Re: access to SmartTerminal XX44

2014-03-24 13:08 GMT+01:00 Vieri <[email protected]>:
> ----- Original Message -----
> From: Ludovic Rousseau <[email protected]>
>
>> Windows can't display the "Clock rate" and "BWT" because the Windows
>> diagnostic tool uses SCardGetAttrib() with the attribute
>> SCARD_ATTR_CURRENT_CLK (tag: 0x80202) that are is supported by the
>> PC/SC on the GNU/Linux side.
>>
>> Maybe your Minidriver, or whatever code is running on the Windows side
>> to support your card, is also confused by unsupported attributes for
>> SCardGetAttrib().
>>
>> Can you debug/modify the Windows code?
>
> Unfortunately as far as I can tell the Windows software is closed source.
> This is what I have installed on the Windows Terminal Server:
>
> AuthentIC Webpack v4.0.8 (Oberthur Card Systems)
> Cherry Smart Device Package V1.9 Build 2 (v. 1.9.0.2) (Cherry GmbH http://support.cherry.de)
> Cherry Tools V4.3 Rev.3 Build 6 (v. 4.3.3.6) (Cherry GmbH http://support.cherry.de)
>
> I suppose the first package is the smartcard firmware, the second is the reader driver and the third are reader tools such
> as the PC/SC diagnostics tool I used.
>
> The only thing I can try is to downgrade or upgrade one of these software packages.
>
> I downloaded the Windows software from:
> http://www.cherry.de/files/software/CherrySmartCard-Setup_32_EN.zip
> http://www.cherry.de/files/software/CherrySmartCard-Setup_31_EN.zip
> http://www.cherry.de/files/software/Cherry_Tools_59_EN.zip
> http://www.cherry.de/files/software/Cherry_Tools_58_EN.zip
> http://www.cherry.de/files/software/Cherry_Tools_54_EN.zip
>
> As a side note (not sure if it's useful), when connecting from Windows client the AuntentIC Manager software (Oberthur Card Systems) reports:
> Smart card information:
> Label: IDone Classic Card
> Model: Cosmo64 RSA v5.4
> Firmware: Version 0.00
> Manufacturer: Oberthur Card Systems
> Serial Number: 0000000014D73843
> Free memory: 31744 bytes
> AuthentIC Manager version 3.4.1.0
> Oberthur Card Systems
>
> After installing CherrySmartCard-Setup_32_EN.zip and connecting from Linux with rdesktop, I'm still getting the same clock sync rate error.
> If I remove CherrySmartCard-Setup_32_EN and install CherrySmartCard-Setup_31_EN.zip and connect from Linux with rdesktop, I get the same error.
>
> In any case, the PC/SC diagnostics tool seems to have the same version number in both CherrySmartCard-Setup_32_EN and CherrySmartCard-Setup_31_EN.
>
> I don't know how to debug this.
>
> I guess I'm stuck here. The only thing I can do is modify the ccid/pcscd part in Linux and recompile. Would it be useful to tamper somehow with SCARD_ATTR_CURRENT_CLK?

That may make the "PC/SC diagnostics tool" more happy.
But that may not solve your real problem with the card certificates. I
think that the problem comes from "AuthentIC Webpack v4.0.8 (Oberthur
Card Systems)" software.

> Can pcscd "debug" what the Windows driver is trying to call?

Yes. It is in my previous email.

Bye

-- 
 Dr. Ludovic Rousseau