Re: U-Boot version issue

On Wed Oct 07, 2015 at 18:59:17 +0200, ba_f wrote:
> i have an issue with different U-Boot versions, and i have no clue what's
> the problem.
> Maybe someone's got an idea?
> 
> Working on Xilinx' ARM Platform i use U-Boot version
> u-boot-xlnx-xilinx-v14.6.01, and it's all good with that one and lower
> versions.
> But, using u-boot-xlnx-xilinx-v14.7 or higher results in serious CPU errors:
> 
> uboot> fatload mmc 0 0x00ffffc0 bootstrap.uimage
> reading bootstrap.uimage
> 6139968 bytes read in 528 ms (11.1 MiB/s)
> uboot> go 0x01000000
> ## Starting application at 0x01000000 ...
> undefined instruction
> pc : [<01000004>]	   lr : [<3ff74bc0>]
> sp : 3fb51e08  ip : 00002802	 fp : 00000000
> r10: 3fb572d8  r9 : 00000002	 r8 : 3fb51f40
> r7 : 3ffaff50  r6 : 01000000	 r5 : 3fb572dc  r4 : 00000002
> r3 : 01000000  r2 : 3fb572dc	 r1 : 3fb572dc  r0 : 00000001
> Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
> Resetting CPU ...
> 
> 
> Unfortunately, the DIFF between v14.6 and v14.7 is 60'000 lines...
> 
> Is there any chance to fix that?

The pc where it traps is (shall be) a NOP and definitely not an
undefined instruction. You could check after the fatload whether the
contents in memory (via md in u-boot) and in the binary are the same at
that location (0x01000004).



Adam
-- 
Adam                 [email protected]
  Lackorzynski         http://os.inf.tu-dresden.de/~adam/