Re: libchipcard2 unter debian testing

Seiden Tiger <[email protected]> Mon, 8 May 2006 13:03:37 +0200

Newsgroups	gmane.comp.lib.libchipcard.devel
Message-ID	<[email protected]>

Hallo
> Nimm, wenn Du nur libchipcard2 willst, das aus unstable. Wenn Du
> zusätzlich AqBanking (ist gerade in der NEW-queue) brauchst, kann ich
> die Pakete auf
>  deb http://aqbanking.alioth.debian.org/debian/ unstable/
> empfehlen, die Versionen dort sind das Nah-Ziel für unstable und dann
> auch testing.
Die habe ich gerade mal installiert, leider ohne Erfolg. Mein Kartenleser SPR 
532 tut immer noch nicht (Ich kann ihn bisher nur mit der alten libchipcard1 
verwenden :-( ). 
chipcard-tool list
Server: 445f22ad
  Readers:
  - auto1-ccid_scm_x32 (ccid_scm_x32, port 0)

chipcard-tool check
/usr/lib/chipcard2-server/drivers/ccid: symbol lookup 
error: /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.1.0.1: 
undefined symbol: log_msg

auto1-ccid_scmx32.log hat immer die selbe Logmeldung
Init reader auto1-ccid_scm_x32

Driver log im Anhang.

Dir Firmware Version ist glaube ich bei 5.05.

Kann es sein das die Build optionen das verwenden des Lesers nicht zulassen?
./configure --disable-pcsclite --enable-usbdropdir=/usr/lib/chipcard2-server/lowlevel/ifd --enable-ccidtwindir=/usr/lib/chipcard2-server/lowlevel/ifd

Aber es scheint ja eher irgendwelche Probleme mit irgendwelchen Symbolen in 
dem pcsc Treiber zu geben. (Diesen Wust an Bibliotheken habe ich nicht ganz 
verstanden, insbesondere nicht welche Bibliotheken für meinen Leser gebraucht 
werden.)

Es würde mich sehr freuen wenn ich diesen Leser nicht nur als Briefbeschwerer 
verwenden könnte.
ST

driver.log (text/x-log, 3.1 KB)

3:2006/05/07 23-28-15:driver(20584):driver.c: 1453: No DriversReaderId
5:2006/05/07 23-28-15:driver(20584):driver.c: 1497: Reader "auto1-ccid_scm_x32" logs to "/var/log/chipcard2/drivers/ccid_ifd/auto1-ccid_scm_x32.log"
5:2006/05/07 23-28-48:driver(20658):driver.c:  345: Starting driver "/usr/lib/chipcard2-server/drivers/ccid" with lowlevel "/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.1.0.1"
5:2006/05/07 23-28-48:driver(20658):driver.c:  782: Connected to server
5:2006/05/07 23-28-49:driver(20658):driver.c: 2403: Incoming request "Driver_StartReader"
5:2006/05/07 23-28-49:driver(20658):driver.c: 1336: Command: Start reader
3:2006/05/07 23-28-49:driver(20658):driver.c: 1453: No DriversReaderId
5:2006/05/07 23-28-49:driver(20658):driver.c: 1497: Reader "auto1-ccid_scm_x32" logs to "/var/log/chipcard2/drivers/ccid_ifd/auto1-ccid_scm_x32.log"
5:2006/05/07 23-29-22:driver(20810):driver.c:  345: Starting driver "/usr/lib/chipcard2-server/drivers/ccid" with lowlevel "/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.1.0.1"
5:2006/05/07 23-29-22:driver(20810):driver.c:  782: Connected to server
5:2006/05/07 23-29-23:driver(20810):driver.c: 2403: Incoming request "Driver_StartReader"
5:2006/05/07 23-29-23:driver(20810):driver.c: 1336: Command: Start reader
3:2006/05/07 23-29-23:driver(20810):driver.c: 1453: No DriversReaderId
5:2006/05/07 23-29-23:driver(20810):driver.c: 1497: Reader "auto1-ccid_scm_x32" logs to "/var/log/chipcard2/drivers/ccid_ifd/auto1-ccid_scm_x32.log"
5:2006/05/07 23-29-56:driver(20888):driver.c:  345: Starting driver "/usr/lib/chipcard2-server/drivers/ccid" with lowlevel "/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.1.0.1"
5:2006/05/07 23-29-56:driver(20888):driver.c:  782: Connected to server
5:2006/05/07 23-29-57:driver(20888):driver.c: 2403: Incoming request "Driver_StartReader"
5:2006/05/07 23-29-57:driver(20888):driver.c: 1336: Command: Start reader
3:2006/05/07 23-29-57:driver(20888):driver.c: 1453: No DriversReaderId
5:2006/05/07 23-29-57:driver(20888):driver.c: 1497: Reader "auto1-ccid_scm_x32" logs to "/var/log/chipcard2/drivers/ccid_ifd/auto1-ccid_scm_x32.log"
5:2006/05/07 23-30-30:driver(20962):driver.c:  345: Starting driver "/usr/lib/chipcard2-server/drivers/ccid" with lowlevel "/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.1.0.1"
5:2006/05/07 23-30-30:driver(20962):driver.c:  782: Connected to server
5:2006/05/07 23-30-31:driver(20962):driver.c: 2403: Incoming request "Driver_StartReader"
5:2006/05/07 23-30-31:driver(20962):driver.c: 1336: Command: Start reader
3:2006/05/07 23-30-31:driver(20962):driver.c: 1453: No DriversReaderId
5:2006/05/07 23-30-31:driver(20962):driver.c: 1497: Reader "auto1-ccid_scm_x32" logs to "/var/log/chipcard2/drivers/ccid_ifd/auto1-ccid_scm_x32.log"
5:2006/05/07 23-31-04:driver(21063):driver.c:  345: Starting driver "/usr/lib/chipcard2-server/drivers/ccid" with lowlevel "/usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.1.0.1"
5:2006/05/07 23-31-04:driver(21063):driver.c:  782: Connected to server
5:2006/05/07 23-31-05:driver(21063):driver.c: 2403: Incoming request "Driver_StartReader"

chipcardd2.conf (text/plain, 707 B)

# derived from chipcardd2.conf example file
#    copyright   : (C) 2004 by Martin Preuss

# This is an example of a configuration file to be used when there are only
# USB readers known by Libchipcard2 in your system.
# Currently these known USB readers are:
# - Towitoko Chipdrive Pinpad
# - Reiner SCT Cyberjack
# - Kobil USB readers

# For serial readers (or unknown readers) a driver section is needed.


# if this is "0" then the server won't start
enabled="1"


server {
  # local server, using Unix Domain Sockets which can only be
  # connected from the very same machine
  typ="local"                 
  # addr="/tmp/.chipcard2/chipcard2.sock"
  addr="/var/run/chipcard2/chipcard2.sock"
} # server