Re: acr122u running on beaglebone black wheezy but not on jessie

2016-04-01 18:56 GMT+02:00 toni incog <[email protected]>:

> Hi,
>

Hello,


>
> I can't get the acr122U usb running on jessie while with the same kernel I
> can get it running fine on wheezy. am64 jessie als works fine.
>
> Both do have:
>
> blacklist pn533
> blacklist nfc
>
> and
>
> apt-get install libpcsclite1 pcsc-tools pcscd libacsccid1
>
> On wheezy the acsccid driver is used:
>
> 0003236 hotplug_libudev.c:260:get_driver() Looking for a driver for VID: 0x072F, PID: 0x2200, path: /dev/bus/usb/001/003
> 00001422 hotplug_libudev.c:311:HPAddDevice() Adding USB device: ACS ACR122U
> 00002064 readerfactory.c:941:RFInitializeReader() Attempting startup of ACS ACR122U 00 00 using /usr/lib/pcsc/drivers/ifd-acsccid.bundle/Contents/Linux/libacsccid.so
> 00007435 readerfactory.c:831
>
> but on jessie not. Probably that's the prob but I don't understand why. Guess I've to build from src but that'sa bit more involved on this box.
>
> Any pointers will be welcomed.
>
>
From your log you are using the driver  ifd-acsccid.bundle. I guess that is
the ACS driver.

Why do you write that you do not use the ACS driver on Jessie?
What driver are you using on Jessie?

Bye

-- 
 Dr. Ludovic Rousseau

_______________________________________________
Pcsclite-muscle mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle