Re: Running l4android on cubieboard2

On 01/20/2015 12:29 PM, cem akpolat wrote:
> As you mentioned I enabled FPU in Fiasco kernel and re-compiled, again I
> have the same issue. I couldn't solve the previous issue. The issue that
> you mentioned, I disabled FPU in the l4linux configuration, that's why
> this wasn't a solution. So now, as FPU is in Fiasco enabled, I don't
> receive anymore this failure message, however, the following issue is
> still available "sh not tainted". I am not sure but It can be an issue
> in the file system (ramdisk-arm.rd). Do you have a stable ramdisk file
> system for arm, otherwise I will compile new file system.

A working ramdisk is contained in the latest snapshot [1]

Matthias.

[1] http://os.inf.tu-dresden.de/download/snapshots-oc/

> 
> =========
> RAMDISK: ext2 filesystem found at block 0
> RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
> EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
> EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
> VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
> Freeing unused kernel memory: 116K (02307000 - 02324000)
> Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> 
> CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-l4-g5d0896b #8
> [<0200c9c8>] (unwind_backtrace) from [<020055e8>] (show_stack+0x10/0x14)
> [<020055e8>] (show_stack) from [<0223f704>] (panic+0x7c/0x1e0)
> [<0223f704>] (panic) from [<0201e6a8>] (do_exit+0x708/0x7a0)
> [<0201e6a8>] (do_exit) from [<0201e80c>] (do_group_exit+0x3c/0x9c)
> [<0201e80c>] (do_group_exit) from [<02028390>]
> (get_signal_to_deliver+0x148/0x490)
> [<02028390>] (get_signal_to_deliver) from [<02006be8>]
> (do_signal+0x114/0x448)
> [<02006be8>] (do_signal) from [<0200a210>] (l4x_vcpu_entry_c+0xa94/0x1da8)
> [<0200a210>] (l4x_vcpu_entry_c) from [<001074f0>] (0x1074f0)
> ---[ end Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> 
> panic: going to sleep forever, bye
> l4linux | panic: going to sleep forever, bye
> ===============================
> 
> Cheers,
> Cem
> 
> Cem Akpolat
> 
> On Mon, Jan 19, 2015 at 11:14 PM, Adam Lackorzynski
> <[email protected] <mailto:[email protected]>> wrote:
> 
>     On Mon Jan 19, 2015 at 18:56:59 +0100, cem akpolat wrote:
>     > I encountered new failure, by the way I tested with hello word application.
>     > It works fine. I couldn't fine an explanation related  "sh Not tainted".
>     > There are of course some general definitions, but with them I cannot find
>     > the missing part here.
> 
>     My first guess here is missing FPU support in Fiasco. How did you fix
>     the previous issue you had while booting Linux?
> 
>     > Additionally I want to ask, the booting parameters
>     > in uboot and the parameters in l4lx.cfg are evaluated together or l4lx.cfg
>     > booting parameters ignores the uboot booting parameters.
> 
>     The arguments given in uboot are not getting through to L4Linux, i.e. it
>     does not see them.
> 
>     > Freeing unused kernel memory: 116K (02306000 - 02323000)
>     > Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>     >
>     > CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-l4-svn50 #2
>     > [<0200c198>] (unwind_backtrace) from [<020054e8>] (show_stack+0x10/0x14)
>     > [<020054e8>] (show_stack) from [<0223dbe4>] (panic+0x7c/0x1e0)
>     > [<0223dbe4>] (panic) from [<02018ce0>] (do_exit+0x708/0x7a0)
>     > [<02018ce0>] (do_exit) from [<02018e44>] (do_group_exit+0x3c/0x9c)
>     > [<02018e44>] (do_group_exit) from [<020229c8>]
>     > (get_signal_to_deliver+0x148/0x490)
>     > [<020229c8>] (get_signal_to_deliver) from [<02006a30>]
>     > (do_signal+0x114/0x448)
>     > [<02006a30>] (do_signal) from [<02009b14>] (l4x_vcpu_entry_c+0x934/0x1b18)
>     > [<02009b14>] (l4x_vcpu_entry_c) from [<000ea560>] (0xea560)
>     > ---[ end Kernel panic - not syncing: Attempted to kill init!
>     > exitcode=0x0000000b
>     >
>     > panic: going to sleep forever, bye
>     > l4linux | panic: going to sleep forever, bye
> 
> 
> 
>     Adam
>     --
>     Adam                 [email protected]
>     <mailto:[email protected]>
>       Lackorzynski         http://os.inf.tu-dresden.de/~adam/
> 
>     _______________________________________________
>     l4-hackers mailing list
>     [email protected] <mailto:[email protected]>
>     http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
> 
> 
> 
> 
> _______________________________________________
> l4-hackers mailing list
> [email protected]
> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
> 


-- 
Matthias Lange, [email protected], +49 - 351 - 41 88 86 14

Kernkonzept GmbH.  Sitz: Dresden.  Amtsgericht Dresden, HRB 31129.
Geschäftsführer: Dr.-Ing. Michael Hohmuth