CCID_Receive Card absent or mute

--===============4262233611702148932==
Content-Type: multipart/alternative; boundary="001a113cc158f807160557d6c6a3"

--001a113cc158f807160557d6c6a3
Content-Type: text/plain; charset="UTF-8"

I am attempting to connect to a Mifare Plus SE 1K chip with a Pegoda N
reader, using node-pcsclite. My application runs fine with an Identiv
AMID2U Multi ISO reader, but I receive the following error when using the
Pegoda reader. Also, this reader is working fine with Mifare ULs and Mifare
Classic 1Ks.

CCID driver version: 1.4.7-1

pcsc-lite version 1.8.4.
Copyright (C) 1999-2002 by David Corcoran <[email protected]>.
Copyright (C) 2001-2011 by Ludovic Rousseau <[email protected]>.
Copyright (C) 2003-2004 by Damien Sauveron <[email protected]>.
Report bugs to <[email protected]>.
Enabled features: Linux arm-unknown-linux-gnueabihf serial usb libudev
usbdropdir=/usr/lib/pcsc/drivers ipcdir=/var/run/pcscd
configdir=/etc/reader.conf.d

Reader Name: NXP Pegoda 2 N (1105FF10)
OS: Debian GNU/Linux 7
Hardware: BeagleBone Black
Middleware: node-pcsclite 0.4.4
Smartcard: Mifare Plus SE 1K

Here is the pcscd log:

44953625 ccid_usb.c:1132:InterruptRead() after (0) (0)
00000164 NotifySlotChange: 50 03
00000078 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00003472 -> 000000 65 00 00 00 00 00 13 00 00 00
00012248 <- 000000 81 00 00 00 00 00 13 00 00 00
00000149 ifdhandler.c:1813:IFDHICCPresence() Card present
00000078 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000086 -> 000000 65 00 00 00 00 00 14 00 00 00
00011853 <- 000000 81 00 00 00 00 00 14 00 00 00
00001754 ifdhandler.c:1813:IFDHICCPresence() Card present
00000151 ifdhandler.c:1114:IFDHPowerICC() action: PowerUp,
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000099 -> 000000 62 00 00 00 00 00 15 01 00 00
00020451 <- 000000 80 0C 00 00 00 00 15 00 00 00 3B 87 80 01 C1 05 21 30 00
77 C1 65
00001760 eventhandler.c:372:EHStatusHandlerThread() powerState:
POWER_STATE_POWERED
00001563 eventhandler.c:387:EHStatusHandlerThread() Card inserted into NXP
Pegoda 2 N (1105FF10) 00 00
00000846 winscard_svc.c:731:MSGSignalClient() Signal client: 9
00000499 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 9
00000541 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 9
00000493 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 9
00001970 winscard_svc.c:731:MSGSignalClient() Signal client: 10
00000138 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 10
00000479 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00006148 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00002759 Card ATR: 3B 87 80 01 C1 05 21 30 00 77 C1 65
00000127 ifdhandler.c:282:IFDHPolling()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 5000 ms
00000061 ccid_usb.c:1090:InterruptRead() before (0)
00003206 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 10
00015388 winscard_msg_srv.c:230:ProcessEventsServer() Common channel packet
arrival
00000345 winscard_msg_srv.c:242:ProcessEventsServer()
ProcessCommonChannelRequest detects: 11
00000073 pcscdaemon.c:93:SVCServiceRunLoop() A new context thread creation
is requested: 11
00007584 winscard_svc.c:297:ContextThread() Thread is started:
dwClientID=11, threadContext @0xcb6d0
00001872 winscard_svc.c:315:ContextThread() Received command: CMD_VERSION
from client 11
00000724 winscard_svc.c:327:ContextThread() Client is protocol version 4:2
00000924 winscard_svc.c:347:ContextThread() CMD_VERSION rv=0x0 for client 11
00000574 winscard_svc.c:315:ContextThread() Received command:
ESTABLISH_CONTEXT from client 11
00000503 winscard.c:193:SCardEstablishContext() Establishing Context:
0x33A66535
00000058 winscard_svc.c:408:ContextThread() ESTABLISH_CONTEXT rv=0x0 for
client 11
00001530 winscard_svc.c:315:ContextThread() Received command: CONNECT from
client 11
00000170 winscard.c:235:SCardConnect() Attempting Connect to NXP Pegoda 2 N
(1105FF10) 00 00 using protocol: 3
00000043 winscard.c:328:SCardConnect() powerState: POWER_STATE_INUSE
00000034 prothandler.c:87:PHSetProtocol() Attempting PTS to T=1
00000042 ifdhandler.c:663:IFDHSetProtocolParameters() protocol T=1,
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000072 towitoko/atr.c:329:ATR_GetDefaultProtocol() default protocol: T=0
00000036 PPS: Sending request: FF 01 FE
00000047 -> 000000 6F 03 00 00 00 00 16 00 00 00 FF 01 FE
00806672 <- 000000 80 00 00 00 00 00 16 40 FE 00
00002169 commands.c:1393:CCID_Receive Card absent or mute
00002055 ifdhandler.c:887:IFDHSetProtocolParameters() PPS_Exchange Failed
00000625 prothandler.c:103:PHSetProtocol() PTS failed (605), using T=0
00000109 winscard_svc.c:449:ContextThread() CONNECT rv=0x80100066 for
client 11
00020293 ccid_usb.c:1132:InterruptRead() after (0) (0)
00000186 NotifySlotChange: 50 02
00000081 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000087 -> 000000 65 00 00 00 00 00 17 00 00 00
00013515 <- 000000 81 00 00 00 00 00 17 02 00 00
00000161 ifdhandler.c:1813:IFDHICCPresence() Card absent
00000069 eventhandler.c:325:EHStatusHandlerThread() Card Removed From NXP
Pegoda 2 N (1105FF10) 00 00
00000066 winscard_svc.c:731:MSGSignalClient() Signal client: 9
00000052 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 9
00000173 winscard_svc.c:731:MSGSignalClient() Signal client: 10
00000062 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 10
00000143 ifdhandler.c:282:IFDHPolling()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 600000 ms
00000061 ccid_usb.c:1090:InterruptRead() before (0)
00000831 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 9
00000564 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00001546 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00000344 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 9
00005804 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 10
00160101 ccid_usb.c:1132:InterruptRead() after (0) (0)
00000169 NotifySlotChange: 50 03
00000076 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000087 -> 000000 65 00 00 00 00 00 18 00 00 00
00012658 <- 000000 81 00 00 00 00 00 18 00 00 00
00000152 ifdhandler.c:1813:IFDHICCPresence() Card present
00000074 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000085 -> 000000 65 00 00 00 00 00 19 00 00 00
00012103 <- 000000 81 00 00 00 00 00 19 00 00 00
00000162 ifdhandler.c:1813:IFDHICCPresence() Card present
00000079 ifdhandler.c:1114:IFDHPowerICC() action: PowerUp,
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000089 -> 000000 62 00 00 00 00 00 1A 01 00 00
00020201 <- 000000 80 0C 00 00 00 00 1A 00 00 00 3B 87 80 01 C1 05 21 30 00
77 C1 65
00000169 eventhandler.c:372:EHStatusHandlerThread() powerState:
POWER_STATE_POWERED
00000063 eventhandler.c:387:EHStatusHandlerThread() Card inserted into NXP
Pegoda 2 N (1105FF10) 00 00
00000057 winscard_svc.c:731:MSGSignalClient() Signal client: 9
00000051 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 9
00000505 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 9
00000481 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 9
00001944 winscard_svc.c:731:MSGSignalClient() Signal client: 10
00000115 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 10
00000691 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00003856 winscard_svc.c:315:ContextThread() Received command:
CMD_GET_READERS_STATE from client 10
00003806 winscard_svc.c:315:ContextThread() Received command:
CMD_WAIT_READER_STATE_CHANGE from client 10
00000879 Card ATR: 3B 87 80 01 C1 05 21 30 00 77 C1 65
00000099 ifdhandler.c:282:IFDHPolling()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 5000 ms
00000058 ccid_usb.c:1090:InterruptRead() before (0)
00003742 winscard_svc.c:315:ContextThread() Received command: CONNECT from
client 11
00000155 winscard.c:235:SCardConnect() Attempting Connect to NXP Pegoda 2 N
(1105FF10) 00 00 using protocol: 3
00000068 winscard.c:328:SCardConnect() powerState: POWER_STATE_INUSE
00000061 prothandler.c:87:PHSetProtocol() Attempting PTS to T=1
00000074 ifdhandler.c:663:IFDHSetProtocolParameters() protocol T=1,
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000070 towitoko/atr.c:329:ATR_GetDefaultProtocol() default protocol: T=0
00000060 PPS: Sending request: FF 01 FE
00000088 -> 000000 6F 03 00 00 00 00 1B 00 00 00 FF 01 FE
00806487 <- 000000 80 00 00 00 00 00 1B 40 FE 00
00000159 commands.c:1393:CCID_Receive Card absent or mute
00000076 ifdhandler.c:887:IFDHSetProtocolParameters() PPS_Exchange Failed
00000069 prothandler.c:103:PHSetProtocol() PTS failed (605), using T=0
00000064 winscard_svc.c:449:ContextThread() CONNECT rv=0x80100066 for
client 11
00030148 ccid_usb.c:1132:InterruptRead() after (0) (0)
00000161 NotifySlotChange: 50 02
00000077 ifdhandler.c:1695:IFDHICCPresence()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)
00000086 -> 000000 65 00 00 00 00 00 1C 00 00 00
00013661 <- 000000 81 00 00 00 00 00 1C 02 00 00
00000162 ifdhandler.c:1813:IFDHICCPresence() Card absent
00000073 eventhandler.c:325:EHStatusHandlerThread() Card Removed From NXP
Pegoda 2 N (1105FF10) 00 00
00000065 winscard_svc.c:731:MSGSignalClient() Signal client: 9
00000050 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 9
00000185 winscard_svc.c:731:MSGSignalClient() Signal client: 10
00000059 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=0x0 for client 10
00000145 ifdhandler.c:282:IFDHPolling()
usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 600000 ms
00000061 ccid_usb.c:1090:InterruptRead() before (0)

Thank you, any help would be greatly appreciated.

-- 


*Casey Tickes Senior Product Innovation Engineer Gingerbread Shed*
O: 877-886-3314 x737
www.gingerbreadshed.com

--001a113cc158f807160557d6c6a3
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">I am attempting to connect to a Mifare Plus SE 1K chip wit=
h a Pegoda N reader, using node-pcsclite. My application runs fine with an =
Identiv AMID2U Multi ISO reader, but I receive the following error when usi=
ng the Pegoda reader. Also, this reader is working fine with Mifare ULs and=
 Mifare Classic 1Ks.<div><br></div><div>CCID driver version: 1.4.7-1</div><=
div><br></div><div><div>pcsc-lite version 1.8.4.</div><div>Copyright (C) 19=
99-2002 by David Corcoran &lt;<a href=3D"mailto:[email protected]">corc=
[email protected]</a>&gt;.</div><div>Copyright (C) 2001-2011 by Ludovic Rou=
sseau &lt;<a href=3D"mailto:[email protected]">ludovic.rousseau@free=
.fr</a>&gt;.</div><div>Copyright (C) 2003-2004 by Damien Sauveron &lt;<a hr=
ef=3D"mailto:[email protected]">[email protected]</a>&gt;.</div><div>Report=
 bugs to &lt;<a href=3D"mailto:[email protected]">[email protected]=
sclecard.com</a>&gt;.</div><div>Enabled features: Linux arm-unknown-linux-g=
nueabihf serial usb libudev usbdropdir=3D/usr/lib/pcsc/drivers ipcdir=3D/va=
r/run/pcscd configdir=3D/etc/reader.conf.d</div></div><div><br></div><div>R=
eader Name:=C2=A0NXP Pegoda 2 N (1105FF10)</div><div>OS:=C2=A0Debian GNU/Li=
nux 7</div><div>Hardware: BeagleBone Black</div><div>Middleware: node-pcscl=
ite 0.4.4</div><div>Smartcard: Mifare Plus SE 1K</div><div><br></div><div>H=
ere is the pcscd log:</div><div><br></div><div><div>44953625 ccid_usb.c:113=
2:InterruptRead() after (0) (0)</div><div>00000164 NotifySlotChange: 50 03<=
/div><div>00000078 ifdhandler.c:1695:IFDHICCPresence() usb:1fc9/0107:libude=
v:0:/dev/bus/usb/001/002 (lun: 0)</div><div>00003472 -&gt; 000000 65 00 00 =
00 00 00 13 00 00 00</div><div>00012248 &lt;- 000000 81 00 00 00 00 00 13 0=
0 00 00</div><div>00000149 ifdhandler.c:1813:IFDHICCPresence() Card present=
</div><div>00000078 ifdhandler.c:1695:IFDHICCPresence() usb:1fc9/0107:libud=
ev:0:/dev/bus/usb/001/002 (lun: 0)</div><div>00000086 -&gt; 000000 65 00 00=
 00 00 00 14 00 00 00</div><div>00011853 &lt;- 000000 81 00 00 00 00 00 14 =
00 00 00</div><div>00001754 ifdhandler.c:1813:IFDHICCPresence() Card presen=
t</div><div>00000151 ifdhandler.c:1114:IFDHPowerICC() action: PowerUp, usb:=
1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)</div><div>00000099 -&gt; =
000000 62 00 00 00 00 00 15 01 00 00</div><div>00020451 &lt;- 000000 80 0C =
00 00 00 00 15 00 00 00 3B 87 80 01 C1 05 21 30 00 77 C1 65</div><div>00001=
760 eventhandler.c:372:EHStatusHandlerThread() powerState: POWER_STATE_POWE=
RED</div><div>00001563 eventhandler.c:387:EHStatusHandlerThread() Card inse=
rted into NXP Pegoda 2 N (1105FF10) 00 00</div><div>00000846 winscard_svc.c=
:731:MSGSignalClient() Signal client: 9</div><div>00000499 winscard_svc.c:7=
34:MSGSignalClient() SIGNAL rv=3D0x0 for client 9</div><div>00000541 winsca=
rd_svc.c:315:ContextThread() Received command: CMD_GET_READERS_STATE from c=
lient 9</div><div>00000493 winscard_svc.c:315:ContextThread() Received comm=
and: CMD_WAIT_READER_STATE_CHANGE from client 9</div><div>00001970 winscard=
_svc.c:731:MSGSignalClient() Signal client: 10</div><div>00000138 winscard_=
svc.c:734:MSGSignalClient() SIGNAL rv=3D0x0 for client 10</div><div>0000047=
9 winscard_svc.c:315:ContextThread() Received command: CMD_GET_READERS_STAT=
E from client 10</div><div>00006148 winscard_svc.c:315:ContextThread() Rece=
ived command: CMD_GET_READERS_STATE from client 10</div><div>00002759 Card =
ATR: 3B 87 80 01 C1 05 21 30 00 77 C1 65</div><div>00000127 ifdhandler.c:28=
2:IFDHPolling() usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 5000 =
ms</div><div>00000061 ccid_usb.c:1090:InterruptRead() before (0)</div><div>=
00003206 winscard_svc.c:315:ContextThread() Received command: CMD_WAIT_READ=
ER_STATE_CHANGE from client 10</div><div>00015388 winscard_msg_srv.c:230:Pr=
ocessEventsServer() Common channel packet arrival</div><div>00000345 winsca=
rd_msg_srv.c:242:ProcessEventsServer() ProcessCommonChannelRequest detects:=
 11</div><div>00000073 pcscdaemon.c:93:SVCServiceRunLoop() A new context th=
read creation is requested: 11</div><div>00007584 winscard_svc.c:297:Contex=
tThread() Thread is started: dwClientID=3D11, threadContext @0xcb6d0</div><=
div>00001872 winscard_svc.c:315:ContextThread() Received command: CMD_VERSI=
ON from client 11</div><div>00000724 winscard_svc.c:327:ContextThread() Cli=
ent is protocol version 4:2</div><div>00000924 winscard_svc.c:347:ContextTh=
read() CMD_VERSION rv=3D0x0 for client 11</div><div>00000574 winscard_svc.c=
:315:ContextThread() Received command: ESTABLISH_CONTEXT from client 11</di=
v><div>00000503 winscard.c:193:SCardEstablishContext() Establishing Context=
: 0x33A66535</div><div>00000058 winscard_svc.c:408:ContextThread() ESTABLIS=
H_CONTEXT rv=3D0x0 for client 11</div><div>00001530 winscard_svc.c:315:Cont=
extThread() Received command: CONNECT from client 11</div><div>00000170 win=
scard.c:235:SCardConnect() Attempting Connect to NXP Pegoda 2 N (1105FF10) =
00 00 using protocol: 3</div><div>00000043 winscard.c:328:SCardConnect() po=
werState: POWER_STATE_INUSE</div><div>00000034 prothandler.c:87:PHSetProtoc=
ol() Attempting PTS to T=3D1</div><div>00000042 ifdhandler.c:663:IFDHSetPro=
tocolParameters() protocol T=3D1, usb:1fc9/0107:libudev:0:/dev/bus/usb/001/=
002 (lun: 0)</div><div>00000072 towitoko/atr.c:329:ATR_GetDefaultProtocol()=
 default protocol: T=3D0</div><div>00000036 PPS: Sending request: FF 01 FE<=
/div><div>00000047 -&gt; 000000 6F 03 00 00 00 00 16 00 00 00 FF 01 FE</div=
><div>00806672 &lt;- 000000 80 00 00 00 00 00 16 40 FE 00</div><div>0000216=
9 commands.c:1393:CCID_Receive Card absent or mute</div><div>00002055 ifdha=
ndler.c:887:IFDHSetProtocolParameters() PPS_Exchange Failed</div><div>00000=
625 prothandler.c:103:PHSetProtocol() PTS failed (605), using T=3D0</div><d=
iv>00000109 winscard_svc.c:449:ContextThread() CONNECT rv=3D0x80100066 for =
client 11</div><div>00020293 ccid_usb.c:1132:InterruptRead() after (0) (0)<=
/div><div>00000186 NotifySlotChange: 50 02</div><div>00000081 ifdhandler.c:=
1695:IFDHICCPresence() usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0=
)</div><div>00000087 -&gt; 000000 65 00 00 00 00 00 17 00 00 00</div><div>0=
0013515 &lt;- 000000 81 00 00 00 00 00 17 02 00 00</div><div>00000161 ifdha=
ndler.c:1813:IFDHICCPresence() Card absent</div><div>00000069 eventhandler.=
c:325:EHStatusHandlerThread() Card Removed From NXP Pegoda 2 N (1105FF10) 0=
0 00</div><div>00000066 winscard_svc.c:731:MSGSignalClient() Signal client:=
 9</div><div>00000052 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=3D0x0 =
for client 9</div><div>00000173 winscard_svc.c:731:MSGSignalClient() Signal=
 client: 10</div><div>00000062 winscard_svc.c:734:MSGSignalClient() SIGNAL =
rv=3D0x0 for client 10</div><div>00000143 ifdhandler.c:282:IFDHPolling() us=
b:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) 600000 ms</div><div>000=
00061 ccid_usb.c:1090:InterruptRead() before (0)</div><div>00000831 winscar=
d_svc.c:315:ContextThread() Received command: CMD_GET_READERS_STATE from cl=
ient 9</div><div>00000564 winscard_svc.c:315:ContextThread() Received comma=
nd: CMD_GET_READERS_STATE from client 10</div><div>00001546 winscard_svc.c:=
315:ContextThread() Received command: CMD_GET_READERS_STATE from client 10<=
/div><div>00000344 winscard_svc.c:315:ContextThread() Received command: CMD=
_WAIT_READER_STATE_CHANGE from client 9</div><div>00005804 winscard_svc.c:3=
15:ContextThread() Received command: CMD_WAIT_READER_STATE_CHANGE from clie=
nt 10</div><div>00160101 ccid_usb.c:1132:InterruptRead() after (0) (0)</div=
><div>00000169 NotifySlotChange: 50 03</div><div>00000076 ifdhandler.c:1695=
:IFDHICCPresence() usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)</d=
iv><div>00000087 -&gt; 000000 65 00 00 00 00 00 18 00 00 00</div><div>00012=
658 &lt;- 000000 81 00 00 00 00 00 18 00 00 00</div><div>00000152 ifdhandle=
r.c:1813:IFDHICCPresence() Card present</div><div>00000074 ifdhandler.c:169=
5:IFDHICCPresence() usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)</=
div><div>00000085 -&gt; 000000 65 00 00 00 00 00 19 00 00 00</div><div>0001=
2103 &lt;- 000000 81 00 00 00 00 00 19 00 00 00</div><div>00000162 ifdhandl=
er.c:1813:IFDHICCPresence() Card present</div><div>00000079 ifdhandler.c:11=
14:IFDHPowerICC() action: PowerUp, usb:1fc9/0107:libudev:0:/dev/bus/usb/001=
/002 (lun: 0)</div><div>00000089 -&gt; 000000 62 00 00 00 00 00 1A 01 00 00=
</div><div>00020201 &lt;- 000000 80 0C 00 00 00 00 1A 00 00 00 3B 87 80 01 =
C1 05 21 30 00 77 C1 65</div><div>00000169 eventhandler.c:372:EHStatusHandl=
erThread() powerState: POWER_STATE_POWERED</div><div>00000063 eventhandler.=
c:387:EHStatusHandlerThread() Card inserted into NXP Pegoda 2 N (1105FF10) =
00 00</div><div>00000057 winscard_svc.c:731:MSGSignalClient() Signal client=
: 9</div><div>00000051 winscard_svc.c:734:MSGSignalClient() SIGNAL rv=3D0x0=
 for client 9</div><div>00000505 winscard_svc.c:315:ContextThread() Receive=
d command: CMD_GET_READERS_STATE from client 9</div><div>00000481 winscard_=
svc.c:315:ContextThread() Received command: CMD_WAIT_READER_STATE_CHANGE fr=
om client 9</div><div>00001944 winscard_svc.c:731:MSGSignalClient() Signal =
client: 10</div><div>00000115 winscard_svc.c:734:MSGSignalClient() SIGNAL r=
v=3D0x0 for client 10</div><div>00000691 winscard_svc.c:315:ContextThread()=
 Received command: CMD_GET_READERS_STATE from client 10</div><div>00003856 =
winscard_svc.c:315:ContextThread() Received command: CMD_GET_READERS_STATE =
from client 10</div><div>00003806 winscard_svc.c:315:ContextThread() Receiv=
ed command: CMD_WAIT_READER_STATE_CHANGE from client 10</div><div>00000879 =
Card ATR: 3B 87 80 01 C1 05 21 30 00 77 C1 65</div><div>00000099 ifdhandler=
.c:282:IFDHPolling() usb:1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0) =
5000 ms</div><div>00000058 ccid_usb.c:1090:InterruptRead() before (0)</div>=
<div>00003742 winscard_svc.c:315:ContextThread() Received command: CONNECT =
from client 11</div><div>00000155 winscard.c:235:SCardConnect() Attempting =
Connect to NXP Pegoda 2 N (1105FF10) 00 00 using protocol: 3</div><div>0000=
0068 winscard.c:328:SCardConnect() powerState: POWER_STATE_INUSE</div><div>=
00000061 prothandler.c:87:PHSetProtocol() Attempting PTS to T=3D1</div><div=
>00000074 ifdhandler.c:663:IFDHSetProtocolParameters() protocol T=3D1, usb:=
1fc9/0107:libudev:0:/dev/bus/usb/001/002 (lun: 0)</div><div>00000070 towito=
ko/atr.c:329:ATR_GetDefaultProtocol() default protocol: T=3D0</div><div>000=
00060 PPS: Sending request: FF 01 FE</div><div>00000088 -&gt; 000000 6F 03 =
00 00 00 00 1B 00 00 00 FF 01 FE</div><div>00806487 &lt;- 000000 80 00 00 0=
0 00 00 1B 40 FE 00</div><div>00000159 commands.c:1393:CCID_Receive Card ab=
sent or mute</div><div>00000076 ifdhandler.c:887:IFDHSetProtocolParameters(=
) PPS_Exchange Failed</div><div>00000069 prothandler.c:103:PHSetProtocol() =
PTS failed (605), using T=3D0</div><div>00000064 winscard_svc.c:449:Context=
Thread() CONNECT rv=3D0x80100066 for client 11</div><div>00030148 ccid_usb.=
c:1132:InterruptRead() after (0) (0)</div><div>00000161 NotifySlotChange: 5=
0 02</div><div>00000077 ifdhandler.c:1695:IFDHICCPresence() usb:1fc9/0107:l=
ibudev:0:/dev/bus/usb/001/002 (lun: 0)</div><div>00000086 -&gt; 000000 65 0=
0 00 00 00 00 1C 00 00 00</div><div>00013661 &lt;- 000000 81 00 00 00 00 00=
 1C 02 00 00</div><div>00000162 ifdhandler.c:1813:IFDHICCPresence() Card ab=
sent</div><div>00000073 eventhandler.c:325:EHStatusHandlerThread() Card Rem=
oved From NXP Pegoda 2 N (1105FF10) 00 00</div><div>00000065 winscard_svc.c=
:731:MSGSignalClient() Signal client: 9</div><div>00000050 winscard_svc.c:7=
34:MSGSignalClient() SIGNAL rv=3D0x0 for client 9</div><div>00000185 winsca=
rd_svc.c:731:MSGSignalClient() Signal client: 10</div><div>00000059 winscar=
d_svc.c:734:MSGSignalClient() SIGNAL rv=3D0x0 for client 10</div><div>00000=
145 ifdhandler.c:282:IFDHPolling() usb:1fc9/0107:libudev:0:/dev/bus/usb/001=
/002 (lun: 0) 600000 ms</div><div>00000061 ccid_usb.c:1090:InterruptRead() =
before (0)</div><div><br></div><div>Thank you, any help would be greatly ap=
preciated.</div><div><br></div>-- <br><div class=3D"gmail_signature"><span =
style=3D"font-family:arial,helvetica,sans-serif"><strong>Casey=C2=A0Tickes<=
br>
Senior Product Innovation Engineer<br>
Gingerbread Shed</strong><br>
O:=C2=A0877-886-3314 x737<br>
<a href=3D"http://www.gingerbreadshed.com" target=3D"_blank">www.gingerbrea=
dshed.com</a></span></div>
</div></div>

--001a113cc158f807160557d6c6a3--


--===============4262233611702148932==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Pcsclite-muscle mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle
--===============4262233611702148932==--