Re: Fiasco.OC with ARM TrustZone

Chao-Jui Chang <[email protected]>
Newsgroups gmane.comp.micro-kernel.l4.devel
Message-ID <CAM=iH4oit+6SSFE3-rSUY+iJKZRaQs7FsVF3siGWnPQsNGneOA@mail.gmail.com>
Hi Adam,

Thanks for your reply.

After I change the memory to 1023, it runs but stops at
###
Timer for CPU0 is at IRQ 28
Calibrating timer loop...
###

By the way, how to turn on the module loading information during booting?
The latest snapshot and svn only prints message starting from "Hello from
Startup::stage2"
### Start cur ###
Exynos4412 # run fiasco
Partition1: Start Address(0x1000), Size(0x32000)
reading bootstrap.raw

803080 bytes read
Boot with zImage

Starting kernel ...

Hello from Startup::stage2
Number of IRQs available at this GIC: 160
FPU0: Arch: VFPv3(3), Part: VFPv3(30), r: 4, v: 9, i: 41, t: hard, p:
dbl/sngl
Watchdog initialized
SERIAL ESC: allocated IRQ 305 for serial uart
Not using serial hack in slow timer handler.
Welcome to Fiasco.OC (arm)!
L4/Fiasco.OC arm microkernel (C) 1998-2013 TU Dresden
Rev: rUnversioned director compiled with gcc 4.5.2 for Samsung Exynos    []
Build: #22  17:15:49 CST 2013

Timer for CPU0 is at IRQ 28
Calibrating timer loop...
### End ###

Thanks,
Chao-Jui


2013/5/12 Adam Lackorzynski <[email protected]>

> Hi,
>
> On Tue May 07, 2013 at 17:51:42 +0800, Chao-Jui Chang wrote:
> > Is trustzone working on exynos 4412 platform?
>
> It is generally supposed to work but this also depends on the particular
> board/system due to board configs etc.
>
> > I have selected the follow item in Fiasco config menu:
> >  * Platform Timer (Multi-core timer)
> >  * Use ExtGic
> >  * Execution Model (TrustZone normal side)
> >
> > But it stop at early stage.
> > Same result for Execution Model (Standard mode).
> > but no message for Execution Model (TrustZone secure side).
>
> One reason could be the configured amount of memory, is it 1023 or 1024MB?
>
> > If the trustzone is disabled in u-boot, the 'Standard mode' works fine.
>
> That could also indicate that.
>
> >
> Adam
> --
> Adam                 [email protected]
>   Lackorzynski         http://os.inf.tu-dresden.de/~adam/
>
> _______________________________________________
> l4-hackers mailing list
> [email protected]
> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>

_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.