l4linux starting - How can I see all Debug messages on serial line ?

Gesendet: Donnerstag, 18. Juli 2013 um 23:58 Uhr
Von: "Adam Lackorzynski" <[email protected]>
An: "Rudolf Weber" <[email protected]>
Cc: "l4 l4hackerlist" <[email protected]>
Betreff: Re: l4linux: l4x_setup_memory:Cant get main memory
On Thu Jul 18, 2013 at 16:42:26 +0200, Rudolf Weber wrote:


>> The Booting-Result is better now, but an new error occurs:
>>
>> l4linux | Invalid IO-Port access at pc = 0080b476 port=0x110
>>
>> In the System.map I found
>> 0080b400 t el3_init_module
>> which is in the src/l4linux/drivers/net/ethernet/3com/3c509.c - Module.
>> Here the driver scans the io ports 0x110,0x120,...,0x200
>>
>> Ok - I will throw it out.
Yes, it boots further, loads the RAM-Disk and the booting in the mag-Window shows further errors.
I can't see the errors that quickly, and they don't appear in the log of qemu.

Question1: How can I see the error messages of L4linux on serial lines?

I tried this configuration without mag (and hope, all l4linux-Output should appear at the seril console)
modaddr  0x002000000

entry L4Linux
  kernel fiasco -serial_esc
  roottask fiasco -serial_esc
  roottask moe rom/l4linux.cfg
  module l4linux.cfg
  module l4re
  module ned
  module io
  module x86-legacy.devs
  module l4lx-x86.io
  module vmlinuz
  module ramdisk-x86.rd

and l4linux.cfg
loader = L4.default_loader;

-- io - server
vbus_l4linux = loader:new_channel();
vbus_input   = loader:new_channel();

loader:start(
  {
     caps = {
      sigma0  = L4.cast(L4.Proto.Factory, L4.Env.sigma0):create(L4.Proto.Sigma0);
      icu     = L4.Env.icu;
      input   = vbus_input:svr();
      l4linux = vbus_l4linux:svr();
     },
  },  "rom/io rom/x86-legacy.devs rom/l4lx-x86.io");

loader:start(
  {
     caps = {
        log = L4.Env.log:m("rws"),
        vbus = vbus_l4linux;
     },
     l4re_dbg = L4.Dbg.Warn,
     log = { "l4linux", "yellow" },
  }, "rom/vmlinuz mem=64M l4x_rd=rom/ramdisk-x86.rd root=1:0 ramdisk_size=4000 init=/bin/sh");

Result:
  I can't see any severe errors, but the prompt of the /bin/sh is not shown :-(

I opened the Fiasco - Debugger, looked the backtrace of vmlinux-thread and the question come:
Question2: How do I map the addresses to the System.map? -> Is there any tutorial available ?   


The l4linux configuration x86-ux_defconfig works with grub-Module-configuration
 modaddr 0x02000000

default-kernel fiasco -serial_esc
default-bootstrap bootstrap

entry L4Linux-mag-x86
roottask moe rom/l4lx-gfx.cfg
module l4re
module ned
module l4lx-gfx.cfg
module io
module fb-drv
module mag
module x86-legacy.devs
module l4lx-x86.io
module vmlinuz
module ramdisk-x86.rd


Related to Question1 is
Question3:How can I see the messages of l4linux on serialline ?

My try:
The configuration:
modaddr  0x002000000

entry L4Linux
  kernel fiasco -serial_esc
  roottask fiasco -serial_esc
  roottask moe rom/l4linux.cfg
  module l4linux.cfg
  module l4re
  module ned
  module io
  module x86-legacy.devs
  module l4lx-x86.io
  module vmlinuz
  module ramdisk-x86.rd
with x86-legacy.devs and l4lx-x86.io from l4re-snapshot-2013060718
and l4linux.cfg like above don't lead to the prompt of the /bin/sh
but I can't understand what is wrong.


_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers