Re: Apply fix "OpenUSBByName(): the device bus & addr must match" (8b9f6f33) for libusb

2017-02-16 16:34 GMT+01:00 Maximilian Stein <[email protected]>:

> Hi,
>

Hello,


>
> I noticed that commits [1] and [2], which fixed initialising a wrong USB
> device if the PID/VID are identical, only regards pcscd configured with
> libudev. In my opinion this can and should be fixed for pcscd configured
> with libusb as well. Please see the attached patch.
>
> Kind regards
> Maximilian Stein
>
> [1] 8b9f6f33b16e808a5769dbc4193e5f107a09a693 - OpenUSBByName(): the
> device bus & addr must match
> [2] e46fa30ead3f1eff72769d70be6adf031fafe606 - OpenUSBByName(): use
> device bus and address only when available
>
>
Applied in https://alioth.debian.org/plugins/scmgit/cgi-bin/gitweb.
cgi?p=pcsclite/CCID.git;a=commitdiff;h=8c57dcc5f73009359dcdaa0decba7f
703172e9df

You should move your pcsc-lite from libusb-1.0 to libudev for performance
reasons.
Unless you have a good reason to still use libusb-1.0 for the hotplug
detection?

Thanks

-- 
 Dr. Ludovic Rousseau

_______________________________________________
Pcsclite-muscle mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle