[PATCH 1/2] newlib: update libtool macro name

Mike Frysinger <[email protected]>
Newsgroups gmane.comp.lib.newlib
Message-ID <[email protected]> 
Replace old AM_PROG_LIBTOOL name with LT_INIT.  There's no change to
the generated files since they're aliases internally.
---
 newlib/configure.ac                                         | 2 +-
 newlib/iconvdata/configure.ac                               | 2 +-
 newlib/libc/configure.ac                                    | 2 +-
 newlib/libc/machine/configure.ac                            | 6 +++---
 newlib/libc/machine/i386/configure.ac                       | 6 +++---
 newlib/libc/sys/configure.ac                                | 2 +-
 newlib/libc/sys/linux/configure.ac                          | 2 +-
 newlib/libc/sys/linux/linuxthreads/configure.ac             | 2 +-
 newlib/libc/sys/linux/linuxthreads/machine/configure.ac     | 2 +-
 .../libc/sys/linux/linuxthreads/machine/i386/configure.ac   | 2 +-
 newlib/libc/sys/linux/machine/configure.ac                  | 2 +-
 newlib/libc/sys/linux/machine/i386/configure.ac             | 2 +-
 newlib/libm/configure.ac                                    | 2 +-
 newlib/libm/machine/configure.ac                            | 6 +++---
 newlib/libm/machine/i386/configure.ac                       | 6 +++---
 newlib/libm/machine/x86_64/configure.ac                     | 6 +++---
 16 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/newlib/configure.ac b/newlib/configure.ac
index 6d89c3a328fe..a7fe598d61b5 100644
--- a/newlib/configure.ac
+++ b/newlib/configure.ac
@@ -279,7 +279,7 @@ _LT_PROG_ECHO_BACKSLASH
 AC_PROG_AWK
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 dnl The following is being disabled because the mathfp library is
diff --git a/newlib/iconvdata/configure.ac b/newlib/iconvdata/configure.ac
index 48112233c828..7840b2b6e45c 100644
--- a/newlib/iconvdata/configure.ac
+++ b/newlib/iconvdata/configure.ac
@@ -16,7 +16,7 @@ _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AC_CONFIG_FILES([Makefile])
diff --git a/newlib/libc/configure.ac b/newlib/libc/configure.ac
index 3ffc021863fa..764b0bc0faaf 100644
--- a/newlib/libc/configure.ac
+++ b/newlib/libc/configure.ac
@@ -56,7 +56,7 @@ _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AC_CONFIG_SUBDIRS(machine sys)
diff --git a/newlib/libc/machine/configure.ac b/newlib/libc/machine/configure.ac
index a1b70b024d0a..7d3b953b2d75 100644
--- a/newlib/libc/machine/configure.ac
+++ b/newlib/libc/machine/configure.ac
@@ -11,13 +11,13 @@ NEWLIB_CONFIGURE(../..)
 
 dnl We have to add the following lines because automake detects the
 dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This must be added after
-dnl the call to NEWLIB_CONFIGURE.
+dnl LT_INIT is being used.  This must be added after dnl the call to
+dnl NEWLIB_CONFIGURE.
 _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 if test -n "${machine_dir}"; then
diff --git a/newlib/libc/machine/i386/configure.ac b/newlib/libc/machine/i386/configure.ac
index 139d84c92a80..8ef174797fb4 100644
--- a/newlib/libc/machine/i386/configure.ac
+++ b/newlib/libc/machine/i386/configure.ac
@@ -11,13 +11,13 @@ NEWLIB_CONFIGURE(../../..)
 
 dnl We have to add the following lines because automake detects the
 dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This code must occur after
-dnl NEWLIB_CONFIGURE. 
+dnl LT_INIT is being used.  This must be added after dnl the call to
+dnl NEWLIB_CONFIGURE.
 _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AM_CONDITIONAL(MACH_ADD_SETJMP, test "x$mach_add_setjmp" = 'xtrue')
diff --git a/newlib/libc/sys/configure.ac b/newlib/libc/sys/configure.ac
index 3d803f778003..0e190c9c863e 100644
--- a/newlib/libc/sys/configure.ac
+++ b/newlib/libc/sys/configure.ac
@@ -16,7 +16,7 @@ _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 if test -n "${sys_dir}"; then
diff --git a/newlib/libc/sys/linux/configure.ac b/newlib/libc/sys/linux/configure.ac
index ccfa7a048689..eb6c345c2341 100644
--- a/newlib/libc/sys/linux/configure.ac
+++ b/newlib/libc/sys/linux/configure.ac
@@ -17,7 +17,7 @@ _LT_PROG_ECHO_BACKSLASH
 AC_PROG_AWK
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AC_CONFIG_SUBDIRS(machine)
diff --git a/newlib/libc/sys/linux/linuxthreads/configure.ac b/newlib/libc/sys/linux/linuxthreads/configure.ac
index 98ee10cfabe6..18849156077b 100644
--- a/newlib/libc/sys/linux/linuxthreads/configure.ac
+++ b/newlib/libc/sys/linux/linuxthreads/configure.ac
@@ -17,7 +17,7 @@ _LT_PROG_ECHO_BACKSLASH
 AC_PROG_AWK
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 if test -n "${machine_dir}"; then
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/configure.ac b/newlib/libc/sys/linux/linuxthreads/machine/configure.ac
index a635021f56a2..00258d6dd117 100644
--- a/newlib/libc/sys/linux/linuxthreads/machine/configure.ac
+++ b/newlib/libc/sys/linux/linuxthreads/machine/configure.ac
@@ -16,7 +16,7 @@ _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 if test -n "${machine_dir}"; then
diff --git a/newlib/libc/sys/linux/linuxthreads/machine/i386/configure.ac b/newlib/libc/sys/linux/linuxthreads/machine/i386/configure.ac
index aca13b7178f7..2b6ed54df968 100644
--- a/newlib/libc/sys/linux/linuxthreads/machine/i386/configure.ac
+++ b/newlib/libc/sys/linux/linuxthreads/machine/i386/configure.ac
@@ -17,7 +17,7 @@ _LT_PROG_ECHO_BACKSLASH
 AC_PROG_AWK
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AC_CONFIG_FILES([Makefile])
diff --git a/newlib/libc/sys/linux/machine/configure.ac b/newlib/libc/sys/linux/machine/configure.ac
index e9f3f9c2eb5b..04ccb9f93c47 100644
--- a/newlib/libc/sys/linux/machine/configure.ac
+++ b/newlib/libc/sys/linux/machine/configure.ac
@@ -16,7 +16,7 @@ _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 if test -n "${machine_dir}"; then
diff --git a/newlib/libc/sys/linux/machine/i386/configure.ac b/newlib/libc/sys/linux/machine/i386/configure.ac
index 93cf839fec33..ee4b7485fd02 100644
--- a/newlib/libc/sys/linux/machine/i386/configure.ac
+++ b/newlib/libc/sys/linux/machine/i386/configure.ac
@@ -17,7 +17,7 @@ _LT_PROG_ECHO_BACKSLASH
 AC_PROG_AWK
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AC_CONFIG_FILES([Makefile])
diff --git a/newlib/libm/configure.ac b/newlib/libm/configure.ac
index c1b4dbb382c3..25ca4c7e661c 100644
--- a/newlib/libm/configure.ac
+++ b/newlib/libm/configure.ac
@@ -45,7 +45,7 @@ _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AC_CONFIG_SUBDIRS(machine)
diff --git a/newlib/libm/machine/configure.ac b/newlib/libm/machine/configure.ac
index c0be11512c80..1060e8cb0994 100644
--- a/newlib/libm/machine/configure.ac
+++ b/newlib/libm/machine/configure.ac
@@ -11,13 +11,13 @@ NEWLIB_CONFIGURE(../..)
 
 dnl We have to add the following lines because automake detects the
 dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This must be added after
-dnl the call to NEWLIB_CONFIGURE.
+dnl LT_INIT is being used.  This must be added after dnl the call to
+dnl NEWLIB_CONFIGURE.
 _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 machlib=
diff --git a/newlib/libm/machine/i386/configure.ac b/newlib/libm/machine/i386/configure.ac
index fb899a458134..6b43f8096fc0 100644
--- a/newlib/libm/machine/i386/configure.ac
+++ b/newlib/libm/machine/i386/configure.ac
@@ -11,13 +11,13 @@ NEWLIB_CONFIGURE(../../..)
 
 dnl We have to add the following lines because automake detects the
 dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This code must occur after
-dnl NEWLIB_CONFIGURE. 
+dnl LT_INIT is being used.  This must be added after dnl the call to
+dnl NEWLIB_CONFIGURE.
 _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AC_CONFIG_FILES([Makefile])
diff --git a/newlib/libm/machine/x86_64/configure.ac b/newlib/libm/machine/x86_64/configure.ac
index 10dce187394a..f5885fddd62a 100644
--- a/newlib/libm/machine/x86_64/configure.ac
+++ b/newlib/libm/machine/x86_64/configure.ac
@@ -11,13 +11,13 @@ NEWLIB_CONFIGURE(../../..)
 
 dnl We have to add the following lines because automake detects the
 dnl references to libtool libraries from aclocal and tries to verify that
-dnl AM_PROG_LIBTOOL is being used.  This code must occur after
-dnl NEWLIB_CONFIGURE. 
+dnl LT_INIT is being used.  This must be added after dnl the call to
+dnl NEWLIB_CONFIGURE.
 _LT_DECL_SED
 _LT_PROG_ECHO_BACKSLASH
 if test "${use_libtool}" = "yes"; then
 AC_LIBTOOL_WIN32_DLL
-AM_PROG_LIBTOOL
+LT_INIT
 fi
 
 AC_CONFIG_FILES([Makefile])
-- 
2.33.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.