Re: SIP phone won't ring

Hi Solon

    You must install apache to use web gui. from the web gui, you must
enter the 2 phone numbers and configure those phones with these phone
numbers!

hope this help you.
                                          Serge.


>
> Message: 3
> Date: Sat, 18 Feb 2006 08:23:46 -0500
> From: "Solon Lee" <[email protected]>
> Subject: [Vocal] SIP phone won't ring
> To: <[email protected]>
> Message-ID: <002b01c6348e$8c430280$f105a8c0@SolonLee>
> Content-Type: text/plain;	charset="iso-8859-1"
>
> Hello,
>
>   I have installed Vocal via www.vovida.com in this Red Hat Linux system,
> and seems ok with everything loaded and installed. I can place soft
> phone calls between 2 terminals in the same Linux machine. But when I
> connected it to 2 real Cisco SIP phones, it doesn't work. I did -
>
> 1. Condifure these 2 phonesets pointing to this SIP proxy server.
> 2. Set IPs for these 2 phnoes. They are all in the same subnet 10.32.8.XX
> (2 phone sets and the server).
> 3. I used http://host IP/vocal to run the server configuration and entered
> usernames (phone numbers) for these
>    2 SIP phones. Phone call can not be placed (no ring or ringback).
>
> This server 10.32.8.73 for some reason can not ping these 2 phones
> (x.x.x.46 and x.x.x.56), but they can be ping from other PCs in the same
> subnet.. Any idea or clue what may have caused this, please advice,
> thanks.
>
> Solon
>


_______________________________________________
vocal mailing list
[email protected]
To unsubscribe, please go to http://www.vovida.org/mailman/listinfo/vocal