Re: pccs-lite 1.8.xx on Solaris 11

Hi All,

I also checked the reader's behaviour under Windows by sending the
offending command. The card/reader combo returns an unexpected value also.

I am looking at circumventing the problem by changing the APDU being sent
to the card to see if the issue is fixed.

Regards

William To

On Wed, May 18, 2016 at 4:46 PM, Ludovic Rousseau <
[email protected]> wrote:

>
>
> 2016-05-18 10:24 GMT+02:00 William To <[email protected]>:
>
>> Hi All,
>>
>> Log is here:
>>
>> pcscd log:
>>
>> 00000169 winscard_svc.c:308:() Received command: TRANSMIT from client 10
>> 00000055 winscard.c:1636:() Send Protocol: T=0
>> 00000025 APDU: 00 A4 00 00 00
>> 00000028 ifdhandler.c:1264:() usb:04e6/5810:libusb:/dev/usb:4e6.5810/0
>> (lun: 0)
>> 00000026 commands.c:1412:() T=0 (extended): 5 bytes
>> 00000022 -> 000000 6F 05 00 00 00 00 5C 00 00 00 00 A4 00 00 00
>> 00017558 <- 000000 80 1C 00 00 00 00 5C 00 00 00 6F 18 83 02 3F 00 88 01
>> 00 8A 01 05 82 02 3F 00 8D 02 00 03 84 00 8C 00 AB 00 90 00
>> 00000065 commands.c:1364:() overrun by 26 bytes
>>
>
> The reader sent 28 (0x1C) bytes of data. But the driver was expecting only
> 2 bytes at most. So 26 bytes are in excess.
>
> Maybe it is a problem with your application that is expecting only 2 bytes
> for this APDU command and passed a reception buffer for only 2 bytes.
> Or it is a problem with the Solaris version of pcsc-lite.
>
> Bye
>
> --
>  Dr. Ludovic Rousseau
>
> _______________________________________________
> Pcsclite-muscle mailing list
> [email protected]
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle
>

_______________________________________________
Pcsclite-muscle mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle