Re: Touchscreen

Dear Matthias, 

1) I created a linux_bus for one of the L4linux by changing the vbus file with the following lines:

linux_bus => new System_bus()
{
  PCI0 => new PCI_bus()
  {
    pci[] => wrap(hw-root.match("PCI/CC_0c"));
  }
}

2) I activated for the usb keyboard and the mouse the following configuration parameters for vmlinuz:

for USB mouse support: 
USB_SUPPORT, CONFIG_USB_SERIAL, CONFIG_USB_SERIAL_GENERIC, CONFIG_HIDRAW, CONFIG_USB_HID, CONFIG_USB_G_HID, INPUT_MOUSEDEV, CONFIG_MOUSE_SYNAPTIC_USB, CONFIG_USB_MOUSE and CONFIG_USB_KBD 

for PCI:
CONFIG_PCI, CONFIG_L4_VPCI 

3) Compiled and run again on the x86. Unfortunately still I do not have any usb mouse or keyboard support. 

Do you guys have an idea on this?
Best Regards,




________________________________
 From: Wajidali Whowe <[email protected]>
To: Matthias Lange <[email protected]> 
Cc: "[email protected]" <[email protected]> 
Sent: Wednesday, November 7, 2012 2:19 PM
Subject: Re: Touchscreen
 

Dear Matthias, 

Thank you very much for the information, the steps are clear except for the sentence "connect L4Linux to the "ev" capability of mag", could you please kindly detail this part? 

Best Regards,


________________________________
 From: Matthias Lange <[email protected]>
To: Wajidali Whowe <[email protected]> 
Cc: "[email protected]" <[email protected]> 
Sent: Wednesday, November 7, 2012 6:04 AM
Subject: Re: Touchscreen
 

On 07.11.2012, at 02:56, Wajidali Whowe wrote:

I am truely sorry to disturb again, however, based on various tests on different devices I realized that the anything at USB port is not detected by the mag... 
>For instance, on a laptop the trackpad and original keyboard are both detected and work perfect, however any additional keyboard or mouse at the USB port is neglected somehow.

That's because l4re does not feature a native USB driver/stack. Instead you can use an instance of L4Linux and configure it to act as an input server. Make sure to configure USB support and the right drivers into L4Linux. Then you need to put the correct devices onto the virtual L4Linux bus and connect L4Linux to the "ev" capability of mag.

Matthias.

Best regards,
>
>
>
>________________________________
> From: Wajidali Whowe <[email protected]>
>To: "[email protected]" <[email protected]> 
>Sent: Wednesday, November 7, 2012 2:18 AM
>Subject: Re: Touchscreen
> 
>
>By the way usb-mouse is directly deactivated, I mean no-light at all... 
>
>
>Regards,
>
>
>
>________________________________
> From: Wajidali Whowe <[email protected]>
>To: Martin Unzner <[email protected]>; "[email protected]" <[email protected]> 
>Sent: Wednesday, November 7, 2012 12:33 AM
>Subject: Re: Touchscreen
> 
>
>Dear Martin,
>
>
>thank you very much for the answer. I have indeed a strange problem... Quite honestly, I am not sure whether the touchscreen is connected to a USB port but at the boot up I strangely see a mouse arrow which is vanished in 2-3 seconds. (by the way I have a mouse and a keyboard connected through the USB ports). I am not yet sure whether this is due to some crashes... 
>
>
>Best Regards,
>
>
>
>________________________________
> From: Martin Unzner <[email protected]>
>To: [email protected] 
>Sent: Tuesday, November 6, 2012 9:53 AM
>Subject: Re: Touchscreen
> 
>
>Hi Wajidali,
>
>as far as I am concerned, a touchscreen for x86 computers is
      handled like a mouse. So if your touchscreen is connected to like
      an internal USB port or via virtual PS/2, you should be able to
      run everything that has mouse support in Fiasco/L4, like DOpE or
      nitpicker (see also Adam's overview e-mail on graphics:
      http://os.inf.tu-dresden.de/pipermail/l4-hackers/2010/004454.html
      ).
>
>Regards!
>
>Martin
>
>Am 05.11.2012 23:42, schrieb Wajidali Whowe:
>
>Dear all,
>>
>>
>>do you have any experience on configuring the touchscreen for L4? I have an x86 computer with a touchscreen and do not know where to start. Does anyone have a small tip for me to start? 
>>
>>
>>Best Regards
>>
>>
>>_______________________________________________
l4-hackers mailing list [email protected] http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers 
>
>_______________________________________________
>l4-hackers mailing list
>[email protected]
>http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>
>
>
>_______________________________________________
>l4-hackers mailing list
>[email protected]
>http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>
>
>
>_______________________________________________
>l4-hackers mailing list
>[email protected]
>http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>
>
>_______________________________________________
>l4-hackers mailing list
>[email protected]
>http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>

-- 
Dipl.-Inf. Matthias Lange <[email protected]>
Security in
 Telecommunications
TU Berlin / Deutsche Telekom Laboratories
Ernst-Reuter-Platz 7, 10587 Berlin
Phone: +49 - 30 - 8353 58 553
Mobile: +49 - 160 - 587 28 07
Web: http://www.fgsect.de 



_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers

_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers