Re: Limited RAM stdio replacement for newlib

On Fri, Sep 21, 2018 at 8:46 AM Keith Packard <[email protected]> wrote:
>
>
> I build embedded systems with limited RAM; ARM cortex M0-M4 parts with
> as little as 4kB of RAM and 32kB of ROM. With these tiny systems, the
> traditional newlib stdio implementation can't be used as it requires
Did you try newlib-nano options?  In case it doesn't fit into your use
case either, is it possible to improve nano instead?

Thanks,
bin
> more memory than I have available. I suspect I'm not alone and wanted to
> share what I'm using. Here's a link to my current git repository with
> the code:
>
>         https://keithp.com/cgit/newlib.git/
>
> I looked at the stdio implementation in the AVR libc:
>
>         https://www.nongnu.org/avr-libc/
>
> and found that it's architecture was a good match for my
> requirements. RAM required for a simple stdin/stdout console app is as
> little as 16 bytes. And it doesn't use malloc, which means I can do
> fully static memory allocation.
>
> A FILE structure contains a tiny amount of state along with function
> pointers to get and/or put a single character. There's no internal
> buffering, and not a lot of nested function calls, which is nice in
> reducing stack usage.
>
> I've also used the libc included with SDCC, and that is even smaller but
> it doesn't support multiple FILEs at all, which makes it usable only for
> applications with stdin/stdout as their only use of stdio.
>
> The code as provided by AVR libc has a bunch of AVR assembly code and
> dependence on AVR data types -- the AVR environment provides only 32-bit
> floats, and makes 'double' an alias for that type. I've replaced the
> assembly code with C code and extended it to support 64-bit floats for
> both printf and scanf. I've also included a few tests to check printf
> and scanf to make sure they work correctly. Those can be built natively
> so that the library can be tested without needing a separate target
> machine.
>
> To build this library, I've constructed a parallel build system using
> meson so that I didn't need to change the existing autotools build
> system. This has a nice advantage of speeding up building the library.
> Configuring the build takes less than 20 seconds. Compiling 20
> variations of the library for different embedded ARM configurations
> takes about 5 minutes on my low-power laptop.
>
> I've been upstreaming the changes I'm making in the core newlib sources
> so that all of the stdio and meson changes simply add new files.
>
> I've packaged the resulting arm-none-eabi library for Debian and it's
> sitting in the 'new' queue at this point. Eventually it will become part
> of a Debian distribution and may become the default library for use by
> the arm-none-eabi toolchain if that makes sense.
>
> I'd love to hear from others interested in using newlib in these smaller
> systems and whether it might make sense to merge these changes into the
> main newlib repository.
>
> --
> -keith



-- 
Regards.