Re: [Arm] Align comments and spaces in crt0.S libgloss and sys/arm
Alexander Fedotov <[email protected]>
| Newsgroups | gmane.comp.lib.newlib |
|---|---|
| Message-ID | <CAN8C2CrenFgfvtbNLmNdGDDgVimCSjvERLH6qBG1JP51=kxNoQ@mail.gmail.com> |
My apologizes. Correct patch below. OK to apply ? If yes, please push it for me since I have no commit rights. From 6af021f34b1e6d01445db1e08f877737ac523a53 Mon Sep 17 00:00:00 2001 From: Alexander Fedotov <[email protected]> Date: Thu, 11 Apr 2019 15:28:05 +0300 Subject: [PATCH 1/2] Align comments and spaces in libgloss/arm/crt0.S and newlib/libc/sys/arm/crt0.S to ease further code alignment. --- libgloss/arm/crt0.S | 135 +++++++++++++++++++------------------ newlib/libc/sys/arm/crt0.S | 18 ++--- 2 files changed, 78 insertions(+), 75 deletions(-) diff --git a/libgloss/arm/crt0.S b/libgloss/arm/crt0.S index c708f63d8..1deb73aa5 100644 --- a/libgloss/arm/crt0.S +++ b/libgloss/arm/crt0.S @@ -68,8 +68,10 @@ #endif .endm +/******************************************************************************* +* Main library startup code. +*******************************************************************************/ .align 0 - FUNC_START _mainCRTStartup FUNC_START _start #if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__) @@ -90,14 +92,14 @@ #endif #endif -/* Start by setting up a stack */ +/* Start by setting up a stack. */ #ifdef ARM_RDP_MONITOR - /* Issue Demon SWI to read stack info */ - swi SWI_GetEnv /* Returns command line in r0 */ - mov sp,r1 /* and the highest memory address in r1 */ + /* Issue Demon SWI to read stack info. */ + swi SWI_GetEnv /* Returns command line in r0. */ + mov sp,r1 /* and the highest memory address in r1. */ - /* stack limit is at end of data */ - /* allow slop for stack overflow handling and small frames */ + /* Stack limit is at end of data. */ + /* Allow slop for stack overflow handling and small frames. */ #ifdef THUMB1_ONLY ldr r0, .LC2 adds r0, #128 @@ -109,19 +111,19 @@ #endif #else #ifdef ARM_RDI_MONITOR - /* Issue Angel SWI to read stack info */ + /* Issue Angel SWI to read stack info. */ movs r0, #AngelSWI_Reason_HeapInfo - adr r1, .LC0 /* point at ptr to 4 words to receive data */ + adr r1, .LC0 /* Point at ptr to 4 words to receive data. */ #ifdef THUMB_VXM bkpt AngelSWI #elif defined(__thumb2__) - /* We are in thumb mode for startup on armv7 architectures. */ + /* We are in thumb mode for startup on armv7 architectures. */ AngelSWIAsm (AngelSWI) #else - /* We are always in ARM mode for startup on pre armv7 archs. */ + /* We are always in ARM mode for startup on pre armv7 archs. */ AngelSWIAsm (AngelSWI_ARM) #endif - ldr r0, .LC0 /* point at values read */ + ldr r0, .LC0 /* Point at values read. */ /* Set __heap_limit. */ ldr r1, [r0, #4] @@ -148,14 +150,15 @@ to skip setting sp/sl to 0 here. - Considering M-profile processors, We might want to initialize sp by the first entry of vector table and return 0 to SYS_HEAPINFO - semihosting call, which will be skipped here. */ + semihosting call, which will be skipped here. */ cmp r1, #0 beq .LC26 mov sp, r1 .LC26: cmp r2, #0 beq .LC27 - /* allow slop for stack overflow handling and small frames */ + + /* Allow slop for stack overflow handling and small frames. */ #ifdef THUMB1_ONLY adds r2, #128 adds r2, #128 @@ -163,9 +166,10 @@ #else add sl, r2, #256 #endif + .LC27: #else - /* Set up the stack pointer to a fixed value */ + /* Set up the stack pointer to a fixed value. */ /* Changes by toralf: - Allow linker script to provide stack via __stack symbol - see defintion of .Lstack @@ -175,7 +179,7 @@ Loosely based on init.s from ARM/Motorola example code. Note: Mode switch via CPSR is not allowed once in non-privileged mode, so we take care not to enter "User" to set up its sp, - and also skip most operations if already in that mode. */ + and also skip most operations if already in that mode. */ ldr r3, .Lstack cmp r3, #0 @@ -192,42 +196,42 @@ /* Note: This 'mov' is essential when starting in User, and ensures we always get *some* sp value for the initial mode, even if we have somehow missed it below (in which case it gets the same - value as FIQ - not ideal, but better than nothing.) */ + value as FIQ - not ideal, but better than nothing). */ mov sp, r3 #ifdef PREFER_THUMB /* XXX Fill in stack assignments for interrupt modes. */ #else mrs r2, CPSR - tst r2, #0x0F /* Test mode bits - in User of all are 0 */ - beq .LC23 /* "eq" means r2 AND #0x0F is 0 */ - msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled */ + tst r2, #0x0F /* Test mode bits - in User of all are 0. */ + beq .LC23 /* "eq" means r2 AND #0x0F is 0. */ + msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled. */ mov sp, r3 - sub sl, sp, #0x1000 /* This mode also has its own sl (see below) */ + sub sl, sp, #0x1000 /* This mode also has its own sl (see below). */ mov r3, sl - msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled */ + msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled. */ mov sp, r3 sub r3, r3, #0x1000 - msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled */ + msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled. */ mov sp, r3 sub r3, r3, #0x1000 - msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled */ + msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled. */ mov sp, r3 sub r3, r3, #0x2000 - msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled */ + msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled. */ mov sp, r3 - sub r3, r3, #0x8000 /* Min size 32k */ - bic r3, r3, #0x00FF /* Align with current 64k block */ + sub r3, r3, #0x8000 /* Min size 32k. */ + bic r3, r3, #0x00FF /* Align with current 64k block. */ bic r3, r3, #0xFF00 str r3, [r3, #-4] /* Move value into user mode sp without */ - ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm */ + ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm. */ orr r2, r2, #0xC0 /* Back to original mode, presumably SVC, */ - msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1 */ + msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1. */ #endif .LC23: /* Setup a default stack-limit in-case the code has been @@ -243,24 +247,24 @@ subs r2, r3, r2 mov sl, r2 #else - sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl */ + sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl. */ #endif #endif #endif /* Zero the memory in the .bss section. */ - movs a2, #0 /* Second arg: fill value */ - mov fp, a2 /* Null frame pointer */ - mov r7, a2 /* Null frame pointer for Thumb */ + movs a2, #0 /* Second arg: fill value. */ + mov fp, a2 /* Null frame pointer. */ + mov r7, a2 /* Null frame pointer for Thumb. */ - ldr a1, .LC1 /* First arg: start of memory block */ + ldr a1, .LC1 /* First arg: start of memory block. */ ldr a3, .LC2 - subs a3, a3, a1 /* Third arg: length of block */ + subs a3, a3, a1 /* Third arg: length of block. */ #if __thumb__ && !defined(PREFER_THUMB) - /* Enter Thumb mode.... */ - add a4, pc, #1 /* Get the address of the Thumb block */ - bx a4 /* Go there and start Thumb decoding */ + /* Enter Thumb mode... */ + add a4, pc, #1 /* Get the address of the Thumb block. */ + bx a4 /* Go there and start Thumb decoding. */ .code 16 .global __change_mode @@ -271,9 +275,8 @@ __change_mode: bl FUNCTION (memset) #if !defined (ARM_RDP_MONITOR) && !defined (ARM_RDI_MONITOR) /* Changes by toralf: Taken from libgloss/m68k/crt0.S - * initialize target specific stuff. Only execute these - * functions it they exist. - */ + initialize target specific stuff. Only execute these + functions it they exist. */ ldr r3, .Lhwinit cmp r3, #0 beq .LC24 @@ -285,24 +288,24 @@ __change_mode: indirect_call r3 .LC25: - movs r0, #0 /* no arguments */ - movs r1, #0 /* no argv either */ + movs r0, #0 /* No arguments. */ + movs r1, #0 /* No argv either. */ #else - /* Need to set up standard file handles */ + /* Need to set up standard file handles. */ bl FUNCTION (initialise_monitor_handles) #ifdef ARM_RDP_MONITOR - swi SWI_GetEnv /* sets r0 to point to the command line */ + swi SWI_GetEnv /* Sets r0 to point to the command line. */ movs r1, r0 #else movs r0, #AngelSWI_Reason_GetCmdLine - ldr r1, .LC30 /* Space for command line */ + ldr r1, .LC30 /* Space for command line. */ AngelSWIAsm (AngelSWI) ldr r1, .LC30 ldr r1, [r1] #endif - /* Parse string at r1 */ - movs r0, #0 /* count of arguments so far */ + /* Parse string at r1. */ + movs r0, #0 /* Count of arguments so far. */ /* Push a NULL argument onto the end of the list. */ #ifdef __thumb__ push {r0} @@ -310,7 +313,7 @@ __change_mode: stmfd sp!, {r0} #endif .LC10: -/* Skip leading blanks */ +/* Skip leading blanks. */ #ifdef __thumb__ ldrb r3, [r1] adds r1, #1 @@ -322,7 +325,7 @@ __change_mode: cmp r3, #' ' beq .LC10 -/* See whether we are scanning a string */ +/* See whether we are scanning a string. */ cmp r3, #'"' #ifdef __thumb__ beq .LC20 @@ -333,17 +336,17 @@ __change_mode: b .LC22 .LC21: - movs r2, #' ' /* terminator type */ - subs r1, r1, #1 /* adjust back to point at start char */ + movs r2, #' ' /* Terminator type. */ + subs r1, r1, #1 /* Adjust back to point at start char. */ .LC22: #else cmpne r3, #'\'' moveq r2, r3 - movne r2, #' ' /* terminator type */ - subne r1, r1, #1 /* adjust back to point at start char */ + movne r2, #' ' /* Terminator type. */ + subne r1, r1, #1 /* Adjust back to point at start char. */ #endif -/* Stack a pointer to the current argument */ +/* Stack a pointer to the current argument. */ #ifdef __thumb__ push {r1} #else @@ -359,16 +362,16 @@ __change_mode: #endif cmp r3, #0 beq .LC12 - cmp r2, r3 /* reached terminator? */ + cmp r2, r3 /* Reached terminator ? */ bne .LC11 movs r2, #0 subs r3, r1, #1 - strb r2, [r3] /* terminate the arg string */ + strb r2, [r3] /* Terminate the arg string. */ b .LC10 .LC12: - mov r1, sp /* point at stacked arg pointers */ - /* We've now got the stacked args in order reverse the */ + mov r1, sp /* Point at stacked arg pointers. */ + /* We've now got the stacked args in order, reverse them. */ #ifdef __thumb__ movs r2, r0 lsls r2, #2 @@ -390,10 +393,10 @@ __change_mode: bics r4, r5 mov sp, r4 #else - add r2, sp, r0, LSL #2 /* End of args */ - mov r3, sp /* Start of args */ + add r2, sp, r0, LSL #2 /* End of args. */ + mov r3, sp /* Start of args. */ .LC13: cmp r2, r3 - ldrhi r4,[r2, #-4] /* Reverse ends of list */ + ldrhi r4,[r2, #-4] /* Reverse ends of list. */ ldrhi r5, [r3] strhi r5, [r2, #-4]! strhi r4, [r3], #4 @@ -431,7 +434,6 @@ __change_mode: #if __thumb__ && !defined(PREFER_THUMB) /* Come out of Thumb mode. This code should be redundant. */ - mov a4, pc bx a4 @@ -447,7 +449,6 @@ change_back: /* For Thumb, constants must be after the code since only positive offsets are supported for PC relative addresses. */ - .align 0 .LC0: #ifdef ARM_RDI_MONITOR @@ -457,13 +458,13 @@ change_back: /* Changes by toralf: Provide alternative "stack" variable whose value may be defined externally; .Lstack will be used instead of .LC0 if it points to a non-0 value. Also set up references to "hooks" that - may be used by the application to provide additional init code. */ - + may be used by the application to provide additional init code. */ #ifdef __pe__ .word 0x800000 #else .word 0x80000 /* Top of RAM on the PIE board. */ #endif + .Lstack: .word __stack .Lhwinit: @@ -476,7 +477,7 @@ change_back: runtime (meaning "ignore setting") for the variables, when the user does not provide the symbols. (The linker uses a weak symbol if, and only if, a normal version of the same symbol isn't provided - e.g. by a linker script or another object file.) */ + e.g. by a linker script or another object file.) */ .weak __stack .weak FUNCTION (hardware_init_hook) diff --git a/newlib/libc/sys/arm/crt0.S b/newlib/libc/sys/arm/crt0.S index 8c9f7be38..7a6b40d9a 100644 --- a/newlib/libc/sys/arm/crt0.S +++ b/newlib/libc/sys/arm/crt0.S @@ -50,13 +50,13 @@ .global \name .thumb_func \name: -.endm +.endm #else .code 32 .macro FUNC_START name - .global \name + .global \name \name: -.endm +.endm #endif .macro indirect_call reg @@ -68,8 +68,10 @@ #endif .endm +/******************************************************************************* +* Main library startup code. +*******************************************************************************/ .align 0 - FUNC_START _mainCRTStartup FUNC_START _start #if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__) @@ -399,7 +401,7 @@ __change_mode: bl FUNCTION (_init) movs r0, r4 movs r1, r5 -#endif +#endif bl FUNCTION (main) bl FUNCTION (exit) /* Should not return. */ @@ -420,7 +422,7 @@ change_back: #endif /* For Thumb, constants must be after the code since only - positive offsets are supported for PC relative addresses. */ + positive offsets are supported for PC relative addresses. */ .align 0 .LC0: #ifdef ARM_RDI_MONITOR @@ -430,7 +432,7 @@ change_back: /* Changes by toralf: Provide alternative "stack" variable whose value may be defined externally; .Lstack will be used instead of .LC0 if it points to a non-0 value. Also set up references to "hooks" that - may be used by the application to provide additional init code. */ + may be used by the application to provide additional init code. */ #ifdef __pe__ .word 0x800000 #else @@ -449,7 +451,7 @@ change_back: runtime (meaning "ignore setting") for the variables, when the user does not provide the symbols. (The linker uses a weak symbol if, and only if, a normal version of the same symbol isn't provided - e.g. by a linker script or another object file). */ + e.g. by a linker script or another object file.) */ .weak __stack .weak FUNCTION (hardware_init_hook) -- 2.20.1.windows.1 On Fri, Apr 12, 2019 at 11:57 AM Alexander Fedotov <[email protected]> wrote: > > Rebased patch to latest master. > > >Style rules say that the full stop goes inside the parenthesis if the > >entire sentence is parenthetical; otherwise it goes outside. So its > >technically the other version that is incorrect. > Fixed. > > OK to apply ? > If yes, please push it for me since I have no commit rights. > > From d58859f98ba5ef7f206c0967b093df2ca655e1fb Mon Sep 17 00:00:00 2001 > From: Alexander Fedotov <[email protected]> > Date: Thu, 11 Apr 2019 15:28:05 +0300 > Subject: [PATCH 1/2] Align comments and spaces in libgloss/arm/crt0.S and > newlib/libc/sys/arm/crt0.S to ease further code alignment. > > --- > libgloss/arm/crt0.S | 131 ++++++++++++++++++------------------- > newlib/libc/sys/arm/crt0.S | 18 ++--- > 2 files changed, 75 insertions(+), 74 deletions(-) > > diff --git a/libgloss/arm/crt0.S b/libgloss/arm/crt0.S > index c708f63d8..d823706b4 100644 > --- a/libgloss/arm/crt0.S > +++ b/libgloss/arm/crt0.S > @@ -90,14 +90,14 @@ > #endif > #endif > > -/* Start by setting up a stack */ > +/* Start by setting up a stack. */ > #ifdef ARM_RDP_MONITOR > - /* Issue Demon SWI to read stack info */ > - swi SWI_GetEnv /* Returns command line in r0 */ > - mov sp,r1 /* and the highest memory address in r1 */ > + /* Issue Demon SWI to read stack info. */ > + swi SWI_GetEnv /* Returns command line in r0. */ > + mov sp,r1 /* and the highest memory address in r1. */ > > - /* stack limit is at end of data */ > - /* allow slop for stack overflow handling and small frames */ > + /* Stack limit is at end of data. */ > + /* Allow slop for stack overflow handling and small frames. */ > #ifdef THUMB1_ONLY > ldr r0, .LC2 > adds r0, #128 > @@ -109,19 +109,19 @@ > #endif > #else > #ifdef ARM_RDI_MONITOR > - /* Issue Angel SWI to read stack info */ > + /* Issue Angel SWI to read stack info. */ > movs r0, #AngelSWI_Reason_HeapInfo > - adr r1, .LC0 /* point at ptr to 4 words to receive data */ > + adr r1, .LC0 /* Point at ptr to 4 words to receive data. */ > #ifdef THUMB_VXM > bkpt AngelSWI > #elif defined(__thumb2__) > - /* We are in thumb mode for startup on armv7 architectures. */ > + /* We are in thumb mode for startup on armv7 architectures. */ > AngelSWIAsm (AngelSWI) > #else > - /* We are always in ARM mode for startup on pre armv7 archs. */ > + /* We are always in ARM mode for startup on pre armv7 archs. */ > AngelSWIAsm (AngelSWI_ARM) > #endif > - ldr r0, .LC0 /* point at values read */ > + ldr r0, .LC0 /* Point at values read. */ > > /* Set __heap_limit. */ > ldr r1, [r0, #4] > @@ -148,14 +148,15 @@ > to skip setting sp/sl to 0 here. > - Considering M-profile processors, We might want to initialize > sp by the first entry of vector table and return 0 to SYS_HEAPINFO > - semihosting call, which will be skipped here. */ > + semihosting call, which will be skipped here. */ > cmp r1, #0 > beq .LC26 > mov sp, r1 > .LC26: > cmp r2, #0 > beq .LC27 > - /* allow slop for stack overflow handling and small frames */ > + > + /* Allow slop for stack overflow handling and small frames. */ > #ifdef THUMB1_ONLY > adds r2, #128 > adds r2, #128 > @@ -163,9 +164,10 @@ > #else > add sl, r2, #256 > #endif > + > .LC27: > #else > - /* Set up the stack pointer to a fixed value */ > + /* Set up the stack pointer to a fixed value. */ > /* Changes by toralf: > - Allow linker script to provide stack via __stack symbol - see > defintion of .Lstack > @@ -175,7 +177,7 @@ > Loosely based on init.s from ARM/Motorola example code. > Note: Mode switch via CPSR is not allowed once in non-privileged > mode, so we take care not to enter "User" to set up its sp, > - and also skip most operations if already in that mode. */ > + and also skip most operations if already in that mode. */ > > ldr r3, .Lstack > cmp r3, #0 > @@ -192,42 +194,42 @@ > /* Note: This 'mov' is essential when starting in User, and ensures we > always get *some* sp value for the initial mode, even if we > have somehow missed it below (in which case it gets the same > - value as FIQ - not ideal, but better than nothing.) */ > + value as FIQ - not ideal, but better than nothing). */ > mov sp, r3 > #ifdef PREFER_THUMB > /* XXX Fill in stack assignments for interrupt modes. */ > #else > mrs r2, CPSR > - tst r2, #0x0F /* Test mode bits - in User of all are 0 */ > - beq .LC23 /* "eq" means r2 AND #0x0F is 0 */ > - msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled */ > + tst r2, #0x0F /* Test mode bits - in User of all are 0. */ > + beq .LC23 /* "eq" means r2 AND #0x0F is 0. */ > + msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled. */ > mov sp, r3 > - sub sl, sp, #0x1000 /* This mode also has its own sl (see below) */ > + sub sl, sp, #0x1000 /* This mode also has its own sl (see below). */ > > mov r3, sl > - msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled */ > + msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled. */ > mov sp, r3 > sub r3, r3, #0x1000 > > - msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled */ > + msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled. */ > mov sp, r3 > sub r3, r3, #0x1000 > > - msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled */ > + msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled. */ > mov sp, r3 > sub r3, r3, #0x2000 > > - msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled */ > + msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled. */ > > mov sp, r3 > - sub r3, r3, #0x8000 /* Min size 32k */ > - bic r3, r3, #0x00FF /* Align with current 64k block */ > + sub r3, r3, #0x8000 /* Min size 32k. */ > + bic r3, r3, #0x00FF /* Align with current 64k block. */ > bic r3, r3, #0xFF00 > > str r3, [r3, #-4] /* Move value into user mode sp without */ > - ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm */ > + ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm. */ > orr r2, r2, #0xC0 /* Back to original mode, presumably SVC, */ > - msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1 */ > + msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1. */ > #endif > .LC23: > /* Setup a default stack-limit in-case the code has been > @@ -243,24 +245,24 @@ > subs r2, r3, r2 > mov sl, r2 > #else > - sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl */ > + sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl. */ > #endif > #endif > #endif > /* Zero the memory in the .bss section. */ > - movs a2, #0 /* Second arg: fill value */ > - mov fp, a2 /* Null frame pointer */ > - mov r7, a2 /* Null frame pointer for Thumb */ > + movs a2, #0 /* Second arg: fill value. */ > + mov fp, a2 /* Null frame pointer. */ > + mov r7, a2 /* Null frame pointer for Thumb. */ > > - ldr a1, .LC1 /* First arg: start of memory block */ > + ldr a1, .LC1 /* First arg: start of memory block. */ > ldr a3, .LC2 > - subs a3, a3, a1 /* Third arg: length of block */ > + subs a3, a3, a1 /* Third arg: length of block. */ > > > #if __thumb__ && !defined(PREFER_THUMB) > - /* Enter Thumb mode.... */ > - add a4, pc, #1 /* Get the address of the Thumb block */ > - bx a4 /* Go there and start Thumb decoding */ > + /* Enter Thumb mode... */ > + add a4, pc, #1 /* Get the address of the Thumb block. */ > + bx a4 /* Go there and start Thumb decoding. */ > > .code 16 > .global __change_mode > @@ -271,9 +273,8 @@ __change_mode: > bl FUNCTION (memset) > #if !defined (ARM_RDP_MONITOR) && !defined (ARM_RDI_MONITOR) > /* Changes by toralf: Taken from libgloss/m68k/crt0.S > - * initialize target specific stuff. Only execute these > - * functions it they exist. > - */ > + initialize target specific stuff. Only execute these > + functions it they exist. */ > ldr r3, .Lhwinit > cmp r3, #0 > beq .LC24 > @@ -285,24 +286,24 @@ __change_mode: > indirect_call r3 > > .LC25: > - movs r0, #0 /* no arguments */ > - movs r1, #0 /* no argv either */ > + movs r0, #0 /* No arguments. */ > + movs r1, #0 /* No argv either. */ > #else > - /* Need to set up standard file handles */ > + /* Need to set up standard file handles. */ > bl FUNCTION (initialise_monitor_handles) > > #ifdef ARM_RDP_MONITOR > - swi SWI_GetEnv /* sets r0 to point to the command line */ > + swi SWI_GetEnv /* Sets r0 to point to the command line. */ > movs r1, r0 > #else > movs r0, #AngelSWI_Reason_GetCmdLine > - ldr r1, .LC30 /* Space for command line */ > + ldr r1, .LC30 /* Space for command line. */ > AngelSWIAsm (AngelSWI) > ldr r1, .LC30 > ldr r1, [r1] > #endif > - /* Parse string at r1 */ > - movs r0, #0 /* count of arguments so far */ > + /* Parse string at r1. */ > + movs r0, #0 /* Count of arguments so far. */ > /* Push a NULL argument onto the end of the list. */ > #ifdef __thumb__ > push {r0} > @@ -310,7 +311,7 @@ __change_mode: > stmfd sp!, {r0} > #endif > .LC10: > -/* Skip leading blanks */ > +/* Skip leading blanks. */ > #ifdef __thumb__ > ldrb r3, [r1] > adds r1, #1 > @@ -322,7 +323,7 @@ __change_mode: > cmp r3, #' ' > beq .LC10 > > -/* See whether we are scanning a string */ > +/* See whether we are scanning a string. */ > cmp r3, #'"' > #ifdef __thumb__ > beq .LC20 > @@ -333,17 +334,17 @@ __change_mode: > b .LC22 > > .LC21: > - movs r2, #' ' /* terminator type */ > - subs r1, r1, #1 /* adjust back to point at start char */ > + movs r2, #' ' /* Terminator type. */ > + subs r1, r1, #1 /* Adjust back to point at start char. */ > .LC22: > #else > cmpne r3, #'\'' > moveq r2, r3 > - movne r2, #' ' /* terminator type */ > - subne r1, r1, #1 /* adjust back to point at start char */ > + movne r2, #' ' /* Terminator type. */ > + subne r1, r1, #1 /* Adjust back to point at start char. */ > #endif > > -/* Stack a pointer to the current argument */ > +/* Stack a pointer to the current argument. */ > #ifdef __thumb__ > push {r1} > #else > @@ -359,16 +360,16 @@ __change_mode: > #endif > cmp r3, #0 > beq .LC12 > - cmp r2, r3 /* reached terminator? */ > + cmp r2, r3 /* Reached terminator ? */ > bne .LC11 > movs r2, #0 > subs r3, r1, #1 > - strb r2, [r3] /* terminate the arg string */ > + strb r2, [r3] /* Terminate the arg string. */ > b .LC10 > > .LC12: > - mov r1, sp /* point at stacked arg pointers */ > - /* We've now got the stacked args in order reverse the */ > + mov r1, sp /* Point at stacked arg pointers. */ > + /* We've now got the stacked args in order, reverse them. */ > #ifdef __thumb__ > movs r2, r0 > lsls r2, #2 > @@ -390,10 +391,10 @@ __change_mode: > bics r4, r5 > mov sp, r4 > #else > - add r2, sp, r0, LSL #2 /* End of args */ > - mov r3, sp /* Start of args */ > + add r2, sp, r0, LSL #2 /* End of args. */ > + mov r3, sp /* Start of args. */ > .LC13: cmp r2, r3 > - ldrhi r4,[r2, #-4] /* Reverse ends of list */ > + ldrhi r4,[r2, #-4] /* Reverse ends of list. */ > ldrhi r5, [r3] > strhi r5, [r2, #-4]! > strhi r4, [r3], #4 > @@ -431,7 +432,6 @@ __change_mode: > > #if __thumb__ && !defined(PREFER_THUMB) > /* Come out of Thumb mode. This code should be redundant. */ > - > mov a4, pc > bx a4 > > @@ -447,7 +447,6 @@ change_back: > > /* For Thumb, constants must be after the code since only > positive offsets are supported for PC relative addresses. */ > - > .align 0 > .LC0: > #ifdef ARM_RDI_MONITOR > @@ -457,13 +456,13 @@ change_back: > /* Changes by toralf: Provide alternative "stack" variable whose value > may be defined externally; .Lstack will be used instead of .LC0 if > it points to a non-0 value. Also set up references to "hooks" that > - may be used by the application to provide additional init code. */ > - > + may be used by the application to provide additional init code. */ > #ifdef __pe__ > .word 0x800000 > #else > .word 0x80000 /* Top of RAM on the PIE board. */ > #endif > + > .Lstack: > .word __stack > .Lhwinit: > @@ -476,7 +475,7 @@ change_back: > runtime (meaning "ignore setting") for the variables, when the user > does not provide the symbols. (The linker uses a weak symbol if, > and only if, a normal version of the same symbol isn't provided > - e.g. by a linker script or another object file.) */ > + e.g. by a linker script or another object file.) */ > > .weak __stack > .weak FUNCTION (hardware_init_hook) > diff --git a/newlib/libc/sys/arm/crt0.S b/newlib/libc/sys/arm/crt0.S > index 8c9f7be38..7a6b40d9a 100644 > --- a/newlib/libc/sys/arm/crt0.S > +++ b/newlib/libc/sys/arm/crt0.S > @@ -50,13 +50,13 @@ > .global \name > .thumb_func > \name: > -.endm > +.endm > #else > .code 32 > .macro FUNC_START name > - .global \name > + .global \name > \name: > -.endm > +.endm > #endif > > .macro indirect_call reg > @@ -68,8 +68,10 @@ > #endif > .endm > > +/******************************************************************************* > +* Main library startup code. > +*******************************************************************************/ > .align 0 > - > FUNC_START _mainCRTStartup > FUNC_START _start > #if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__) > @@ -399,7 +401,7 @@ __change_mode: > bl FUNCTION (_init) > movs r0, r4 > movs r1, r5 > -#endif > +#endif > bl FUNCTION (main) > > bl FUNCTION (exit) /* Should not return. */ > @@ -420,7 +422,7 @@ change_back: > #endif > > /* For Thumb, constants must be after the code since only > - positive offsets are supported for PC relative addresses. */ > + positive offsets are supported for PC relative addresses. */ > .align 0 > .LC0: > #ifdef ARM_RDI_MONITOR > @@ -430,7 +432,7 @@ change_back: > /* Changes by toralf: Provide alternative "stack" variable whose value > may be defined externally; .Lstack will be used instead of .LC0 if > it points to a non-0 value. Also set up references to "hooks" that > - may be used by the application to provide additional init > code. */ > + may be used by the application to provide additional init code. */ > #ifdef __pe__ > .word 0x800000 > #else > @@ -449,7 +451,7 @@ change_back: > runtime (meaning "ignore setting") for the variables, when the user > does not provide the symbols. (The linker uses a weak symbol if, > and only if, a normal version of the same symbol isn't provided > - e.g. by a linker script or another object file). */ > + e.g. by a linker script or another object file.) */ > > .weak __stack > .weak FUNCTION (hardware_init_hook) > -- > 2.20.1.windows.1 > > > On Thu, Apr 11, 2019 at 4:37 PM Alexander Fedotov <[email protected]> wrote: > > > > >Style rules say that the full stop goes inside the parenthesis if the > > >entire sentence is parenthetical; otherwise it goes outside. So its > > >technically the other version that is incorrect. > > > > Well I just wanted to have the same style in both sources :) > > I have a new patch for SP&SL refactor that is based on this one. > > > > >Do you have commit rights? > > Unfortunately no > > > > Alex > > > > On Thu, Apr 11, 2019 at 4:33 PM Richard Earnshaw (lists) > > <[email protected]> wrote: > > > > > > On 11/04/2019 13:58, Alexander Fedotov wrote: > > > > Sorry. I have missed some lines in previous patch. Here is new one below. > > > > > > > > From 68d7a9bb5f11ddc3c0420560c718b6a2f8041896 Mon Sep 17 00:00:00 2001 > > > > From: Alexander Fedotov <[email protected]> > > > > Date: Thu, 11 Apr 2019 15:28:05 +0300 > > > > Subject: [PATCH] Align comments and spaces in libgloss/arm/crt0.S and > > > > newlib/libc/sys/arm/crt0.S to ease further code alignment. > > > > > > > > --- > > > > libgloss/arm/crt0.S | 131 ++++++++++++++++++------------------- > > > > newlib/libc/sys/arm/crt0.S | 12 ++-- > > > > 2 files changed, 71 insertions(+), 72 deletions(-) > > > > > > > > diff --git a/libgloss/arm/crt0.S b/libgloss/arm/crt0.S > > > > index c708f63d8..e5c813e3b 100644 > > > > --- a/libgloss/arm/crt0.S > > > > +++ b/libgloss/arm/crt0.S > > > > @@ -90,14 +90,14 @@ > > > > #endif > > > > #endif > > > > > > > > -/* Start by setting up a stack */ > > > > +/* Start by setting up a stack. */ > > > > #ifdef ARM_RDP_MONITOR > > > > - /* Issue Demon SWI to read stack info */ > > > > - swi SWI_GetEnv /* Returns command line in r0 */ > > > > - mov sp,r1 /* and the highest memory address in r1 */ > > > > + /* Issue Demon SWI to read stack info. */ > > > > + swi SWI_GetEnv /* Returns command line in r0. */ > > > > + mov sp,r1 /* and the highest memory address in r1. */ > > > > > > > > - /* stack limit is at end of data */ > > > > - /* allow slop for stack overflow handling and small frames */ > > > > + /* Stack limit is at end of data. */ > > > > + /* Allow slop for stack overflow handling and small frames. */ > > > > #ifdef THUMB1_ONLY > > > > ldr r0, .LC2 > > > > adds r0, #128 > > > > @@ -109,19 +109,19 @@ > > > > #endif > > > > #else > > > > #ifdef ARM_RDI_MONITOR > > > > - /* Issue Angel SWI to read stack info */ > > > > + /* Issue Angel SWI to read stack info. */ > > > > movs r0, #AngelSWI_Reason_HeapInfo > > > > - adr r1, .LC0 /* point at ptr to 4 words to receive data */ > > > > + adr r1, .LC0 /* Point at ptr to 4 words to receive data. */ > > > > #ifdef THUMB_VXM > > > > bkpt AngelSWI > > > > #elif defined(__thumb2__) > > > > - /* We are in thumb mode for startup on armv7 architectures. */ > > > > + /* We are in thumb mode for startup on armv7 architectures. */ > > > > AngelSWIAsm (AngelSWI) > > > > #else > > > > - /* We are always in ARM mode for startup on pre armv7 archs. */ > > > > + /* We are always in ARM mode for startup on pre armv7 archs. */ > > > > AngelSWIAsm (AngelSWI_ARM) > > > > #endif > > > > - ldr r0, .LC0 /* point at values read */ > > > > + ldr r0, .LC0 /* Point at values read. */ > > > > > > > > /* Set __heap_limit. */ > > > > ldr r1, [r0, #4] > > > > @@ -148,14 +148,15 @@ > > > > to skip setting sp/sl to 0 here. > > > > - Considering M-profile processors, We might want to initialize > > > > sp by the first entry of vector table and return 0 to SYS_HEAPINFO > > > > - semihosting call, which will be skipped here. */ > > > > + semihosting call, which will be skipped here. */ > > > > cmp r1, #0 > > > > beq .LC26 > > > > mov sp, r1 > > > > .LC26: > > > > cmp r2, #0 > > > > beq .LC27 > > > > - /* allow slop for stack overflow handling and small frames */ > > > > + > > > > + /* Allow slop for stack overflow handling and small frames. */ > > > > #ifdef THUMB1_ONLY > > > > adds r2, #128 > > > > adds r2, #128 > > > > @@ -163,9 +164,10 @@ > > > > #else > > > > add sl, r2, #256 > > > > #endif > > > > + > > > > .LC27: > > > > #else > > > > - /* Set up the stack pointer to a fixed value */ > > > > + /* Set up the stack pointer to a fixed value. */ > > > > /* Changes by toralf: > > > > - Allow linker script to provide stack via __stack symbol - see > > > > defintion of .Lstack > > > > @@ -175,7 +177,7 @@ > > > > Loosely based on init.s from ARM/Motorola example code. > > > > Note: Mode switch via CPSR is not allowed once in non-privileged > > > > mode, so we take care not to enter "User" to set up its sp, > > > > - and also skip most operations if already in that mode. */ > > > > + and also skip most operations if already in that mode. */ > > > > > > > > ldr r3, .Lstack > > > > cmp r3, #0 > > > > @@ -192,42 +194,42 @@ > > > > /* Note: This 'mov' is essential when starting in User, and ensures we > > > > always get *some* sp value for the initial mode, even if we > > > > have somehow missed it below (in which case it gets the same > > > > - value as FIQ - not ideal, but better than nothing.) */ > > > > + value as FIQ - not ideal, but better than nothing). */ > > > > mov sp, r3 > > > > #ifdef PREFER_THUMB > > > > /* XXX Fill in stack assignments for interrupt modes. */ > > > > #else > > > > mrs r2, CPSR > > > > - tst r2, #0x0F /* Test mode bits - in User of all are 0 */ > > > > - beq .LC23 /* "eq" means r2 AND #0x0F is 0 */ > > > > - msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled */ > > > > + tst r2, #0x0F /* Test mode bits - in User of all are 0. */ > > > > + beq .LC23 /* "eq" means r2 AND #0x0F is 0. */ > > > > + msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled. */ > > > > mov sp, r3 > > > > - sub sl, sp, #0x1000 /* This mode also has its own sl (see below) */ > > > > + sub sl, sp, #0x1000 /* This mode also has its own sl (see below). */ > > > > > > > > mov r3, sl > > > > - msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled */ > > > > + msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled. */ > > > > mov sp, r3 > > > > sub r3, r3, #0x1000 > > > > > > > > - msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled */ > > > > + msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled. */ > > > > mov sp, r3 > > > > sub r3, r3, #0x1000 > > > > > > > > - msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled */ > > > > + msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled. */ > > > > mov sp, r3 > > > > sub r3, r3, #0x2000 > > > > > > > > - msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled */ > > > > + msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled. */ > > > > > > > > mov sp, r3 > > > > - sub r3, r3, #0x8000 /* Min size 32k */ > > > > - bic r3, r3, #0x00FF /* Align with current 64k block */ > > > > + sub r3, r3, #0x8000 /* Min size 32k. */ > > > > + bic r3, r3, #0x00FF /* Align with current 64k block. */ > > > > bic r3, r3, #0xFF00 > > > > > > > > str r3, [r3, #-4] /* Move value into user mode sp without */ > > > > - ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm */ > > > > + ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm. */ > > > > orr r2, r2, #0xC0 /* Back to original mode, presumably SVC, */ > > > > - msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1 */ > > > > + msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1. */ > > > > #endif > > > > .LC23: > > > > /* Setup a default stack-limit in-case the code has been > > > > @@ -243,24 +245,24 @@ > > > > subs r2, r3, r2 > > > > mov sl, r2 > > > > #else > > > > - sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl */ > > > > + sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl. */ > > > > #endif > > > > #endif > > > > #endif > > > > /* Zero the memory in the .bss section. */ > > > > - movs a2, #0 /* Second arg: fill value */ > > > > - mov fp, a2 /* Null frame pointer */ > > > > - mov r7, a2 /* Null frame pointer for Thumb */ > > > > + movs a2, #0 /* Second arg: fill value. */ > > > > + mov fp, a2 /* Null frame pointer. */ > > > > + mov r7, a2 /* Null frame pointer for Thumb. */ > > > > > > > > - ldr a1, .LC1 /* First arg: start of memory block */ > > > > + ldr a1, .LC1 /* First arg: start of memory block. */ > > > > ldr a3, .LC2 > > > > - subs a3, a3, a1 /* Third arg: length of block */ > > > > + subs a3, a3, a1 /* Third arg: length of block. */ > > > > > > > > > > > > #if __thumb__ && !defined(PREFER_THUMB) > > > > - /* Enter Thumb mode.... */ > > > > - add a4, pc, #1 /* Get the address of the Thumb block */ > > > > - bx a4 /* Go there and start Thumb decoding */ > > > > + /* Enter Thumb mode... */ > > > > + add a4, pc, #1 /* Get the address of the Thumb block. */ > > > > + bx a4 /* Go there and start Thumb decoding. */ > > > > > > > > .code 16 > > > > .global __change_mode > > > > @@ -271,9 +273,8 @@ __change_mode: > > > > bl FUNCTION (memset) > > > > #if !defined (ARM_RDP_MONITOR) && !defined (ARM_RDI_MONITOR) > > > > /* Changes by toralf: Taken from libgloss/m68k/crt0.S > > > > - * initialize target specific stuff. Only execute these > > > > - * functions it they exist. > > > > - */ > > > > + initialize target specific stuff. Only execute these > > > > + functions it they exist. */ > > > > ldr r3, .Lhwinit > > > > cmp r3, #0 > > > > beq .LC24 > > > > @@ -285,24 +286,24 @@ __change_mode: > > > > indirect_call r3 > > > > > > > > .LC25: > > > > - movs r0, #0 /* no arguments */ > > > > - movs r1, #0 /* no argv either */ > > > > + movs r0, #0 /* No arguments. */ > > > > + movs r1, #0 /* No argv either. */ > > > > #else > > > > - /* Need to set up standard file handles */ > > > > + /* Need to set up standard file handles. */ > > > > bl FUNCTION (initialise_monitor_handles) > > > > > > > > #ifdef ARM_RDP_MONITOR > > > > - swi SWI_GetEnv /* sets r0 to point to the command line */ > > > > + swi SWI_GetEnv /* Sets r0 to point to the command line. */ > > > > movs r1, r0 > > > > #else > > > > movs r0, #AngelSWI_Reason_GetCmdLine > > > > - ldr r1, .LC30 /* Space for command line */ > > > > + ldr r1, .LC30 /* Space for command line. */ > > > > AngelSWIAsm (AngelSWI) > > > > ldr r1, .LC30 > > > > ldr r1, [r1] > > > > #endif > > > > - /* Parse string at r1 */ > > > > - movs r0, #0 /* count of arguments so far */ > > > > + /* Parse string at r1. */ > > > > + movs r0, #0 /* Count of arguments so far. */ > > > > /* Push a NULL argument onto the end of the list. */ > > > > #ifdef __thumb__ > > > > push {r0} > > > > @@ -310,7 +311,7 @@ __change_mode: > > > > stmfd sp!, {r0} > > > > #endif > > > > .LC10: > > > > -/* Skip leading blanks */ > > > > +/* Skip leading blanks. */ > > > > #ifdef __thumb__ > > > > ldrb r3, [r1] > > > > adds r1, #1 > > > > @@ -322,7 +323,7 @@ __change_mode: > > > > cmp r3, #' ' > > > > beq .LC10 > > > > > > > > -/* See whether we are scanning a string */ > > > > +/* See whether we are scanning a string. */ > > > > cmp r3, #'"' > > > > #ifdef __thumb__ > > > > beq .LC20 > > > > @@ -333,17 +334,17 @@ __change_mode: > > > > b .LC22 > > > > > > > > .LC21: > > > > - movs r2, #' ' /* terminator type */ > > > > - subs r1, r1, #1 /* adjust back to point at start char */ > > > > + movs r2, #' ' /* Terminator type. */ > > > > + subs r1, r1, #1 /* Adjust back to point at start char. */ > > > > .LC22: > > > > #else > > > > cmpne r3, #'\'' > > > > moveq r2, r3 > > > > - movne r2, #' ' /* terminator type */ > > > > - subne r1, r1, #1 /* adjust back to point at start char */ > > > > + movne r2, #' ' /* Terminator type. */ > > > > + subne r1, r1, #1 /* Adjust back to point at start char. */ > > > > #endif > > > > > > > > -/* Stack a pointer to the current argument */ > > > > +/* Stack a pointer to the current argument. */ > > > > #ifdef __thumb__ > > > > push {r1} > > > > #else > > > > @@ -359,16 +360,16 @@ __change_mode: > > > > #endif > > > > cmp r3, #0 > > > > beq .LC12 > > > > - cmp r2, r3 /* reached terminator? */ > > > > + cmp r2, r3 /* Reached terminator ? */ > > > > bne .LC11 > > > > movs r2, #0 > > > > subs r3, r1, #1 > > > > - strb r2, [r3] /* terminate the arg string */ > > > > + strb r2, [r3] /* Terminate the arg string. */ > > > > b .LC10 > > > > > > > > .LC12: > > > > - mov r1, sp /* point at stacked arg pointers */ > > > > - /* We've now got the stacked args in order reverse the */ > > > > + mov r1, sp /* Point at stacked arg pointers. */ > > > > + /* We've now got the stacked args in order, reverse them. */ > > > > #ifdef __thumb__ > > > > movs r2, r0 > > > > lsls r2, #2 > > > > @@ -390,10 +391,10 @@ __change_mode: > > > > bics r4, r5 > > > > mov sp, r4 > > > > #else > > > > - add r2, sp, r0, LSL #2 /* End of args */ > > > > - mov r3, sp /* Start of args */ > > > > + add r2, sp, r0, LSL #2 /* End of args. */ > > > > + mov r3, sp /* Start of args. */ > > > > .LC13: cmp r2, r3 > > > > - ldrhi r4,[r2, #-4] /* Reverse ends of list */ > > > > + ldrhi r4,[r2, #-4] /* Reverse ends of list. */ > > > > ldrhi r5, [r3] > > > > strhi r5, [r2, #-4]! > > > > strhi r4, [r3], #4 > > > > @@ -431,7 +432,6 @@ __change_mode: > > > > > > > > #if __thumb__ && !defined(PREFER_THUMB) > > > > /* Come out of Thumb mode. This code should be redundant. */ > > > > - > > > > mov a4, pc > > > > bx a4 > > > > > > > > @@ -447,7 +447,6 @@ change_back: > > > > > > > > /* For Thumb, constants must be after the code since only > > > > positive offsets are supported for PC relative addresses. */ > > > > - > > > > .align 0 > > > > .LC0: > > > > #ifdef ARM_RDI_MONITOR > > > > @@ -457,13 +456,13 @@ change_back: > > > > /* Changes by toralf: Provide alternative "stack" variable whose value > > > > may be defined externally; .Lstack will be used instead of .LC0 if > > > > it points to a non-0 value. Also set up references to "hooks" that > > > > - may be used by the application to provide additional init code. */ > > > > - > > > > + may be used by the application to provide additional init code. */ > > > > #ifdef __pe__ > > > > .word 0x800000 > > > > #else > > > > .word 0x80000 /* Top of RAM on the PIE board. */ > > > > #endif > > > > + > > > > .Lstack: > > > > .word __stack > > > > .Lhwinit: > > > > @@ -476,7 +475,7 @@ change_back: > > > > runtime (meaning "ignore setting") for the variables, when the user > > > > does not provide the symbols. (The linker uses a weak symbol if, > > > > and only if, a normal version of the same symbol isn't provided > > > > - e.g. by a linker script or another object file.) */ > > > > + e.g. by a linker script or another object file). */ > > > > > > Style rules say that the full stop goes inside the parenthesis if the > > > entire sentence is parenthetical; otherwise it goes outside. So its > > > technically the other version that is incorrect. > > > > > > > > > > > .weak __stack > > > > .weak FUNCTION (hardware_init_hook) > > > > diff --git a/newlib/libc/sys/arm/crt0.S b/newlib/libc/sys/arm/crt0.S > > > > index 64d425900..602148969 100644 > > > > --- a/newlib/libc/sys/arm/crt0.S > > > > +++ b/newlib/libc/sys/arm/crt0.S > > > > @@ -50,13 +50,13 @@ > > > > .global \name > > > > .thumb_func > > > > \name: > > > > -.endm > > > > +.endm > > > > #else > > > > .code 32 > > > > .macro FUNC_START name > > > > - .global \name > > > > + .global \name > > > > \name: > > > > -.endm > > > > +.endm > > > > #endif > > > > > > > > .macro indirect_call reg > > > > @@ -399,7 +399,7 @@ __change_mode: > > > > bl FUNCTION (_init) > > > > movs r0, r4 > > > > movs r1, r5 > > > > -#endif > > > > +#endif > > > > bl FUNCTION (main) > > > > > > > > bl FUNCTION (exit) /* Should not return. */ > > > > @@ -420,7 +420,7 @@ change_back: > > > > #endif > > > > > > > > /* For Thumb, constants must be after the code since only > > > > - positive offsets are supported for PC relative addresses. */ > > > > + positive offsets are supported for PC relative addresses. */ > > > > .align 0 > > > > .LC0: > > > > #ifdef ARM_RDI_MONITOR > > > > @@ -430,7 +430,7 @@ change_back: > > > > /* Changes by toralf: Provide alternative "stack" variable whose value > > > > may be defined externally; .Lstack will be used instead of .LC0 if > > > > it points to a non-0 value. Also set up references to "hooks" that > > > > - may be used by the application to provide additional init > > > > code. */ > > > > + may be used by the application to provide additional init code. */ > > > > #ifdef __pe__ > > > > .word 0x800000 > > > > #else > > > > > > > > > > Other than the comment above, this is fine. Thanks for doing this. > > > > > > Do you have commit rights? > > > > > > R.