Problem with GemPC Twin

Hi list,

I have a new GemPC Twin Reader attached to usb. 
My box runs under SuSE 10.1. It is a IBM Thinkpad T43p. 
I installed pcsc-lite-1.3.1 and ccid-1.0.1 from source in 
/usr/local because I got strange errors when I used the 
SuSE packages about not found symbols. 

I start the chipcard2 server as root with:

wolkix:~ # chipcardd2 --pidfile /var/run/chipcardd2.pid -f --loglevel notice --logtype console
5:2006/07/21 08-55-38:chipcardd(10307):chipcardd2.c:  733: Chipcardd v2.1.6.0stable started.
5:2006/07/21 08-55-38:chipcardd(10307):chipcardd2.c:  735: LibUSB supported.
5:2006/07/21 08-55-38:chipcardd(10307):chipcardd2.c:  738: LibSYSFS supported.
5:2006/07/21 08-55-38:chipcardd(10308):chipcardd2.c:  963: Initializing daemon.
5:2006/07/21 08-55-38:chipcardd(10308):chipcardd2.c: 1008: Using configuration file [/etc/chipcard2-server/chipcardd2.conf]
5:2006/07/21 08-55-38:chipcardd(10308):cs_init.c:  427: Autoconfiguration enabled
4:2006/07/21 08-55-38:chipcardd(10308):devicemanager.c:  124: Your configuration does not have a "DeviceManager" group. Please update the file.
5:2006/07/21 08-55-38:chipcardd(10308):usbttyscanner.c:   69: Will use sysfs to scan for ttyUSB devices
5:2006/07/21 08-55-38:chipcardd(10307):chipcardd2.c:  798: Watcher now supervising daemon 10308
4:2006/07/21 08-55-38:chipcardd(10308):servicemanager.c:   85: Your configuration does not have a "ServiceManager" group. Please update the file.
5:2006/07/21 08-55-38:chipcardd(10308):devicemanager.c: 2953: Changes in hardware list
5:2006/07/21 08-55-38:chipcardd(10308):devicemanager.c: 2863: AUTOCONFIG: Created new reader "auto1-ccid_gempc_twin" (UsbRaw/08e6/3437)
3:2006/07/21 08-55-38:chipcardd(10308):devicemanager.c: 2713: No autoport mode
4:2006/07/21 08-55-38:chipcardd(10308):devicemanager.c: 2868: Could not automatically assign port, assuming 1
5:2006/07/21 08-55-43:chipcardd(10308):clr_clientready.c:   93: Client "44c07a6c" started (geldkarte2, Gwen 2.3.0-stable-r0, ChipCard 2.1.6.0stable)
5:2006/07/21 08-55-43:chipcardd(10308):clr_startwait.c:   63: Client 44c07a6c: StartWait [geldkarte2/nobody]
5:2006/07/21 08-55-45:chipcardd(10308):devicemanager.c: 2025: Driver "44c07a6b" (ccid_ifd) is up (Library loaded)
5:2006/07/21 08-55-50:chipcardd(10308):devicemanager.c: 2289: Driver ccid_ifd: Reader error
5:2006/07/21 08-55-50:chipcardd(10308):devicemanager.c: 1371: Reader "auto1-ccid_gempc_twin" is up (Reader up and waiting), info: unit0="icc1"
5:2006/07/21 08-56-17:chipcardd(10308):cs_callbacks.c:   31: One of my connections is down
5:2006/07/21 08-56-17:chipcardd(10308):clientmanager.c:  355: Removing client 44c07a6c [geldkarte2/nobody]
5:2006/07/21 08-56-24:chipcardd(10308):chipcardd2.c:  440: Daemon got an interrupt signal, will go down.
5:2006/07/21 08-56-24:chipcardd(10307):chipcardd2.c:  474: Watcher got a child signal
5:2006/07/21 08-56-24:chipcardd(10307):chipcardd2.c:  444: Watcher got an interrupt signal, will terminate child
5:2006/07/21 08-56-24:chipcardd(10307):chipcardd2.c:  899: Daemon exited normally, exiting, too.

as a normal user I started

sk@wolkix:/home/sk> geldkarte2 --logtype=console --loglevel=info -v -v -v loaded
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/."
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/.."
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/ddv.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/memorycard.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/processorcard.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/starcos-hvb.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/starcos-vr.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/examplecard.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/kvk.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/ecard.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/geldkarte.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/ddv0.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/ddv1.xml"
6:2006/07/21 08-55-43:geldkarte2(10309):cardmgr.c:  114: Checking file "/etc/chipcard2-client/apps/starcos.xml"
5:2006/07/21 08-55-43:geldkarte2(10309):client.c:  896: Using configuration file [/etc/chipcard2-client/chipcardc2.conf]
6:2006/07/21 08-55-43:geldkarte2(10309):client.c:  934: Reading configuration from "/etc/chipcard2-client/chipcardc2.conf"
6:2006/07/21 08-55-43:geldkarte2(10309):client.c:  798: Added server
Connecting to server.
6:2006/07/21 08-55-43:geldkarte2(10309):client.c:  304: Starting to connect
6:2006/07/21 08-55-43:geldkarte2(10309):client.c:  665: Started to connect
6:2006/07/21 08-55-43:geldkarte2(10309):client.c:  346: Connected
Connected.
Waiting for card...

I stopped it by Ctrl-C.

Once I got as well the following on the client side:
6:2006/07/21 08-46-17:geldkarte2(10198):client.c: 1492: Card added
Found a card.
Opening card.
6:2006/07/21 08-46-17:geldkarte2(10198):geldkarte.c:   97: Opening card as Geldkarte
6:2006/07/21 08-46-17:geldkarte2(10198):cardmgr.c:  329: App "ProcessorCard" selected
6:2006/07/21 08-46-17:geldkarte2(10198):geldkarte.c:  142: Opening Geldkarte
6:2006/07/21 08-46-17:geldkarte2(10198):cardmgr.c:  329: App "geldkarte" selected
6:2006/07/21 08-46-17:geldkarte2(10198):geldkarte.c:  164: Selecting MF...
6:2006/07/21 08-46-17:geldkarte2(10198):cardcontext.c:  467: Command: "SelectMF"
3:2006/07/21 08-46-17:geldkarte2(10198):client.c:  224: Error 1: Unknow error code
3:2006/07/21 08-46-17:geldkarte2(10198):client.c: 2087: IPC error 00000001
6:2006/07/21 08-46-17:geldkarte2(10198):card.c:  546: Error in "execCommand(SelectMF)": IPC error.
6:2006/07/21 08-46-17:geldkarte2(10198):geldkarte.c:  167: here
6:2006/07/21 08-46-17:geldkarte2(10198):geldkarte.c:  126: here
ERROR: Error executing command CardOpen (3).


The steps from the very good installation howto at http://www.libchipcard.de 
where successful until including

chipcard-tool check

Could anybody help me please?

Tanks in advance.

Best regards

Stephan

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV