Problems with chipcardreader scm spr532

Hi

After waiting the settling of the libc++ abi change in debian sid, i tried to 
get my reader running (which is as usefull as a paperwight since gnucash 
dropped the old drivers :( ). 

After updating the firmware (which was really a pain since the german 0180 
number guy was really clueless).  I updated to firmware 5.05 which is now 
also linked from the libchipcard.de site.

My reader is a SCM Micro SPR 532.

The error seems to be that the driver can't connect to the reader for reasons 
unkown to me (look at auto1-ccid_scm_x32.log).

Thanks for your help
S.T.


auto1-ccid_scm_x32.log:
auto1-ccid_scm_x32(32394):driver.c: 1456: Init reader auto1-ccid_scm_x32
auto1-ccid_scm_x32(32394):driverifd.c:  676: IFD error on createChannel 0/0: 
612
auto1-ccid_scm_x32(32394):driverifd.c:  683: Could not connect any slot
auto1-ccid_scm_x32(32394):driver.c: 1463: Could not connect reader 
auto1-ccid_scm_x32 (-2147483646: Could not connect any slot)
auto1-ccid_scm_x32(32394):driver.c: 1501: Reader start handled
auto1-ccid_scm_x32(32394):driver.c: 1316: Restarting reader
auto1-ccid_scm_x32(32394):driverifd.c:  516: IFD: Soft error 612
auto1-ccid_scm_x32(32394):driverifd.c:  715: Error closing channel 0 (612)
auto1-ccid_scm_x32(32394):driverifd.c:  676: IFD error on createChannel 0/0: 
612
auto1-ccid_scm_x32(32394):driverifd.c:  683: Could not connect any slot
auto1-ccid_scm_x32(32394):driverifd.c:  516: IFD: Soft error 612
auto1-ccid_scm_x32(32394):driverifd.c:  715: Error closing channel 0 (612)
auto1-ccid_scm_x32(361):driver.c: 1456: Init reader auto1-ccid_scm_x32
auto1-ccid_scm_x32(361):driverifd.c:  676: IFD error on createChannel 0/0: 612
auto1-ccid_scm_x32(361):driverifd.c:  683: Could not connect any slot
auto1-ccid_scm_x32(361):driver.c: 1463: Could not connect reader 
auto1-ccid_scm_x32 (-2147483646: Could not connect any slot)
auto1-ccid_scm_x32(361):driver.c: 1501: Reader start handled
auto1-ccid_scm_x32(361):driverifd.c:  516: IFD: Soft error 612
auto1-ccid_scm_x32(361):driverifd.c:  715: Error closing channel 0 (612)

My software versions are:
libgwenhywfar17c2  1.18.0-1           OS abstraction layer
libchipcard2-tools 1.9.14.99+1.9.15be tools for libchipcard2
libccid            0.9.3-1            PC/SC driver for USB CCID smart card 
libpcsclite1       1.2.9-beta8-3      Middleware to access a smart card using
libaqbanking-plugi 1.5.99+1.6.0beta-1
libaqbanking0c2    1.5.99+1.6.0beta-1
libaqdtaus0        1.5.99+1.6.0beta-1
libaqgeldkarte0    1.5.99+1.6.0beta-1
libaqhbci8         1.5.99+1.6.0beta-1
libcbanking0       1.5.99+1.6.0beta-1
libchipcard2-0c2   1.9.14.99+1.9.15be
libg2banking1      1.5.99+1.6.0beta-1

/etc/init.d/libchipcard2-tools looks like this
chipcardd[19537]: chipcardd2.c:  722: Chipcardd v1.9.15.0beta started.
chipcardd[19537]: chipcardd2.c:  724: LibUSB supported.
chipcardd[19537]: chipcardd2.c:  727: LibSYSFS supported.
chipcardd[19539]: chipcardd2.c:  952: Initializing daemon.
chipcardd[19539]: usbttymonitor.c:  127: Will use sysfs to scan for ttyUSB 
devices
chipcardd[19538]: chipcardd2.c:  787: Nanny now supervising daemon 19539
chipcardd[19539]: cardserver.c:  388: USB Autoconfiguration enabled
chipcardd[19539]: cs_usb.c:  154: AUTOCONFIG: Created new reader 
"auto1-ccid_scm_x32" (USB: 04e6/e003)

driver.log:
driver(17231):driver.c:  334: Starting driver 
"/usr/lib/chipcard2-server/drivers/ifd" with lowlevel 
"/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.0.9.3"
driver(17231):driver.c:  753: Connected to server
driver(17231):driver.c: 2015: Incoming request "StartReader"
driver(17231):driver.c: 1276: Command: Start reader
driver(17231):driver.c: 1393: No DriversReaderId
driver(17231):driver.c: 1437: Reader "auto1-ccid_scm_x32" logs to 
"/var/log/chipcard2/drivers/ccid_ifd/auto1-ccid_scm_x32.log"
driver(17342):driver.c:  334: Starting driver 
"/usr/lib/chipcard2-server/drivers/ifd" with lowlevel 
"/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.0.9.3"
driver(17342):driver.c:  753: Connected to server
driver(17342):driver.c: 2015: Incoming request "StartReader"
driver(17342):driver.c: 1276: Command: Start reader
driver(17342):driver.c: 1393: No DriversReaderId
driver(17342):driver.c: 1437: Reader "auto1-ccid_scm_x32" logs to 
"/var/log/chipcard2/drivers/ccid_ifd/auto1-ccid_scm_x32.log"




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl