Re: Cyberjack e-com on openSuse 42.2 fails

Here the same experiment on debian (the same machine, the same USB-port 
etc.):

root@debian67:/# pcscd -d -a -f
00000000 pcscdaemon.c:263:main() pcscd set to foreground with debug send 
to stdout
00000084 utils.c:84:GetDaemonPid() Can't open /var/run/pcscd/pcscd.pid: 
No such file or directory
00000168 configfile.l:283:DBGetReaderListDir() Parsing conf directory: 
/etc/reader.conf.d
00000037 configfile.l:317:DBGetReaderListDir() Skipping non regular file: ..
00000014 configfile.l:355:DBGetReaderList() Parsing conf file: 
/etc/reader.conf.d/libccidtwin
00000067 configfile.l:317:DBGetReaderListDir() Skipping non regular file: .
00000021 pcscdaemon.c:569:main() pcsc-lite 1.8.13 daemon ready.
00002296 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000126 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000113 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x2109, PID: 0x2811, path: /dev/bus/usb/001/004
00000112 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x0557, PID: 0x8021, path: /dev/bus/usb/001/006
00000113 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x046D, PID: 0xC31C, path: /dev/bus/usb/001/007
00000108 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x046D, PID: 0xC31C, path: /dev/bus/usb/001/007
00000114 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x046D, PID: 0xC31C, path: /dev/bus/usb/001/007
00000105 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x0557, PID: 0x8021, path: /dev/bus/usb/001/006
00000101 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x2109, PID: 0x2811, path: /dev/bus/usb/001/004
00000096 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x1D6B, PID: 0x0002, path: /dev/bus/usb/001/001
00000119 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x0BDA, PID: 0x0129, path: /dev/bus/usb/001/005
00000134 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x1D6B, PID: 0x0003, path: /dev/bus/usb/002/001
07454515 hotplug_libudev.c:614:HPEstablishUSBNotifications() USB Device add
00000186 hotplug_libudev.c:296:get_driver() Looking for a driver for 
VID: 0x0C4B, PID: 0x0401, path: /dev/bus/usb/001/008
00000015 hotplug_libudev.c:435:HPAddDevice() Adding USB device: REINER 
SCT cyberJack pp_a2
00000062 readerfactory.c:1012:RFInitializeReader() Attempting startup of 
REINER SCT cyberJack pp_a2 (3865505373) 00 00 using 
/usr/lib/pcsc/drivers/libifd-cyberjack.bundle/Contents/Linux/libifd-cyberjack.so
CYBERJACK: Started
00001513 readerfactory.c:897:RFBindFunctions() Loading IFD Handler 3.0
00828093 readerfactory.c:350:RFAddReader() Using the pcscd polling thread
00050552 eventhandler.c:289:EHStatusHandlerThread() powerState: 
POWER_STATE_POWERED
00000048 Card ATR: 3B B7 94 00 81 31 FE 65 53 50 4B 32 33 90 00 D1
00404055 eventhandler.c:478:EHStatusHandlerThread() powerState: 
POWER_STATE_UNPOWERED