Re: Fwd: Running L4Linux + Fiasco on Freescale i.MX 6 Sabre SD

Hi,

On Fri Jul 03, 2015 at 14:42:35 +0200, Mahdi Aichouch wrote:
> However, there is still a problem after the mount of the root filesystem as
> shown below.
> 
> Do you have an idea of what might be wrong.

This tells us that the 'sh' is doing something wrong or triggers
something that makes it crash due to
a signal. Which ramdisk is this? One of mine? On the current one the pc
location has just a register move, so likely not the one. The PC value
is always the same of consecutive tries? Could you send me the /bin/sh
of the ramdisk you're using (private mail).


Adam

> RAMDISK: ext2 filesystem found at block 0
> RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
> EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
> EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
> VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
> Freeing unused kernel memory: 116K (02312000 - 0232f000)
> potentially unexpected fatal signal 4.
> 
> CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-l4 #3
> task: 05c23ac0 ti: 05c26000 task.ti: 05c26000
> PC is at 0xc4c0
> LR is at 0x0
> pc : [<0000c4c0>]    lr : [<00000000>]    psr: 00000010
> sp : bfa42ef0  ip : 00000000  fp : 00000000
> r10: 00000000  r9 : 00000000  r8 : 00000000
> r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : 00000000
> r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000000
> vcpu: b3000c00  vcpu-state: 00000001
> Flags: nzcv  IRQs on  FIQs on  Mode USER_32  ISA ARM  Segment user
> CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-l4 #3
> [<02000>] (unwind_backtrace) from [<02005924>] (show_stack+0x10/0x14)
> [<02005924>] (show_stack) from [<02028c50>]
> (get_signal_to_deliver+0x240/0x4cc)
> [<02028c50>] (get_signal_to_deliver) from [<02006fb4>]
> (do_signal+0x118/0x464)
> [<02006fb4>] (do_signal) from [<020073a0>] (do_work_pending+0xa0/0xe8)
> [<020073a0>] (do_work_pending) from [<02008d50>]
> (l4x_pre_iret_work.isra.31.part.32+0x60/0x104)
> [<02008d50>] (l4x_pre_iret_work.isra.31.part.32) from [<02009e38>]
> (l4x_vcpu_entry_c+0x274/0x1ddc)
> [<02009e38>] (l4x_vcpu_entry_c) from [<00000000>] (  (null))
> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
> 
> CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-l4 #3
> [<02000>] (unwind_backtrace) from [<02005924>] (show_stack+0x10/0x14)
> [<02005924>] (show_stack) from [<022486c0>] (panic+0x8c/0x1dc)
> [<022486c0>] (panic) from [<0201e0b0>] (complete_and_exit+0x0/0x1c)
> [<0201e0b0>] (complete_and_exit) from [<00000001>] (0x1)
> ---[ end Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x00000004
> 
> panic: going to sleep forever, bye
> panic: going to sleep forever, bye

-- 
Adam                 [email protected]
  Lackorzynski         http://os.inf.tu-dresden.de/~adam/