Re: (no subject)

Hi,

On Wednesday 30 November 2005 10:03, Tobias Krais wrote:
[...]
> auto1-tow_usb is my Palm :-) When I disconnect the palm this reader is
> no more there.
[...]
> aqhbci-qt3-wizard: client.c:207: LC_Client_CheckForError: Zusicherung
> »name« nicht erfüllt.
[...]
The recent version of libchipcard2 should fix that.

[...]
> tuxbox:/home/tobias# lsusb
> Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
> Port
> Bus 003 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
> Port
[...]
Oh, that's an ugly one: The reader does not identify itself by an unique id, 
instead the USB id of the usb-serial-converter applies...
Unfortunately the palm cradle seems to show the same behaviour... So 
autodetection isn't possible on your system :-(

This is extremely bad since your reader is sometimes at port 0 and sometime at 
port 1 (that mainly has to do with the palm cradle, which doesn't register as 
device at all unless it is activated).

Maybe you could send the content of /sys/bus/usb-serial/ (with the reader 
connected) and of /proc/tty/driver/usbserial ?


Regards
Martin

-- 
"Things are only impossible until they're not"

AqBanking - http://www.aquamaniac.de/aqbanking/
LibChipcard - http://www.libchipcard.de/


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&op=click