Problem with Kobil Kaan Standard plus

Hi,

yesterday I installed libchipcard2 v1.9.12beta and can't get my
Kobil Kaan Standard Plus card reader working. A cardping with the
Kobil utility works and I can access it with the ol libchipcard.

Below are some details, I hope it's all you need (I didn't run
chipcardd2 at loglevel info but only at notice).

Thanks,
	Carsten

~ # lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0d46:2012
Bus 001 Device 001: ID 0000:0000

~ # uname -a
Linux rincewind 2.6.11.4-20a-default #1 Wed Mar 23 21:52:37 UTC
2005 i686 athlon i386 GNU/Linux

(SuSE Linux 9.3)

/usr/var/log/chipcard2/drivers/kobil_ctapi # chipcard-tool list
Server: 42ea5858
  Readers:
  - auto1-ko_kaan_plus_usb (Kaan Standard Plus (USB), port 0,
keypad, display)/usr/var/log/chipcard2/drivers/kobil_ctapi #
chipcard-tool check Readers:
  - auto1-ko_kaan_plus_usb (Kaan Standard Plus (USB), port 0,
keypad, display): error Event log:
18:25:20 Reader is down
18:25:20 Reader started
18:25:20 Reader error (Invalid port number)

/usr/var/log/chipcard2/drivers/kobil_ctapi # cat driver.log
5:2005/07/29 18-25-20:driver(11673):driver.c:  334: Starting driver
"/usr/lib/chipcard2-server/drivers/ctapi" with lowlevel
"/usr/lib/libct.so" 5:2005/07/29 18-25-20:driver(11673):driver.c:
753: Connected to server 5:2005/07/29
18-25-20:driver(11673):driver.c: 2015: Incoming request
"StartReader" 5:2005/07/29 18-25-20:driver(11673):driver.c: 1276:
Command: Start reader 3:2005/07/29 18-25-20:driver(11673):driver.c:
1393: No DriversReaderId 3:2005/07/29
18-25-20:driver(11673):driverctapi.c:  623: Creating reader...
5:2005/07/29 18-25-20:driver(11673):driverctapi.c:  632: Created
reader with CTN 0 5:2005/07/29 18-25-20:driver(11673):driver.c:
1437: Reader "auto1-ko_kaan_plus_usb" logs to
"/usr/var/log/chipcard2/drivers/kobil_ctapi/auto1-ko_kaan_plus_usb.log"
5:2005/07/29 18-25-51:driver(11673):driver.c: 2015: Incoming
request "StopDriver" 5:2005/07/29 18-25-51:driver(11673):driver.c:
1929: Driver down 5:2005/07/29 18-25-51:driver(11673):main.c:   53:
Stopping driver "/usr/lib/chipcard2-server/drivers/ctapi"

/usr/var/log/chipcard2/drivers/kobil_ctapi # cat
auto1-ko_kaan_plus_usb.log 5:2005/07/29
18-25-20:auto1-ko_kaan_plus_usb(11673):driver.c: 1456: Init reader
auto1-ko_kaan_plus_usb 5:2005/07/29
18-25-20:auto1-ko_kaan_plus_usb(11673):driverctapi.c:  655:
Initializing CTAPI driver with 0, 0 (0000) 3:2005/07/29
18-25-20:auto1-ko_kaan_plus_usb(11673):driverctapi.c:  662: Could
not init reader "auto1-ko_kaan_plus_usb" at port 0 : -1
3:2005/07/29 18-25-20:auto1-ko_kaan_plus_usb(11673):driver.c: 1463:
Could not connect reader auto1-ko_kaan_plus_usb (-1: Invalid port
number)5:2005/07/29
18-25-20:auto1-ko_kaan_plus_usb(11673):driver.c: 1501: Reader start
handled 5:2005/07/29
18-25-51:auto1-ko_kaan_plus_usb(11673):driverctapi.c:  701:
Disconnecting reader auto1-ko_kaan_plus_usb 5:2005/07/29
18-25-51:auto1-ko_kaan_plus_usb(11673):driverctapi.c:  278: Calling
dataFn 5:2005/07/29
18-25-51:auto1-ko_kaan_plus_usb(11673):driverctapi.c:  286:
Returned from dataFn (-1) 3:2005/07/29
18-25-51:auto1-ko_kaan_plus_usb(11673):driverctapi.c:  289: CTAPI
error on "CT_data": -1 3:2005/07/29
18-25-51:auto1-ko_kaan_plus_usb(11673):driverctapi.c:  719: Could
not deinit reader "auto1-ko_kaan_plus_usb" 4:2005/07/29
18-25-51:auto1-ko_kaan_plus_usb(11673):driver.c: 1917: Could not
disconnect reader

~ # chipcardd2 --pidfile /var/run/chipcardd2.pid
-f --loglevel notice --logtype console 5:2005/07/29
18-22-54:chipcardd(11592):chipcardd2.c:  722: Chipcardd
v1.9.12.0beta started. 5:2005/07/29
18-22-54:chipcardd(11592):chipcardd2.c:  724: LibUSB supported.
5:2005/07/29 18-22-54:chipcardd(11592):chipcardd2.c:  727: LibSYSFS
supported. 5:2005/07/29 18-22-54:chipcardd(11593):chipcardd2.c:
952: Initializing daemon. 5:2005/07/29
18-22-54:chipcardd(11592):chipcardd2.c:  787: Nanny now supervising
daemon 11593 5:2005/07/29
18-22-54:chipcardd(11593):usbttymonitor.c:  121: USB: Using proc
file for kernel >=2.6 for ttyUSB support 5:2005/07/29
18-22-54:chipcardd(11593):cardserver.c:  388: USB Autoconfiguration
enabled 5:2005/07/29 18-22-54:chipcardd(11593):cs_usb.c:  382:
AUTOCONFIG: Created new reader "auto1-ko_kaan_plus_usb" (USBTTY:
0d46/2012) 5:2005/07/29 18-24-55:chipcardd(11593):cardserver.c:
842: Client 42ea57e0: ClientReady [(null)/nobody] 5:2005/07/29
18-24-55:chipcardd(11593):cardserver.c:  849: Client "42ea57e0"
started (chipcard-tool, Gwen 1.13.3.0stable, ChipCard 1.9.12.0beta)
5:2005/07/29 18-24-55:chipcardd(11593):cs_request.c: 1566: Client
42ea57e0: SetNotify [chipcard-tool/nobody] 5:2005/07/29
18-24-55:chipcardd(11593):cs_request.c: 1650: Setting notify flags
000000ff 5:2005/07/29 18-24-55:chipcardd(11593):cs_request.c: 1828:
Response sent. 5:2005/07/29
18-24-57:chipcardd(11593):cardserver.c:  195: Client "42ea57e0"
down 5:2005/07/29 18-25-20:chipcardd(11593):cardserver.c:  842:
Client 42ea57e5: ClientReady [(null)/nobody] 5:2005/07/29
18-25-20:chipcardd(11593):cardserver.c:  849: Client "42ea57e5"
started (chipcard-tool, Gwen 1.13.3.0stable, ChipCard 1.9.12.0beta)
5:2005/07/29 18-25-20:chipcardd(11593):cs_request.c: 1566: Client
42ea57e5: SetNotify [chipcard-tool/nobody] 5:2005/07/29
18-25-20:chipcardd(11593):cs_request.c: 1650: Setting notify flags
000000ff 5:2005/07/29 18-25-20:chipcardd(11593):cs_request.c: 1828:
Response sent. 5:2005/07/29
18-25-20:chipcardd(11593):cs_request.c:  790: Client 42ea57e5:
StartWait [chipcard-tool/nobody] 5:2005/07/29
18-25-20:chipcardd(11593):cs_request.c:  819: Starting reader
"auto1-ko_kaan_plus_usb" on account of client 42ea57e5 5:2005/07/29
18-25-20:chipcardd(11593):cs_driver.c: 1353: Driver "42ea57df" is
up (Library loaded) 3:2005/07/29
18-25-20:chipcardd(11593):cs_driver.c:  521: Driver reported error
on startup of reader "auto1-ko_kaan_plus_usb": Invalid port number
3:2005/07/29 18-25-20:gwen(11593):ipc.c:  875: Incoming request
42ea57f0 not found 5:2005/07/29
18-25-22:chipcardd(11593):cardserver.c:  195: Client "42ea57e5"
down 5:2005/07/29 18-25-22:chipcardd(11593):cardserver.c:  277:
Reader "auto1-ko_kaan_plus_usb" in use by client "42ea57e5"
5:2005/07/29 18-25-41:chipcardd(11593):cs_driver.c:  349:
Reenabling reader "auto1-ko_kaan_plus_usb" 5:2005/07/29
18-25-51:chipcardd(11593):cs_driver.c: 1136: Driver "kobil_ctapi"
is too long idle, stopping it 4:2005/07/29
18-25-53:chipcardd(11593):cs_driver.c:  955: Driver terminated
normally



-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click