c diff -c ComTerp/ctrlfunc.c:1.2 ComTerp/ctrlfunc.c:1.3 *** ComTerp/ctrlfunc.c:1.2 Fri Jan 30 11:12:29 2004 --- src/ComTerp/ctrlfunc.c Tue Feb 10 11:41:03 2004 *************** *** 37,43 **** --- 37,47 ---- #if __GNUC__>=3 static char newline; + #if __GNUC__>3||__GNUC_MINOR_>1 + #include <ext/stdio_filebuf.h> #endif + #endif + / ************************************************************************ *****/ *************** *** 116,121 **** --- 120,131 ---- reset_stack(); #ifdef HAVE_ACE + + #if __GNUC__==3&&__GNUC_MINOR__<1 + fprintf(stderr, "Please upgrade to gcc-3.1 or greater\n"); + return; + #endif + if (hostv.is_string() && portv.is_known() && cmdstrv.is_string()) { const char* hoststr = hostv.string_ptr(); *************** *** 134,150 **** filebuf ofbuf; ofbuf.attach(socket.get_handle()); #else ! FILE* ofptr = fdopen(socket.get_handle(), "r"); ! fileptr_filebuf ofbuf(ofptr, ios_base::out); #endif ostream out(&ofbuf); const char* cmdstr = cmdstrv.string_ptr(); out << cmdstr; if (cmdstr[strlen(cmdstr)-1] != '\n') out << "\n"; out.flush(); - #if __GNUC__>=3 - fclose(ofptr); - #endif if (nowaitv.is_false()) { #if __GNUC__<3 filebuf ifbuf; --- 144,157 ---- filebuf ofbuf; ofbuf.attach(socket.get_handle()); #else ! fileptr_filebuf ofbuf((int)socket.get_handle(), ios_base::out, ! false, static_cast<size_t>(BUFSIZ)); #endif ostream out(&ofbuf); const char* cmdstr = cmdstrv.string_ptr(); out << cmdstr; if (cmdstr[strlen(cmdstr)-1] != '\n') out << "\n"; out.flush(); if (nowaitv.is_false()) { #if __GNUC__<3 filebuf ifbuf; *************** *** 153,170 **** char* buf; in.gets(&buf); #else - FILE* fptr = fdopen(socket.get_handle(), "r"); - fileptr_filebuf ifbuf(fptr, ios_base::in); - istream in(&ifbuf); char buf[BUFSIZ]; ! in.get(buf, BUFSIZ); ! in.get(newline); #endif ComValue& retval = comterpserv()->run(buf, true); push_stack(retval); - #if __GNUC__>=3 - fclose(fptr); - #endif } if (socket.close () == -1) --- 160,174 ---- char* buf; in.gets(&buf); #else char buf[BUFSIZ]; ! int i=0; ! do { ! read(socket.get_handle(), buf+i++, 1); ! } while (i<BUFSIZ-1 && buf[i-1]!='\n'); ! if (buf[i]=='\n') buf[i]==0; #endif ComValue& retval = comterpserv()->run(buf, true); push_stack(retval); } if (socket.close () == -1) Index: ComUtil/_lexscan.c diff -c ComUtil/_lexscan.c:1.1 ComUtil/_lexscan.c:1.2 *** ComUtil/_lexscan.c:1.1 Fri Jan 9 11:42:14 2004 --- src/ComUtil/_lexscan.c Tue Feb 10 11:41:01 2004 *************** *** 242,249 **** --- 242,253 ---- (*outfunc) ( "> ", outfile); _continuation_prompt = 0; } + #if 0 while( (infunc_retval = (*infunc)( buffer, bufsiz, infile )) != NULL && buffer[0] == '#') {} /* skip all script comments */ + #else + infunc_retval = (*infunc)( buffer, bufsiz, infile ); + #endif if( infunc_retval == NULL ) { if( *toklen > 0 ) goto token_return; Index: ComUtil/errsys.c diff -c ComUtil/errsys.c:1.1 ComUtil/errsys.c:1.2 *** ComUtil/errsys.c:1.1 Fri Jan 9 11:42:15 2004 --- src/ComUtil/errsys.c Tue Feb 10 11:41:01 2004 *************** *** 137,157 **** errpath = (char*)getenv( "COMTERP_PATH" ); if (errpath) { strcpy( fullpath, errpath ); ! strcat( fullpath, "/" ); strcat( fullpath, errfile ); fptr = fopen(fullpath, "r"); } if (!fptr) { strcpy( fullpath, RELLIBALLDIR ); ! strcat( fullpath, "/" ); strcat( fullpath, errfile ); fptr = fopen(fullpath, "r"); } if (!fptr) { strcpy( fullpath, ABSLIBALLDIR ); ! strcat( fullpath, "/" ); strcat( fullpath, errfile ); fptr = fopen(fullpath, "r"); } --- 137,157 ---- errpath = (char*)getenv( "COMTERP_PATH" ); if (errpath) { strcpy( fullpath, errpath ); ! if (fullpath[strlen(fullpath)-1] != '/') strcat( fullpath, "/" ); strcat( fullpath, errfile ); fptr = fopen(fullpath, "r"); } if (!fptr) { strcpy( fullpath, RELLIBALLDIR ); ! if (fullpath[strlen(fullpath)-1] != '/') strcat( fullpath, "/" ); strcat( fullpath, errfile ); fptr = fopen(fullpath, "r"); } if (!fptr) { strcpy( fullpath, ABSLIBALLDIR ); ! if (fullpath[strlen(fullpath)-1] != '/') strcat( fullpath, "/" ); strcat( fullpath, errfile ); fptr = fopen(fullpath, "r"); } Index: top_ivtools/MANIFEST diff -c top_ivtools/MANIFEST:1.1 top_ivtools/MANIFEST:1.2 *** top_ivtools/MANIFEST:1.1 Fri Jan 9 11:42:09 2004 --- ./MANIFEST Tue Feb 10 11:40:58 2004 *************** *** 1553,1559 **** ivtools-1.1/src/include/ivstd/stdlib.h ivtools-1.1/src/include/ivstd/stream.h ivtools-1.1/src/include/ivstd/string.h - ivtools-1.1/src/include/ivstd/strstream.h ivtools-1.1/src/include/ivstd/version.h ivtools-1.1/src/iueserv_/Imakefile ivtools-1.1/src/iueserv_/Makefile --- 1553,1558 ---- Index: top_ivtools/aclocal.m4 diff -c top_ivtools/aclocal.m4:1.1 top_ivtools/aclocal.m4:1.2 *** top_ivtools/aclocal.m4:1.1 Fri Jan 9 11:42:09 2004 --- ./aclocal.m4 Tue Feb 10 11:40:58 2004 *************** *** 1,46 **** - dnl ICE_CXX_INCLUDE_DIR - dnl ------------------- - dnl - dnl Set output variable CXX_INCLUDE_DIR to the name of a directory - dnl where the C++ compiler looks for C++ include files. - dnl - AC_DEFUN(ICE_CXX_INCLUDE_DIR, - [ - AC_MSG_CHECKING(for directory to install c++ include files) - AC_CACHE_VAL(ice_cv_cxx_include_dir, - [ - cat > conftest.cc << EOF - #include <iostream.h> - EOF - changequote(,)dnl - $CXXCPP $DEFS conftest.cc > conftest.ii 2>&5 - if test $? != 0; then - AC_MSG_ERROR(${CXXCPP} could not find iostream.h) - else - ice_file=`grep '^# 1' conftest.ii | grep iostream.h | \ - head -1 | sed 's/^.*"\(.*\)".*$/\1/'` - ice_cv_cxx_include_dir=`echo $ice_file | sed 's%iostream.h%%'` - fi - if test "$ice_cv_cxx_include_dir" = ""; then - ice_cv_cxx_include_dir="$prefix/include" - for pfx in "$prefix" "$exec_prefix"; do - for dir in "$pfx/lib/g++-include" "$pfx/include/CC" \ - "$pfx/include" /usr/include /usr/local/include/g++-v3 /usr/local/include/g++-3 /usr/local/include/g++-2 ; do - if test -d "$dir"; then - ice_cv_cxx_include_dir="$dir" - break - fi - done - done - fi - changequote([,])dnl - rm -f conftest.cc conftest.ii - ]) - CXX_INCLUDE_DIR=$ice_cv_cxx_include_dir - AC_MSG_RESULT(${CXX_INCLUDE_DIR}) - AC_SUBST(CXX_INCLUDE_DIR) - ])dnl - AC_DEFUN(AC_TYPE_SOCKLEN_T, [AC_CACHE_CHECK([for socklen_t], ac_cv_type_socklen_t, [ --- 1,3 ---- Index: top_ivtools/configure diff -c top_ivtools/configure:1.1 top_ivtools/configure:1.2 *** top_ivtools/configure:1.1 Fri Jan 9 11:42:09 2004 --- ./configure Tue Feb 10 11:40:58 2004 *************** *** 1,50 **** #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. ! # Generated automatically using autoconf version 2.13 ! # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ! # Defaults: ! ac_help= ac_default_prefix=/usr/local ! # Any additions from configure.in: ! ac_help="$ac_help ! --with-ace=<path> Path to ACE include files" ! ac_help="$ac_help ! --with-ace-libs=<path> Path to ACE libraries" ! ac_help="$ac_help ! --with-clippoly=<path> Path to clippoly include file" ! ac_help="$ac_help ! --with-clippoly-libs=<path> Path to clippoly libraries" ! ac_help="$ac_help ! --with-fresco=<path> path to Fresco include files (not-used)" ! ac_help="$ac_help ! --with-fresco-libs=<path> path to compiled Fresco libs (not-used)" ! ac_help="$ac_help ! --with-iue=<path> path to IUE directory" ! ac_help="$ac_help ! --with-iue-libs=<path> path to compiled IUE libs" ! ac_help="$ac_help ! --with-x use the X Window System" ! ac_help="$ac_help ! --enable-install-relative[=ARG] enable installation relative to the source tree" ! ac_help="$ac_help ! --enable-use-rpath[=ARG] enable use of -rpath when linking" ! ac_help="$ac_help ! --enable-install-subdir[=ARG] enable installation in an ivtools sub-directory" # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. ! build=NONE ! cache_file=./config.cache exec_prefix=NONE - host=NONE no_create= - nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE --- 1,287 ---- #! /bin/sh # Guess values for system-dependent variables and create Makefiles. ! # Generated by GNU Autoconf 2.57. # + # Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 + # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + + # Be Bourne compatible + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix + fi + + # Support unset when possible. + if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset + else + as_unset=false + fi + + + # Work around bugs in pre-3.0 UWIN ksh. + $as_unset ENV MAIL MAILPATH + PS1='$ ' + PS2='> ' + PS4='+ ' + + # NLS nuisances. + for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME + do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi + done + + # Required to use basename. + if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr + else + as_expr=false + fi + + if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false + fi + + + # Name of the executable. + as_me=`$as_basename "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || + echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + + # PATH needs CR, and LINENO needs CR and PATH. + # Avoid depending upon Character Ranges. + as_cr_letters='abcdefghijklmnopqrstuvwxyz' + as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' + as_cr_Letters=$as_cr_letters$as_cr_LETTERS + as_cr_digits='0123456789' + as_cr_alnum=$as_cr_Letters$as_cr_digits + + # The user is always right. + if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh + fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done + done + ;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit + } + + + case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' + ' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; + esac + + if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi + rm -f conf$$ conf$$.exe conf$$.file + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: + else + as_mkdir_p=false + fi + + as_executable_p="test -f" + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + + # Sed expression to map a string onto a valid variable name. + as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + + # IFS + # We need space, tab and new line, in precisely that order. + as_nl=' + ' + IFS=" $as_nl" + + # CDPATH. + $as_unset CDPATH + ! # Name of the host. ! # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ! # so uname gets run too. ! ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` ! ! exec 6>&1 ! ! # ! # Initializations. ! # ac_default_prefix=/usr/local ! ac_config_libobj_dir=. ! cross_compiling=no ! subdirs= ! MFLAGS= ! MAKEFLAGS= ! SHELL=${CONFIG_SHELL-/bin/sh} ! ! # Maximum number of lines to put in a shell here document. ! # This variable seems obsolete. It should probably be removed, and ! # only ac_max_sed_lines should be used. ! : ${ac_max_here_lines=38} ! ! # Identity of this package. ! PACKAGE_NAME= ! PACKAGE_TARNAME= ! PACKAGE_VERSION= ! PACKAGE_STRING= ! PACKAGE_BUGREPORT= ! ! ac_unique_file="configure.in" ! ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT CC CFLAGS ac_ct_CC CXXCPP RANLIB ac_ct_RANLIB CPP CXX_INCLUDE_DIR LIBSTDCPLUSPLUS2 LIBSTDCPLUSPLUS3 x_includes x_libraries ACE ACE_LIBS ACE_ENABLED CLIPPOLY CLIPPOLY_LIBS CLIPPOLY_ENABLED FRESCOLIBS FRESCOINCS FRESCO_ENABLED IUE IUELIBS IUEINCS IUE_ENABLED QT QTLIBS QTINCS QT_ENABLED IV IV_LIBS NO_BOOL PWD INSTALLRELATIVE USERPATH INSTALLSUBDIR ac_cv_type_socklen_t LIBOBJS LTLIBOBJS' ! ac_subst_files='' # Initialize some variables set by options. + ac_init_help= + ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. ! cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE *************** *** 53,62 **** silent= site= srcdir= - target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' --- 290,304 ---- silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE + + # Installation directory options. + # These are left unexpanded so users can "make install exec_prefix=/foo" + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' *************** *** 70,86 **** infodir='${prefix}/info' mandir='${prefix}/man' - # Initialize some other variables. - subdirs= - MFLAGS= MAKEFLAGS= - SHELL=${CONFIG_SHELL-/bin/sh} - # Maximum number of lines to put in a shell here document. - ac_max_here_lines=12 - ac_prev= for ac_option do - # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" --- 312,320 ---- *************** *** 88,146 **** continue fi ! case "$ac_option" in ! -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; ! *) ac_optarg= ;; ! esac # Accept the important Cygnus configure options, so we can diagnose typos. ! case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ! bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ! ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) ! build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ! cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) ! datadir="$ac_optarg" ;; -disable-* | --disable-*) ! ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. ! if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then ! { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } ! fi ! ac_feature=`echo $ac_feature| sed 's/-/_/g'` ! eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ! ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. ! if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then ! { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } ! fi ! ac_feature=`echo $ac_feature| sed 's/-/_/g'` ! case "$ac_option" in ! *=*) ;; *) ac_optarg=yes ;; esac ! eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ --- 322,380 ---- continue fi ! ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. ! case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) ! bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ! ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) ! build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) ! cache_file=$ac_optarg ;; ! ! --config-cache | -C) ! cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) ! datadir=$ac_optarg ;; -disable-* | --disable-*) ! ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. ! expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ! { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ! { (exit 1); exit 1; }; } ! ac_feature=`echo $ac_feature | sed 's/-/_/g'` ! eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) ! ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. ! expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ! { echo "$as_me: error: invalid feature name: $ac_feature" >&2 ! { (exit 1); exit 1; }; } ! ac_feature=`echo $ac_feature | sed 's/-/_/g'` ! case $ac_option in ! *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac ! eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ *************** *** 149,243 **** -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) ! exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; ! -help | --help | --hel | --he) ! # Omit some internal or obsolete options to make the list less imposing. ! # This message is too long to be a string in the A/UX 3.1 sh. ! cat << EOF ! Usage: configure [options] [host] ! Options: [defaults in brackets after descriptions] ! Configuration: ! --cache-file=FILE cache test results in FILE ! --help print this message ! --no-create do not create output files ! --quiet, --silent do not print \`checking...' messages ! --version print the version of autoconf that created configure ! Directory and file names: ! --prefix=PREFIX install architecture-independent files in PREFIX ! [$ac_default_prefix] ! --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX ! [same as prefix] ! --bindir=DIR user executables in DIR [EPREFIX/bin] ! --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] ! --libexecdir=DIR program executables in DIR [EPREFIX/libexec] ! --datadir=DIR read-only architecture-independent data in DIR ! [PREFIX/share] ! --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] ! --sharedstatedir=DIR modifiable architecture-independent data in DIR ! [PREFIX/com] ! --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] ! --libdir=DIR object code libraries in DIR [EPREFIX/lib] ! --includedir=DIR C header files in DIR [PREFIX/include] ! --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] ! --infodir=DIR info documentation in DIR [PREFIX/info] ! --mandir=DIR man documentation in DIR [PREFIX/man] ! --srcdir=DIR find the sources in DIR [configure dir or ..] ! --program-prefix=PREFIX prepend PREFIX to installed program names ! --program-suffix=SUFFIX append SUFFIX to installed program names ! --program-transform-name=PROGRAM ! run sed PROGRAM on installed program names ! EOF ! cat << EOF ! Host type: ! --build=BUILD configure for building on BUILD [BUILD=HOST] ! --host=HOST configure for HOST [guessed] ! --target=TARGET configure for TARGET [TARGET=HOST] ! Features and packages: ! --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) ! --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ! --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] ! --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) ! --x-includes=DIR X include files are in DIR ! --x-libraries=DIR X library files are in DIR ! EOF ! if test -n "$ac_help"; then ! echo "--enable and --with options recognized:$ac_help" ! fi ! exit 0 ;; -host | --host | --hos | --ho) ! ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) ! host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) ! includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ! infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) ! libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) ! libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ --- 383,429 ---- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) ! exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; ! -help | --help | --hel | --he | -h) ! ac_init_help=long ;; ! -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ! ac_init_help=recursive ;; ! -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ! ac_init_help=short ;; -host | --host | --hos | --ho) ! ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) ! host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) ! includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) ! infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) ! libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) ! libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ *************** *** 246,264 **** -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ! localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ! mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ! | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ --- 432,450 ---- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ! localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) ! mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ! | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ *************** *** 272,297 **** -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ! oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ! prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ! program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ! program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ --- 458,483 ---- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) ! oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) ! prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) ! program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) ! program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ *************** *** 308,314 **** | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) ! program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) --- 494,500 ---- | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) ! program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) *************** *** 318,324 **** ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) ! sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ --- 504,510 ---- ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) ! sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ *************** *** 329,386 **** | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) ! sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) ! site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ! srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ! sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ! ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ! target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; ! -version | --version | --versio | --versi | --vers) ! echo "configure generated by autoconf version 2.13" ! exit 0 ;; -with-* | --with-*) ! ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. ! if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then ! { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } ! fi ac_package=`echo $ac_package| sed 's/-/_/g'` ! case "$ac_option" in ! *=*) ;; *) ac_optarg=yes ;; esac ! eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ! ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. ! if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then ! { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } ! fi ! ac_package=`echo $ac_package| sed 's/-/_/g'` ! eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. --- 515,571 ---- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) ! sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) ! site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) ! srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) ! sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ! ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) ! target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; ! -version | --version | --versio | --versi | --vers | -V) ! ac_init_version=: ;; -with-* | --with-*) ! ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. ! expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ! { echo "$as_me: error: invalid package name: $ac_package" >&2 ! { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` ! case $ac_option in ! *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac ! eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) ! ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. ! expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ! { echo "$as_me: error: invalid package name: $ac_package" >&2 ! { (exit 1); exit 1; }; } ! ac_package=`echo $ac_package | sed 's/-/_/g'` ! eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. *************** *** 391,489 **** ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ! x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ! x_libraries="$ac_optarg" ;; ! -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) ! if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then ! echo "configure: warning: $ac_option: invalid host type" 1>&2 ! fi ! if test "x$nonopt" != xNONE; then ! { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ! fi ! nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then ! { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } ! fi ! ! trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 ! ! # File descriptor usage: ! # 0 standard input ! # 1 file creation ! # 2 errors and warnings ! # 3 some systems may open it to /dev/tty ! # 4 used on the Kubota Titan ! # 6 checking for... messages and results ! # 5 compiler messages saved in config.log ! if test "$silent" = yes; then ! exec 6>/dev/null ! else ! exec 6>&1 fi - exec 5>./config.log ! echo "\ ! This file contains any messages produced by compilers while ! running configure, to aid debugging if configure makes a mistake. ! " 1>&5 ! # Strip out --no-create and --no-recursion so they do not pile up. ! # Also quote any args containing shell metacharacters. ! ac_configure_args= ! for ac_arg do ! case "$ac_arg" in ! -no-create | --no-create | --no-creat | --no-crea | --no-cre \ ! | --no-cr | --no-c) ;; ! -no-recursion | --no-recursion | --no-recursio | --no-recursi \ ! | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; ! *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ! ac_configure_args="$ac_configure_args '$ac_arg'" ;; ! *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done ! # NLS nuisances. ! # Only set these to C if already set. These must not be set unconditionally ! # because not all systems understand e.g. LANG=C (notably SCO). ! # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! ! # Non-C LC_CTYPE values break the ctype check. ! if test "${LANG+set}" = set; then LANG=C; export LANG; fi ! if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi ! if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi ! if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi ! # confdefs.h avoids OS command line length limits that DEFS can exceed. ! rm -rf conftest* confdefs.h ! # AIX cpp loses on an empty file, so make sure it contains at least a newline. ! echo > confdefs.h ! # A filename unique to this package, relative to the directory that ! # configure is in, which we can look for to find out if srcdir is correct. ! ac_unique_file=configure.in # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ! ac_prog=$0 ! ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` ! test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. --- 576,685 ---- ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) ! x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) ! x_libraries=$ac_optarg ;; ! -*) { echo "$as_me: error: unrecognized option: $ac_option ! Try \`$0 --help' for more information." >&2 ! { (exit 1); exit 1; }; } ;; + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + *) ! # FIXME: should be removed in autoconf 3.0. ! echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ! expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && ! echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ! : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ! ac_option=--`echo $ac_prev | sed 's/_/-/g'` ! { echo "$as_me: error: missing argument to $ac_option" >&2 ! { (exit 1); exit 1; }; } fi ! # Be sure to have absolute paths. ! for ac_var in exec_prefix prefix ! do ! eval ac_val=$`echo $ac_var` ! case $ac_val in ! [\\/$]* | ?:[\\/]* | NONE | '' ) ;; ! *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ! { (exit 1); exit 1; }; };; ! esac ! done ! # Be sure to have absolute paths. ! for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ ! localstatedir libdir includedir oldincludedir infodir mandir do ! eval ac_val=$`echo $ac_var` ! case $ac_val in ! [\\/$]* | ?:[\\/]* ) ;; ! *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ! { (exit 1); exit 1; }; };; esac done ! # There might be people who depend on the old broken behavior: `$host' ! # used to hold the argument of --host etc. ! # FIXME: To remove some day. ! build=$build_alias ! host=$host_alias ! target=$target_alias ! ! # FIXME: To remove some day. ! if test "x$host_alias" != x; then ! if test "x$build_alias" = x; then ! cross_compiling=maybe ! echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ! If a cross compiler is detected then cross compile mode will be used." >&2 ! elif test "x$build_alias" != "x$host_alias"; then ! cross_compiling=yes ! fi ! fi ! ac_tool_prefix= ! test -n "$host_alias" && ac_tool_prefix=$host_alias- ! test "$silent" = yes && exec 6>/dev/null + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ! ac_confdir=`(dirname "$0") 2>/dev/null || ! $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ! X"$0" : 'X\(//\)[^/]' \| \ ! X"$0" : 'X\(//\)$' \| \ ! X"$0" : 'X\(/\)' \| \ ! . : '\(.\)' 2>/dev/null || ! echo X"$0" | ! sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ! /^X\(\/\/\)[^/].*/{ s//\1/; q; } ! /^X\(\/\/\)$/{ s//\1/; q; } ! /^X\(\/\).*/{ s//\1/; q; } ! s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. *************** *** 493,505 **** fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then ! { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else ! { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi ! srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then --- 689,1155 ---- fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then ! { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 ! { (exit 1); exit 1; }; } else ! { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ! { (exit 1); exit 1; }; } fi + fi + (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } + srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` + ac_env_build_alias_set=${build_alias+set} + ac_env_build_alias_value=$build_alias + ac_cv_env_build_alias_set=${build_alias+set} + ac_cv_env_build_alias_value=$build_alias + ac_env_host_alias_set=${host_alias+set} + ac_env_host_alias_value=$host_alias + ac_cv_env_host_alias_set=${host_alias+set} + ac_cv_env_host_alias_value=$host_alias + ac_env_target_alias_set=${target_alias+set} + ac_env_target_alias_value=$target_alias + ac_cv_env_target_alias_set=${target_alias+set} + ac_cv_env_target_alias_value=$target_alias + ac_env_CXX_set=${CXX+set} + ac_env_CXX_value=$CXX + ac_cv_env_CXX_set=${CXX+set} + ac_cv_env_CXX_value=$CXX + ac_env_CXXFLAGS_set=${CXXFLAGS+set} + ac_env_CXXFLAGS_value=$CXXFLAGS + ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} + ac_cv_env_CXXFLAGS_value=$CXXFLAGS + ac_env_LDFLAGS_set=${LDFLAGS+set} + ac_env_LDFLAGS_value=$LDFLAGS + ac_cv_env_LDFLAGS_set=${LDFLAGS+set} + ac_cv_env_LDFLAGS_value=$LDFLAGS + ac_env_CPPFLAGS_set=${CPPFLAGS+set} + ac_env_CPPFLAGS_value=$CPPFLAGS + ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} + ac_cv_env_CPPFLAGS_value=$CPPFLAGS + ac_env_CC_set=${CC+set} + ac_env_CC_value=$CC + ac_cv_env_CC_set=${CC+set} + ac_cv_env_CC_value=$CC + ac_env_CFLAGS_set=${CFLAGS+set} + ac_env_CFLAGS_value=$CFLAGS + ac_cv_env_CFLAGS_set=${CFLAGS+set} + ac_cv_env_CFLAGS_value=$CFLAGS + ac_env_CXXCPP_set=${CXXCPP+set} + ac_env_CXXCPP_value=$CXXCPP + ac_cv_env_CXXCPP_set=${CXXCPP+set} + ac_cv_env_CXXCPP_value=$CXXCPP + ac_env_CPP_set=${CPP+set} + ac_env_CPP_value=$CPP + ac_cv_env_CPP_set=${CPP+set} + ac_cv_env_CPP_value=$CPP + + # + # Report the --help message. + # + if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF + \`configure' configures this package to adapt to many kinds of systems. + + Usage: $0 [OPTION]... [VAR=VALUE]... + + To assign environment variables (e.g., CC, CFLAGS...), specify them as + VAR=VALUE. See below for descriptions of some of the useful variables. + + Defaults for the options are specified in brackets. + + Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + + _ACEOF + + cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + + By default, \`make install' will install all the files in + \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify + an installation prefix other than \`$ac_default_prefix' using \`--prefix', + for instance \`--prefix=\$HOME'. + + For better control, use the options below. + + Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] + _ACEOF + + cat <<\_ACEOF + + X features: + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR + + System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + _ACEOF + fi + + if test -n "$ac_init_help"; then + + cat <<\_ACEOF + + Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-install-relative=ARG enable installation relative to the source tree + --enable-use-rpath=ARG enable use of -rpath when linking + --enable-install-subdir=ARG enable installation in an ivtools sub-directory + + Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-ace=<path> Path to ACE include files + --with-ace-libs=<path> Path to ACE libraries + --with-clippoly=<path> Path to clippoly include file + --with-clippoly-libs=<path> Path to clippoly libraries + --with-fresco=<path> path to Fresco include files (not-used) + --with-fresco-libs=<path> path to compiled Fresco libs (not-used) + --with-iue=<path> path to IUE directory + --with-iue-libs=<path> path to compiled IUE libs + --with-qt=<path> path to QT directory + --with-qt-libs=<path> path to compiled QT libs + --with-x use the X Window System + + Some influential environment variables: + CXX C++ compiler command + CXXFLAGS C++ compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have + headers in a nonstandard directory <include dir> + CC C compiler command + CFLAGS C compiler flags + CXXCPP C++ preprocessor + CPP C preprocessor + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + + _ACEOF + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + + if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` + else + ac_dir_suffix= ac_top_builddir= + fi + + case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; + esac + # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be + # absolute. + ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` + ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` + ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` + ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done + fi + + test -n "$ac_init_help" && exit 0 + if $ac_init_version; then + cat <<\_ACEOF + + Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 + Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF + exit 0 fi ! exec 5>config.log ! cat >&5 <<_ACEOF ! This file contains any messages produced by compilers while ! running configure, to aid debugging if configure makes a mistake. ! ! It was created by $as_me, which was ! generated by GNU Autoconf 2.57. Invocation command line was ! ! $ $0 $@ ! ! _ACEOF ! { ! cat <<_ASUNAME ! ## --------- ## ! ## Platform. ## ! ## --------- ## ! ! hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` ! uname -m = `(uname -m) 2>/dev/null || echo unknown` ! uname -r = `(uname -r) 2>/dev/null || echo unknown` ! uname -s = `(uname -s) 2>/dev/null || echo unknown` ! uname -v = `(uname -v) 2>/dev/null || echo unknown` ! ! /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` ! /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` ! ! /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` ! /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` ! /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` ! hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ! /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` ! /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` ! /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` ! ! _ASUNAME ! ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! echo "PATH: $as_dir" ! done ! ! } >&5 ! ! cat >&5 <<_ACEOF ! ! ! ## ----------- ## ! ## Core tests. ## ! ## ----------- ## ! ! _ACEOF ! ! ! # Keep a trace of the command line. ! # Strip out --no-create and --no-recursion so they do not pile up. ! # Strip out --silent because we don't want to record it for future runs. ! # Also quote any args containing shell meta-characters. ! # Make two passes to allow for proper duplicate-argument suppression. ! ac_configure_args= ! ac_configure_args0= ! ac_configure_args1= ! ac_sep= ! ac_must_keep_next=false ! for ac_pass in 1 2 ! do ! for ac_arg ! do ! case $ac_arg in ! -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; ! -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ! | -silent | --silent | --silen | --sile | --sil) ! continue ;; ! *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ! ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ! esac ! case $ac_pass in ! 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ! 2) ! ac_configure_args1="$ac_configure_args1 '$ac_arg'" ! if test $ac_must_keep_next = true; then ! ac_must_keep_next=false # Got value, back to normal. ! else ! case $ac_arg in ! *=* | --config-cache | -C | -disable-* | --disable-* \ ! | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ ! | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ ! | -with-* | --with-* | -without-* | --without-* | --x) ! case "$ac_configure_args0 " in ! "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; ! esac ! ;; ! -* ) ac_must_keep_next=true ;; ! esac ! fi ! ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" ! # Get rid of the leading space. ! ac_sep=" " ! ;; ! esac ! done ! done ! $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } ! $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ! ! # When interrupted or exit'd, cleanup temporary files, and complete ! # config.log. We remove comments because anyway the quotes in there ! # would cause problems or look ugly. ! # WARNING: Be sure not to use single quotes in there, as some shells, ! # such as our DU 5.0 friend, will then `close' the trap. ! trap 'exit_status=$? ! # Save into config.log some information that might help in debugging. ! { ! echo ! ! cat <<\_ASBOX ! ## ---------------- ## ! ## Cache variables. ## ! ## ---------------- ## ! _ASBOX ! echo ! # The following way of writing the cache mishandles newlines in values, ! { ! (set) 2>&1 | ! case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in ! *ac_space=\ *) ! sed -n \ ! "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; ! s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/ \\1='"'"'\\2'"'"'/p" ! ;; ! *) ! sed -n \ ! "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ! ;; ! esac; ! } ! echo ! ! cat <<\_ASBOX ! ## ----------------- ## ! ## Output variables. ## ! ## ----------------- ## ! _ASBOX ! echo ! for ac_var in $ac_subst_vars ! do ! eval ac_val=$`echo $ac_var` ! echo "$ac_var='"'"'$ac_val'"'"'" ! done | sort ! echo ! ! if test -n "$ac_subst_files"; then ! cat <<\_ASBOX ! ## ------------- ## ! ## Output files. ## ! ## ------------- ## ! _ASBOX ! echo ! for ac_var in $ac_subst_files ! do ! eval ac_val=$`echo $ac_var` ! echo "$ac_var='"'"'$ac_val'"'"'" ! done | sort ! echo ! fi ! ! if test -s confdefs.h; then ! cat <<\_ASBOX ! ## ----------- ## ! ## confdefs.h. ## ! ## ----------- ## ! _ASBOX ! echo ! sed "/^$/d" confdefs.h | sort ! echo ! fi ! test "$ac_signal" != 0 && ! echo "$as_me: caught signal $ac_signal" ! echo "$as_me: exit $exit_status" ! } >&5 ! rm -f core core.* *.core && ! rm -rf conftest* confdefs* conf$$* $ac_clean_files && ! exit $exit_status ! ' 0 ! for ac_signal in 1 2 13 15; do ! trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ! done ! ac_signal=0 ! ! # confdefs.h avoids OS command line length limits that DEFS can exceed. ! rm -rf conftest* confdefs.h ! # AIX cpp loses on an empty file, so make sure it contains at least a newline. ! echo >confdefs.h ! ! # Predefined preprocessor variables. ! ! cat >>confdefs.h <<_ACEOF ! #define PACKAGE_NAME "$PACKAGE_NAME" ! _ACEOF ! ! ! cat >>confdefs.h <<_ACEOF ! #define PACKAGE_TARNAME "$PACKAGE_TARNAME" ! _ACEOF ! ! ! cat >>confdefs.h <<_ACEOF ! #define PACKAGE_VERSION "$PACKAGE_VERSION" ! _ACEOF + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_STRING "$PACKAGE_STRING" + _ACEOF + + + cat >>confdefs.h <<_ACEOF + #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" + _ACEOF + + + # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then *************** *** 510,550 **** fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then ! echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then ! echo "loading cache $cache_file" ! . $cache_file else ! echo "creating cache $cache_file" ! > $cache_file fi ac_ext=c - # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ! ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ! ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ! cross_compiling=$ac_cv_prog_cc_cross ! ! ac_exeext= ! ac_objext=o ! if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then ! # Stardent Vistra SVR4 grep lacks -e, says [email protected]. ! if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ! ac_n= ac_c=' ! ' ac_t=' ' ! else ! ac_n=-n ac_c= ac_t= ! fi ! else ! ac_n= ac_c='\c' ac_t= ! fi ac_aux_dir= for ac_dir in src/scripts $srcdir/src/scripts; do if test -f $ac_dir/install-sh; then --- 1160,1264 ---- fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then ! { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ! echo "$as_me: loading site script $ac_site_file" >&6;} ! sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then ! # Some versions of bash will fail to source /dev/null (special ! # files actually), so we avoid doing that. ! if test -f "$cache_file"; then ! { echo "$as_me:$LINENO: loading cache $cache_file" >&5 ! echo "$as_me: loading cache $cache_file" >&6;} ! case $cache_file in ! [\\/]* | ?:[\\/]* ) . $cache_file;; ! *) . ./$cache_file;; ! esac ! fi else ! { echo "$as_me:$LINENO: creating cache $cache_file" >&5 ! echo "$as_me: creating cache $cache_file" >&6;} ! >$cache_file ! fi ! ! # Check that the precious variables saved in the cache have kept the same ! # value. ! ac_cache_corrupted=false ! for ac_var in `(set) 2>&1 | ! sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ! eval ac_old_set=\$ac_cv_env_${ac_var}_set ! eval ac_new_set=\$ac_env_${ac_var}_set ! eval ac_old_val="\$ac_cv_env_${ac_var}_value" ! eval ac_new_val="\$ac_env_${ac_var}_value" ! case $ac_old_set,$ac_new_set in ! set,) ! { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ! echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ! ac_cache_corrupted=: ;; ! ,set) ! { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ! echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ! ac_cache_corrupted=: ;; ! ,);; ! *) ! if test "x$ac_old_val" != "x$ac_new_val"; then ! { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ! echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ! { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 ! echo "$as_me: former value: $ac_old_val" >&2;} ! { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 ! echo "$as_me: current value: $ac_new_val" >&2;} ! ac_cache_corrupted=: ! fi;; ! esac ! # Pass precious variables to config.status. ! if test "$ac_new_set" = set; then ! case $ac_new_val in ! *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ! ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ! *) ac_arg=$ac_var=$ac_new_val ;; ! esac ! case " $ac_configure_args " in ! *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. ! *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ! esac ! fi ! done ! if $ac_cache_corrupted; then ! { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ! echo "$as_me: error: changes in the environment can compromise the build" >&2;} ! { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ! echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ! { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + ac_aux_dir= for ac_dir in src/scripts $srcdir/src/scripts; do if test -f $ac_dir/install-sh; then *************** *** 555,600 **** ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then ! { echo "configure: error: can not find install-sh or install.sh in src/scripts $srcdir/src/scripts" 1>&2; exit 1; } ! fi ! ac_config_guess=$ac_aux_dir/config.guess ! ac_config_sub=$ac_aux_dir/config.sub ! ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # set the canonical host vars - # Make sure we can run config.sub. ! if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : ! else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } ! fi ! ! echo $ac_n "checking host system type""... $ac_c" 1>&6 ! echo "configure:576: checking host system type" >&5 ! ! host_alias=$host ! case "$host_alias" in ! NONE) ! case $nonopt in ! NONE) ! if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : ! else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } ! fi ;; ! *) host_alias=$nonopt ;; ! esac ;; ! esac - host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` - host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` - host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` - host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - echo "$ac_t""$host" 1>&6 case "$host" in ! *darwin* ) platform_part=darwin ;; *freebsd2.1.* ) platform_part=freebsd2.1 ;; *freebsd* ) platform_part=freebsd ;; *hpux*10*20) platform_part=hpux10.20 ;; --- 1269,1347 ---- ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break fi done if test -z "$ac_aux_dir"; then ! { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in src/scripts $srcdir/src/scripts" >&5 ! echo "$as_me: error: cannot find install-sh or install.sh in src/scripts $srcdir/src/scripts" >&2;} ! { (exit 1); exit 1; }; } ! fi ! ac_config_guess="$SHELL $ac_aux_dir/config.guess" ! ac_config_sub="$SHELL $ac_aux_dir/config.sub" ! ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # set the canonical host vars # Make sure we can run config.sub. ! $ac_config_sub sun4 >/dev/null 2>&1 || ! { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 ! echo "$as_me: error: cannot run $ac_config_sub" >&2;} ! { (exit 1); exit 1; }; } ! ! echo "$as_me:$LINENO: checking build system type" >&5 ! echo $ECHO_N "checking build system type... $ECHO_C" >&6 ! if test "${ac_cv_build+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_cv_build_alias=$build_alias ! test -z "$ac_cv_build_alias" && ! ac_cv_build_alias=`$ac_config_guess` ! test -z "$ac_cv_build_alias" && ! { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 ! echo "$as_me: error: cannot guess build type; you must specify one" >&2;} ! { (exit 1); exit 1; }; } ! ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || ! { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 ! echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} ! { (exit 1); exit 1; }; } ! ! fi ! echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ! echo "${ECHO_T}$ac_cv_build" >&6 ! build=$ac_cv_build ! build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ! build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ! build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ! ! ! echo "$as_me:$LINENO: checking host system type" >&5 ! echo $ECHO_N "checking host system type... $ECHO_C" >&6 ! if test "${ac_cv_host+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_cv_host_alias=$host_alias ! test -z "$ac_cv_host_alias" && ! ac_cv_host_alias=$ac_cv_build_alias ! ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || ! { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 ! echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} ! { (exit 1); exit 1; }; } ! ! fi ! echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ! echo "${ECHO_T}$ac_cv_host" >&6 ! host=$ac_cv_host ! host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ! host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` ! host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` case "$host" in ! *darwin* ) platform_part=darwin ;; *freebsd2.1.* ) platform_part=freebsd2.1 ;; *freebsd* ) platform_part=freebsd ;; *hpux*10*20) platform_part=hpux10.20 ;; *************** *** 615,631 **** esac # Check whether --with-ace or --without-ace was given. if test "${with_ace+set}" = set; then withval="$with_ace" ACE=$withval if test -f $ACE/ace/ACE.h ; then ! echo "$ac_t""Found ace/ACE.h in $ACE " 1>&6 else ! { echo "configure: error: Can not find ace/ACE.h in $ACE given with option --with-ace=$ACE " 1>&2; exit 1; } fi ! fi # Check whether --with-ace-libs or --without-ace-libs was given. --- 1362,1382 ---- esac + # Check whether --with-ace or --without-ace was given. if test "${with_ace+set}" = set; then withval="$with_ace" ACE=$withval if test -f $ACE/ace/ACE.h ; then ! echo "$as_me:$LINENO: result: Found ace/ACE.h in $ACE " >&5 ! echo "${ECHO_T}Found ace/ACE.h in $ACE " >&6 else ! { { echo "$as_me:$LINENO: error: Can not find ace/ACE.h in $ACE given with option --with-ace=$ACE " >&5 ! echo "$as_me: error: Can not find ace/ACE.h in $ACE given with option --with-ace=$ACE " >&2;} ! { (exit 1); exit 1; }; } fi ! fi; # Check whether --with-ace-libs or --without-ace-libs was given. *************** *** 633,640 **** withval="$with_ace_libs" ACE_LIBS=$withval ! fi ! ACE_ENABLED=0 if test x"$ACE" = x; then --- 1384,1390 ---- withval="$with_ace_libs" ACE_LIBS=$withval ! fi; ACE_ENABLED=0 if test x"$ACE" = x; then *************** *** 645,688 **** else echo "Building with ACE support ACE=$ACE" if test -f $ACE_LIBS/libACE.a -o -f $ACE_LIBS/libACE.so -o -f $ACE_LIBS/libACE.dylib ; then ! echo "$ac_t""Found libACE.* in $ACE_LIBS " 1>&6 ACE_ENABLED=1 else if test -f $ACE/ace/libACE.a -o -f $ACE/ace/libACE.so -o -f $ACE/ace/libACE.dylib ; then ! echo "$ac_t""Found libACE.* in $ACE/ace " 1>&6 ACE_ENABLED=1 ACE_LIBS=$ACE/ace else ! { echo "configure: error: Can not find libACE.a or libACE.so or libACE.dylib in $ACE_LIBS ($ACE). ! Use --with-ace-libs to specify location of ACE " 1>&2; exit 1; } fi fi fi # Check whether --with-clippoly or --without-clippoly was given. if test "${with_clippoly+set}" = set; then withval="$with_clippoly" CLIPPOLY=$withval if test -f $CLIPPOLY/poly.h ; then ! echo "$ac_t""Found poly.h in $CLIPPOLY " 1>&6 else ! { echo "configure: error: Can not find poly.h in $CLIPPOLY given with option --with-clippoly=$CLIPPOLY " 1>&2; exit 1; } ! fi ! fi # Check whether --with-clippoly-libs or --without-clippoly-libs was given. if test "${with_clippoly_libs+set}" = set; then withval="$with_clippoly_libs" CLIPPOLY_LIBS=$withval - - fi CLIPPOLY_ENABLED=0 if test x"$CLIPPOLY" = x; then --- 1395,1446 ---- else echo "Building with ACE support ACE=$ACE" if test -f $ACE_LIBS/libACE.a -o -f $ACE_LIBS/libACE.so -o -f $ACE_LIBS/libACE.dylib ; then ! echo "$as_me:$LINENO: result: Found libACE.* in $ACE_LIBS " >&5 ! echo "${ECHO_T}Found libACE.* in $ACE_LIBS " >&6 ACE_ENABLED=1 else if test -f $ACE/ace/libACE.a -o -f $ACE/ace/libACE.so -o -f $ACE/ace/libACE.dylib ; then ! echo "$as_me:$LINENO: result: Found libACE.* in $ACE/ace " >&5 ! echo "${ECHO_T}Found libACE.* in $ACE/ace " >&6 ACE_ENABLED=1 ACE_LIBS=$ACE/ace else ! { { echo "$as_me:$LINENO: error: Can not find libACE.a or libACE.so or libACE.dylib in $ACE_LIBS ($ACE). ! Use --with-ace-libs to specify location of ACE " >&5 ! echo "$as_me: error: Can not find libACE.a or libACE.so or libACE.dylib in $ACE_LIBS ($ACE). ! Use --with-ace-libs to specify location of ACE " >&2;} ! { (exit 1); exit 1; }; } fi fi fi + # Check whether --with-clippoly or --without-clippoly was given. if test "${with_clippoly+set}" = set; then withval="$with_clippoly" CLIPPOLY=$withval if test -f $CLIPPOLY/poly.h ; then ! echo "$as_me:$LINENO: result: Found poly.h in $CLIPPOLY " >&5 ! echo "${ECHO_T}Found poly.h in $CLIPPOLY " >&6 else ! { { echo "$as_me:$LINENO: error: Can not find poly.h in $CLIPPOLY given with option --with-clippoly=$CLIPPOLY " >&5 ! echo "$as_me: error: Can not find poly.h in $CLIPPOLY given with option --with-clippoly=$CLIPPOLY " >&2;} ! { (exit 1); exit 1; }; } ! fi ! fi; # Check whether --with-clippoly-libs or --without-clippoly-libs was given. if test "${with_clippoly_libs+set}" = set; then withval="$with_clippoly_libs" CLIPPOLY_LIBS=$withval + fi; CLIPPOLY_ENABLED=0 if test x"$CLIPPOLY" = x; then *************** *** 693,709 **** else echo "Building with clippoly support CLIPPOLY=$CLIPPOLY" if test -f $CLIPPOLY_LIBS/libclippoly.a -o -f $CLIPPOLY_LIBS/libclippoly.so -o -f $CLIPPOLY_LIBS/libclippoly.dylib ; then ! echo "$ac_t""Found libclippoly.* in $CLIPPOLY_LIBS " 1>&6 CLIPPOLY_ENABLED=1 else if test -f $CLIPPOLY/libclippoly.a -o -f $CLIPPOLY/libclippoly.so -o -f $CLIPPOLY/libclippoly.dylib ; then ! echo "$ac_t""Found libclippoly.* in $CLIPPOLY " 1>&6 CLIPPOLY_ENABLED=1 CLIPPOLY_LIBS=$CLIPPOLY else ! { echo "configure: error: Can not find libclippoly.a or libclippoly.so or libclippoly.dylib in $CLIPPOLY ($CLIPPOLY_LIBS) ! Use --with-clippoly-libs to specify location of clippoly libraries" 1>&2; exit 1; } fi fi fi --- 1451,1472 ---- else echo "Building with clippoly support CLIPPOLY=$CLIPPOLY" if test -f $CLIPPOLY_LIBS/libclippoly.a -o -f $CLIPPOLY_LIBS/libclippoly.so -o -f $CLIPPOLY_LIBS/libclippoly.dylib ; then ! echo "$as_me:$LINENO: result: Found libclippoly.* in $CLIPPOLY_LIBS " >&5 ! echo "${ECHO_T}Found libclippoly.* in $CLIPPOLY_LIBS " >&6 CLIPPOLY_ENABLED=1 else if test -f $CLIPPOLY/libclippoly.a -o -f $CLIPPOLY/libclippoly.so -o -f $CLIPPOLY/libclippoly.dylib ; then ! echo "$as_me:$LINENO: result: Found libclippoly.* in $CLIPPOLY " >&5 ! echo "${ECHO_T}Found libclippoly.* in $CLIPPOLY " >&6 CLIPPOLY_ENABLED=1 CLIPPOLY_LIBS=$CLIPPOLY else ! { { echo "$as_me:$LINENO: error: Can not find libclippoly.a or libclippoly.so or libclippoly.dylib in $CLIPPOLY ($CLIPPOLY_LIBS) ! Use --with-clippoly-libs to specify location of clippoly libraries" >&5 ! echo "$as_me: error: Can not find libclippoly.a or libclippoly.so or libclippoly.dylib in $CLIPPOLY ($CLIPPOLY_LIBS) ! Use --with-clippoly-libs to specify location of clippoly libraries" >&2;} ! { (exit 1); exit 1; }; } fi fi fi *************** *** 713,723 **** FRESCO_ENABLED=0 FRESCO="" FRESCOLIBS="" # Check whether --with-fresco or --without-fresco was given. if test "${with_fresco+set}" = set; then withval="$with_fresco" FRESCO=$withval ! if test x"$FRESCOLIBS" = x then if test -d "$FRESCO"/lib --- 1476,1487 ---- FRESCO_ENABLED=0 FRESCO="" FRESCOLIBS="" + # Check whether --with-fresco or --without-fresco was given. if test "${with_fresco+set}" = set; then withval="$with_fresco" FRESCO=$withval ! if test x"$FRESCOLIBS" = x then if test -d "$FRESCO"/lib *************** *** 728,742 **** fi fi ! fi # Check whether --with-fresco-libs or --without-fresco-libs was given. if test "${with_fresco_libs+set}" = set; then withval="$with_fresco_libs" ! FRESCOLIBS=$withval ! fi ! ## Check fresco --- 1492,1505 ---- fi fi ! fi; # Check whether --with-fresco-libs or --without-fresco-libs was given. if test "${with_fresco_libs+set}" = set; then withval="$with_fresco_libs" ! FRESCOLIBS=$withval ! fi; ## Check fresco *************** *** 774,784 **** IUE_ENABLED=0 IUE="" IUELIBS="" # Check whether --with-iue or --without-iue was given. if test "${with_iue+set}" = set; then withval="$with_iue" IUE=$withval ! if test x"$IUELIBS" = x then if test -d "$IUE"/lib --- 1537,1548 ---- IUE_ENABLED=0 IUE="" IUELIBS="" + # Check whether --with-iue or --without-iue was given. if test "${with_iue+set}" = set; then withval="$with_iue" IUE=$withval ! if test x"$IUELIBS" = x then if test -d "$IUE"/lib *************** *** 789,804 **** fi fi ! fi # Check whether --with-iue-libs or --without-iue-libs was given. if test "${with_iue_libs+set}" = set; then withval="$with_iue_libs" ! IUELIBS=$withval ! fi - ## Check iue if test x"$IUE" = x --- 1553,1567 ---- fi fi ! fi; # Check whether --with-iue-libs or --without-iue-libs was given. if test "${with_iue_libs+set}" = set; then withval="$with_iue_libs" ! IUELIBS=$withval ! fi; ## Check iue if test x"$IUE" = x *************** *** 831,967 **** IUE_ENABLED=1 fi - - # check of the c++ compiler - for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 - echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 - echo "configure:842: checking for $ac_word" >&5 - if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 - else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. - else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CXX="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" - fi - fi - CXX="$ac_cv_prog_CXX" - if test -n "$CXX"; then - echo "$ac_t""$CXX" 1>&6 - else - echo "$ac_t""no" 1>&6 - fi - - test -n "$CXX" && break - done - test -n "$CXX" || CXX="gcc" - ! echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 ! echo "configure:874: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ! ac_ext=C ! # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ! ac_cpp='$CXXCPP $CPPFLAGS' ! ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ! ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ! cross_compiling=$ac_cv_prog_cxx_cross ! cat > conftest.$ac_ext << EOF - #line 885 "configure" - #include "confdefs.h" ! int main(){return(0);} ! EOF ! if { (eval echo configure:890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ! ac_cv_prog_cxx_works=yes ! # If we can't run a trivial program, we are probably using a cross compiler. ! if (./conftest; exit) 2>/dev/null; then ! ac_cv_prog_cxx_cross=no ! else ! ac_cv_prog_cxx_cross=yes fi else ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_prog_cxx_works=no fi ! rm -fr conftest* ! ac_ext=c ! # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ! ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ! cross_compiling=$ac_cv_prog_cc_cross ! ! echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 ! if test $ac_cv_prog_cxx_works = no; then ! { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } ! fi ! echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 ! echo "configure:916: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 ! echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 ! cross_compiling=$ac_cv_prog_cxx_cross ! ! echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 ! echo "configure:921: checking whether we are using GNU C++" >&5 ! if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 ! else ! cat > conftest.C <<EOF ! #ifdef __GNUC__ ! yes; ! #endif ! EOF ! if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:930: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ! ac_cv_prog_gxx=yes else ! ac_cv_prog_gxx=no fi fi - echo "$ac_t""$ac_cv_prog_gxx" 1>&6 ! if test $ac_cv_prog_gxx = yes; then ! GXX=yes else ! GXX= fi ! ac_test_CXXFLAGS="${CXXFLAGS+set}" ! ac_save_CXXFLAGS="$CXXFLAGS" ! CXXFLAGS= ! echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 ! echo "configure:949: checking whether ${CXX-g++} accepts -g" >&5 ! if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else ! echo 'void f(){}' > conftest.cc ! if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then ac_cv_prog_cxx_g=yes else ! ac_cv_prog_cxx_g=no ! fi ! rm -f conftest* fi ! ! echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 if test "$ac_test_CXXFLAGS" = set; then ! CXXFLAGS="$ac_save_CXXFLAGS" elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" --- 1594,2077 ---- IUE_ENABLED=1 fi ! QT_ENABLED=0 ! QT="" ! QTLIBS="" ! ! # Check whether --with-qt or --without-qt was given. ! if test "${with_qt+set}" = set; then ! withval="$with_qt" ! QT=$withval ! if test x"$QTLIBS" = x ! then ! if test -d "$QT"/lib ! then ! QTLIBS=$QT/lib ! else ! QTLIBS=$QT/Build/lib ! fi ! fi ! fi; ! # Check whether --with-qt-libs or --without-qt-libs was given. ! if test "${with_qt_libs+set}" = set; then ! withval="$with_qt_libs" ! QTLIBS=$withval ! fi; ! ! ## Check qt ! ! if test x"$QT" = x ! then ! echo "" ! echo "No QT path specified." ! echo "Use --with-qt=<path> to point to QT installed directory." ! else ! if test ! -f "$QT"/include/qt.h ! then ! echo "" ! echo "Verify your QT environment and try it again." ! echo "(Couldn't find $QT/include/qt.h!)" ! ! echo "Use --with-qt=<path> to point to QT (or set it in the env)." ! echo "<path> points to the installed QT version or to a source tree." ! echo "You may also use --with-qt-libs to specify the lib directory." ! else ! QTINCS="$QT/include" ! fi ! ! if test ! -d "$QTLIBS" ! then ! echo "QT directory '$QTLIBS' does not exist (or is not readable)." ! echo "Use --with-qt-libs to point to it." ! fi ! echo "Building with QT support" ! echo "QT includes = $QTINCS" ! echo "QT libs = $QTLIBS" ! QT_ENABLED=1 ! fi ! ! ! # check of the c++ compiler ! ac_ext=cc ! ac_cpp='$CXXCPP $CPPFLAGS' ! ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ! if test -n "$ac_tool_prefix"; then ! for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ! do ! # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ! set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_CXX+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -n "$CXX"; then ! ac_cv_prog_CXX="$CXX" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 fi + done + done + + fi + fi + CXX=$ac_cv_prog_CXX + if test -n "$CXX"; then + echo "$as_me:$LINENO: result: $CXX" >&5 + echo "${ECHO_T}$CXX" >&6 else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 fi ! ! test -n "$CXX" && break ! done ! fi ! if test -z "$CXX"; then ! ac_ct_CXX=$CXX ! for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ! do ! # Extract the first word of "$ac_prog", so it can be a program name with args. ! set dummy $ac_prog; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else ! if test -n "$ac_ct_CXX"; then ! ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_ac_ct_CXX="$ac_prog" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! fi fi + ac_ct_CXX=$ac_cv_prog_ac_ct_CXX + if test -n "$ac_ct_CXX"; then + echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 + echo "${ECHO_T}$ac_ct_CXX" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + test -n "$ac_ct_CXX" && break + done + test -n "$ac_ct_CXX" || ac_ct_CXX="g++" + + CXX=$ac_ct_CXX + fi ! # Provide some information about the compiler. ! echo "$as_me:$LINENO:" \ ! "checking for C++ compiler version" >&5 ! ac_compiler=`set X $ac_compile; echo $2` ! { (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 ! (eval $ac_compiler --version </dev/null >&5) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } ! { (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 ! (eval $ac_compiler -v </dev/null >&5) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } ! { (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 ! (eval $ac_compiler -V </dev/null >&5) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } ! ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! ! int ! main () ! { ! ! ; ! return 0; ! } ! _ACEOF ! ac_clean_files_save=$ac_clean_files ! ac_clean_files="$ac_clean_files a.out a.exe b.out" ! # Try to create an executable without -o first, disregard a.out. ! # It will help us diagnose broken compilers, and finding out an intuition ! # of exeext. ! echo "$as_me:$LINENO: checking for C++ compiler default output" >&5 ! echo $ECHO_N "checking for C++ compiler default output... $ECHO_C" >&6 ! ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ! if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 ! (eval $ac_link_default) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; then ! # Find the output, starting from the most likely. This scheme is ! # not robust to junk in `.', hence go to wildcards (a.*) only as a last ! # resort. ! ! # Be careful to initialize this variable, since it used to be cached. ! # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ! ac_cv_exeext= ! # b.out is created by i960 compilers. ! for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ! do ! test -f "$ac_file" || continue ! case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ! ;; ! conftest.$ac_ext ) ! # This is the source file. ! ;; ! [ab].out ) ! # We found the default executable, but exeext='' is most ! # certainly right. ! break;; ! *.* ) ! ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ! # FIXME: I believe we export ac_cv_exeext for Libtool, ! # but it would be cool to find out if it's true. Does anybody ! # maintain Libtool? --akim. ! export ac_cv_exeext ! break;; ! * ) ! break;; ! esac ! done else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! { { echo "$as_me:$LINENO: error: C++ compiler cannot create executables ! See \`config.log' for more details." >&5 ! echo "$as_me: error: C++ compiler cannot create executables ! See \`config.log' for more details." >&2;} ! { (exit 77); exit 77; }; } ! fi ! ! ac_exeext=$ac_cv_exeext ! echo "$as_me:$LINENO: result: $ac_file" >&5 ! echo "${ECHO_T}$ac_file" >&6 ! ! # Check the compiler produces executables we can run. If not, either ! # the compiler is broken, or we cross compile. ! echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 ! echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6 ! # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 ! # If not cross compiling, check that we can run a simple program. ! if test "$cross_compiling" != yes; then ! if { ac_try='./$ac_file' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! cross_compiling=no ! else ! if test "$cross_compiling" = maybe; then ! cross_compiling=yes ! else ! { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. ! If you meant to cross compile, use \`--host'. ! See \`config.log' for more details." >&5 ! echo "$as_me: error: cannot run C++ compiled programs. ! If you meant to cross compile, use \`--host'. ! See \`config.log' for more details." >&2;} ! { (exit 1); exit 1; }; } ! fi ! fi fi + echo "$as_me:$LINENO: result: yes" >&5 + echo "${ECHO_T}yes" >&6 ! rm -f a.out a.exe conftest$ac_cv_exeext b.out ! ac_clean_files=$ac_clean_files_save ! # Check the compiler produces executables we can run. If not, either ! # the compiler is broken, or we cross compile. ! echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ! echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 ! echo "$as_me:$LINENO: result: $cross_compiling" >&5 ! echo "${ECHO_T}$cross_compiling" >&6 ! ! echo "$as_me:$LINENO: checking for suffix of executables" >&5 ! echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; then ! # If both `conftest.exe' and `conftest' are `present' (well, observable) ! # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will ! # work properly (i.e., refer to `conftest.exe'), while it won't with ! # `rm'. ! for ac_file in conftest.exe conftest conftest.*; do ! test -f "$ac_file" || continue ! case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ! *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ! export ac_cv_exeext ! break;; ! * ) break;; ! esac ! done else ! { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ! See \`config.log' for more details." >&5 ! echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ! See \`config.log' for more details." >&2;} ! { (exit 1); exit 1; }; } ! fi ! ! rm -f conftest$ac_cv_exeext ! echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ! echo "${ECHO_T}$ac_cv_exeext" >&6 ! ! rm -f conftest.$ac_ext ! EXEEXT=$ac_cv_exeext ! ac_exeext=$EXEEXT ! echo "$as_me:$LINENO: checking for suffix of object files" >&5 ! echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ! if test "${ac_cv_objext+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! ! int ! main () ! { ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.o conftest.obj ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; then ! for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ! case $ac_file in ! *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ! *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` ! break;; ! esac ! done ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ! See \`config.log' for more details." >&5 ! echo "$as_me: error: cannot compute suffix of object files: cannot compile ! See \`config.log' for more details." >&2;} ! { (exit 1); exit 1; }; } ! fi ! ! rm -f conftest.$ac_cv_objext conftest.$ac_ext ! fi ! echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ! echo "${ECHO_T}$ac_cv_objext" >&6 ! OBJEXT=$ac_cv_objext ! ac_objext=$OBJEXT ! echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 ! echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 ! if test "${ac_cv_cxx_compiler_gnu+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! ! int ! main () ! { ! #ifndef __GNUC__ ! choke me ! #endif ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_compiler_gnu=yes ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! ac_compiler_gnu=no ! fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! ac_cv_cxx_compiler_gnu=$ac_compiler_gnu ! ! fi ! echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 ! echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 ! GXX=`test $ac_compiler_gnu = yes && echo yes` ! ac_test_CXXFLAGS=${CXXFLAGS+set} ! ac_save_CXXFLAGS=$CXXFLAGS ! CXXFLAGS="-g" ! echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 ! echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 ! if test "${ac_cv_prog_cxx_g+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! ! int ! main () ! { ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ac_cv_prog_cxx_g=yes else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_prog_cxx_g=no fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! fi ! echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 ! echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 if test "$ac_test_CXXFLAGS" = set; then ! CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" *************** *** 975,1373 **** CXXFLAGS= fi fi # check for the c compiler ! # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 ! echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ! echo "configure:984: checking for $ac_word" >&5 ! if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ! IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ! ac_dummy="$PATH" ! for ac_dir in $ac_dummy; do ! test -z "$ac_dir" && ac_dir=. ! if test -f $ac_dir/$ac_word; then ! ac_cv_prog_CC="gcc" ! break ! fi ! done ! IFS="$ac_save_ifs" fi fi ! CC="$ac_cv_prog_CC" if test -n "$CC"; then ! echo "$ac_t""$CC" 1>&6 else ! echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 ! echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ! echo "configure:1014: checking for $ac_word" >&5 ! if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no ! ac_dummy="$PATH" ! for ac_dir in $ac_dummy; do ! test -z "$ac_dir" && ac_dir=. ! if test -f $ac_dir/$ac_word; then ! if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ! ac_prog_rejected=yes ! continue ! fi ! ac_cv_prog_CC="cc" ! break ! fi ! done ! IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift ! if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" shift ! ac_cv_prog_CC="$@" fi fi fi fi ! CC="$ac_cv_prog_CC" if test -n "$CC"; then ! echo "$ac_t""$CC" 1>&6 else ! echo "$ac_t""no" 1>&6 fi ! if test -z "$CC"; then ! case "`uname -s`" in ! *win32* | *WIN32*) ! # Extract the first word of "cl", so it can be a program name with args. ! set dummy cl; ac_word=$2 ! echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ! echo "configure:1065: checking for $ac_word" >&5 ! if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ! IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ! ac_dummy="$PATH" ! for ac_dir in $ac_dummy; do ! test -z "$ac_dir" && ac_dir=. ! if test -f $ac_dir/$ac_word; then ! ac_cv_prog_CC="cl" ! break ! fi ! done ! IFS="$ac_save_ifs" fi fi ! CC="$ac_cv_prog_CC" if test -n "$CC"; then ! echo "$ac_t""$CC" 1>&6 else ! echo "$ac_t""no" 1>&6 fi ! ;; ! esac fi ! test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi ! echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 ! echo "configure:1097: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ! ac_ext=c ! # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ! ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ! cross_compiling=$ac_cv_prog_cc_cross ! cat > conftest.$ac_ext << EOF ! #line 1108 "configure" ! #include "confdefs.h" ! main(){return(0);} ! EOF ! if { (eval echo configure:1113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ! ac_cv_prog_cc_works=yes ! # If we can't run a trivial program, we are probably using a cross compiler. ! if (./conftest; exit) 2>/dev/null; then ! ac_cv_prog_cc_cross=no else ! ac_cv_prog_cc_cross=yes fi else ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! ac_cv_prog_cc_works=no fi ! rm -fr conftest* ! ac_ext=c ! # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ! ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ! cross_compiling=$ac_cv_prog_cc_cross ! ! echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 ! if test $ac_cv_prog_cc_works = no; then ! { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } ! fi ! echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 ! echo "configure:1139: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 ! echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 ! cross_compiling=$ac_cv_prog_cc_cross ! ! echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 ! echo "configure:1144: checking whether we are using GNU C" >&5 ! if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 ! else ! cat > conftest.c <<EOF ! #ifdef __GNUC__ ! yes; ! #endif ! EOF ! if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1153: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ! ac_cv_prog_gcc=yes else ! ac_cv_prog_gcc=no fi fi ! echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - if test $ac_cv_prog_gcc = yes; then - GCC=yes else ! GCC= fi ! ac_test_CFLAGS="${CFLAGS+set}" ! ac_save_CFLAGS="$CFLAGS" ! CFLAGS= ! echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 ! echo "configure:1172: checking whether ${CC-cc} accepts -g" >&5 ! if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else ! echo 'void f(){}' > conftest.c ! if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ! ac_cv_prog_cc_g=yes else ! ac_cv_prog_cc_g=no fi ! rm -f conftest* fi ! echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 ! if test "$ac_test_CFLAGS" = set; then ! CFLAGS="$ac_save_CFLAGS" ! elif test $ac_cv_prog_cc_g = yes; then ! if test "$GCC" = yes; then ! CFLAGS="-g -O2" else ! CFLAGS="-g" fi else ! if test "$GCC" = yes; then ! CFLAGS="-O2" else ! CFLAGS= fi fi ! # check for CPP ! echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6 ! echo "configure:1205: checking how to run the C++ preprocessor" >&5 ! if test -z "$CXXCPP"; then ! if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else ! ac_ext=C ! # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ! ac_cpp='$CXXCPP $CPPFLAGS' ! ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ! ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ! cross_compiling=$ac_cv_prog_cxx_cross ! CXXCPP="${CXX-g++} -E" ! cat > conftest.$ac_ext <<EOF ! #line 1218 "configure" ! #include "confdefs.h" ! #include <stdlib.h> ! EOF ! ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ! { (eval echo configure:1223: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ! ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ! if test -z "$ac_err"; then : else ! echo "$ac_err" >&5 ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! CXXCPP=/lib/cpp fi ! rm -f conftest* ! ac_cv_prog_CXXCPP="$CXXCPP" ac_ext=c - # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ! ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ! ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ! cross_compiling=$ac_cv_prog_cc_cross ! fi ! fi ! CXXCPP="$ac_cv_prog_CXXCPP" ! echo "$ac_t""$CXXCPP" 1>&6 # check for ranlib ! # Extract the first word of "ranlib", so it can be a program name with args. ! set dummy ranlib; ac_word=$2 ! echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 ! echo "configure:1251: checking for $ac_word" >&5 ! if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else ! IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ! ac_dummy="$PATH" ! for ac_dir in $ac_dummy; do ! test -z "$ac_dir" && ac_dir=. ! if test -f $ac_dir/$ac_word; then ! ac_cv_prog_RANLIB="ranlib" ! break ! fi ! done ! IFS="$ac_save_ifs" ! test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi ! RANLIB="$ac_cv_prog_RANLIB" ! if test -n "$RANLIB"; then ! echo "$ac_t""$RANLIB" 1>&6 else ! echo "$ac_t""no" 1>&6 fi ! # check for X paths ! echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 ! echo "configure:1280: checking how to run the C preprocessor" >&5 ! # On Suns, sometimes $CPP names a directory. ! if test -n "$CPP" && test -d "$CPP"; then ! CPP= fi ! if test -z "$CPP"; then ! if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else ! # This must be in double quotes, not single quotes, because CPP may get ! # substituted into the Makefile and "${CC-cc}" will confuse make. ! CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, ! # not just through cpp. ! cat > conftest.$ac_ext <<EOF ! #line 1295 "configure" ! #include "confdefs.h" ! #include <assert.h> ! Syntax Error ! EOF ! ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ! { (eval echo configure:1301: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ! ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ! if test -z "$ac_err"; then ! : ! else ! echo "$ac_err" >&5 ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! CPP="${CC-cc} -E -traditional-cpp" ! cat > conftest.$ac_ext <<EOF ! #line 1312 "configure" ! #include "confdefs.h" ! #include <assert.h> ! Syntax Error ! EOF ! ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ! { (eval echo configure:1318: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ! ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ! if test -z "$ac_err"; then ! : else ! echo "$ac_err" >&5 ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! CPP="${CC-cc} -nologo -E" ! cat > conftest.$ac_ext <<EOF ! #line 1329 "configure" ! #include "confdefs.h" ! #include <assert.h> ! Syntax Error ! EOF ! ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ! { (eval echo configure:1335: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ! ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ! if test -z "$ac_err"; then : else ! echo "$ac_err" >&5 ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! CPP=/lib/cpp ! fi ! rm -f conftest* fi ! rm -f conftest* fi ! rm -f conftest* ! ac_cv_prog_CPP="$CPP" fi ! CPP="$ac_cv_prog_CPP" else ! ac_cv_prog_CPP="$CPP" fi ! echo "$ac_t""$CPP" 1>&6 ! # If we find X, set shell vars x_includes and x_libraries to the ! # paths, otherwise set no_x=yes. ! # Uses ac_ vars as temps to allow command line to override cache and checks. ! # --without-x overrides everything else, but does not touch the cache. ! echo $ac_n "checking for X""... $ac_c" 1>&6 ! echo "configure:1364: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then withval="$with_x" - : - fi # $have_x is `yes', `no', `disabled', or empty when we do not yet know. if test "x$with_x" = xno; then # The user explicitly disabled X. --- 2085,3409 ---- CXXFLAGS= fi fi + for ac_declaration in \ + ''\ + '#include <stdlib.h>' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' + do + cat >conftest.$ac_ext <<_ACEOF + #line $LINENO "configure" + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <stdlib.h> + $ac_declaration + int + main () + { + exit (42); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + continue + fi + rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF + #line $LINENO "configure" + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_declaration + int + main () + { + exit (42); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + fi + rm -f conftest.$ac_objext conftest.$ac_ext + done + rm -f conftest* + if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h + fi + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + # check for the c compiler ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! if test -n "$ac_tool_prefix"; then ! # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. ! set dummy ${ac_tool_prefix}gcc; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_CC+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -n "$CC"; then ! ac_cv_prog_CC="$CC" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_CC="${ac_tool_prefix}gcc" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! fi ! fi ! CC=$ac_cv_prog_CC ! if test -n "$CC"; then ! echo "$as_me:$LINENO: result: $CC" >&5 ! echo "${ECHO_T}$CC" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! fi ! if test -z "$ac_cv_prog_CC"; then ! ac_ct_CC=$CC ! # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + echo "${ECHO_T}$ac_ct_CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + CC=$ac_ct_CC + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_CC="${ac_tool_prefix}cc" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! fi fi ! CC=$ac_cv_prog_CC if test -n "$CC"; then ! echo "$as_me:$LINENO: result: $CC" >&5 ! echo "${ECHO_T}$CC" >&6 ! else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 ! fi ! ! fi ! if test -z "$ac_cv_prog_CC"; then ! ac_ct_CC=$CC ! # Extract the first word of "cc", so it can be a program name with args. ! set dummy cc; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -n "$ac_ct_CC"; then ! ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_ac_ct_CC="cc" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! ! fi ! fi ! ac_ct_CC=$ac_cv_prog_ac_ct_CC ! if test -n "$ac_ct_CC"; then ! echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ! echo "${ECHO_T}$ac_ct_CC" >&6 else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 fi + CC=$ac_ct_CC + else + CC="$ac_cv_prog_CC" + fi + + fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_CC+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ! ac_prog_rejected=yes ! continue ! fi ! ac_cv_prog_CC="cc" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift ! if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ! ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi ! CC=$ac_cv_prog_CC if test -n "$CC"; then ! echo "$as_me:$LINENO: result: $CC" >&5 ! echo "${ECHO_T}$CC" >&6 else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 fi ! fi ! if test -z "$CC"; then ! if test -n "$ac_tool_prefix"; then ! for ac_prog in cl ! do ! # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ! set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_CC+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_CC="$ac_tool_prefix$ac_prog" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 ! fi ! done ! done ! fi fi ! CC=$ac_cv_prog_CC if test -n "$CC"; then ! echo "$as_me:$LINENO: result: $CC" >&5 ! echo "${ECHO_T}$CC" >&6 else ! echo "$as_me:$LINENO: result: no" >&5 ! echo "${ECHO_T}no" >&6 fi ! ! test -n "$CC" && break ! done ! fi ! if test -z "$CC"; then ! ac_ct_CC=$CC ! for ac_prog in cl ! do ! # Extract the first word of "$ac_prog", so it can be a program name with args. ! set dummy $ac_prog; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_ac_ct_CC+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! if test -n "$ac_ct_CC"; then ! ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. ! else ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for ac_exec_ext in '' $ac_executable_extensions; do ! if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ! ac_cv_prog_ac_ct_CC="$ac_prog" ! echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ! break 2 fi ! done ! done ! ! fi fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + echo "${ECHO_T}$ac_ct_CC" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi ! test -n "$ac_ct_CC" && break ! done ! CC=$ac_ct_CC ! fi ! fi ! ! test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ! See \`config.log' for more details." >&5 ! echo "$as_me: error: no acceptable C compiler found in \$PATH ! See \`config.log' for more details." >&2;} ! { (exit 1); exit 1; }; } ! ! # Provide some information about the compiler. ! echo "$as_me:$LINENO:" \ ! "checking for C compiler version" >&5 ! ac_compiler=`set X $ac_compile; echo $2` ! { (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 ! (eval $ac_compiler --version </dev/null >&5) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } ! { (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 ! (eval $ac_compiler -v </dev/null >&5) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } ! { (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 ! (eval $ac_compiler -V </dev/null >&5) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } ! ! echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ! echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ! if test "${ac_cv_c_compiler_gnu+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! ! int ! main () ! { ! #ifndef __GNUC__ ! choke me ! #endif ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_compiler_gnu=yes ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! ac_compiler_gnu=no ! fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! ac_cv_c_compiler_gnu=$ac_compiler_gnu ! ! fi ! echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ! echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 ! GCC=`test $ac_compiler_gnu = yes && echo yes` ! ac_test_CFLAGS=${CFLAGS+set} ! ac_save_CFLAGS=$CFLAGS ! CFLAGS="-g" ! echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ! echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ! if test "${ac_cv_prog_cc_g+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! ! int ! main () ! { ! ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_prog_cc_g=yes ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! ac_cv_prog_cc_g=no ! fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! fi ! echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ! echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ! if test "$ac_test_CFLAGS" = set; then ! CFLAGS=$ac_save_CFLAGS ! elif test $ac_cv_prog_cc_g = yes; then ! if test "$GCC" = yes; then ! CFLAGS="-g -O2" else ! CFLAGS="-g" fi else ! if test "$GCC" = yes; then ! CFLAGS="-O2" ! else ! CFLAGS= ! fi fi ! echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 ! echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 ! if test "${ac_cv_prog_cc_stdc+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 ! else ! ac_cv_prog_cc_stdc=no ! ac_save_CC=$CC ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include <stdarg.h> ! #include <stdio.h> ! #include <sys/types.h> ! #include <sys/stat.h> ! /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ ! struct buf { int x; }; ! FILE * (*rcsopen) (struct buf *, struct stat *, int); ! static char *e (p, i) ! char **p; ! int i; ! { ! return p[i]; ! } ! static char *f (char * (*g) (char **, int), char **p, ...) ! { ! char *s; ! va_list v; ! va_start (v,p); ! s = g (p, va_arg (v,int)); ! va_end (v); ! return s; ! } ! int test (int i, double x); ! struct s1 {int (*f) (int a);}; ! struct s2 {int (*f) (double a);}; ! int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); ! int argc; ! char **argv; ! int ! main () ! { ! return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ! ; ! return 0; ! } ! _ACEOF ! # Don't try gcc -ansi; that turns off useful extensions and ! # breaks some systems' header files. ! # AIX -qlanglvl=ansi ! # Ultrix and OSF/1 -std1 ! # HP-UX 10.20 and later -Ae ! # HP-UX older versions -Aa -D_HPUX_SOURCE ! # SVR4 -Xc -D__EXTENSIONS__ ! for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ! do ! CC="$ac_save_CC $ac_arg" ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_prog_cc_stdc=$ac_arg ! break else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! fi ! rm -f conftest.$ac_objext ! done ! rm -f conftest.$ac_ext conftest.$ac_objext ! CC=$ac_save_CC ! fi + + case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 + echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 + echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; + esac + + # Some people use a C++ compiler to compile C. Since we use `exit', + # in C++ we need to declare it. In case someone uses the same compiler + # for both compiling C and C++ we need to have the C++ compiler decide + # the declaration of exit, since it's the most demanding environment. + cat >conftest.$ac_ext <<_ACEOF + #ifndef __cplusplus + choke me + #endif + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + ''\ + '#include <stdlib.h>' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' + do + cat >conftest.$ac_ext <<_ACEOF + #line $LINENO "configure" + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <stdlib.h> + $ac_declaration + int + main () + { + exit (42); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + continue fi + rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF + #line $LINENO "configure" + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_declaration + int + main () + { + exit (42); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 ! fi ! rm -f conftest.$ac_objext conftest.$ac_ext ! done ! rm -f conftest* ! if test -n "$ac_declaration"; then ! echo '#ifdef __cplusplus' >>confdefs.h ! echo $ac_declaration >>confdefs.h ! echo '#endif' >>confdefs.h ! fi else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! fi + rm -f conftest.$ac_objext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu ! # check for CPP ! ac_ext=cc ! ac_cpp='$CXXCPP $CPPFLAGS' ! ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ! echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 ! echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 ! if test -z "$CXXCPP"; then ! if test "${ac_cv_prog_CXXCPP+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else ! # Double quotes because CXXCPP needs to be expanded ! for CXXCPP in "$CXX -E" "/lib/cpp" ! do ! ac_preproc_ok=false ! for ac_cxx_preproc_warn_flag in '' yes ! do ! # Use a header file that comes with gcc, so configuring glibc ! # with a fresh cross-compiler works. ! # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since ! # <limits.h> exists even on freestanding compilers. ! # On the NeXT, cc -E runs the code through the compiler's parser, ! # not just through cpp. "Syntax error" is here to catch this case. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #ifdef __STDC__ ! # include <limits.h> ! #else ! # include <assert.h> ! #endif ! Syntax error ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_cxx_preproc_warn_flag ! else ! ac_cpp_err= ! fi else ! ac_cpp_err=yes fi ! if test -z "$ac_cpp_err"; then ! : ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. + continue fi + rm -f conftest.err conftest.$ac_ext ! # OK, works on sane cases. Now check whether non-existent headers ! # can be detected and how. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include <ac_nonexistent.h> ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_cxx_preproc_warn_flag else ! ac_cpp_err= fi else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! # Broken: success on invalid input. ! continue ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Passes both tests. ! ac_preproc_ok=: ! break ! fi ! rm -f conftest.err conftest.$ac_ext ! ! done ! # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ! rm -f conftest.err conftest.$ac_ext ! if $ac_preproc_ok; then ! break ! fi ! ! done ! ac_cv_prog_CXXCPP=$CXXCPP ! ! fi ! CXXCPP=$ac_cv_prog_CXXCPP ! else ! ac_cv_prog_CXXCPP=$CXXCPP ! fi ! echo "$as_me:$LINENO: result: $CXXCPP" >&5 ! echo "${ECHO_T}$CXXCPP" >&6 ! ac_preproc_ok=false ! for ac_cxx_preproc_warn_flag in '' yes ! do ! # Use a header file that comes with gcc, so configuring glibc ! # with a fresh cross-compiler works. ! # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since ! # <limits.h> exists even on freestanding compilers. ! # On the NeXT, cc -E runs the code through the compiler's parser, ! # not just through cpp. "Syntax error" is here to catch this case. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #ifdef __STDC__ ! # include <limits.h> ! #else ! # include <assert.h> ! #endif ! Syntax error ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_cxx_preproc_warn_flag else ! ac_cpp_err= fi + else + ac_cpp_err=yes fi + if test -z "$ac_cpp_err"; then + : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 ! # Broken: fails on valid input. ! continue ! fi ! rm -f conftest.err conftest.$ac_ext ! ! # OK, works on sane cases. Now check whether non-existent headers ! # can be detected and how. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include <ac_nonexistent.h> ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_cxx_preproc_warn_flag ! else ! ac_cpp_err= ! fi else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then ! # Broken: success on invalid input. ! continue ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Passes both tests. ! ac_preproc_ok=: ! break ! fi ! rm -f conftest.err conftest.$ac_ext ! ! done ! # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ! rm -f conftest.err conftest.$ac_ext ! if $ac_preproc_ok; then : else ! { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check ! See \`config.log' for more details." >&5 ! echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check ! See \`config.log' for more details." >&2;} ! { (exit 1); exit 1; }; } fi ! ac_ext=c ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu # check for ranlib ! if test -n "$ac_tool_prefix"; then ! # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ! set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ! echo "$as_me:$LINENO: checking for $ac_word" >&5 ! echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ! if test "${ac_cv_prog_RANLIB+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + fi + fi + RANLIB=$ac_cv_prog_RANLIB + if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 + echo "${ECHO_T}$RANLIB" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + fi + if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. + set dummy ranlib; ac_word=$2 + echo "$as_me:$LINENO: checking for $ac_word" >&5 + echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + fi + fi + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB + if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 + echo "${ECHO_T}$ac_ct_RANLIB" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 + echo "${ECHO_T}no" >&6 + fi + + RANLIB=$ac_ct_RANLIB + else + RANLIB="$ac_cv_prog_RANLIB" + fi + + # check for X paths + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 + echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= + fi + if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF + #line $LINENO "configure" + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #ifdef __STDC__ + # include <limits.h> + #else + # include <assert.h> + #endif + Syntax error + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes + fi + if test -z "$ac_cpp_err"; then + : else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Broken: fails on valid input. ! continue fi + rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + #line $LINENO "configure" + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <ac_nonexistent.h> + _ACEOF + if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi + else + ac_cpp_err=yes fi ! if test -z "$ac_cpp_err"; then ! # Broken: success on invalid input. ! continue else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Passes both tests. ! ac_preproc_ok=: ! break fi + rm -f conftest.err conftest.$ac_ext ! done ! # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ! rm -f conftest.err conftest.$ac_ext ! if $ac_preproc_ok; then ! break fi ! ! done ! ac_cv_prog_CPP=$CPP ! ! fi ! CPP=$ac_cv_prog_CPP else ! ac_cv_prog_CPP=$CPP ! fi ! echo "$as_me:$LINENO: result: $CPP" >&5 ! echo "${ECHO_T}$CPP" >&6 ! ac_preproc_ok=false ! for ac_c_preproc_warn_flag in '' yes ! do ! # Use a header file that comes with gcc, so configuring glibc ! # with a fresh cross-compiler works. ! # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since ! # <limits.h> exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, ! # not just through cpp. "Syntax error" is here to catch this case. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #ifdef __STDC__ ! # include <limits.h> ! #else ! # include <assert.h> ! #endif ! Syntax error ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then : else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Broken: fails on valid input. ! continue fi ! rm -f conftest.err conftest.$ac_ext ! ! # OK, works on sane cases. Now check whether non-existent headers ! # can be detected and how. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include <ac_nonexistent.h> ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes fi ! if test -z "$ac_cpp_err"; then ! # Broken: success on invalid input. ! continue ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! # Passes both tests. ! ac_preproc_ok=: ! break fi ! rm -f conftest.err conftest.$ac_ext ! ! done ! # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ! rm -f conftest.err conftest.$ac_ext ! if $ac_preproc_ok; then ! : else ! { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ! See \`config.log' for more details." >&5 ! echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ! See \`config.log' for more details." >&2;} ! { (exit 1); exit 1; }; } fi ! ! ac_ext=c ! ac_cpp='$CPP $CPPFLAGS' ! ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ! ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ! ac_compiler_gnu=$ac_cv_c_compiler_gnu ! ! echo "$as_me:$LINENO: checking for X" >&5 ! echo $ECHO_N "checking for X... $ECHO_C" >&6 + # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then withval="$with_x" + fi; # $have_x is `yes', `no', `disabled', or empty when we do not yet know. if test "x$with_x" = xno; then # The user explicitly disabled X. *************** *** 1377,1569 **** # Both variables are already set. have_x=yes else ! if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else # One or both of the vars are not set, and there is no cached value. ! ac_x_includes=NO ac_x_libraries=NO ! rm -fr conftestdir ! if mkdir conftestdir; then ! cd conftestdir # Make sure to not put "make" in the Imakefile rules, since we grep it out. ! cat > Imakefile <<'EOF' acfindx: @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' ! EOF if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl; do if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && ! test -f $ac_im_libdir/libX11.$ac_extension; then ac_im_usrlibdir=$ac_im_libdir; break fi done # Screen out bogus values from the imake configuration. They are # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. ! case "$ac_im_incroot" in /usr/include) ;; ! *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; esac ! case "$ac_im_usrlibdir" in /usr/lib | /lib) ;; ! *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; esac fi cd .. ! rm -fr conftestdir fi ! if test "$ac_x_includes" = NO; then ! # Guess where to find include files, by looking for this one X11 .h file. ! test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. ! cat > conftest.$ac_ext <<EOF ! #line 1426 "configure" ! #include "confdefs.h" ! #include <$x_direct_test_include> ! EOF ! ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" ! { (eval echo configure:1431: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ! ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` ! if test -z "$ac_err"; then ! rm -rf conftest* # We can compile using X headers with no special include directory. ac_x_includes= else ! echo "$ac_err" >&5 ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! # Look for the header file in a standard set of common directories. ! # Check X11 before X11Rn because it is often a symlink to the current release. ! for ac_dir in \ ! /usr/X11/include \ ! /usr/X11R6/include \ ! /usr/X11R5/include \ ! /usr/X11R4/include \ ! \ ! /usr/include/X11 \ ! /usr/include/X11R6 \ ! /usr/include/X11R5 \ ! /usr/include/X11R4 \ ! \ ! /usr/local/X11/include \ ! /usr/local/X11R6/include \ ! /usr/local/X11R5/include \ ! /usr/local/X11R4/include \ ! \ ! /usr/local/include/X11 \ ! /usr/local/include/X11R6 \ ! /usr/local/include/X11R5 \ ! /usr/local/include/X11R4 \ ! \ ! /usr/X386/include \ ! /usr/x386/include \ ! /usr/XFree86/include/X11 \ ! \ ! /usr/include \ ! /usr/local/include \ ! /usr/unsupported/include \ ! /usr/athena/include \ ! /usr/local/x11r5/include \ ! /usr/lpp/Xamples/include \ ! \ ! /usr/openwin/include \ ! /usr/openwin/share/include \ ! ; \ ! do ! if test -r "$ac_dir/$x_direct_test_include"; then ! ac_x_includes=$ac_dir ! break ! fi ! done fi ! rm -f conftest* ! fi # $ac_x_includes = NO ! if test "$ac_x_libraries" = NO; then # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - # See if we find them without any special options. # Don't add to $LIBS permanently. ! ac_save_LIBS="$LIBS" ! LIBS="-l$x_direct_test_library $LIBS" ! cat > conftest.$ac_ext <<EOF ! #line 1500 "configure" ! #include "confdefs.h" ! ! int main() { ! ${x_direct_test_function}() ! ; return 0; } ! EOF ! if { (eval echo configure:1507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ! rm -rf conftest* ! LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries= else ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! LIBS="$ac_save_LIBS" ! # First see if replacing the include by lib works. ! # Check X11 before X11Rn because it is often a symlink to the current release. ! for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ ! /usr/X11/lib \ ! /usr/X11R6/lib \ ! /usr/X11R5/lib \ ! /usr/X11R4/lib \ ! \ ! /usr/lib/X11 \ ! /usr/lib/X11R6 \ ! /usr/lib/X11R5 \ ! /usr/lib/X11R4 \ ! \ ! /usr/local/X11/lib \ ! /usr/local/X11R6/lib \ ! /usr/local/X11R5/lib \ ! /usr/local/X11R4/lib \ ! \ ! /usr/local/lib/X11 \ ! /usr/local/lib/X11R6 \ ! /usr/local/lib/X11R5 \ ! /usr/local/lib/X11R4 \ ! \ ! /usr/X386/lib \ ! /usr/x386/lib \ ! /usr/XFree86/lib/X11 \ ! \ ! /usr/lib \ ! /usr/local/lib \ ! /usr/unsupported/lib \ ! /usr/athena/lib \ ! /usr/local/x11r5/lib \ ! /usr/lpp/Xamples/lib \ ! /lib/usr/lib/X11 \ ! \ ! /usr/openwin/lib \ ! /usr/openwin/share/lib \ ! ; \ do for ac_extension in a so sl; do ! if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done fi ! rm -f conftest* ! fi # $ac_x_libraries = NO ! if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then # Didn't find X anywhere. Cache the known absence of X. ac_cv_have_x="have_x=no" else --- 3413,3596 ---- # Both variables are already set. have_x=yes else ! if test "${ac_cv_have_x+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else # One or both of the vars are not set, and there is no cached value. ! ac_x_includes=no ac_x_libraries=no ! rm -fr conftest.dir ! if mkdir conftest.dir; then ! cd conftest.dir # Make sure to not put "make" in the Imakefile rules, since we grep it out. ! cat >Imakefile <<'_ACEOF' acfindx: @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' ! _ACEOF if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl; do if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && ! test -f $ac_im_libdir/libX11.$ac_extension; then ac_im_usrlibdir=$ac_im_libdir; break fi done # Screen out bogus values from the imake configuration. They are # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. ! case $ac_im_incroot in /usr/include) ;; ! *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; esac ! case $ac_im_usrlibdir in /usr/lib | /lib) ;; ! *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; esac fi cd .. ! rm -fr conftest.dir fi + + # Standard set of common directories for X headers. + # Check X11 before X11Rn because it is often a symlink to the current release. + ac_x_header_dirs=' + /usr/X11/include + /usr/X11R6/include + /usr/X11R5/include + /usr/X11R4/include + + /usr/include/X11 + /usr/include/X11R6 + /usr/include/X11R5 + /usr/include/X11R4 + + /usr/local/X11/include + /usr/local/X11R6/include + /usr/local/X11R5/include + /usr/local/X11R4/include + + /usr/local/include/X11 + /usr/local/include/X11R6 + /usr/local/include/X11R5 + /usr/local/include/X11R4 + + /usr/X386/include + /usr/x386/include + /usr/XFree86/include/X11 + + /usr/include + /usr/local/include + /usr/unsupported/include + /usr/athena/include + /usr/local/x11r5/include + /usr/lpp/Xamples/include ! /usr/openwin/include ! /usr/openwin/share/include' + if test "$ac_x_includes" = no; then + # Guess where to find include files, by looking for Intrinsic.h. # First, try using that file with no special directory specified. ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include <X11/Intrinsic.h> ! _ACEOF ! if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 ! (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ! ac_status=$? ! grep -v '^ *+' conftest.er1 >conftest.err ! rm -f conftest.er1 ! cat conftest.err >&5 ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } >/dev/null; then ! if test -s conftest.err; then ! ac_cpp_err=$ac_c_preproc_warn_flag ! else ! ac_cpp_err= ! fi ! else ! ac_cpp_err=yes ! fi ! if test -z "$ac_cpp_err"; then # We can compile using X headers with no special include directory. ac_x_includes= else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! for ac_dir in $ac_x_header_dirs; do ! if test -r "$ac_dir/X11/Intrinsic.h"; then ! ac_x_includes=$ac_dir ! break ! fi ! done fi ! rm -f conftest.err conftest.$ac_ext ! fi # $ac_x_includes = no ! if test "$ac_x_libraries" = no; then # Check for the libraries. # See if we find them without any special options. # Don't add to $LIBS permanently. ! ac_save_LIBS=$LIBS ! LIBS="-lXt $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! #include <X11/Intrinsic.h> ! int ! main () ! { ! XtMalloc (0) ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! LIBS=$ac_save_LIBS # We can link X programs with no special library path. ac_x_libraries= else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! LIBS=$ac_save_LIBS ! for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` do + # Don't even attempt the hair of trying to link an X program! for ac_extension in a so sl; do ! if test -r $ac_dir/libXt.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! fi # $ac_x_libraries = no ! if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then # Didn't find X anywhere. Cache the known absence of X. ac_cv_have_x="have_x=no" else *************** *** 1572,1583 **** ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" fi fi fi eval "$ac_cv_have_x" fi # $with_x != no if test "$have_x" != yes; then ! echo "$ac_t""$have_x" 1>&6 no_x=yes else # If each of the values was on the command line, it overrides each guess. --- 3599,3612 ---- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" fi fi + fi eval "$ac_cv_have_x" fi # $with_x != no if test "$have_x" != yes; then ! echo "$as_me:$LINENO: result: $have_x" >&5 ! echo "${ECHO_T}$have_x" >&6 no_x=yes else # If each of the values was on the command line, it overrides each guess. *************** *** 1586,1721 **** # Update the cache value to reflect the command line values. ac_cv_have_x="have_x=yes \ ac_x_includes=$x_includes ac_x_libraries=$x_libraries" ! echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 fi # check for bool support in c++ #AC_CXX_BOOL # check for c++ standard headers #AC_CXX_HEADERS ! ! echo $ac_n "checking for directory to install c++ include files""... $ac_c" 1>&6 ! echo "configure:1599: checking for directory to install c++ include files" >&5 ! if eval "test \"`echo '$''{'ice_cv_cxx_include_dir'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 ! else ! ! cat > conftest.cc << EOF ! #include <iostream.h> ! EOF ! $CXXCPP $DEFS conftest.cc > conftest.ii 2>&5 ! if test $? != 0; then ! { echo "configure: error: ${CXXCPP} could not find iostream.h" 1>&2; exit 1; } ! else ! ice_file=`grep '^# 1' conftest.ii | grep iostream.h | \ ! head -1 | sed 's/^.*"\(.*\)".*$/\1/'` ! ice_cv_cxx_include_dir=`echo $ice_file | sed 's%iostream.h%%'` ! fi ! if test "$ice_cv_cxx_include_dir" = ""; then ! ice_cv_cxx_include_dir="$prefix/include" ! for pfx in "$prefix" "$exec_prefix"; do ! for dir in "$pfx/lib/g++-include" "$pfx/include/CC" \ ! "$pfx/include" /usr/include /usr/local/include/g++-v3 /usr/local/include/g++-3 /usr/local/include/g++-2 ; do ! if test -d "$dir"; then ! ice_cv_cxx_include_dir="$dir" ! break ! fi ! done ! done ! fi ! rm -f conftest.cc conftest.ii ! ! fi ! ! CXX_INCLUDE_DIR=$ice_cv_cxx_include_dir ! echo "$ac_t""${CXX_INCLUDE_DIR}" 1>&6 ! ! # check for EGCS or gcc 2.8.x #AC_CXX_EGCS # check for gettimeofday #AC_TWO_ARG_TIMEOFDAY # check for libstdc++ ! echo $ac_n "checking for peek__7istream in -lstdc++""... $ac_c" 1>&6 ! echo "configure:1641: checking for peek__7istream in -lstdc++" >&5 ! ac_lib_var=`echo stdc++'_'peek__7istream | sed 'y%./+-%__p_%'` ! if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else ! ac_save_LIBS="$LIBS" LIBS="-lstdc++ $LIBS" ! cat > conftest.$ac_ext <<EOF ! #line 1649 "configure" ! #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char peek__7istream(); ! ! int main() { ! peek__7istream() ! ; return 0; } ! EOF ! if { (eval echo configure:1660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ! rm -rf conftest* ! eval "ac_cv_lib_$ac_lib_var=yes" ! else ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! eval "ac_cv_lib_$ac_lib_var=no" ! fi ! rm -f conftest* ! LIBS="$ac_save_LIBS" ! ! fi ! if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then ! echo "$ac_t""yes" 1>&6 LIBSTDCPLUSPLUS2=1 else ! echo "$ac_t""no" 1>&6 ! LIBSTDCPLUSPLUS2=0 fi ! echo $ac_n "checking for _ZNSi4peekEv in -lstdc++""... $ac_c" 1>&6 ! echo "configure:1682: checking for _ZNSi4peekEv in -lstdc++" >&5 ! ac_lib_var=`echo stdc++'_'_ZNSi4peekEv | sed 'y%./+-%__p_%'` ! if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 else ! ac_save_LIBS="$LIBS" LIBS="-lstdc++ $LIBS" ! cat > conftest.$ac_ext <<EOF ! #line 1690 "configure" ! #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char _ZNSi4peekEv(); ! ! int main() { ! _ZNSi4peekEv() ! ; return 0; } ! EOF ! if { (eval echo configure:1701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ! rm -rf conftest* ! eval "ac_cv_lib_$ac_lib_var=yes" ! else ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! eval "ac_cv_lib_$ac_lib_var=no" ! fi ! rm -f conftest* ! LIBS="$ac_save_LIBS" ! ! fi ! if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then ! echo "$ac_t""yes" 1>&6 LIBSTDCPLUSPLUS3=1 else ! echo "$ac_t""no" 1>&6 ! LIBSTDCPLUSPLUS3=0 fi --- 3615,3752 ---- # Update the cache value to reflect the command line values. ac_cv_have_x="have_x=yes \ ac_x_includes=$x_includes ac_x_libraries=$x_libraries" ! echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ! echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 fi # check for bool support in c++ #AC_CXX_BOOL # check for c++ standard headers #AC_CXX_HEADERS ! #ICE_CXX_INCLUDE_DIR # check for EGCS or gcc 2.8.x #AC_CXX_EGCS # check for gettimeofday #AC_TWO_ARG_TIMEOFDAY # check for libstdc++ ! echo "$as_me:$LINENO: checking for peek__7istream in -lstdc++" >&5 ! echo $ECHO_N "checking for peek__7istream in -lstdc++... $ECHO_C" >&6 ! if test "${ac_cv_lib_stdcpp_peek__7istream+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else ! ac_check_lib_save_LIBS=$LIBS LIBS="-lstdc++ $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char peek__7istream (); ! int ! main () ! { ! peek__7istream (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_stdcpp_peek__7istream=yes ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! ac_cv_lib_stdcpp_peek__7istream=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_stdcpp_peek__7istream" >&5 ! echo "${ECHO_T}$ac_cv_lib_stdcpp_peek__7istream" >&6 ! if test $ac_cv_lib_stdcpp_peek__7istream = yes; then LIBSTDCPLUSPLUS2=1 else ! LIBSTDCPLUSPLUS2=0 fi ! echo "$as_me:$LINENO: checking for _ZNSi4peekEv in -lstdc++" >&5 ! echo $ECHO_N "checking for _ZNSi4peekEv in -lstdc++... $ECHO_C" >&6 ! if test "${ac_cv_lib_stdcpp__ZNSi4peekEv+set}" = set; then ! echo $ECHO_N "(cached) $ECHO_C" >&6 else ! ac_check_lib_save_LIBS=$LIBS LIBS="-lstdc++ $LIBS" ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ ! /* Override any gcc2 internal prototype to avoid an error. */ + #ifdef __cplusplus + extern "C" + #endif /* We use char because int might match the return type of a gcc2 ! builtin and then its argument prototype would still apply. */ ! char _ZNSi4peekEv (); ! int ! main () ! { ! _ZNSi4peekEv (); ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext conftest$ac_exeext ! if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ! (eval $ac_link) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest$ac_exeext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ! ac_cv_lib_stdcpp__ZNSi4peekEv=yes ! else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 ! ! ac_cv_lib_stdcpp__ZNSi4peekEv=no ! fi ! rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ! LIBS=$ac_check_lib_save_LIBS ! fi ! echo "$as_me:$LINENO: result: $ac_cv_lib_stdcpp__ZNSi4peekEv" >&5 ! echo "${ECHO_T}$ac_cv_lib_stdcpp__ZNSi4peekEv" >&6 ! if test $ac_cv_lib_stdcpp__ZNSi4peekEv = yes; then LIBSTDCPLUSPLUS3=1 else ! LIBSTDCPLUSPLUS3=0 fi *************** *** 1758,1767 **** fi if test -f config/$host_frag; then ! echo "$ac_t""found config/$host_frag " 1>&6 else ! echo "$ac_t""no config/$host_frag this must be a new architecture." 1>&6 ! { echo "configure: error: please create config/$host_frag." 1>&2; exit 1; } fi --- 3789,3802 ---- fi if test -f config/$host_frag; then ! echo "$as_me:$LINENO: result: found config/$host_frag " >&5 ! echo "${ECHO_T}found config/$host_frag " >&6 else ! echo "$as_me:$LINENO: result: no config/$host_frag this must be a new architecture." >&5 ! echo "${ECHO_T}no config/$host_frag this must be a new architecture." >&6 ! { { echo "$as_me:$LINENO: error: please create config/$host_frag." >&5 ! echo "$as_me: error: please create config/$host_frag." >&2;} ! { (exit 1); exit 1; }; } fi *************** *** 1774,1835 **** INSTALLRELATIVE=YES else INSTALLRELATIVE=NO ! fi - # Check whether --enable-use-rpath or --disable-use-rpath was given. if test "${enable_use_rpath+set}" = set; then enableval="$enable_use_rpath" USERPATH=YES else USERPATH=NO ! fi - # Check whether --enable-install-subdir or --disable-install-subdir was given. if test "${enable_install_subdir+set}" = set; then enableval="$enable_install_subdir" INSTALLSUBDIR=YES else INSTALLSUBDIR=NO ! fi - # AC_TRY_RUN(int access(); int main() { return access("/bin/bash", 1); },BIN_BASH=1,BIN_BASH=0,BIN_BASH=1) ! echo $ac_n "checking for socklen_t""... $ac_c" 1>&6 ! echo "configure:1802: checking for socklen_t" >&5 ! if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then ! echo $ac_n "(cached) $ac_c" 1>&6 ! else ! ! cat > conftest.$ac_ext <<EOF ! #line 1808 "configure" ! #include "confdefs.h" #include <sys/types.h> #include <sys/socket.h> ! int main() { socklen_t len = 42; return len; ! ; return 0; } ! EOF ! if { (eval echo configure:1816: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then ! rm -rf conftest* ac_cv_type_socklen_t=YES else ! echo "configure: failed program was:" >&5 ! cat conftest.$ac_ext >&5 ! rm -rf conftest* ! ac_cv_type_socklen_t=NO ! fi ! rm -f conftest* fi ! echo "$ac_t""$ac_cv_type_socklen_t" 1>&6 if test $ac_cv_type_socklen_t != yes; then ! cat >> confdefs.h <<\EOF #define socklen_t int ! EOF fi --- 3809,3885 ---- INSTALLRELATIVE=YES else INSTALLRELATIVE=NO ! fi; # Check whether --enable-use-rpath or --disable-use-rpath was given. if test "${enable_use_rpath+set}" = set; then enableval="$enable_use_rpath" USERPATH=YES else USERPATH=NO ! fi; # Check whether --enable-install-subdir or --disable-install-subdir was given. if test "${enable_install_subdir+set}" = set; then enableval="$enable_install_subdir" INSTALLSUBDIR=YES else INSTALLSUBDIR=NO ! fi; # AC_TRY_RUN(int access(); int main() { return access("/bin/bash", 1); },BIN_BASH=1,BIN_BASH=0,BIN_BASH=1) + + echo "$as_me:$LINENO: checking for socklen_t" >&5 + echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6 + if test "${ac_cv_type_socklen_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else ! cat >conftest.$ac_ext <<_ACEOF ! #line $LINENO "configure" ! /* confdefs.h. */ ! _ACEOF ! cat confdefs.h >>conftest.$ac_ext ! cat >>conftest.$ac_ext <<_ACEOF ! /* end confdefs.h. */ #include <sys/types.h> #include <sys/socket.h> ! int ! main () ! { socklen_t len = 42; return len; ! ; ! return 0; ! } ! _ACEOF ! rm -f conftest.$ac_objext ! if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ! (eval $ac_compile) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); } && ! { ac_try='test -s conftest.$ac_objext' ! { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 ! (eval $ac_try) 2>&5 ! ac_status=$? ! echo "$as_me:$LINENO: \$? = $ac_status" >&5 ! (exit $ac_status); }; }; then ac_cv_type_socklen_t=YES else ! echo "$as_me: failed program was:" >&5 ! sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_socklen_t=NO fi + rm -f conftest.$ac_objext conftest.$ac_ext ! fi ! echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5 ! echo "${ECHO_T}$ac_cv_type_socklen_t" >&6 if test $ac_cv_type_socklen_t != yes; then ! cat >>confdefs.h <<\_ACEOF #define socklen_t int ! _ACEOF fi *************** *** 1842,1849 **** - #AC_SUBST(BUILD_TREE) --- 3892,3899 ---- + #AC_SUBST(BUILD_TREE) *************** *** 1861,1866 **** --- 3911,3920 ---- + + + + #AC_SUBST(no_x) *************** *** 1870,2163 **** #AC_SUBST(BIN_BASH) ! #output to config-$host_fragd PWD=`pwd`; export PWD ! trap '' 1 2 15 ! cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure ! # scripts and configure runs. It is not useful on other systems. ! # If it contains results you don't want to keep, you may remove or edit it. # ! # By default, configure uses ./config.cache as the cache file, ! # creating it if it does not exist already. You can give configure ! # the --cache-file=FILE option to use a different cache file; that is ! # what configure does when it calls configure scripts in ! # subdirectories, so they share the cache. ! # Giving --cache-file=/dev/null disables caching, for debugging configure. ! # config.status only pays attention to the cache file if you give it the ! # --recheck option to rerun configure. # ! EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ! (set) 2>&1 | ! case `(ac_space=' '; set | grep ac_space) 2>&1` in ! *ac_space=\ *) ! # `set' does not quote correctly, so add quotes (double-quote substitution ! # turns \\\\ into \\, and sed turns \\ into \). ! sed -n \ ! -e "s/'/'\\\\''/g" \ ! -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ! ;; ! *) ! # `set' quotes correctly as required by POSIX, so do not add quotes. ! sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ! ;; ! esac >> confcache ! if cmp -s $cache_file confcache; then ! : ! else if test -w $cache_file; then ! echo "updating cache $cache_file" ! cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache - trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ! # Any assignment to VPATH causes Sun make to only execute ! # the first set of double-colon rules, so remove it if not needed. ! # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ! ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi - trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. ! cat > conftest.defs <<\EOF ! s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g ! s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g ! s%\[%\\&%g ! s%\]%\\&%g ! s%\$%$$%g ! EOF ! DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` ! rm -f conftest.defs ! # Without the "./", some shells look in PATH for config.status. ! : ${CONFIG_STATUS=./config.status} ! echo creating $CONFIG_STATUS ! rm -f $CONFIG_STATUS ! cat > $CONFIG_STATUS <<EOF ! #! /bin/sh ! # Generated automatically by configure. # Run this file to recreate the current configuration. - # This directory was configured as follows, - # on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - # - # $0 $ac_configure_args - # # Compiler output produced by configure, useful for debugging ! # configure, is in ./config.log if it exists. ! ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" ! for ac_option do ! case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ! echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" ! exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; ! -version | --version | --versio | --versi | --vers | --ver | --ve | --v) ! echo "$CONFIG_STATUS generated by autoconf version 2.13" ! exit 0 ;; ! -help | --help | --hel | --he | --h) ! echo "\$ac_cs_usage"; exit 0 ;; ! *) echo "\$ac_cs_usage"; exit 1 ;; esac done ! ac_given_srcdir=$srcdir ! trap 'rm -fr `echo "config/config-$host_fragd:config/config.defs.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 ! EOF ! cat >> $CONFIG_STATUS <<EOF ! ! # Protect against being on the right side of a sed subst in config.status. ! sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; ! s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF ! $ac_vpsub ! $extrasub ! s%@SHELL@%$SHELL%g ! s%@CFLAGS@%$CFLAGS%g ! s%@CPPFLAGS@%$CPPFLAGS%g ! s%@CXXFLAGS@%$CXXFLAGS%g ! s%@FFLAGS@%$FFLAGS%g ! s%@DEFS@%$DEFS%g ! s%@LDFLAGS@%$LDFLAGS%g ! s%@LIBS@%$LIBS%g ! s%@exec_prefix@%$exec_prefix%g ! s%@prefix@%$prefix%g ! s%@program_transform_name@%$program_transform_name%g ! s%@bindir@%$bindir%g ! s%@sbindir@%$sbindir%g ! s%@libexecdir@%$libexecdir%g ! s%@datadir@%$datadir%g ! s%@sysconfdir@%$sysconfdir%g ! s%@sharedstatedir@%$sharedstatedir%g ! s%@localstatedir@%$localstatedir%g ! s%@libdir@%$libdir%g ! s%@includedir@%$includedir%g ! s%@oldincludedir@%$oldincludedir%g ! s%@infodir@%$infodir%g ! s%@mandir@%$mandir%g ! s%@host@%$host%g ! s%@host_alias@%$host_alias%g ! s%@host_cpu@%$host_cpu%g ! s%@host_vendor@%$host_vendor%g ! s%@host_os@%$host_os%g ! s%@CXX@%$CXX%g ! s%@CC@%$CC%g ! s%@CXXCPP@%$CXXCPP%g ! s%@RANLIB@%$RANLIB%g ! s%@CPP@%$CPP%g ! s%@CXX_INCLUDE_DIR@%$CXX_INCLUDE_DIR%g ! s%@LIBSTDCPLUSPLUS2@%$LIBSTDCPLUSPLUS2%g ! s%@LIBSTDCPLUSPLUS3@%$LIBSTDCPLUSPLUS3%g ! s%@x_includes@%$x_includes%g ! s%@x_libraries@%$x_libraries%g ! s%@ACE@%$ACE%g ! s%@ACE_LIBS@%$ACE_LIBS%g ! s%@ACE_ENABLED@%$ACE_ENABLED%g ! s%@CLIPPOLY@%$CLIPPOLY%g ! s%@CLIPPOLY_LIBS@%$CLIPPOLY_LIBS%g ! s%@CLIPPOLY_ENABLED@%$CLIPPOLY_ENABLED%g ! s%@FRESCOLIBS@%$FRESCOLIBS%g ! s%@FRESCOINCS@%$FRESCOINCS%g ! s%@FRESCO_ENABLED@%$FRESCO_ENABLED%g ! s%@IUE@%$IUE%g ! s%@IUELIBS@%$IUELIBS%g ! s%@IUEINCS@%$IUEINCS%g ! s%@IUE_ENABLED@%$IUE_ENABLED%g ! s%@IV@%$IV%g ! s%@IV_LIBS@%$IV_LIBS%g ! s%@NO_BOOL@%$NO_BOOL%g ! s%@PWD@%$PWD%g ! s%@INSTALLRELATIVE@%$INSTALLRELATIVE%g ! s%@USERPATH@%$USERPATH%g ! s%@INSTALLSUBDIR@%$INSTALLSUBDIR%g ! s%@ac_cv_type_socklen_t@%$ac_cv_type_socklen_t%g CEOF - EOF ! cat >> $CONFIG_STATUS <<\EOF ! # Split the substitutions into bite-sized pieces for seds with ! # small command number limits, like on Digital OSF/1 and HP-UX. ! ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ! ac_file=1 # Number of current file. ! ac_beg=1 # First line for current file. ! ac_end=$ac_max_sed_cmds # Line after last line for current file. ! ac_more_lines=: ! ac_sed_cmds="" ! while $ac_more_lines; do ! if test $ac_beg -gt 1; then ! sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file ! else ! sed "${ac_end}q" conftest.subs > conftest.s$ac_file ! fi ! if test ! -s conftest.s$ac_file; then ! ac_more_lines=false ! rm -f conftest.s$ac_file ! else ! if test -z "$ac_sed_cmds"; then ! ac_sed_cmds="sed -f conftest.s$ac_file" else ! ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ! ac_file=`expr $ac_file + 1` ! ac_beg=$ac_end ! ac_end=`expr $ac_end + $ac_max_sed_cmds` fi ! done ! if test -z "$ac_sed_cmds"; then ! ac_sed_cmds=cat ! fi ! EOF ! cat >> $CONFIG_STATUS <<EOF ! ! CONFIG_FILES=\${CONFIG_FILES-"config/config-$host_fragd:config/ config.defs.in"} ! EOF ! cat >> $CONFIG_STATUS <<\EOF ! for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ! case "$ac_file" in ! *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ! ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; ! *) ac_file_in="${ac_file}.in" ;; esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. ! # Remove last slash and all that follows it. Not all systems have dirname. ! ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` ! if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then ! # The file is in a subdirectory. ! test ! -d "$ac_dir" && mkdir "$ac_dir" ! ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" ! # A "../" for each directory in $ac_dir_suffix. ! ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` ! else ! ac_dir_suffix= ac_dots= ! fi ! ! case "$ac_given_srcdir" in ! .) srcdir=. ! if test -z "$ac_dots"; then top_srcdir=. ! else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; ! /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. ! srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" ! top_srcdir="$ac_dots$ac_given_srcdir" ;; ! esac ! echo creating "$ac_file" ! rm -f "$ac_file" ! configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." ! case "$ac_file" in ! *Makefile*) ac_comsub="1i\\ ! # $configure_input" ;; ! *) ac_comsub= ;; ! esac ! ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` ! sed -e "$ac_comsub ! s%@configure_input@%$configure_input%g ! s%@srcdir@%$srcdir%g ! s%@top_srcdir@%$top_srcdir%g ! " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file ! fi; done ! rm -f conftest.s* ! EOF ! cat >> $CONFIG_STATUS <<EOF ! EOF ! cat >> $CONFIG_STATUS <<\EOF ! exit 0 ! EOF chmod +x $CONFIG_STATUS ! rm -fr confdefs* $ac_clean_files ! test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 echo --- 3924,4848 ---- #AC_SUBST(BIN_BASH) ! #output to config-$host_fragd PWD=`pwd`; export PWD ! ac_config_files="$ac_config_files config/config-$host_fragd:config/config.defs.in" ! cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure ! # scripts and configure runs, see configure's option --config-cache. ! # It is not useful on other systems. If it contains results you don't ! # want to keep, you may remove or edit it. # ! # config.status only pays attention to the cache file if you give it ! # the --recheck option to rerun configure. # ! # `ac_cv_env_foo' variables (set or unset) will be overridden when ! # loading this file, other *unset* `ac_cv_foo' will be assigned the ! # following values. ! ! _ACEOF ! # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ! { ! (set) 2>&1 | ! case `(ac_space=' '; set | grep ac_space) 2>&1` in ! *ac_space=\ *) ! # `set' does not quote correctly, so add quotes (double-quote ! # substitution turns \\\\ into \\, and sed turns \\ into \). ! sed -n \ ! "s/'/'\\\\''/g; ! s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ! ;; ! *) ! # `set' quotes correctly as required by POSIX, so do not add quotes. ! sed -n \ ! "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ! ;; ! esac; ! } | ! sed ' ! t clear ! : clear ! s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ! t end ! /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ! : end' >>confcache ! if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then ! test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ! cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ! # VPATH may cause trouble with some makes, so we remove $(srcdir), ! # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ! # trailing colons and then remove the whole line if VPATH becomes empty ! # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ! ac_vpsub='/^[ ]*VPATH[ ]*=/{ ! s/:*\$(srcdir):*/:/; ! s/:*\${srcdir}:*/:/; ! s/:*@srcdir@:*/:/; ! s/^\([^=]*=[ ]*\):*/\1/; ! s/:*$//; ! s/^[^=]*=[ ]*$//; ! }' fi # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. ! # ! # If the first sed substitution is executed (which looks for macros that ! # take arguments), then we branch to the quote section. Otherwise, ! # look for a macro that doesn't take arguments. ! cat >confdef2opt.sed <<\_ACEOF ! t clear ! : clear ! s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g ! t quote ! s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g ! t quote ! d ! : quote ! s,[ `~#$^&*(){}\\|;'"<>?],\\&,g ! s,\[,\\&,g ! s,\],\\&,g ! s,\$,$$,g ! p ! _ACEOF ! # We use echo to avoid assuming a particular line-breaking character. ! # The extra dot is to prevent the shell from consuming trailing ! # line-breaks from the sub-command output. A line-break within ! # single-quotes doesn't work because, if this script is created in a ! # platform that uses two characters for line-breaks (e.g., DOS), tr ! # would break. ! ac_LF_and_DOT=`echo; echo .` ! DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` ! rm -f confdef2opt.sed ! ! ! ac_libobjs= ! ac_ltlibobjs= ! for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue ! # 1. Remove the extension, and $U if already installed. ! ac_i=`echo "$ac_i" | ! sed 's/\$U\././;s/\.o$//;s/\.obj$//'` ! # 2. Add them. ! ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" ! ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ! done ! LIBOBJS=$ac_libobjs + LTLIBOBJS=$ac_ltlibobjs ! ! : ${CONFIG_STATUS=./config.status} ! ac_clean_files_save=$ac_clean_files ! ac_clean_files="$ac_clean_files $CONFIG_STATUS" ! { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ! echo "$as_me: creating $CONFIG_STATUS" >&6;} ! cat >$CONFIG_STATUS <<_ACEOF ! #! $SHELL ! # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging ! # configure, is in config.log if it exists. ! debug=false ! ac_cs_recheck=false ! ac_cs_silent=false ! SHELL=\${CONFIG_SHELL-$SHELL} ! _ACEOF ! ! cat >>$CONFIG_STATUS <<\_ACEOF ! ## --------------------- ## ! ## M4sh Initialization. ## ! ## --------------------- ## ! ! # Be Bourne compatible ! if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ! emulate sh ! NULLCMD=: ! # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ! # is contrary to our usage. Disable this feature. ! alias -g '${1+"$@"}'='"$@"' ! elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then ! set -o posix ! fi ! ! # Support unset when possible. ! if (FOO=FOO; unset FOO) >/dev/null 2>&1; then ! as_unset=unset ! else ! as_unset=false ! fi ! ! ! # Work around bugs in pre-3.0 UWIN ksh. ! $as_unset ENV MAIL MAILPATH ! PS1='$ ' ! PS2='> ' ! PS4='+ ' ! ! # NLS nuisances. ! for as_var in \ ! LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ! LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ! LC_TELEPHONE LC_TIME ! do ! if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then ! eval $as_var=C; export $as_var ! else ! $as_unset $as_var ! fi ! done ! ! # Required to use basename. ! if expr a : '\(a\)' >/dev/null 2>&1; then ! as_expr=expr ! else ! as_expr=false ! fi ! ! if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ! as_basename=basename ! else ! as_basename=false ! fi ! ! ! # Name of the executable. ! as_me=`$as_basename "$0" || ! $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ! X"$0" : 'X\(//\)$' \| \ ! X"$0" : 'X\(/\)$' \| \ ! . : '\(.\)' 2>/dev/null || ! echo X/"$0" | ! sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } ! /^X\/\(\/\/\)$/{ s//\1/; q; } ! /^X\/\(\/\).*/{ s//\1/; q; } ! s/.*/./; q'` ! ! ! # PATH needs CR, and LINENO needs CR and PATH. ! # Avoid depending upon Character Ranges. ! as_cr_letters='abcdefghijklmnopqrstuvwxyz' ! as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ! as_cr_Letters=$as_cr_letters$as_cr_LETTERS ! as_cr_digits='0123456789' ! as_cr_alnum=$as_cr_Letters$as_cr_digits ! ! # The user is always right. ! if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conf$$.sh ! echo "exit 0" >>conf$$.sh ! chmod +x conf$$.sh ! if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ! PATH_SEPARATOR=';' ! else ! PATH_SEPARATOR=: ! fi ! rm -f conf$$.sh ! fi ! ! ! as_lineno_1=$LINENO ! as_lineno_2=$LINENO ! as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` ! test "x$as_lineno_1" != "x$as_lineno_2" && ! test "x$as_lineno_3" = "x$as_lineno_2" || { ! # Find who we are. Look in the path if we contain no path at all ! # relative or not. ! case $0 in ! *[\\/]* ) as_myself=$0 ;; ! *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ! done ! ! ;; ! esac ! # We did not find ourselves, most probably we were run as `sh COMMAND' ! # in which case we are not to be found in the path. ! if test "x$as_myself" = x; then ! as_myself=$0 ! fi ! if test ! -f "$as_myself"; then ! { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 ! echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} ! { (exit 1); exit 1; }; } ! fi ! case $CONFIG_SHELL in ! '') ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for as_base in sh bash ksh sh5; do ! case $as_dir in ! /*) ! if ("$as_dir/$as_base" -c ' ! as_lineno_1=$LINENO ! as_lineno_2=$LINENO ! as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` ! test "x$as_lineno_1" != "x$as_lineno_2" && ! test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then ! $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } ! $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } ! CONFIG_SHELL=$as_dir/$as_base ! export CONFIG_SHELL ! exec "$CONFIG_SHELL" "$0" ${1+"$@"} ! fi;; ! esac ! done ! done ! ;; ! esac ! ! # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ! # uniformly replaced by the line number. The first 'sed' inserts a ! # line-number line before each line; the second 'sed' does the real ! # work. The second script uses 'N' to pair each line-number line ! # with the numbered line, and appends trailing '-' during ! # substitution so that $LINENO is not a special case at line end. ! # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ! # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) ! sed '=' <$as_myself | ! sed ' ! N ! s,$,-, ! : loop ! s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ! t loop ! s,-$,, ! s,^['$as_cr_digits']*\n,, ! ' >$as_me.lineno && ! chmod +x $as_me.lineno || ! { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 ! echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ! { (exit 1); exit 1; }; } ! ! # Don't try to exec as it changes $[0], causing all sort of problems ! # (the dirname of $[0] is not the place where we might find the ! # original and so on. Autoconf is especially sensible to this). ! . ./$as_me.lineno ! # Exit status is that of the last command. ! exit ! } ! ! ! case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in ! *c*,-n*) ECHO_N= ECHO_C=' ! ' ECHO_T=' ' ;; ! *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; ! *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ! esac ! ! if expr a : '\(a\)' >/dev/null 2>&1; then ! as_expr=expr ! else ! as_expr=false ! fi ! ! rm -f conf$$ conf$$.exe conf$$.file ! echo >conf$$.file ! if ln -s conf$$.file conf$$ 2>/dev/null; then ! # We could just check for DJGPP; but this test a) works b) is more generic ! # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). ! if test -f conf$$.exe; then ! # Don't use ln at all; we don't have any links ! as_ln_s='cp -p' ! else ! as_ln_s='ln -s' ! fi ! elif ln conf$$.file conf$$ 2>/dev/null; then ! as_ln_s=ln ! else ! as_ln_s='cp -p' ! fi ! rm -f conf$$ conf$$.exe conf$$.file ! ! if mkdir -p . 2>/dev/null; then ! as_mkdir_p=: ! else ! as_mkdir_p=false ! fi ! ! as_executable_p="test -f" ! ! # Sed expression to map a string onto a valid CPP name. ! as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" ! ! # Sed expression to map a string onto a valid variable name. ! as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" ! ! ! # IFS ! # We need space, tab and new line, in precisely that order. ! as_nl=' ! ' ! IFS=" $as_nl" ! ! # CDPATH. ! $as_unset CDPATH ! ! exec 6>&1 ! ! # Open the log real soon, to keep \$[0] and so on meaningful, and to ! # report actual input values of CONFIG_FILES etc. instead of their ! # values after options handling. Logging --version etc. is OK. ! exec 5>>config.log ! { ! echo ! sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ! ## Running $as_me. ## ! _ASBOX ! } >&5 ! cat >&5 <<_CSEOF ! ! This file was extended by $as_me, which was ! generated by GNU Autoconf 2.57. Invocation command line was ! ! CONFIG_FILES = $CONFIG_FILES ! CONFIG_HEADERS = $CONFIG_HEADERS ! CONFIG_LINKS = $CONFIG_LINKS ! CONFIG_COMMANDS = $CONFIG_COMMANDS ! $ $0 $@ ! ! _CSEOF ! echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 ! echo >&5 ! _ACEOF ! ! # Files that config.status was made for. ! if test -n "$ac_config_files"; then ! echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS ! fi ! ! if test -n "$ac_config_headers"; then ! echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS ! fi ! ! if test -n "$ac_config_links"; then ! echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS ! fi ! ! if test -n "$ac_config_commands"; then ! echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS ! fi ! ! cat >>$CONFIG_STATUS <<\_ACEOF ! ! ac_cs_usage="\ ! \`$as_me' instantiates files from templates according to the ! current configuration. ! ! Usage: $0 [OPTIONS] [FILE]... ! ! -h, --help print this help, then exit ! -V, --version print version number, then exit ! -q, --quiet do not print progress messages ! -d, --debug don't remove temporary files ! --recheck update $as_me by reconfiguring in the same conditions ! --file=FILE[:TEMPLATE] ! instantiate the configuration file FILE ! ! Configuration files: ! $config_files ! ! Report bugs to <[email protected]>." ! _ACEOF ! ! cat >>$CONFIG_STATUS <<_ACEOF ! ac_cs_version="\\ ! config.status ! configured by $0, generated by GNU Autoconf 2.57, ! with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ! ! Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 ! Free Software Foundation, Inc. ! This config.status script is free software; the Free Software Foundation ! gives unlimited permission to copy, distribute and modify it." ! srcdir=$srcdir ! _ACEOF ! ! cat >>$CONFIG_STATUS <<\_ACEOF ! # If no file are specified by the user, then we need to provide default ! # value. By we need to know if files were specified by the user. ! ac_need_defaults=: ! while test $# != 0 do ! case $1 in ! --*=*) ! ac_option=`expr "x$1" : 'x\([^=]*\)='` ! ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ! ac_shift=: ! ;; ! -*) ! ac_option=$1 ! ac_optarg=$2 ! ac_shift=shift ! ;; ! *) # This is not an option, so the user has probably given explicit ! # arguments. ! ac_option=$1 ! ac_need_defaults=false;; ! esac ! ! case $ac_option in ! # Handling of the options. ! _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ! ac_cs_recheck=: ;; ! --version | --vers* | -V ) ! echo "$ac_cs_version"; exit 0 ;; ! --he | --h) ! # Conflict between --help and --header ! { { echo "$as_me:$LINENO: error: ambiguous option: $1 ! Try \`$0 --help' for more information." >&5 ! echo "$as_me: error: ambiguous option: $1 ! Try \`$0 --help' for more information." >&2;} ! { (exit 1); exit 1; }; };; ! --help | --hel | -h ) ! echo "$ac_cs_usage"; exit 0 ;; ! --debug | --d* | -d ) ! debug=: ;; ! --file | --fil | --fi | --f ) ! $ac_shift ! CONFIG_FILES="$CONFIG_FILES $ac_optarg" ! ac_need_defaults=false;; ! --header | --heade | --head | --hea ) ! $ac_shift ! CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ! ac_need_defaults=false;; ! -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ! | -silent | --silent | --silen | --sile | --sil | --si | --s) ! ac_cs_silent=: ;; ! ! # This is an error. ! -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 ! Try \`$0 --help' for more information." >&5 ! echo "$as_me: error: unrecognized option: $1 ! Try \`$0 --help' for more information." >&2;} ! { (exit 1); exit 1; }; } ;; ! ! *) ac_config_targets="$ac_config_targets $1" ;; ! esac + shift done ! ac_configure_extra_args= ! if $ac_cs_silent; then ! exec 6>/dev/null ! ac_configure_extra_args="$ac_configure_extra_args --silent" ! fi ! ! _ACEOF ! cat >>$CONFIG_STATUS <<_ACEOF ! if \$ac_cs_recheck; then ! echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ! exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ! fi ! ! _ACEOF ! ! ! ! ! ! cat >>$CONFIG_STATUS <<\_ACEOF ! for ac_config_target in $ac_config_targets ! do ! case "$ac_config_target" in ! # Handling of arguments. ! "config/config-$host_fragd" ) CONFIG_FILES="$CONFIG_FILES config/config-$host_fragd:config/config.defs.in" ;; ! *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ! echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ! { (exit 1); exit 1; }; };; ! esac ! done ! ! # If the user did not use the arguments to specify the items to instantiate, ! # then the envvar interface is used. Set only those that are not. ! # We use the long form for the default assignment because of an extremely ! # bizarre bug on SunOS 4.1.3. ! if $ac_need_defaults; then ! test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ! fi ! ! # Have a temporary directory for convenience. Make it in the build tree ! # simply because there is no reason to put it here, and in addition, ! # creating and moving files from /tmp can sometimes cause problems. ! # Create a temporary directory, and hook for its removal unless debugging. ! $debug || ! { ! trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ! trap '{ (exit 1); exit 1; }' 1 2 13 15 ! } ! ! # Create a (secure) tmp directory for tmp files. ! ! { ! tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ! test -n "$tmp" && test -d "$tmp" ! } || ! { ! tmp=./confstat$$-$RANDOM ! (umask 077 && mkdir $tmp) ! } || ! { ! echo "$me: cannot create a temporary directory in ." >&2 ! { (exit 1); exit 1; } ! } + _ACEOF + + cat >>$CONFIG_STATUS <<_ACEOF + + # + # CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h + if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF + s,@SHELL@,$SHELL,;t t + s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t + s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t + s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t + s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t + s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t + s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t + s,@exec_prefix@,$exec_prefix,;t t + s,@prefix@,$prefix,;t t + s,@program_transform_name@,$program_transform_name,;t t + s,@bindir@,$bindir,;t t + s,@sbindir@,$sbindir,;t t + s,@libexecdir@,$libexecdir,;t t + s,@datadir@,$datadir,;t t + s,@sysconfdir@,$sysconfdir,;t t + s,@sharedstatedir@,$sharedstatedir,;t t + s,@localstatedir@,$localstatedir,;t t + s,@libdir@,$libdir,;t t + s,@includedir@,$includedir,;t t + s,@oldincludedir@,$oldincludedir,;t t + s,@infodir@,$infodir,;t t + s,@mandir@,$mandir,;t t + s,@build_alias@,$build_alias,;t t + s,@host_alias@,$host_alias,;t t + s,@target_alias@,$target_alias,;t t + s,@DEFS@,$DEFS,;t t + s,@ECHO_C@,$ECHO_C,;t t + s,@ECHO_N@,$ECHO_N,;t t + s,@ECHO_T@,$ECHO_T,;t t + s,@LIBS@,$LIBS,;t t + s,@build@,$build,;t t + s,@build_cpu@,$build_cpu,;t t + s,@build_vendor@,$build_vendor,;t t + s,@build_os@,$build_os,;t t + s,@host@,$host,;t t + s,@host_cpu@,$host_cpu,;t t + s,@host_vendor@,$host_vendor,;t t + s,@host_os@,$host_os,;t t + s,@CXX@,$CXX,;t t + s,@CXXFLAGS@,$CXXFLAGS,;t t + s,@LDFLAGS@,$LDFLAGS,;t t + s,@CPPFLAGS@,$CPPFLAGS,;t t + s,@ac_ct_CXX@,$ac_ct_CXX,;t t + s,@EXEEXT@,$EXEEXT,;t t + s,@OBJEXT@,$OBJEXT,;t t + s,@CC@,$CC,;t t + s,@CFLAGS@,$CFLAGS,;t t + s,@ac_ct_CC@,$ac_ct_CC,;t t + s,@CXXCPP@,$CXXCPP,;t t + s,@RANLIB@,$RANLIB,;t t + s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t + s,@CPP@,$CPP,;t t + s,@CXX_INCLUDE_DIR@,$CXX_INCLUDE_DIR,;t t + s,@LIBSTDCPLUSPLUS2@,$LIBSTDCPLUSPLUS2,;t t + s,@LIBSTDCPLUSPLUS3@,$LIBSTDCPLUSPLUS3,;t t + s,@x_includes@,$x_includes,;t t + s,@x_libraries@,$x_libraries,;t t + s,@ACE@,$ACE,;t t + s,@ACE_LIBS@,$ACE_LIBS,;t t + s,@ACE_ENABLED@,$ACE_ENABLED,;t t + s,@CLIPPOLY@,$CLIPPOLY,;t t + s,@CLIPPOLY_LIBS@,$CLIPPOLY_LIBS,;t t + s,@CLIPPOLY_ENABLED@,$CLIPPOLY_ENABLED,;t t + s,@FRESCOLIBS@,$FRESCOLIBS,;t t + s,@FRESCOINCS@,$FRESCOINCS,;t t + s,@FRESCO_ENABLED@,$FRESCO_ENABLED,;t t + s,@IUE@,$IUE,;t t + s,@IUELIBS@,$IUELIBS,;t t + s,@IUEINCS@,$IUEINCS,;t t + s,@IUE_ENABLED@,$IUE_ENABLED,;t t + s,@QT@,$QT,;t t + s,@QTLIBS@,$QTLIBS,;t t + s,@QTINCS@,$QTINCS,;t t + s,@QT_ENABLED@,$QT_ENABLED,;t t + s,@IV@,$IV,;t t + s,@IV_LIBS@,$IV_LIBS,;t t + s,@NO_BOOL@,$NO_BOOL,;t t + s,@PWD@,$PWD,;t t + s,@INSTALLRELATIVE@,$INSTALLRELATIVE,;t t + s,@USERPATH@,$USERPATH,;t t + s,@INSTALLSUBDIR@,$INSTALLSUBDIR,;t t + s,@ac_cv_type_socklen_t@,$ac_cv_type_socklen_t,;t t + s,@LIBOBJS@,$LIBOBJS,;t t + s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF ! _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF ! # Split the substitutions into bite-sized pieces for seds with ! # small command number limits, like on Digital OSF/1 and HP-UX. ! ac_max_sed_lines=48 ! ac_sed_frag=1 # Number of current file. ! ac_beg=1 # First line for current file. ! ac_end=$ac_max_sed_lines # Line after last line for current file. ! ac_more_lines=: ! ac_sed_cmds= ! while $ac_more_lines; do ! if test $ac_beg -gt 1; then ! sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag ! else ! sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag ! fi ! if test ! -s $tmp/subs.frag; then ! ac_more_lines=false else ! # The purpose of the label and of the branching condition is to ! # speed up the sed processing (if there are no `@' at all, there ! # is no need to browse any of the substitutions). ! # These are the two extra sed commands mentioned above. ! (echo ':t ! /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed ! if test -z "$ac_sed_cmds"; then ! ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" ! else ! ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" ! fi ! ac_sed_frag=`expr $ac_sed_frag + 1` ! ac_beg=$ac_end ! ac_end=`expr $ac_end + $ac_max_sed_lines` fi ! done ! if test -z "$ac_sed_cmds"; then ! ac_sed_cmds=cat fi ! fi # test -n "$CONFIG_FILES" ! _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF ! for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ! case $ac_file in ! - | *:- | *:-:* ) # input from stdin ! cat >$tmp/stdin ! ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ! ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; ! *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ! ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; ! * ) ac_file_in=$ac_file.in ;; esac ! # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ! ac_dir=`(dirname "$ac_file") 2>/dev/null || ! $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ! X"$ac_file" : 'X\(//\)[^/]' \| \ ! X"$ac_file" : 'X\(//\)$' \| \ ! X"$ac_file" : 'X\(/\)' \| \ ! . : '\(.\)' 2>/dev/null || ! echo X"$ac_file" | ! sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ! /^X\(\/\/\)[^/].*/{ s//\1/; q; } ! /^X\(\/\/\)$/{ s//\1/; q; } ! /^X\(\/\).*/{ s//\1/; q; } ! s/.*/./; q'` ! { if $as_mkdir_p; then ! mkdir -p "$ac_dir" ! else ! as_dir="$ac_dir" ! as_dirs= ! while test ! -d "$as_dir"; do ! as_dirs="$as_dir $as_dirs" ! as_dir=`(dirname "$as_dir") 2>/dev/null || ! $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ! X"$as_dir" : 'X\(//\)[^/]' \| \ ! X"$as_dir" : 'X\(//\)$' \| \ ! X"$as_dir" : 'X\(/\)' \| \ ! . : '\(.\)' 2>/dev/null || ! echo X"$as_dir" | ! sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } ! /^X\(\/\/\)[^/].*/{ s//\1/; q; } ! /^X\(\/\/\)$/{ s//\1/; q; } ! /^X\(\/\).*/{ s//\1/; q; } ! s/.*/./; q'` ! done ! test ! -n "$as_dirs" || mkdir $as_dirs ! fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 ! echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ! { (exit 1); exit 1; }; }; } ! ! ac_builddir=. ! ! if test "$ac_dir" != .; then ! ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ! # A "../" for each directory in $ac_dir_suffix. ! ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` ! else ! ac_dir_suffix= ac_top_builddir= ! fi ! ! case $srcdir in ! .) # No --srcdir option. We are building in place. ! ac_srcdir=. ! if test -z "$ac_top_builddir"; then ! ac_top_srcdir=. ! else ! ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` ! fi ;; ! [\\/]* | ?:[\\/]* ) # Absolute path. ! ac_srcdir=$srcdir$ac_dir_suffix; ! ac_top_srcdir=$srcdir ;; *) # Relative path. ! ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ! ac_top_srcdir=$ac_top_builddir$srcdir ;; ! esac ! # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be ! # absolute. ! ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ! ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ! ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ! ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` ! ! if test x"$ac_file" != x-; then ! { echo "$as_me:$LINENO: creating $ac_file" >&5 ! echo "$as_me: creating $ac_file" >&6;} ! rm -f "$ac_file" ! fi ! # Let's still pretend it is `configure' which instantiates (i.e., don't ! # use $as_me), people would be surprised to read: ! # /* config.h. Generated by config.status. */ ! if test x"$ac_file" = x-; then ! configure_input= ! else ! configure_input="$ac_file. " ! fi ! configure_input=$configure_input"Generated from `echo $ac_file_in | ! sed 's,.*/,,'` by configure." ! # First look for the input files in the build tree, otherwise in the ! # src tree. ! ac_file_inputs=`IFS=: ! for f in $ac_file_in; do ! case $f in ! -) echo $tmp/stdin ;; ! [\\/$]*) ! # Absolute (can't be DOS-style, as IFS=:) ! test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 ! echo "$as_me: error: cannot find input file: $f" >&2;} ! { (exit 1); exit 1; }; } ! echo $f;; ! *) # Relative ! if test -f "$f"; then ! # Build tree ! echo $f ! elif test -f "$srcdir/$f"; then ! # Source tree ! echo $srcdir/$f ! else ! # /dev/null tree ! { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 ! echo "$as_me: error: cannot find input file: $f" >&2;} ! { (exit 1); exit 1; }; } ! fi;; ! esac ! done` || { (exit 1); exit 1; } ! _ACEOF ! cat >>$CONFIG_STATUS <<_ACEOF ! sed "$ac_vpsub ! $extrasub ! _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF ! :t ! /@[a-zA-Z_][a-zA-Z_0-9]*@/!b ! s,@configure_input@,$configure_input,;t t ! s,@srcdir@,$ac_srcdir,;t t ! s,@abs_srcdir@,$ac_abs_srcdir,;t t ! s,@top_srcdir@,$ac_top_srcdir,;t t ! s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t ! s,@builddir@,$ac_builddir,;t t ! s,@abs_builddir@,$ac_abs_builddir,;t t ! s,@top_builddir@,$ac_top_builddir,;t t ! s,@abs_top_builddir@,$ac_abs_top_builddir,;t t ! " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out ! rm -f $tmp/stdin ! if test x"$ac_file" != x-; then ! mv $tmp/out $ac_file ! else ! cat $tmp/out ! rm -f $tmp/out ! fi ! done ! _ACEOF ! cat >>$CONFIG_STATUS <<\_ACEOF ! { (exit 0); exit 0; } ! _ACEOF chmod +x $CONFIG_STATUS ! ac_clean_files=$ac_clean_files_save ! ! ! # configure is writing to config.log, and then calls config.status. ! # config.status does its own redirection, appending to config.log. ! # Unfortunately, on DOS this fails, as config.log is still kept open ! # by configure, so config.status won't be able to write to it; its ! # output is simply discarded. So we exec the FD to /dev/null, ! # effectively closing config.log, so it can be properly (re)opened and ! # appended to by config.status. When coming back to configure, we ! # need to make the FD available again. ! if test "$no_create" != yes; then ! ac_cs_success=: ! ac_config_status_args= ! test "$silent" = yes && ! ac_config_status_args="$ac_config_status_args --quiet" ! exec 5>/dev/null ! $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ! exec 5>>config.log ! # Use ||, not &&, to avoid exiting from the if with $? = 1, which ! # would make configure fail if this is the last instruction. ! $ac_cs_success || { (exit 1); exit 1; } ! fi echo *************** *** 2166,2172 **** echo "establishing symbolic link for src/include/IV-3_1/InterViews" cd src/include/IV-3_1; ln -s ../InterViews; ! cd ../../..; fi if test ! -f src/IV-common/listimpl.c ; then --- 4851,4857 ---- echo "establishing symbolic link for src/include/IV-3_1/InterViews" cd src/include/IV-3_1; ln -s ../InterViews; ! cd ../../..; fi if test ! -f src/IV-common/listimpl.c ; then Index: top_ivtools/configure.in diff -c top_ivtools/configure.in:1.1 top_ivtools/configure.in:1.2 *** top_ivtools/configure.in:1.1 Fri Jan 9 11:42:09 2004 --- ./configure.in Tue Feb 10 11:40:58 2004 *************** *** 213,218 **** --- 213,271 ---- fi + QT_ENABLED=0 + QT="" + QTLIBS="" + AC_ARG_WITH(qt, [ --with-qt=<path> path to QT directory], + QT=$withval + + if test x"$QTLIBS" = x + then + if test -d "$QT"/lib + then + QTLIBS=$QT/lib + else + QTLIBS=$QT/Build/lib + fi + fi + ) + + AC_ARG_WITH(qt-libs,[ --with-qt-libs=<path> path to compiled QT libs], + QTLIBS=$withval ) + + ## Check qt + + if test x"$QT" = x + then + echo "" + echo "No QT path specified." + echo "Use --with-qt=<path> to point to QT installed directory." + else + if test ! -f "$QT"/include/qt.h + then + echo "" + echo "Verify your QT environment and try it again." + echo "(Couldn't find $QT/include/qt.h!)" + + echo "Use --with-qt=<path> to point to QT (or set it in the env)." + echo "<path> points to the installed QT version or to a source tree." + echo "You may also use --with-qt-libs to specify the lib directory." + else + QTINCS="$QT/include" + fi + + if test ! -d "$QTLIBS" + then + echo "QT directory '$QTLIBS' does not exist (or is not readable)." + echo "Use --with-qt-libs to point to it." + fi + echo "Building with QT support" + echo "QT includes = $QTINCS" + echo "QT libs = $QTLIBS" + QT_ENABLED=1 + fi + + # check of the c++ compiler AC_PROG_CXX # check for the c compiler *************** *** 227,233 **** #AC_CXX_BOOL # check for c++ standard headers #AC_CXX_HEADERS ! ICE_CXX_INCLUDE_DIR # check for EGCS or gcc 2.8.x #AC_CXX_EGCS # check for gettimeofday --- 280,286 ---- #AC_CXX_BOOL # check for c++ standard headers #AC_CXX_HEADERS ! #ICE_CXX_INCLUDE_DIR # check for EGCS or gcc 2.8.x #AC_CXX_EGCS # check for gettimeofday *************** *** 320,325 **** --- 373,382 ---- AC_SUBST(IUELIBS) AC_SUBST(IUEINCS) AC_SUBST(IUE_ENABLED) + AC_SUBST(QT) + AC_SUBST(QTLIBS) + AC_SUBST(QTINCS) + AC_SUBST(QT_ENABLED) AC_SUBST(IV) AC_SUBST(IV_LIBS) #AC_SUBST(no_x) *** /dev/null Tue Feb 10 11:41:27 PST 2004 --- patches/ivtools-040210-johnston-007 *************** patches/ivtools-040210-johnston-007 *** 0 **** --- 1 ---- + ivtools-040210-johnston-007 ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn