Kobil-Leser wird nicht erkannt

Hallo zusammen,
nach längerer Abwesenheit wollte ich erneut versuchen, meinen Leser
wieder ans Laufen zu bekommen.

Wenn ich den libchipcardd2 starte bekomme ich im loglevel=notice einen
Fehler (?) angezeigt: 
5:2006/05/20 16-45-14:chipcardd(7896):cs_callbacks.c:   31: One of my
connections is down

Versuche ich dann chipcard-tool list erhalte ich folgendes: (Was mache
ich falsch? Wo fehlt in meiner Konfiguration noch was?)

Angehängt die Server und die Client .conf

Gruß Johannes



der Server:
johannes_01:/home/johannes # /usr/sbin/chipcardd2
--pidfile /var/run/chipcardd2.pid -f --loglevel notice --logtype console
5:2006/05/20 16-45-05:chipcardd(7895):chipcardd2.c:  724: Chipcardd
v2.1.4.2cvs started.
5:2006/05/20 16-45-05:chipcardd(7895):chipcardd2.c:  726: LibUSB
supported.
5:2006/05/20 16-45-05:chipcardd(7895):chipcardd2.c:  729: LibSYSFS
supported.
5:2006/05/20 16-45-05:chipcardd(7896):chipcardd2.c:  954: Initializing
daemon.
5:2006/05/20 16-45-05:chipcardd(7896):cs_init.c:  427: Autoconfiguration
enabled
5:2006/05/20 16-45-05:chipcardd(7895):chipcardd2.c:  789: Watcher now
supervising daemon 7896
5:2006/05/20 16-45-14:chipcardd(7896):clr_clientready.c:   93: Client
"446f2b73" started (chipcard-tool, Gwen 2.2.0-cvs-r1047, ChipCard
2.1.4.2cvs)
5:2006/05/20 16-45-14:chipcardd(7896):clr_notification.c:  468: Client
446f2b73: SetNotify [chipcard-tool/nobody]
5:2006/05/20 16-45-14:chipcardd(7896):cs_callbacks.c:   31: One of my
connections is down
5:2006/05/20 16-45-14:chipcardd(7896):clientmanager.c:  355: Removing
client 446f2b73 [chipcard-tool/nobody]


der Client:
johannes@johannes_01:~> chipcard-tool list
Server: 446f2b7b
  Readers:
johannes@johannes_01:~>   






Das Ganze mit loglevel=debug:

Der Server:
johannes_01:/home/johannes # /usr/sbin/chipcardd2
--pidfile /var/run/chipcardd2.pid -f --loglevel debug --logtype console
5:2006/05/20 16-51-38:chipcardd(7946):chipcardd2.c:  724: Chipcardd
v2.1.4.2cvs started.
5:2006/05/20 16-51-38:chipcardd(7946):chipcardd2.c:  726: LibUSB
supported.
5:2006/05/20 16-51-38:chipcardd(7946):chipcardd2.c:  729: LibSYSFS
supported.
5:2006/05/20 16-51-38:chipcardd(7947):chipcardd2.c:  954: Initializing
daemon.
5:2006/05/20 16-51-38:chipcardd(7946):chipcardd2.c:  789: Watcher now
supervising daemon 7947
6:2006/05/20 16-51-38:chipcardd(7947):chipcardd2.c:  991: Will now
initialize server.
5:2006/05/20 16-51-38:chipcardd(7947):cs_init.c:  427: Autoconfiguration
enabled
6:2006/05/20 16-51-38:chipcardd(7947):cs_init.c:  430: Initialising
paths
6:2006/05/20 16-51-38:chipcardd(7947):cs_init.c:  437: Initialising IPC
manager
6:2006/05/20 16-51-38:chipcardd(7947):cs_init.c:  444: Initialising
device manager
6:2006/05/20 16-51-38:chipcardd(7947):devicemanager.c:   91:
Initialising device manager
6:2006/05/20 16-51-38:chipcardd(7947):devicemanager.c:  222: Adding
driver "kobil_ctapi"
6:2006/05/20 16-51-38:chipcardd(7947):devicemanager.c:  501: Reloading
driver info files
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/ccid_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/cherry_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/cyberjack_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/kobil_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/omnikey_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/orga_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/scmx32_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/scm33x_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/tow_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/o2micro_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  144: Adding driver
dir "/usr/etc/chipcard2-server/drivers/cm_4000_ifd"
6:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  561: Could not read
file "/usr/etc/chipcard2-server/drivers/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
6:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  569: XML file
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/driver.xml" does not
contain a driver
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:   81: File
found: /usr/lib/chipcard2-server/lowlevel/libct.so
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
7:2006/05/20 16-51-38:chipcardd(7947):driverinfo.c:  102: File not found
in search paths
6:2006/05/20 16-51-38:chipcardd(7947):fullserver.c:   91: Initialising
card manager
6:2006/05/20 16-51-38:chipcardd(7947):cardmanager.c:   58: Initialising
card manager
6:2006/05/20 16-51-38:chipcardd(7947):fullserver.c:   98: Initialising
command manager
6:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:   77:
Initialising command manager
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/cards/card.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/cards/geldkarte.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/cards/memorycard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/cards/starcos.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/ccid_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/ccid_ifd/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/ccid_ifd/driver.xml" does not contain
<cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/cherry_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/cherry_ctapi/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cherry_ctapi/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/cyberjack_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/kobil_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/kobil_ctapi/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/kobil_ctapi/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/omnikey_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/omnikey_ifd/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/omnikey_ifd/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/orga_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/orga_ctapi/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/orga_ctapi/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/scmx32_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/scmx32_ifd/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/scmx32_ifd/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/scm33x_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/scm33x_ifd/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/scm33x_ifd/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/tow_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/tow_ctapi/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/tow_ctapi/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/o2micro_ctapi"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/o2micro_ctapi/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/o2micro_ctapi/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/cm_4000_ifd"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/cm_4000_ifd/driver.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cm_4000_ifd/driver.xml" does not
contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/ccid_ifd/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/ccid_ifd/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/ccid_ifd/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/ccid_ifd/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/ccid_ifd/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/ccid_ifd/cards/starcos.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/ccid_ifd/cards/card.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/cherry_ctapi/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/cherry_ctapi/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cherry_ctapi/cards/memorycard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/cards/card.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/cards/geldkarte.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack_ctapi/cards/starcos.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/ddv0.xml" does
not contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/ddv1.xml" does
not contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/geldkarte.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/geldkarte.xml"
does not contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/kvk.xml" does
not contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/processorcard.xml" does not contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/starcos.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  218: File
"/usr/etc/chipcard2-server/drivers/cyberjack2_ctapi/cards/starcos.xml"
does not contain <cards>
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/kobil_ctapi/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/kobil_ctapi/cards/card.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/kobil_ctapi/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/kobil_ctapi/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/kobil_ctapi/cards/geldkarte.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/kobil_ctapi/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/kobil_ctapi/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/kobil_ctapi/cards/starcos.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/omnikey_ifd/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/omnikey_ifd/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/omnikey_ifd/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/omnikey_ifd/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/omnikey_ifd/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/orga_ctapi/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/orga_ctapi/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/orga_ctapi/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/orga_ctapi/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/orga_ctapi/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/scmx32_ifd/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/scmx32_ifd/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/scmx32_ifd/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/scmx32_ifd/cards/geldkarte.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/scmx32_ifd/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/scmx32_ifd/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/scmx32_ifd/cards/starcos.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/scm33x_ifd/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/scm33x_ifd/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/scm33x_ifd/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/scm33x_ifd/cards/geldkarte.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/scm33x_ifd/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/scm33x_ifd/cards/processorcard.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/scm33x_ifd/cards/starcos.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  253: Sampling
files in "/usr/etc/chipcard2-server/drivers/tow_ctapi/cards"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/tow_ctapi/cards/ddv0.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/tow_ctapi/cards/ddv1.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file "/usr/etc/chipcard2-server/drivers/tow_ctapi/cards/kvk.xml"
7:2006/05/20 16-51-38:chipcardd(7947):commandmanager.c:  203: Loading
card file
"/usr/etc/chipcard2-server/drivers/tow_ctapi/cards/processorcard.xml"
6:2006/05/20 16-51-38:chipcardd(7947):fullserver.c:  105: Initialising
client manager
6:2006/05/20 16-51-38:chipcardd(7947):clientmanager.c:   55:
Initialising client manager
6:2006/05/20 16-51-38:chipcardd(7947):fullserver.c:  112: Initialising
service manager
6:2006/05/20 16-51-38:chipcardd(7947):servicemanager.c:   68:
Initialising service manager
6:2006/05/20 16-51-38:chipcardd(7947):chipcardd2.c: 1002: Ready to
service requests.

# $RCSfile$
#                             -------------------
#    cvs         : $Id: chipcardd2.conf.example 128 2005-10-22 16:07:39Z aquamaniac $
#    begin       : Mon Mar 01 2004
#    copyright   : (C) 2004 by Martin Preuss
#    email       : [email protected]
#
# ***************************************************************************
# *          Please see toplevel file COPYING for license details           *
# ***************************************************************************/
#
#
# This file is used by the chipcard2 daemon.
# Please modify it to your needs and copy it to
#           $PREFIX/etc/chipcard2-server/chipcardd2.conf
#
# if this is "0" then the server won't start
#

enabled="1"
# ===========================================================================
# Server Sockets
#
# These sections describe server points. You may use multiple of those
# sections (in that case the daemon will listen on multiple sockets).
# Please choose one of the sections below by removing the ".inactive" suffix.
#
#
# ---------------------------------------------------------------------------
# local server, using Unix Domain Sockets which can only be
# connected from the very same machine. This is the preferred mode on 
# *nix systems (like Linux, *BSD etc, but not on Windows which does not
# support Unix Domain sockets).
#
server {
  typ="local"                 
  addr="/var/run/chipcard2.comm"
  
  #
  # The default is ti use the first server section as the address to expect
  # drivers to connect to. If there are multiple addresses the server is to
  # bind to than the following selects the server to use for drivers.
  #
  int useForDrivers="1"
  
  #
  # The same as above, except for services.
  #
  int useForServices="1"
} # server


# ---------------------------------------------------------------------------
# public server using TCP sockets (not encrypted, you should not
# use such a server with the chipcard daemon)
#
server.inactive {
  typ="public"
  addr="127.0.0.1"
  port="55555"
} # server


# ---------------------------------------------------------------------------
# private server using SSL secured sockets.
# New certificates are stored in the folder given by "newcertdir",
# received certificates are checked against those in "certdir"
# This is the recommended mode on systems which can't use "local" (e.g.
# Windows).
#
server.inactive {
  typ="private"
  addr="127.0.0.1"
  port="55555"
  certdir="/etc/chipcard2-server/certificates/valid"
  newcertdir="/var/lib/chipcard2-server/certificates/new"
  certfile="/etc/chipcard2-server/cert.pem"
} # server


# ---------------------------------------------------------------------------
# secure server using SSL secured sockets. In addition to mode
# "private" the certificates of the clients are checked against
# those stored in the "certdir". If the client certificate could
# not be found or is invalid the connection is aborted.
#
server.inactive {
  typ="secure"
  addr="127.0.0.1"
  port="55555"
  certdir="/etc/chipcard2-server/certificates/valid"
  newcertdir="/var/lib/chipcard2-server/certificates/new"
  certfile="/etc/chipcard2-server/cert.pem"
} # server

#
# this section describes some basic configuration variables.
# For any missing variable a reasonable default value is used
#



# ===========================================================================
# Paths
#
# Starting with version 1.9.16 Libchipcard2 no longer depends on hardcoded
# paths. Instead on Windows the Registry is consulted and this group.
# This group here takes precedence, so if present all paths are taken from 
# here.
#

Paths {

#  char ServiceExecDir=""
#  char DataDir=""
#  char NewCertDir=""
#  char TrustedCertDir=""
#  char LogDir=""

} # Paths




# ===========================================================================
# Remote Drivers
#
# Remote drivers are used with thin clients: In such a configuration there
# is a central chipcard daemon to which the card readers of all thin clients
# connect. This is going to be used by Gnumed.
#

# if 0 then remote drivers are not allowed to connect to the server 
# default: "0"
#
allowRemote="1"



# ===========================================================================
# Device Manager
#
# This group contains all data for the Device Manager. The Device Manager
# handles the allocation and management of the reader devices.
#

DeviceManager {

  # -------------------------------------------------------------------------
  # Autoconfiguration
  #
  
  #
  # if "1" then autoconfiguration (via USB scanning) is disabled
  # For autoconfiguration to work libchipcard2-server must be linked against
  # libUSB. This is automatically done if libusb is available at compile time.
  #
  int disableAutoConf="1"
  
  #
  # if "1" then scanning for PCI devices is disabled.
  #
  int disablePciScan="1"
  
  #
  # if "1" then scanning for raw USB devices is disabled.
  #
  int disableUsbRawScan="1"
  
  #
  # if "1" then scanning for raw USB serial devices (/dev/ttyUSBx) is disabled.
  #
  int disableUsbTtyScan="1"
  
  
  #
  # minimum time in seconds which has to elapse between two hardware scans
  # A value of "0" makes the chipcard daemon only scan once (thus allowing
  # only initial setup of already connected readers)
  #
  int hardwareScanInterval="2"

  #
  # driver blacklisting (drivers in this list are ignored)
  #
  #char driverBlackList="ccid_ifd"

  # -------------------------------------------------------------------------
  # Timout Values
  #

  #
  # time to wait until the driver is actually started
  #
  int driverStartDelay="0"
  
  #
  # timeout when starting a driver (in seconds)
  #
  int driverStartTimeout="10"

  #
  # timeout when restarting a driver after an error (in seconds)
  #
  int driverRestartTime="10"
  
  #
  # timeout when starting a reader (including driverStartTimeout, in seconds)
  #
  int readerStartTimeout="20"
  
  #
  # time after which a driver is shut down when idle (in seconds)
  #
  int driverIdleTimeout="10"

  #
  # time to wait until the reader is actually started
  #
  int readerStartDelay="1"
  
  #
  # time after which a reader is shut down when idle (in seconds)
  #
  int readerIdleTimeout="10"
  
  #
  # maximum execution time for a command (in seconds)
  #
  readerCommandTimeout="60"

  #
  # timeout when restarting a reader after an error (in seconds)
  #
  int readerRestartTime="10"


  # -------------------------------------------------------------------------
  # Drivers
  #
  # A driver section contains information about a driver and the readers
  # supported by this driver.
  #
  # Please note that you only need driver sections for serial readers (i.e.
  # readers which are connected to COM1-COMx). USB readers are autodetected.
  #
  # If you have an USB reader which is not recognized by Libchipcard you 
  # really should drop an email to [email protected] containing the output
  # of the command "lsusb" and the following extra information:
  # - path and name of the driver
  # - location from where you downloaded the driver
  # - name of the card reader
  # That would allow me to add the driver to the list and hence to support
  # this card reader.
  #
  # However, if autoconfiguration is disabled (either by config file, see 
  # above or because libUSB is not available) you need a driver section and 
  # reader sections therein for every reader you want to use.
  #
  # To activate one of the examples below remove the ".inactive" suffix
  # (driver.inactive -> driver)
  
  
  # -------------------------------------------------------------------------
  # driver section for a Kobil Kaan Professional (serial)
  #
  # remove the ".inactive" of this group's name to enable the driver
  #

  driver {
    # the general type of the driver
    # Currently available are these:
    # - ctapi (for CTAPI type drivers)
    # - ifd (for lowlevel drivers written for PC/SC)
    # - ifdold (for lowlevel drivers written for old PC/SC)
    #
    char driverType="ctapi"
    
    # This name should not be modified, since this is the name used to lookup
    # the format of card commands in the cards XML files
    #
    char driverName="kobil_ctapi"
    
    # currently not used by the written drivers, but this is sent to the 
    # driver as a command line argument. New drivers might use this one.
    #
    char driverDataDir="/var/lib/chipcard2/drivers/ctapi"
    
    # path and name of the low-level driver file. This is the driver actually
    # provided by the manufacturer of the card reader
    #
    char libraryFile="/usr/lib/kobil/libct.so"
       }

    # -----------------------------------------------------------------------
    # This is a sub-section under a driver section.
    # One driver can generally run multiple readers (as long as the same
    # libraryFile is used, i.e. all readers are of the same type).
    # However, you should only use one reader per driver, only then they are
    # all handled independantly (each driver runs in its own process)
    #

    reader {
      #
      # you should not alter this name, it is used to lookup the commands
      # special to this reader in the cards XML files
      #
      char readerType="kobilpro"
      
      #
      # reader name (send to the application and used for logging)
      #
      char readerName="Kobil1"
      
      #
      # normally each reader has one card slot. However, there are some
      # readers which have two (or might have even more). With chipcard2 the 
      # number of slots is not limited anymore.
      #
      int slots="1"
  
      #
      # needed for serial readers
      #
      char busType="serial"
      
      #
      # the meaning of the port value is completely defined by the driver:
      # - for CTAPI drivers this is the value given as CTN argument to CT_init
      # - for IFD drivers this value is given as CHANNEL in IFDHCreateChannel
      # In the case of a Kobil Kaan the value "1" stands for COM1.
      #
      int port="2"
      
      #
      # describes the capabilities of the reader (comma separated list),
      # currently available are:
      # - keypad (->reader has a built-in key pad)
      # - display (->reader has a built-in display)
      # Only add flags which are supported by your reader.
      #
      char flags="keypad","display"
    }
  }




# ===========================================================================
# Card Manager
#
# This group contains all data for the Card Manager. The Card Manager
# handles the allocation and management of the chip cards which are inserted
# in readers.
#

CardManager {
  #
  # After this amount of seconds the reader a card is inserted in is allowed
  # to shut down.
  #
  int unusedTimeout="10"
  
  #
  # Keep a card at least this amount of seconds after it has been advertised
  # to a client.
  #
  int minimumKeepTime="20"
}



# ===========================================================================
# Service Manager
#
# This group contains all data for the Service Manager. The Service Manager
# handles the allocation and management of chipcard2 services.
#

ServiceManager {
  # -------------------------------------------------------------------------
  # Services
  #
  # A service basically is a chipcard client which is automatically started
  # by the chipcard server. It can be started on a users' demand (if a user
  # wants to use a service) or upon start of the server (if the flag 
  # "autoload" is given in the service section).


  #
  # time to wait until the service is actually started
  #
  int serviceStartDelay="0"
  
  #
  # timeout when starting a service (in seconds)
  #
  int serviceStartTimeout="10"

  #
  # timeout when restarting a service after an error (in seconds)
  #
  int serviceRestartTimeout="10"
  
  #
  # time after which a service is shut down when idle (in seconds)
  #
  int serviceIdleTimeout="10"

  
  # ---------------------------------------------------------------------------
  # Service section for German Medical Card Service
  #
  # This service is used by GnuMed to sample inserted German medical cards.
  # It is started when the chipcard server is started (due to the "autoload"
  # flag given below)
  
  service.inactive {
    char serviceType="kvks"
    char dataDir="/tmp"
    char flags="autoload" # this makes the server load this service upon
                          # its own start
  } # service
  
}

# $RCSfile$
#                             -------------------
#    cvs         : $Id: chipcardc2.conf.example 122 2005-10-22 00:42:09Z aquamaniac $
#    begin       : Mon Mar 01 2004
#    copyright   : (C) 2004 by Martin Preuss
#    email       : [email protected]
#
# ***************************************************************************
# *          Please see toplevel file COPYING for license details           *
# ***************************************************************************/
#
#
# This file is used by chipcard2 client programs.
# Please modify it to your needs and copy it to 
#              $PREFIX/etc/chipcard2-client/chipcardc2.conf
#

#
# Each server section tells a chipcard2 client where a chipcard2-server
# is sitting.
#
server {
  #
  # Connection type the server uses, currently supported are these:
  #
  # - "local"
  #   local server, using Unix Domain Sockets which can only be
  #   connected from the very same machine. In this case "addr" must point
  #   to the socket file used by the server.
  #   Some systems to not support these kinds of sockets (most notably
  #   Win32 systems).
  #   On all other systems this is the recommended type if no authentification
  #   is needed.
  # 
  # - "public"
  #   server using TCP sockets (not encrypted, for security reasons you should
  #   not use such a server with chipcard2)
  #
  # - "private"
  #   server using SSL secured sockets.
  #   New certificates are stored in the folder given by "newcertdir",
  #   received certificates are checked against those in "certdir"
  #   This is the recommended type if "local" is not available.
  #
  # - "secure"
  #   server using SSL secured sockets. In addition to mode
  #   "private" the certificate of the server is checked against
  #   those stored in the "certdir". If the server certificate could
  #   not be found or is invalid the connection is aborted.
  #
  typ="local"

  #
  # address the server is listening on (or socket file if type is "local")
  #
  addr="/var/run/chipcard2.comm"
  
  #
  # TCP port the server is listening on (not used if type is "local")
  #
  #port="55555"


  # if type is "private" or "secure" the following variables are used
  
  #
  # folder which contains valid SSL certificates (if the certificate of the
  # server is amongst those stored there then the connection is regarded as
  # secure).
  # Please note that this folder must be readable by every user who wants
  # to use libchipcard2-client programs.
  #
  #certdir="/etc/chipcard2-client/certificates/valid"
  
  #
  # this is the folder where newly received SSL certificates are stored.
  # By copying a file from this folder to the one given as "certdir" you
  # tell the SSL code that the certificates inside those files are to be
  # accepted
  #
  #newcertdir="/home/martin/.chipcard2/certificates/new"
  
  #
  # if type is "secure" then the client needs to send a certificate to the
  # server in order to identify itself. This file should be in PEM format.
  # (see OpenSSL documentation)
  # When creating a certificate you should set the "commonName" field in the
  # certificate to the name used to identify yourself to the chipcard2 
  # server (most likely your username or real name)
  #
  #certfile="/etc/chipcard2/client/cert.pem"
  
} # service