Re: Boot L4Linux Error
Matthias Lange <[email protected]>
| Newsgroups | gmane.comp.micro-kernel.l4.devel |
|---|---|
| Message-ID | <[email protected]> |
Hi,
On 05/27/2015 04:41 AM, 刘海剑 wrote:
> Hello everyone, after building l4re-snapshot-2014092821 on my
> Ubuntu-14.04(32bit), I run L4Linux-mag-x86, and get some errors.
Actually it looks ok. Try changing "tty0" to "ttyLv0" on the Linux
kernel cmdline. This should give you a shell prompt in your terminal.
Matthias.
> The information is as follows:
>
> qemu-system-i386 -kernel
> /home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/bootstrap
> -append "bootstrap -modaddr 0x01100000" -initrd
> "/home/lhj/L4Linux/l4re-snapshot-2014092821/obj/fiasco/ia32/fiasco
> -serial_esc,/home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/sigma0
> ,/home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/moe
> rom/l4lx-gfx.cfg,/home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/l4re
> ,/home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/ned
> ,/home/lhj/L4Linux/l4re-snapshot-2014092821/src/l4/conf/examples/l4lx-gfx.cfg
> ,/home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/io ,/home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/fb-drv
> ,/home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/mag
> ,/home/lhj/L4Linux/l4re-snapshot-2014092821/files/cfg/x86-legacy.devs
> ,/home/lhj/L4Linux/l4re-snapshot-2014092821/src/l4/conf/examples/l4lx-x86.io
> ,/tmp/QEVRyiQlKD/vmlinuz
> ,/home/lhj/L4Linux/l4re-snapshot-2014092821/files/ramdisk-x86.rd " -m
> 256 -serial stdio
>
> L4 Bootstrapper
> Build: #1 Tue May 26 16:48:47 CST 2015, x86-32, 4.8.2
> RAM: 0000000000000000 - 000000000009fbff: 639kB
> RAM: 0000000000100000 - 000000000fffdfff: 261112kB
> Total RAM: 255MB
> Scanning
> /home/lhj/L4Linux/l4re-snapshot-2014092821/obj/fiasco/ia32/fiasco
> -serial_esc
> Scanning
> /home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/sigma0
> Scanning
> /home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/moe rom/l4lx-gfx.cfg
> need 1368 bytes to copy MBI
> reserved 1368 bytes at 0x2000
> Moving up to 13 modules behind 1100000
> moving module 12 { 2266400-25663ff } -> { 3085000-3384fff } [3145728]
> moving module 11 { 1e8e400-2265919 } -> { 2cad000-3084519 } [4027674]
> moving module 10 { 1e8d400-1e8d626 } -> { 2cac000-2cac226 } [551]
> moving module 09 { 1e8c400-1e8c63e } -> { 2cab000-2cab23e } [575]
> moving module 08 { 1a29400-1e8ba0b } -> { 2848000-2caa60b } [4597260]
> moving module 07 { 189f400-1a28598 } -> { 26be000-2847198 } [1610137]
> moving module 06 { 98e400-189ee03 } -> { 17ad000-26bda03 } [15796740]
> moving module 05 { 98d400-98d96a } -> { 17ac000-17ac56a } [1387]
> moving module 04 { 736400-98ce09 } -> { 1555000-17aba09 } [2451978]
> moving module 03 { 5fc400-735b2c } -> { 141b000-155472c } [1283885]
> moving module 02 { 3a9400-5fb7eb } -> { 11c8000-141a3eb } [2434028]
> moving module 01 { 353400-3a928a } -> { 1172000-11c7e8a } [351883]
> moving module 00 { 2e1400-352677 } -> { 1100000-1171277 } [463480]
> Loading /L4Linux/l4re-snapshot-2014092821/obj/fiasco/ia32/fiasco
> Loading re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/sigma0
> Loading /l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/moe
> find kernel info page...
> found kernel info page at 0x400000
> Regions of list 'regions'
> [ 0, fff] { 1000} Arch BIOS
> [ 1000, 1fff] { 1000} Kern
> /L4Linux/l4re-snapshot-2014092821/obj/fiasco/ia32/fiasco
> [ 2000, 2557] { 558} Root mbi_rt
> [ 9fc00, 9ffff] { 400} Arch BIOS
> [ f0000, fffff] { 10000} Arch BIOS
> [ 100000, 10b193] { b194} Sigma0
> re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/sigma0
> [ 140000, 193363] { 53364} Root
> /l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/moe
> [ 2d0400, 2df43f] { f040} Boot bootstrap
> [ 300000, 38ffff] { 90000} Kern
> /L4Linux/l4re-snapshot-2014092821/obj/fiasco/ia32/fiasco
> [ 400000, 475fff] { 76000} Kern
> /L4Linux/l4re-snapshot-2014092821/obj/fiasco/ia32/fiasco
> [ 141b000, 3384fff] { 1f6a000} Root Module
> [ fffe000, fffffff] { 2000} Arch BIOS
> [ fffc0000, ffffffff] { 40000} Arch BIOS
> API Version: (87) experimental
> Sigma0 config ip:0010021c sp:00000000
> Roottask config ip:001401f6 sp:00000000
> Starting kernel
> /L4Linux/l4re-snapshot-2014092821/obj/fiasco/ia32/fiasco at 003007b8
>
> Welcome to Fiasco.OC (ia32)!
> L4/Fiasco.OC ia32 microkernel (C) 1998-2013 TU Dresden
> Rev: unknown compiled with gcc 4.8.2 for Intel Pentium []
> Build: #1 Tue May 26 16:33:03 CST 2015
>
> Performance-critical config option(s) detected:
> CONFIG_NDEBUG is off
> CONFIG_NO_FRAME_PTR is off
>
> Superpages: yes
> Kmem:: cpu page at fffd000 (4096Bytes)
> ACPI-Init
> ACPI: RSDP[0xf09e0]r00 OEM:BOCHS.
> ACPI: RSDT[0x203ffbc1]r01 OEM:BOCHS. OEMTID:BXPCRSDT
> ACPI: FACP[0x203ff1c0]r01 OEM:BOCHS. OEMTID:BXPCFACP
> ACPI: SSDT[0x203ff234]r01 OEM:BOCHS. OEMTID:BXPCSSDT
> ACPI: APIC[0x203ffb11]r01 OEM:BOCHS. OEMTID:BXPCAPIC
> ACPI: HPET[0x203ffb89]r01 OEM:BOCHS. OEMTID:BXPCHPET
> IO-APIC: MADT = 0x203ffb11
> IO-APIC[ 0]: struct: 0x203ffb45 adr=fec00000
> IO-APIC[ 0]: pins 24
> PIN[ 0m]: vector=20, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 1m]: vector=21, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 2m]: vector=22, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 3m]: vector=23, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 4m]: vector=24, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 5m]: vector=25, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 6m]: vector=26, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 7m]: vector=27, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 8m]: vector=28, del=0, dm=physical, dest=0 (high, edge)
> PIN[ 9m]: vector=29, del=0, dm=physical, dest=0 (high, edge)
> PIN[10m]: vector=2a, del=0, dm=physical, dest=0 (high, edge)
> PIN[11m]: vector=2b, del=0, dm=physical, dest=0 (high, edge)
> PIN[12m]: vector=2c, del=0, dm=physical, dest=0 (high, edge)
> PIN[13m]: vector=2d, del=0, dm=physical, dest=0 (high, edge)
> PIN[14m]: vector=2e, del=0, dm=physical, dest=0 (high, edge)
> PIN[15m]: vector=2f, del=0, dm=physical, dest=0 (high, edge)
> PIN[16m]: vector=30, del=0, dm=physical, dest=0 (high, edge)
> PIN[17m]: vector=31, del=0, dm=physical, dest=0 (high, edge)
> PIN[18m]: vector=32, del=0, dm=physical, dest=0 (high, edge)
> PIN[19m]: vector=33, del=0, dm=physical, dest=0 (high, edge)
> PIN[20m]: vector=34, del=0, dm=physical, dest=0 (high, edge)
> PIN[21m]: vector=35, del=0, dm=physical, dest=0 (high, edge)
> PIN[22m]: vector=36, del=0, dm=physical, dest=0 (high, edge)
> PIN[23m]: vector=37, del=0, dm=physical, dest=0 (high, edge)
> IO-APIC: dual 8259: yes
> IO-APIC: ovr[ 0] 00 -> 2 0
> IO-APIC: ovr[ 1] 05 -> 5 d
> IO-APIC: ovr[ 2] 09 -> 9 d
> IO-APIC: ovr[ 3] 0a -> a d
> IO-APIC: ovr[ 4] 0b -> b d
> Allocate cpu_mem @ 0xfdbf9400
> FPU0: SSE
> Local APIC[00]: version=11 max_lvt=5
> APIC ESR value before/after enabling: 00000000/00000000
> Using the Local APIC timer on vector 90 (Periodic Mode) for scheduling
> ACPI: FACS phys=fffe000 virt=0x203fe000
> ACPI: HW sig=0
> SERIAL ESC: allocated IRQ 4 for serial uart
> Absolute KIP Syscalls using: Sysenter
> Enable MSI support: chained IRQ mgr @ 0xfdbf9150
> SERIAL ESC: allocated IRQ 4 for serial uart
> Not using serial hack in slow timer handler.
> CPU[0]: GenuineIntel (6:6:3:0)[00000663] Model: QEMU Virtual CPU version
> 2.0.0 at 2507MHz
>
> 32 KB L1 I Cache (8-way associative, 64 bytes per line)
> 32 KB L1 D Cache (8-way associative, 64 bytes per line)
> 2048 KB L2 U Cache (8-way associative, 64 bytes per line)
>
> Freeing init code/data: 24576 bytes (6 pages)
>
> Calibrating timer loop... done.
> MDB: use page size: 22
> MDB: use page size: 12
> SIGMA0: Hello!
> KIP @ 400000
> Found Fiasco: KIP syscalls: yes
> allocated 4KB for maintenance structures
> SIGMA0: Dump of all resource maps
> RAM:------------------------
> [4:2000;2fff]
> [0:3000;9efff]
> [0:10c000;13ffff]
> [4:140000;193fff]
> [0:194000;3fffff]
> [0:470000;141afff]
> [4:141b000;3384fff]
> [0:3385000;eb8afff]
> IOMEM:----------------------
> [0:0;fff]
> [0:9f000;fffff]
> [0:fffe000;febfffff]
> [0:fec01000;fedfffff]
> [0:fee01000;ffffffff]
> IO PORTS--------------------------
> [0:0;fffffff]
> MOE: Hello world
> MOE: found 207796 KByte free memory
> MOE: found RAM from 2000 to eb8b000
> MOE: allocated 235 KByte for the page array @0x3000
> MOE: virtual user address space [0-bfffffff]
> MOE: rom name space cap -> [C:501000]
> BOOTFS: [141b000-155472d] [C:503000] l4re
> BOOTFS: [1555000-17aba0a] [C:504000] ned
> BOOTFS: [17ac000-17ac56b] [C:505000] l4lx-gfx.cfg
> BOOTFS: [17ad000-26bda04] [C:506000] io
> BOOTFS: [26be000-2847199] [C:507000] fb-drv
> BOOTFS: [2848000-2caa60c] [C:508000] mag
> BOOTFS: [2cab000-2cab23f] [C:509000] x86-legacy.devs
> BOOTFS: [2cac000-2cac227] [C:50a000] l4lx-x86.io
> BOOTFS: [2cad000-308451a] [C:50b000] vmlinuz
> BOOTFS: [3085000-3385000] [C:50c000] ramdisk-x86.rd
> MOE: cmdline:
> /home/lhj/L4Linux/l4re-snapshot-2014092821/obj/l4/x86/bin/x86_586/l4f/moe rom/l4lx-gfx.cfg
> MOE: Starting: rom/ned rom/l4lx-gfx.cfg
> MOE: loading 'rom/ned'
> Ned says: Hi World!
> Ned: loading file: 'rom/l4lx-gfx.cfg'
> io | Io service
> io | Find root Pointer
> io | Find root Pointer: f09e0
> io | ACPI: RSDP 0xf09e0 00014 (v00 BOCHS )
> io | ACPI: RSDT 0xffffbc1 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC
> 00000001)
> io | ACPI: FACP 0xffff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC
> 00000001)
> io | ACPI: DSDT 0xfffe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC
> 00000001)
> io | ACPI: FACS 0xfffe000 00040
> io | ACPI: SSDT 0xffff234 008DD (v01 BOCHS BXPCSSDT 00000001 BXPC
> 00000001)
> io | ACPI: APIC 0xffffb11 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC
> 00000001)
> io | ACPI: HPET 0xffffb89 00038 (v01 BOCHS BXPCHPET 00000001 BXPC
> 00000001)
> io | Parsing all Control Methods:
> io | Table [DSDT](id 0001) - 144 Objects with 18 Devices 52 Methods
> 8 Regions
> io | Parsing all Control Methods:
> io | Table [SSDT](id 0002) - 155 Objects with 32 Devices 42 Methods
> 1 Regions
> io | tbxfload-0274 [02] TbLoadNamespace : ACPI Tables
> successfully acquired
> io | evxfevnt-0175 [02] Enable : Transition to ACPI
> mode successful
> io | evgpeblk-0523 [04] EvCreateGpeBlock : GPE 00 to 0F [_GPE]
> 2 regs on int 0x9
> io | Completing Region/Field/Buffer/Package
> initialization:.....................................
> io | Initialized 9/9 Regions 2/2 Fields 21/21 Buffers 5/5 Packages
> (308 nodes)
> io | Initializing Device/Processor/Thermal objects by executing
> _INI methods:
> io | Executed 0 _INI methods requiring 1 _STA executions (examined
> 53 objects)
> io | ACPICA-Version:20121018, System in ACPI MODE, 32bit timer
> io | evgpeblk-0615 [03] EvInitializeGpeBlock : Enabled 16 GPEs in
> this block
> io | IRQ [00000000000000-00000000000000 1] none (32bit)
> (align=0 flags=40201)
> io | IRQ [00000000000000-00000000000000 1] none (32bit)
> (align=0 flags=40201)
> io | rom/l4lx-x86.io:17.28-36: warning: could not find 'PNP0100'
> io | Ready. Waiting for request.
> mag | Hello from MAG
> fb-drv | Trying execution of ``set VBE mode'' using x86emu
> fb-drv | Found VESA BIOS version 3.0
> fb-drv | OEM SeaBIOS VBE(C) 2011
> fb-drv | VBE mode 0x117 successfully set.
> fb-drv | Framebuffer memory: phys: fc000000 - fc400000
> fb-drv | virt: 400000 - 800000
> fb-drv | Starting server loop
> mag | mapped frame buffer at 0x400000
> mag | View::Info:
> mag | flags: 0
> mag | size: 1024x768 pos: 0, 0
> mag | bytes_per_line: 2048
> mag | buffer_offset: 0
> mag | RGBA(2): 5(11):6(5):5(0):0(0)
> mag | memory 400000-800000
> mag | Plugin: Mag_client service started
> mag | Plugin: Frame-buffer service started
> mag | L4INPUT native mode activated
> mag | L4INPUT: !!! W A R N I N G !!!
> mag | L4INPUT: Please, do not use Fiasco's "-esc" with L4INPUT.
> mag | L4INPUT: !!! W A R N I N G !!!
> mag | serio: i8042 AUX port at 0x60,0x64 irq 12
> mag | serio: i8042 KBD port at 0x60,0x64 irq 1
> mag | input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
> mag | input: AT Translated Set 2 keyboard on isa0060/serio0
> mag | connect "ImExPS/2 Generic Explorer Mouse", isa0060/serio1/input0
> mag | connect "AT Translated Set 2 keyboard", isa0060/serio0/input0
> l4linux | PH 0 (t: 1) offs=00001000 vaddr=00400000 vend=006dc000
> l4linux | phys=00400000 ephys=006dc000
> l4linux | f_sz=002dc000 memsz=002dc000 flgs=r-x
> l4linux | PH 1 (t: 1) offs=002dd000 vaddr=006dc000 vend=007d8000
> l4linux | phys=006dc000 ephys=007d8000
> l4linux | f_sz=00050f30 memsz=000fc000 flgs=rw-
> l4linux | PH 2 (t: 4) offs=0023cd64 vaddr=0063bd64 vend=0063bd88
> l4linux | phys=0063bd64 ephys=0063bd88
> l4linux | f_sz=00000024 memsz=00000024 flgs=---
> l4linux | Starting binary at 0x400000, argc=6 argv=0xafff4f90
> *argv=0xb1007ff4 argv0=rom/vmlinuz
> l4linux | External resolver is at 0xa8000730
> l4linux | ======> L4Linux starting... <========
> l4linux | Linux version 3.16.0-l4 (lhj@ubuntu) (gcc version 4.8.2
> (Ubuntu 4.8.2-19ubuntu1) ) #1 Tue May 26 16:58:34 CST 2015
> l4linux | Binary name: rom/vmlinuz
> l4linux | Linux kernel command line (5 args): mem=64M console=tty0
> l4x_rd=rom/ramdisk-x86.rd root=1:0 ramdisk_size=4000
> l4linux | CPU mapping (l:p)[1]: 0:0
> l4linux | Image: 00400000 - 007d8000 [3936 KiB].
> l4linux | Areas: Text: 00400000 - 006dc000 [2928kB] (a bit longer)
> l4linux | Data: 006dc000 - 00706ac0 [170kB]
> l4linux | Initdata: 00709000 - 0072d000 [144kB]
> l4linux | BSS: 0072e000 - 007c2000 [592kB]
> l4linux | gs=43 fs=43
> l4linux | Device scan:
> l4linux | Device: L4ICU
> l4linux | Device: PCI0
> l4linux | Device: pci_l4x[0000]
> l4linux | PORT: 0000c040 - 0000c04f
> l4linux | PORT: 000001f0 - 000001f7
> l4linux | PORT: 000003f6 - 000003f6
> l4linux | IRQ: 0000000e - 0000000e
> l4linux | PORT: 00000170 - 00000177
> l4linux | PORT: 00000376 - 00000376
> l4linux | IRQ: 0000000f - 0000000f
> l4linux | Device: pci_l4x[0001]
> l4linux | IRQ: 0000000b - 0000000b
> l4linux | MEM: febc0000 - febdffff
> l4linux | PORT: 0000c000 - 0000c03f
> l4linux | Device scan done.
> l4linux | l4x_fiasco_gdt_entry_offset = 9
> l4linux | rtc not found
> l4linux | WARNING: RTC server does not seem to be there!
> l4linux | l4lx_thread_create: Created thread 417 (cpu0) (u:b3000e00,
> v:b3000c00, sp:006ddfac)
> l4linux | main thread will be 417
> l4linux | l4x_register_pointer_section: addr = 006dc000 size = 1032192
> l4linux | section-with-init: Virt: 0x6dc000 to 0x7d7fff [1008 KiB]
> l4linux | section-with-init: Phys: 0x0090f000 to 0x00a0afff, [1008 KiB]
> l4linux | Main thread running, waiting...
> l4linux | WARNING: Unknown wrmsr: 0000008b at 0x411f0d
> l4linux | L4x: Memory size: 64MB
> l4linux | L4x: Setting superpages for main memory
> l4linux | L4x: Adjusted memory start: 00400000
> l4linux | Main memory: Virt: 0x800000 to 0x47fffff [65536 KiB]
> l4linux | Main memory: Phys: 0x03400000 to 0x073fffff, [65536 KiB]
> l4linux | l4x: vmalloc area: 04800000 - 0c800000
> l4linux | Filling lower ptabs...
> l4linux | Done (1062 entries).
> l4linux | l4x_register_pointer_section: addr = 00400000 size = 2998272
> l4linux | text: Virt: 0x400000 to 0x6dbfff [2928 KiB]
> l4linux | text: Phys: 0x00614000 to 0x008effff, [2928 KiB]
> l4linux | Loading: rom/ramdisk-x86.rd
> l4linux | INITRD: Size of RAMdisk is 3072KiB
> l4linux | RAMdisk from 0c91b000 to 0cc1b000 [3072KiB]
> l4linux | rtc not found
> l4linux | l4lx_thread_create: Created thread 41f (timer0) (u:b3000a00,
> v:00000000, sp:0075bfa8)
> l4linux | WARNING: Unknown wrmsr: 0000008b at 0x411f0d
> l4linux | WARNING: Unknown rdmsr: 00000186 at 0x710579
> l4linux | WARNING: Unknown rdmsr: 00000187 at 0x710579
> l4linux | WARNING: Unknown wrmsr: 000000c1 at 0x71064a
> mag | Input: new pointer device (src='<Input_source userdata:
> 1D80C>' stream='userdata: 0x3abb4')
> mag | bus='i8042' vendor=0x2 product=0x6
> version=0
> mag | Input: new keyboard device (src='<Input_source userdata:
> 1D80C>' stream='userdata: 0x3b358')
> mag | bus='i8042' vendor=0x1 product=0x1
> version=43841
>
> And I printed my screen. See attached png-file.
>
> Thanks for any reply!
>
>
>
>
> _______________________________________________
> l4-hackers mailing list
> [email protected]
> http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
>
--
Matthias Lange, [email protected], +49 - 351 - 41 88 86 14
Kernkonzept GmbH. Sitz: Dresden. Amtsgericht Dresden, HRB 31129.
Geschäftsführer: Dr.-Ing. Michael Hohmuth
_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers