Advice On Picking Lib To Use

Hi Xiaofan,
Sorry, was not sure how deep you wanted me to go into this.  I have a 
custom product
using a Freescale micro with USB.  The unit is power distribution 
unit for large radio
control aircraft.  The USB interface is used for firmware updates, 
saving and restoring state,
setting up operating conditions and some adjustment of the 
functions.  The interface is all
control transfers. Message are short, no bulk transfers or iso.   Thanks

At 03:12 PM 3/6/2014 +0000, 
[email protected] wrote:
>Message: 8
>Date: Thu, 6 Mar 2014 08:48:21 +0800
>From: Xiaofan Chen <[email protected]>
>Subject: Re: [Libusb-win32-devel] Advice On Picking Lib To Use
>To: [email protected]
>Message-ID:
>         <CAGjSPUBEe2Aq=RZo7tzuYkzsHKFhiRMd6=877Ai8T5DLNcDmfA@mail.gmail.com>
>Content-Type: text/plain; charset=ISO-8859-1
>
>On Wed, Mar 5, 2014 at 11:16 PM, Robert Ritchey
><[email protected]> wrote:
> > Hi, I have a Qt project I want to integrate USB into.  I used Qt so I
> > could port across Windows, OS X and Linux.  I know there are
> > several libs to address the USB issue.
> > Given that I want to support all three OSs, which lib do you suggest
> > I use?
>
>You need to tell us more details. What is the USB device you
>are interested and what is the function of the USB device?
>
>If it is generic USB device, then you may want to use libusb
>which is cross-platform.
>  http://libusb.info/
>  https://github.com/libusb/libusb/wiki
>
>If it is an USB HID device, you may want to look at HIDAPI.
>  http://www.signal11.us/oss/hidapi/
>
>--
>Xiaofan

-Bob
--------------------------------------------------------------------
Robert Ritchey
Quest Engineering & Development, Inc.
Suite B-8
6125 South Ash Avenue
Tempe, AZ 85283
Tel: (480) 460-2652
E-Mail: [email protected]
E-Mail: [email protected]
E-Mail: [email protected]
WWW: www.QuestEngDev.com/
WWW: www.Smart-Fly.com/
-------------------------------------------------------------------- 


------------------------------------------------------------------------------
Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce.
With Perforce, you get hassle-free workflows. Merge that actually works. 
Faster operations. Version large binaries.  Built-in WAN optimization and the
freedom to use Git, Perforce or both. Make the move to Perforce.
http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk