Issues with booting L4Linux

"Oliver Horst" <[email protected]>
Newsgroups gmane.comp.micro-kernel.l4.devel
Message-ID <[email protected]> 
Hi All,

I'm currently trying to setup a small test scenario where L4Linux runs in
parallel
with L4Android within Qemu. I managed to build and start L4Android and it
works fine.
However, I didn't succeeded with booting L4Linux, again the build process
worked out
flawlessly, but the boot process quits with the following message:

  vmlinuz | Invalid IO-Port access at pc = 005b9cec port=0x1f7
  vmlinuz | Page fault (non-resolved): pfa=1a8 pc=4947ad
  Die message: Trap: 14
  vmlinuz | panic: going to sleep forever, bye


I followed the diverse tutorials on the web and built Fiasco.OC, as well as
L4Re with
their default configurations. In case of L4Linux I tried the default
configurations
generated by the make targets 'x86-mp_vPCI_defconfig' and
'x86-native_defconfig', both
with the same result as above.

Please find attached my L4 startup files and the output log for the
x86-mp_vPCI_defconfig
variant. My Qemu execution command looks like the following:

  $ qemu -cdrom images/l4linux-x86.iso -boot d -m 512 -serial stdio
-enable-kvm


Do you have any suggestions how to solve this issue?

Best Regards
Oliver

_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
x86-l4linux.cfg (application/octet-stream, 1.6 KB) - not displayed
x86-l4linux.io (application/octet-stream, 416 B) - not displayed
log.txt (text/plain, 14.2 KB) 
L4 Bootstrapper
  Build: #1 Thu Mar 22 16:55:15 CET 2012, x86-32, 4.4.5
  RAM: 0000000000000000 - 000000000009f3ff: 637kB
  RAM: 0000000000100000 - 000000001fffcfff: 523252kB
  Total RAM: 511MB
  Moving 14 modules to 1100000 with offset fd1000
  moving module 14 { 1a8c000-1d8c000 } -> { 2a5d000-2d5d000 }
  moving module 13 { 15ae000-1a8bcef } -> { 257f000-2a5ccef }
  moving module 12 { 147c000-15adebf } -> { 244d000-257eebf }
  moving module 11 { 1158000-147bfd0 } -> { 2129000-244cfd0 }
  moving module 10 { ff6000-1157404 } -> { 1fc7000-2128404 }
  moving module 09 { dfc000-ff57e9 } -> { 1dcd000-1fc67e9 }
  moving module 08 { 593000-dfb66d } -> { 1564000-1dcc66d }
  moving module 07 { 4a5000-592ee4 } -> { 1476000-1563ee4 }
  moving module 06 { 293000-2933b7 } -> { 1264000-12643b7 }
  moving module 05 { 28b000-28b1a0 } -> { 125c000-125c1a0 }
  moving module 04 { 28a000-28a652 } -> { 125b000-125b652 }
  moving module 03 { 2e2000-4a4aeb } -> { 12b3000-1475aeb }
  moving module 02 { 18f000-1cf91d } -> { 1160000-11a091d }
  moving module 01 { 12f000-18e200 } -> { 1100000-115f200 }
  Scanning fiasco -serial_esc
  Scanning sigma0
  Scanning moe rom/x86-l4linux.cfg
  Bootloader MMAP:
    [        0,     9f400) RAM (1)
    [    9f400,     a0000) reserved (2)
    [    f0000,    100000) reserved (2)
    [   100000,  1fffd000) RAM (1)
    [ 1fffd000,  20000000) reserved (2)
    [ fffc0000, 100000000) reserved (2)
  Relocated mbi to [0x2dd000-0x2dd4d6]
  Loading fiasco
  Loading sigma0
  Loading moe
  find kernel info page...
  found kernel info page at 0x400000
Regions of list regions
    [        0,       fff] {     1000} Arch   BIOS
    [    9f400,     9ffff] {      c00} Arch   BIOS
    [    f0000,     fffff] {    10000} Arch   BIOS
    [   100000,    10a1b3] {     a1b4} Sigma0 sigma0
    [   140000,    18b0df] {    4b0e0} Root   moe
    [   2d0000,    2e13e7] {    113e8} Boot   bootstrap
    [   2dd000,    2dd5d3] {      5d4} Root   Multiboot info
    [   300000,    38ffff] {    90000} Kern   fiasco
    [   400000,    464fff] {    65000} Kern   fiasco
    [  11a1000,   2d5cfff] {  1bbc000} Root   Modules Memory
    [ 1fffd000,  1fffffff] {     3000} Arch   BIOS
    [ fffc0000,  ffffffff] {    40000} Arch   BIOS
  API Version: (87) experimental
  Sigma0 config    ip:001001dc sp:002dca38
  Roottask config  ip:001401c4 sp:00000000
  Starting kernel fiasco at 003007a4
Welcome to Fiasco.OC (ia32)!
L4/Fiasco.OC ia32 microkernel (C) 1998-2011 TU Dresden
Rev: rUNKNOWN compiled with gcc 4.4.5 for Intel Pentium Pro    []
Build: #1 Thu Mar 22 16:45:26 CET 2012
Superpages: yes
Kmem:: cpu page at 1fff8000 (4096Bytes)
ACPI-Init
ACPI: RSDP[0xf8850]	r00 OEM:BOCHS.
ACPI: RSDT[0x203fde30]	r01 OEM:BOCHS. OEMTID:BXPCRSDT
ACPI: FACP[0x203ffe70]	r01 OEM:BOCHS. OEMTID:BXPCFACP
ACPI: SSDT[0x203fdf90]	r01 OEM:BOCHS. OEMTID:BXPCSSDT
ACPI: APIC[0x203fdeb0]	r01 OEM:BOCHS. OEMTID:BXPCAPIC
ACPI: HPET[0x203fde70]	r01 OEM:BOCHS. OEMTID:BXPCHPET
IO-APIC: MADT = 0x203fdeb0
IO-APIC[ 0]: struct: 0x203fdee4 adr=fec00000
IO-APIC[ 0]: pins 24
  PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
  PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
  PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
  PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
  PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
  PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
  PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
  PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
  PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
  PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
  PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
  PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
  PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
  PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
  PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
  PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
IO-APIC: dual 8259: yes
IO-APIC: ovr[ 0] 00 -> 2
IO-APIC: ovr[ 1] 05 -> 5
IO-APIC: ovr[ 2] 09 -> 9
IO-APIC: ovr[ 3] 0a -> a
IO-APIC: ovr[ 4] 0b -> b
Allocate cpu_mem @ 0xfeffb000
Local APIC[00]: version=11 max_lvt=5
APIC ESR value before/after enabling: 00000000/00000000
Using the PIT (i8254) on IRQ 2 for scheduling
SERIAL ESC: allocated IRQ 4 for serial uart
SERIAL ESC: allocated IRQ 4 for serial uart
Not using serial hack in slow timer handler.
Absolute KIP Syscalls using: Sysenter
CPU[0:0]: GenuineIntel (6:3:3:0)[00000633] Model: Pentium II (Klamath) at 2799 MHz
  32 KB L1 I Cache (8-way associative, 64 bytes per line)
  32 KB L1 D Cache (8-way associative, 64 bytes per line)
2048 KB L2 U Cache (8-way associative, 64 bytes per line)
Freeing init code/data: 28672 bytes (7 pages)
Calibrating timer loop... done.
SIGMA0: Hello!
  KIP @ 400000
  Found Fiasco: KIP syscalls: yes
  allocated 4KB for maintenance structures
SIGMA0: Dump of all resource maps
RAM:------------------------
[0:1000;9efff]
[0:10b000;13ffff]
[4:140000;18bfff]
[0:18c000;2dcfff]
[4:2dd000;2ddfff]
[0:2de000;3fffff]
[0:45e000;11a0fff]
[4:11a1000;2d5cfff]
[0:2d5d000;1d70efff]
IOMEM:----------------------
[0:0;fff]
[0:9f000;fffff]
[0:1fffd000;febfffff]
[0:fec01000;fedfffff]
[0:fee01000;ffffffff]
IO PORTS--------------------------
[0:0;fffffff]
MOE: Hello world
MOE: found 452844 KByte free memory
MOE: found RAM from 1000 to 1d70f000
MOE: allocated 471 KByte for the page array @0x1000
MOE: virtual user address space [0-bfffffff]
MOE: rom name space cap -> [C:501000]
  BOOTFS: [125b000-125b652] [C:503000] x86-l4linux.cfg
  BOOTFS: [125c000-125c1a0] [C:504000] x86-l4linux.io
  BOOTFS: [1264000-12643b7] [C:505000] x86-legacy.devs
  BOOTFS: [1476000-1563ee4] [C:506000] l4re
  BOOTFS: [1564000-1dcc66d] [C:507000] io
  BOOTFS: [1dcd000-1fc67e9] [C:508000] ned
  BOOTFS: [1fc7000-2128404] [C:509000] fb-drv
  BOOTFS: [2129000-244cfd0] [C:50a000] mag
  BOOTFS: [244d000-257eebf] [C:50b000] ex_fb_spectrum
  BOOTFS: [257f000-2a5ccef] [C:50c000] vmlinuz
  BOOTFS: [2a5d000-2d5d000] [C:50d000] ramdisk-x86.rd
No fpage received
MOE: cmdline: moe rom/x86-l4linux.cfg
MOE: Starting: rom/ned rom/x86-l4linux.cfg
MOE: loading 'rom/ned'
Ned says: Hi World!
Ned: loading file: 'rom/x86-l4linux.cfg'
IO      | Io service
IO      | Find root Pointer
IO      | Find root Pointer: f8850
IO      | ACPI: RSDP 0xf8850 00014 (v00 BOCHS )
IO      | ACPI: RSDT 0x1fffde30 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
IO      | ACPI: FACP 0x1ffffe70 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
IO      | ACPI: DSDT 0x1fffdfd0 01E22 (v01   BXPC   BXDSDT 00000001 INTL 20090521)
IO      | ACPI: FACS 0x1ffffe00 00040
IO      | ACPI: SSDT 0x1fffdf90 00037 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
IO      | ACPI: APIC 0x1fffdeb0 00072 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
IO      | ACPI: HPET 0x1fffde70 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
IO      | Parsing all Control Methods:
IO      | Table [DSDT](id 0001) - 247 Objects with 47 Devices 79 Methods 5 Regions
IO      | Parsing all Control Methods:
IO      | Table [SSDT](id 0002) - 1 Objects with 0 Devices 0 Methods 0 Regions
IO      |  tbxface-0601 [02] TbLoadNamespace       : ACPI Tables successfully acquired
IO      | evxfevnt-0184 [02] Enable                : Transition to ACPI mode successful
IO      | evgpeblk-1129 [04] EvCreateGpeBlock      : GPE 00 to 0F [_GPE] 2 regs on int 0x9
IO      | /home/horst/workspace/chess.clean/tudos/l4/pkg/acpica/lib-acpi/src/osl-basic.cc:57:AcpiOsInstallInterruptHandler: UNINPLEMENTED
IO      | Completing Region/Field/Buffer/Package initialization:................
IO      | Initialized 5/5 Regions 0/0 Fields 7/7 Buffers 4/4 Packages (257 nodes)
IO      | Initializing Device/Processor/Thermal objects by executing _INI methods:
IO      | Executed 0 _INI methods requiring 0 _STA executions (examined 50 objects)
IO      | evgpeblk-1234 [03] EvInitializeGpeBlock  : Found 0 Wake, Enabled 16 Runtime GPEs in this block
IO      | ACPICA-Version:20091214, System in ACPI MODE, 32bit timer
IO      | WARNING: device 'S2__' already assigned to an other virtual bus.
IO      | Ready. Waiting for request.
fbdrv   | libio: Warning: Finding 'icu' in system bus failed with 'No such object found'
mag     | Hello from MAG
fbdrv   | Trying execution of ``set VBE mode'' using x86emu
fbdrv   | Found VESA BIOS version 2.0
fbdrv   | OEM VGABIOS Cirrus extension
fbdrv   | Scanning for 'best' possible mode:
fbdrv   | Mode: 0x101     640x480@8, RGB: 0(0):0(0):0(0) mode: bb
fbdrv   | Mode: 0x110    640x480@15, RGB: 10(5):5(5):0(5) mode: bb
fbdrv   | Mode: 0x111    640x480@16, RGB: 11(5):5(6):0(5) mode: bb
fbdrv   | Mode: 0x112    640x480@24, RGB: 16(8):8(8):0(8) mode: bb
fbdrv   | Mode: 0x103     800x600@8, RGB: 0(0):0(0):0(0) mode: bb
fbdrv   | Mode: 0x113    800x600@15, RGB: 10(5):5(5):0(5) mode: bb
fbdrv   | Mode: 0x114    800x600@16, RGB: 11(5):5(6):0(5) mode: bb
fbdrv   | Mode: 0x115    800x600@24, RGB: 16(8):8(8):0(8) mode: bb
fbdrv   | Mode: 0x105    1024x768@8, RGB: 0(0):0(0):0(0) mode: bb
fbdrv   | Mode: 0x116   1024x768@15, RGB: 10(5):5(5):0(5) mode: bb
fbdrv   | Mode: 0x117   1024x768@16, RGB: 11(5):5(6):0(5) mode: bb
fbdrv   | Mode: 0x118   1024x768@24, RGB: 16(8):8(8):0(8) mode: bb
fbdrv   | Mode: 0x107   1280x1024@8, RGB: 0(0):0(0):0(0) mode: bb
fbdrv   | Mode: 0x119  1280x1024@15, RGB: 10(5):5(5):0(5) mode: bb
fbdrv   | Mode: 0x11a  1280x1024@16, RGB: 11(5):5(6):0(5) mode: bb
fbdrv   | Choosen mode:
fbdrv   | Mode: 0x11a  1280x1024@16, RGB: 11(5):5(6):0(5) mode: bb
fbdrv   | To force a specific setting use a '-m <mode>' option.
fbdrv   | VBE mode 0x11a successfully set.
fbdrv   | Framebuffer memory: phys: e0000000 - e0400000
fbdrv   |                     virt: 400000 - 800000
fbdrv   | Starting server loop
mag     | mapped frame buffer at 0x400000
mag     | View::Info:
mag     |   flags: 0
mag     |   size:  1280x1024  pos: 0, 0
mag     |   bytes_per_line: 2560
mag     |   buffer_offset:  0
mag     |   RGBA(2): 5(11):6(5):5(0):0(0)
mag     |   memory 400000-800000
mag     | L4INPUT native mode activated
mag     | L4INPUT:                !!! W A R N I N G !!!
mag     | L4INPUT:  Please, do not use Fiasco's "-esc" with L4INPUT.
mag     | L4INPUT:                !!! W A R N I N G !!!
mag     | serio: i8042 AUX port at 0x60,0x64 irq 12
mag     | serio: i8042 KBD port at 0x60,0x64 irq 1
mag     | input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
mag     | input: AT Translated Set 2 keyboard on isa0060/serio0
mag     | connect "ImExPS/2 Generic Explorer Mouse", isa0060/serio1/input0
mag     | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0
mag     | Plugin: Frame-buffer service started
mag     | Plugin: Mag_client service started
vmlinuz | libio: Warning: Query of 'vbus' failed!
vmlinuz | PH  0 (t:        1) offs=00001000 vaddr=00400000 vend=007b3000
vmlinuz |                     phys=00400000 ephys=007b3000
vmlinuz |                     f_sz=003b3000 memsz=003b3000 flgs=r-x
vmlinuz | PH  1 (t:        1) offs=003b4000 vaddr=007b3000 vend=008cc000
vmlinuz |                     phys=007b3000 ephys=008cc000
vmlinuz |                     f_sz=0006e000 memsz=00119000 flgs=rw-
vmlinuz | PH  2 (t:        4) offs=002e584c vaddr=006e484c vend=006e4870
vmlinuz |                     phys=006e484c ephys=006e4870
vmlinuz |                     f_sz=00000024 memsz=00000024 flgs=---
vmlinuz | Starting binary at 0x400000, argc=1 argv=0x80007fa4 *argv=0xb1007ff4 argv0=rom/vmlinuz
vmlinuz | External resolver is at 0xa80006e0
vmlinuz | ======> L4Linux 2.6 starting... <========
vmlinuz | Linux version 3.0.0-l4-svn23 (horst@kotao) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Mar 22 17:15:57 CET 2012
vmlinuz | Binary name: rom/vmlinuz
vmlinuz | Linux kernel command line (0 args): 
vmlinuz | CPU mapping (l:p)[1]: 0:0
vmlinuz | Image: 00400000 - 008cc000 [4912 KiB].
vmlinuz | Areas: Text:     00400000 - 007b3000 [3788kB] (a bit longer)
vmlinuz |        Data:     007b3000 - 007e44c0 [197kB]
vmlinuz |        Initdata: 007e5000 - 0081b000 [216kB]
vmlinuz |        BSS:      00822000 - 008bc000 [616kB]
vmlinuz | gs=43   fs=43
vmlinuz | Device scan:
vmlinuz | l4x_fiasco_gdt_entry_offset = 9
vmlinuz | rtc not found
vmlinuz | WARNING: RTC server does not seem there!
vmlinuz | l4lx_thread_create: Created thread 414 (cpu0) (u:b3000400, v:b3000600, sp:007b5ff4)
vmlinuz | main thread will be 414
vmlinuz | l4x_register_pointer_section: addr = 007b3000 size = 1150976
vmlinuz | section-with-init: virt: 0x7b3000 to 0x8cbfff [1124 KiB]
vmlinuz | section-with-init: Phys: 0x009ed000 to 0x00b06000, Size:  1150976
vmlinuz | l4x_linux_startup: thread 414.
vmlinuz | Main thread running, waiting...
vmlinuz | main thread: received startup message.
vmlinuz | l4x_setup_memory: Forcing superpages for main memory
vmlinuz | l4re_global_env: 0xb1007f6c
vmlinuz | Main memory size: 32MB
vmlinuz |     Main memory: virt: 0xc00000 to 0x2bfffff [32768 KiB]
vmlinuz |     Main memory: Phys: 0x03000000 to 0x05000000, Size: 33554432
vmlinuz | Filling lower ptabs...
vmlinuz | Done (1611 entries).
vmlinuz | l4x_register_pointer_section: addr = 007b3000 size = 1150976
vmlinuz |             end: virt: 0x7b3000 to 0x8cbfff [1124 KiB]
vmlinuz |             end: Phys: 0x009ed000 to 0x00b06000, Size:  1150976
vmlinuz | rtc not found
vmlinuz | l4lx_thread_create: Created thread 41b (timer.i0) (u:b3000800, v:00000000, sp:00851ff8)
vmlinuz | timer_irq_thread: Starting timer IRQ thread.
vmlinuz | WARNING: Unknown rdmsr: 00000186 at 0x7ec47e
vmlinuz | WARNING: Unknown rdmsr: 00000187 at 0x7ec47e
vmlinuz | WARNING: Unknown wrmsr: 000000c1 at 0x7ec50d
vmlinuz | WARNING: Unknown rdmsr: 000000c1 at 0x7ec521
vmlinuz | Invalid IO-Port access at pc = 005b9cec port=0x1f7
vmlinuz | Page fault (non-resolved): pfa=1a8 pc=4947ad
Die message: Trap: 14
vmlinuz | panic: going to sleep forever, bye
modules.list (application/octet-stream, 310 B) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.