Re: Device Tree Blob support in l4linux
Yunchuan Geng <[email protected]>
| Newsgroups | gmane.comp.micro-kernel.l4.devel |
|---|---|
| Message-ID | <[email protected]> |
Hello Adam and Martin, I hope you do not mind I join this conversation. I am facing the exactly same problem Martin has. except I am using imx6q. So I got the same result that dtb seems be read in but does not take effect as Martin reported. And I got this from log /Machine model: L4Linux (DT)/ and now digging into the code how dtb are read and used. Please help! -Yunchuan On 08/19/2014 01:13 AM, Adam Lackorzynski wrote: > On Mon Aug 18, 2014 at 19:38:54 +0200, Martin Schröder wrote: >> Am 13.08.2014 um 22:40 schrieb Adam Lackorzynski: >> >>> So it worked before using DTBs? Some config/setting issue? >>> >> Yes, both network of my imx28 worked withou DTB. I is some config issue: >> >> After searching a while, I am sure that the Device Tree is not used in my >> configuration at all. As I wrote in an older thread "IO configuration >> language" I am using on the vbus the strings >> "imx28-fec.mydev0" => wrap(hw-root.NIC0) >> to get the platform device added in mach_setup.c. This is done by a custom >> handler in the callbacks which captures the "imx28-fec.mydev0" and >> "imx28-fec.mydev1" devices and creates the platform device. >> After renaming the device to "imx28-fec" (and thus disabling the private >> callback), I see that the device is still added in a generic way (IRQ, MEM, >> PORT) in copy_platform_device, but without the required additional data (Phy >> Interface Mode). So Ethernet is still probed but due to the wring mode not >> working. >> >> Now I removed the strings from the io configuration. Mach_setup.c is no >> longer adding platform devices and ... Ethernet is no longer probed. I also >> verified that the DTB was loaded, but for some reasons the DTB is >> unfortunately not used or does not match. >> >> I am using the imx28-evk.dts where I replaced the "model" and "compatible" >> line by what I found in simple.dts. > Ok, that's one thing to do. Does Linux say that it uses a DT? Like: > [ 0.000000] Machine model: L4Linux (DT) > > > > Adam _______________________________________________ l4-hackers mailing list [email protected] http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers