Re: Sharing one ethernet network device between two L4Linux instances
Mahdi Aichouch <[email protected]>
| Newsgroups | gmane.comp.micro-kernel.l4.devel |
|---|---|
| Message-ID | <CAGBLRX4YCVLCkckZGCo66t+YT21fgiqO=i3OK6gZpvoxKxF9bg@mail.gmail.com> |
Hello Martin,
Thank you very much for your help! The "cons multiplixer" and "L4Shmnet"
services are working perfectly.
Below is the trace of a test case:
l4linux | Please press Enter to activate this console.
l4linux2|
l4linux2| Please press Enter to activate this console.
cons> help
cat - Dump buffer of channel
clear - Clear screen
connect - Connect to channel
drop - Drop kept client
grep - Search for text
help - Help screen
hide - Hide channel output
hideall - Hide all channels output
info - Info screen
keep - Keep client from garbage collection
key - Set key shortcut for channel
list - List channels
show - Show channel output
showall - Show all channels output
tail - Show last lines of output
timestamp - Prefix log with timestamp
Key shortcuts when connected:
Ctrl-E . - Disconnect
Ctrl-E e - Inject Ctrl-E
Ctrl-E c - Inject Ctrl-C
Ctrl-E q - Inject ESC
Ctrl-E l - Inject Break sequence
Global key shortcuts:
Ctrl-E h - Hide all output (except current)
Ctrl-E s - Show all output
User defined key shortcuts:
Ctrl-E 2 - Connect to console 'l4linux2'
Ctrl-E 1 - Connect to console 'l4linux'
cons>
cons> ------------- Connecting to 'l4linux' -------------
Freeing unused kernel memory: 164K (02362000 - 0238b000)
mount: mounting proc on /proc failed: Device or resource busy
mount: mounting devtmpfs on /dev failed: No such device
Page fault: addr = 00082001 pc = a800632c (ro, T)
Forward PF to our pager
Page fault: addr = 0008203a pc = 021ddcec (rw)
Forward PF to our pager
net eth0: L4ShmNet established, with 52:54:00:b0:cf:01, IRQ 212
Please press Enter to activate this console.
/ # uname -a
Linux l4box 3.16.0-l4 #38 SMP Tue Oct 27 15:21:29 CET 2015 armv7l GNU/Linux
/ # ifconfig
eth0 Link encap:Ethernet HWaddr 52:54:00:B0:CF:01
inet addr:192.168.50.1 Bcast:192.168.50.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:7710 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:212
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/ # ip addr add 10.10.10.1/24 broadcast 10.10.10.255 dev eth0
/ # ifconfig eth0 up
/ #
------------- Connecting to 'l4linux2' -------------
RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 164K (02362000 - 0238b000)
mount: mounting proc on /proc failed: Device or resource busy
mount: mounting devtmpfs on /dev failed: No such device
Please press Enter to activate this console.
/ # ip addr add 10.10.10.2/24 broadcast 10.10.10.255 dev eth0
/ # ifconfig eth0 up
/ # ping -c3 10.10.10.1
PING 10.10.10.1 (10.10.10.1): 56 data bytes
64 bytes from 10.10.10.1: seq=0 ttl=64 time=23.000 ms
64 bytes from 10.10.10.1: seq=1 ttl=64 time=4.000 ms
64 bytes from 10.10.10.1: seq=2 ttl=64 time=3.000 ms
--- 10.10.10.1 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 3.000/10.000/23.000 ms
/ #
- Regarding the attribution of a direct network access to one L4Linux:
*"I fear that it is currently not possible to configure this network
interface on l4linux for vexpress-a9. QEMU (v2.4.0.1) supports lan9118 only
but the l4linux smsc911x.c requires CONFIG_OF in smsc911x_probe_config_dt.
But configuring via DT is not yet fully working in
l4re-snapshot-2014092821."*
Given your above advice, and given that at the end of my project the
application have to run on the Freescale i.MX 6 Sabre SD board, and given
that there was a previous work [1] [2] done by Taeung Song to port of the
FEC Ethernet device driver to L4 Fiasco + L4Linux
(l4re-snapshot-2014022818), I think that it would be better to use the
previous work of Taeung on the "l4re-snapshot-2014092821".
My question is: does the work of Taeung have been integrated into the l
4re-snapshot-2014092821?
If not, what would be the difficulties that I have to pay attention to if I
would like to adapt his work to l4re-snapshot-2014092821, is there any
incompatibilities between his work and the l4re-snapshot-2014092821?
Does the "cons multiplexer + L4Shmnet" services still run as it is the case
now, if one L4Linux instance has direct access to a physical network device
and acts as a router for the second L4Linux instance?
Thank you very much in advance for you answer.
Best regards,
Mahdi
[1] http://os.inf.tu-dresden.de/pipermail/l4-hackers/2014/006601.html
[2] http://os.inf.tu-dresden.de/pipermail/l4-hackers/2014/006462.html
On Fri, Oct 23, 2015 at 10:48 AM, Mahdi Aichouch <[email protected]> wrote:
> Hello Matthias,
>
> Thank you very much for your explanation.
>
> Following your advice, I tried to set a direct access to a network device
> for the first L4Linux instance.
> However, when I run "ifconfig" command in L4Linux shell I don't get any
> working eth0 configuration, the result is shown below:
>
> - L4Linux on Qemu
>
> / # ifconfig
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:65536 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> I tested the "ifconfig" command an a Linux running the same Qemu
> vexpress-a9 configuration and I get an eth0 configuration as shown below:
>
> - Linux on Qemu:
>
> / # ifconfig
> eth0 Link encap:Ethernet HWaddr 52:54:00:12:34:56
> inet addr:192.168.50.1 Bcast:192.168.50.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:47
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:65536 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
>
> For the logs of L4Linux I can see that the IO server prints a warning
> saying that "Service registration failed: 'l4lx' ".
> Do you have an idea of what might be wrong.
> My Lua and IO configuration files are given below after the L4Linux boot
> logs.
>
>
> l4linux | L4re_kernel main Hello world !
> l4linux | ARGC=13
> l4linux | ARGV=b1007e04
> l4linux | ENVP=b1007e3c
> l4linux | AUXP=b1007e40
> l4linux | arg: 'rom/vmlinuz.arm'
> l4linux | arg: 'earlyprintk=1'
> l4linux | arg: 'showpfexc=1'
> l4linux | arg: 'showghost=1'
> l4linux | arg: 'mem=64M'
> l4linux | arg: 'l4shmnet.add=shmns,macpart=1,create'
> l4linux | arg: 'console=ttyLv0'
> l4linux | arg: 'l4x_rd=rom/ramdisk-arm.rd'
> l4linux | arg: 'root=1:0'
> l4linux | arg: 'ramdisk_size=4000'
> l4linux | arg: 'init=/linuxrc'
> l4linux | arg: 'print-fatal-signals=1'
> l4linux | arg: 'ip=dhcp'
> l4linux | l4re_kernel: Single_page_alloc_base::_alloc heap p= 0 addr =
> b0100000
> l4linux | Region maping: limits [0-bfffffff]
> l4linux | Area map:
> l4linux | [ 0- fff] -> flags=0
> l4linux | Region map:
> l4linux | [ affff000- afffffff] -> (offs=0, ds=5000, flags=4)
> l4linux | [ b0000000- b0019fff] -> (offs=0, ds=5000, flags=4)
> l4linux | [ b0020000- b0026fff] -> (offs=0, ds=5000, flags=4)
> l4linux | [ b0100000- b013ffff] -> (offs=0, ds=5000, flags=4)
> l4linux | [ b1000000- b1007fff] -> (offs=0, ds=5000, flags=4)
> l4linux | [ b3000000- b3000fff] -> (offs=0, ds=5000, flags=4)
> l4linux | l4re_kernel -> Loader::start binary dataspace [phys @addr =
> 612d6000] size = [3c9498]
> l4linux | l4re_kernel: Loader::start start file [C:11000]
> CPU[0]: run(thread=4c, cpu=0 (1,0,24)
> l4linux | l4re_kernel: Loader::start start thread [C:11000]
> CPU[0]: run(thread=49, cpu=0 (1,0,24)
> l4linux | l4re_kernel: Loader::loader_thread execute
> l4linux | l4re_kernel: Loader::__start execute
> l4linux | l4re_kernel::Elf_Loader::launch bin: 1
> l4linux | l4re_kernel -> Elf_loader::launch binary dataspace [phys @addr =
> 612d6000] size = [3c9498]
> l4linux | l4re_kernel: Loader::alloc_app_stack size = 1000 stack virtual
> addr afff4000
> l4linux | l4re_kernel: Loader::alloc_app_stack stack dataspace phys addr =
> 60451000 size = 1000
> l4linux | Elf::load addr= (nil), interpreter= 0
> l4linux | Phdr_load: map from file (attaching ro ELF text segment),
> prog_attach_ds [paddr = 0xa8000000 (0xa8000000), offs 0, size 3960832 ,all
> seg cow? 0]
> l4linux | l4re_kernel: L4Re_app_model::alloc_ds dataspace phys @addr =
> [b0201dfc] size = [b00113f8] flags 0
> l4linux | Phdr_load: copy data section: prog_attach_ds [paddr = 0xa83c8000
> (0xa83c8000), offs 3964928, size 8192, all seg cow? 0]
> l4linux | Phdr_load: created dataspace phys addr = 0xb0201e54, size =
> b00111cc
> l4linux | Elf::load app model...done
> l4linux | libio: Warning: Query of 'vbus' failed!
> l4linux | PH 0 (t: 1) offs=00008000 vaddr=02000000 vend=02476414
> l4linux | phys=02000000 ephys=02476414
> l4linux | f_sz=003b039c memsz=00476414 flgs=rwx
> l4linux | L4LINUX: Ma DBG: Virtual Address 02000000 End 02476414
> l4linux | Physical Address 02000000 End 02476414
> IO | Io service
> copy on write for 6124f000 to 608cb000
> IO | Verboseness level: 4
> IO | unused physical memory space:
> IO | [00000000000000-0000005fffffff]
> IO | [00000070000000-000000ffffffff]
> IO | Loading: config 'rom/arm-ve-a9.io'
> MOE: R[600ebe60]: refs=1
> IO | WARNING: Service registration failed: 'l4lx'
> IO | l4lx: [N12_GLOBAL__N_112Virtual_sbusE]
> IO | Resources: ==== start ====
> IO | Resources: ===== end =====
> IO | L4ICU: [N2Vi6Sw_icuE]
> IO | Resources: ==== start ====
> IO | Resources: ===== end =====
> IO | NIC: [N2Vi9Proxy_devE]
> IO | Resources: ==== start ====
> IO | IOMEM [00000002000000-00000002ffffff 1000000] non-pref
> (32bit) (align=ffffff flags=2)
> IO | IRQ [0000000000000f-0000000000000f 1] none (32bit)
> (align=0 flags=1)
> IO | Resources: ===== end =====
> IO | Real Hardware -----------------------------------
> IO | System Bus: hid=
> IO | Resources: ==== start ====
> IO | Resources: ===== end =====
> IO | NIC: hid=smsc9118
> IO | Clients: ===== start ====
> IO | NIC: [N2Vi9Proxy_devE]
> IO | Clients: ===== end ====
> IO | Resources: ==== start ====
> IO | IOMEM [00000002000000-00000002ffffff 1000000] non-pref
> (32bit) (align=ffffff flags=2)
> IO | IRQ [0000000000000f-0000000000000f 1] none (32bit)
> (align=0 flags=1)
> IO | Resources: ===== end =====
> IO | warning: could not register control interface at cap
> 'platform_ctl'
> IO | Ready. Waiting for request.
> l4linux | PH 1 (t: 4) offs=00360490 vaddr=02358490 vend=023584b4
> l4linux | phys=02358490 ephys=023584b4
> l4linux | f_sz=00000024 memsz=00000024 flgs=r-x
> l4linux | L4LINUX: Ma DBG: Virtual Address 02358490 End 023584b4
> l4linux | Physical Address 02358490 End 023584b4
> l4linux | PH 2 (t: 1685382481) offs=00000000 vaddr=00000000 vend=00000000
> l4linux | phys=00000000 ephys=00000000
> l4linux | f_sz=00000000 memsz=00000000 flgs=rwx
> l4linux | L4LINUX: Ma DBG: Virtual Address 00000000 End 00000000
> l4linux | Physical Address 00000000 End 00000000
> l4linux | L4LINUX: Ma DBG: Starting binary at 0x2000360, argc=13
> argv=0xafff4f64 *argv=0xb1007ff0 argv0=rom/vmlinuz.arm
> l4linux | External resolver is at 0xa800075c
> l4linux | ======> L4Linux starting... <========
> l4linux | Linux version 3.16.0-l4 (aichouch@aichouch-ThinkCentre-M90)
> (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite
> 2014.05-29) ) #35 SMP Tue Oct 20 17:04:31 CEST 2015
> l4linux | Binary name: rom/vmlinuz.arm
> l4linux | This is an AEABI build.
> l4linux | Linux kernel command line (12 args): earlyprintk=1 showpfexc=1
> showghost=1 mem=64M l4shmnet.add=shmns,macpart=1,create console=ttyLv0
> l4x_rd=rom/ramdisk-arm.rd root=1:0 ramdisk_size=4000 init=/linuxrc
> print-fatal-signals=1 ip=dhcm
> l4linux | CPU mapping (l:p)[1]: 0:0
> l4linux | Image: 020000a0 - 02600000 [6143 KiB].
> l4linux | Areas: Text: 020000a0 - 02384000 [3599kB] (a bit longer)
> l4linux | Data: 02384000 - 023abc20 [159kB]
> l4linux | Initdata: 02359000 - 02382900 [166kB]
> l4linux | BSS: 023b039c - 02476414 [792kB]
> l4linux | Device scan:
> l4linux | Device scan done.
> l4linux | L4LINUX: Ma DBG: l4lx_thread_create: Created thread 413 (cpu0)
> (u:b3000e00, v:b3000c00, sp:02385fa4)
> l4linux | main thread will be 413
> l4linux | l4x_register_pointer_section: addr = 02000000 size = 4681728
> l4linux | section-with-init: Virt: 0x2000000 to 0x2476413 [4569 KiB]
> l4linux | section-with-init: Phys: 0x60454000 to 0x608ca413, [4569 KiB]
> CPU[0]: run(thread=54, cpu=0 (1,0,0)
> l4linux | Main thread running, waiting...
> l4linux | Main thread running, waiting...
> l4linux | stext virt 020000a0, phys 604540a0
> l4linux | etext virt 02384000, phys 607d8000
> l4linux | L4x: Memory size: 64MB
> l4linux | L4x: Setting superpages for main memory
> l4linux | L4x: Adjusted memory start: 02000000
> l4linux | Main memory: Virt: 0x2600000 to 0x65fffff [65536 KiB]
> l4linux | Main memory: Phys: 0x61a00000 to 0x659fffff, [65536 KiB]
> l4linux | l4x: vmalloc area: 06600000 - 0e600000
> l4linux | l4x_register_pointer_section: addr = 02000000 size = 4681728
> l4linux | text: Virt: 0x2000000 to 0x2476413 [4569 KiB]
> l4linux | text: Phys: 0x60454000 to 0x608ca413, [4569 KiB]
> l4linux | Booting Linux on physicl CPU 0x0
> Linux version 3.16.0-l (aichouch@aichouch-Thin [Centre-M90) (gcc versionm
> 4.8.3 20140320 (prerelease) (Sourcery CodeBenc Lite 2014.05-29) ) #35 [MP
> Tue Oct 20 17:04:31 CmEST 2015
> CPU: Fiasco [410fc090]revision 0 (ARMv7), cr=0 [000000
> CPU: PIPT / VIPT nonalasing data cache, VIPT n [naliasing instruction
> camche
> Machine: L4
> Ignoring unrecognised ag 0x00000000
> bootconsole [earlykdb0 enabled
> Forcing write-allocatecache policy for SMP
> Forcing shared mapping for SMP
> Memory policy: Data cahe writealloc
> Page fault: addr = bffff003 pc = 0235cb80 (rw, T)
> l4linux | Forward PF to our pager
> l4linux | Loading: rom/ramdisk-arm.rd
> l4linux | INITRD: Size of RAMdisk is 3072KiB
> l4linux | INITRD: 00002000 - 0030000
> l4x_virt_to_phys: Could not translate virt. address 0x2000
> l4linux | v2p: 0: v:00000000-00001000 p:00000000-00001000 sz:00001000
> l4linux | v2p: 1: v:02000000-02476414 p:60454000-608ca414 sz:00476414
> l4linux | v2p: 2: v:02600000-06600000 p:61a00000-65a00000 sz:04000000
> l4linux | v2p: 3: v:02000000-02476414 p:60454000-608ca414 sz:00476414
> l4linux | ------------[ cut here ------------
> WARNING: CPU: 0 PID: 0at /home/aichouch/dev/l4 [e-snapshot-2014092821/srmc/l4linux/arch/l4/kernel/main.c:392
> l4x_virt_tophys+0x7c/0xac()
> Modules linked in:
> CPU: 0 PID: 0 Comm: swpper Not tainted 3.16.0- [4 #35
> [<02010164>] (unwind_bcktrace) from [<02006ee4 [] (show_stack+0x10/0x14)m
> [<02006ee4>] (show_stak) from [<022811d4>] (du [p_stack+0x84/0x94)
> [<022811d4>] (dump_stak) from [<02020c14>] (wa
> [n_slowpath_common+0x6c/0mx88)
> [<02020c14>] (warn_slopath_common) from [<0202 [ccc>]
> (warn_slowpath_nulml+0x1c/0x24)
> [<02020ccc>] (warn_slopath_null) from [<020021 [8>]
> (l4x_virt_to_phys+0xm7c/0xac)
> [<02002168>] (l4x_virtto_phys) from [<0235bf4c []
> (l4x_load_initrd+0x208m/0x240)
> [<0235bf4c>] (l4x_loadinitrd) from [<0235d860> [ (setup_arch+0x89c/0x8d4m)
> [<0235d860>] (setup_arh) from [<023595c8>] (st [rt_kernel+0x8c/0x370)
> [<023595c8>] (start_kenel) from [<00000000>] ( [ (null))
> ---[ end trace 3406ff2bd97382e ]---
> l4x_virt_to_phys: Could not translate virt. address 0x302000
> l4linux | v2p: 0: v:00000000-00001000 p:00000000-00001000 sz:00001000
> l4linux | v2p: 1: v:02000000-02476414 p:60454000-608ca414 sz:00476414
> l4linux | v2p: 2: v:02600000-06600000 p:61a00000-65a00000 sz:04000000
> l4linux | v2p: 3: v:02000000-02476414 p:60454000-608ca414 sz:00476414
> l4linux | ------------[ cut here ------------
> WARNING: CPU: 0 PID: 0at /home/aichouch/dev/l4 [e-snapshot-2014092821/srmc/l4linux/arch/l4/kernel/main.c:392
> l4x_virt_tophys+0x7c/0xac()
> Modules linked in:
> CPU: 0 PID: 0 Comm: swpper Tainted: G W [ 3.16.0-l4 #35
> [<02010164>] (unwind_bcktrace) from [<02006ee4 [] (show_stack+0x10/0x14)m
> [<02006ee4>] (show_stak) from [<022811d4>] (du [p_stack+0x84/0x94)
> [<022811d4>] (dump_stak) from [<02020c14>] (wa
> [n_slowpath_common+0x6c/0mx88)
> [<02020c14>] (warn_slopath_common) from [<0202 [ccc>]
> (warn_slowpath_nulml+0x1c/0x24)
> [<02020ccc>] (warn_slopath_null) from [<020021 [8>]
> (l4x_virt_to_phys+0xm7c/0xac)
> [<02002168>] (l4x_virtto_phys) from [<0235bf58 []
> (l4x_load_initrd+0x214m/0x240)
> [<0235bf58>] (l4x_loadinitrd) from [<0235d860> [ (setup_arch+0x89c/0x8d4m)
> [<0235d860>] (setup_arh) from [<023595c8>] (st [rt_kernel+0x8c/0x370)
> [<023595c8>] (start_kenel) from [<00000000>] ( [ (null))
> ---[ end trace 3406ff2bd97382f ]---
> RAMdisk from 00002000 (00002000) to 00302000 (00302000) [3072KiB]
> l4linux | PERCPU: Embedded 7 page/cpu @06521000 s6400 r81 [2 d14080 u32768
> Built 1 zonelists in Zne order, mobility group [ng on. Total pages: 177m16
> Kernel command line: erlyprintk=1 showpfexc=1 [howghost=1 mem=64M
> l4shmmnet.add=shmns,macpart=1,create console=ttyLv0
> lx_rd=rom/ramdisk-arm.rd [oot=1:0 ramdisk_size=400m0 init=/linuxrc
> print-fatal-signals=1 ip=dhcp
> l4shmnet: unknown arguent: create
> L4LINUX CEA version PI hash table entries: 512 [(order: -1, 2048 bytes)
> Dentry cache hash tabl entries: 16384 (order: [, 65536 bytes)
> Inode-cache hash tableentries: 8192 (order: 3, [32768 bytes)
> Memory: 64776K/71680K vailable (2681K kernel c [de, 159K rwdata, 744K
> romdata, 166K init, 792K bss, 6904K reserved)
> Virtual kernel memory ayout:
> vector : 0xbffff00 - 0xc0000000 ( 4 k [)
> fixmap : 0xffc0000 - 0xffe00000 (2048 k [)
> vmalloc : 0x0660000 - 0x0e600000 ( 128 M [)
> lowmem : 0x0000000 - 0x06600000 ( 102 M [)
> modules : 0x0101000 - 0x02000000 ( 15 M [)
> .text : 0x0200000 - 0x023584b4 (3426 k [)
> .init : 0x0235900 - 0x02382900 ( 167 k [)
> .data : 0x0238400 - 0x023abc20 ( 160 k [)
> .bss : 0x023b03c - 0x02476414 ( 793 k [)
> Hierarchical RCU impleentation.
> l4linux RCU restricting CPUs rom NR_CPUS=4 to nr_cpu_ [ds=1.
> RCU: Adjusting geometr for rcu_fanout_leaf=16, [nr_cpu_ids=1
> NR_IRQS:220
> l4timer: Using IRQ210
> KERNEL: Ma DBG: Context constructor
> KERNEL: Ma DBG: Thread ARM constructor VA=0xf1175000 Physical
> Address=0x6fd75000
> KERNEL: Ma DBG: thread_object: sys_control: result 0
> L4LINUX: Ma DBG: l4lx_thread_create: Created thread 419 (timer0)
> (u:b3000a00, v:00000000, sp:0240dfa0)
> CPU[0]: run(thread=59, cpu=0 (1,0,0)
> KERNEL: Ma DBG: KERNEL-268396848: thread-arm::user_invoke()
> l4linux | sched_clock: 64 bits at1000kHz, resolution 1000 [s, wraps every
> 214748364m8000ns
> Console: colour dummy evice 80x30
> console [ttyLv0] enabled
> console [ttyLv0] enabld
> bootconsole [earlykdb0] disabled
> bootconsole [earlykdb0 disabled
> Calibrating delay loop... 523.46 BogoMIPS (lpj=2617344)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
> Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
> CPU: Testing write buffer coherency: ok
> CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> Setting up static identity map for 0x2286740 - 0x2286740
> Brought up 1 CPUs
> SMP: Total of 1 processors activated.
> CPU: All CPU(s) started in SVC mode.
> VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0
> NET: Registered protocol family 16
> DMA: preallocated 256 KiB pool for atomic coherent allocations
> Switched to clocksource l4kipclk
> NET: Registered protocol family 2
> TCP established hash table entries: 1024 (order: 0, 4096 bytes)
> TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
> TCP: Hash tables configured (established 1024 bind 1024)
> TCP: reno registered
> UDP hash table entries: 256 (order: 1, 8192 bytes)
> UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> NET: Registered protocol family 1
> Trying to unpack rootfs image as initramfs...
> rootfs image is not initramfs (junk in compressed archive); looks like an
> initrd
> INITRD: Freeing memory.
> l4x: Checks passed.
> NetWinder Floating Point Emulator V0.97 (double precision)
> futex hash table entries: 256 (order: 2, 16384 bytes)
> msgmni has been set to 126
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> L4 serial driver
> ttyLv0 at MMIO 0x1 (irq = 211, base_baud = 230400) is a L4
> l4ser_shm: L4 shared mem serial driver
> l4cdds: No name given, not starting.
> brd: module loaded
> l4bdds: No name given, not starting.
> shmns: Requesting, Shmsize 1024 Kbytes
> shmns: Failed to establish communication
> mousedev: PS/2 mouse device common for all mice
> TCP: cubic registered
> NET: Registered protocol family 17
> RAMDISK: ext2 filesystem found at block 0
> RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
> EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
> EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
> VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
> Freeing unused kernel memory: 164K (02359000 - 02382000)
> Please press Enter to activate this console.
>
>
> - lua configuration file:
>
> -- vim:set ft=lua:
>
> loader = L4.default_loader;
> vbus_l4linux = loader:new_channel();
>
> local lxname = "vmlinuz";
> if L4.Info.arch() == "arm" then
> lxname = "vmlinuz.arm";
> end
>
> local shmns = L4.default_loader:create_namespace({ shm = "placeholder" });
>
> loader:start(
> {
> caps = {
> sigma0 = L4.cast(L4.Proto.Factory,
> L4.Env.sigma0):create(L4.Proto.Sigma0);
> icu = L4.Env.icu;
> l4linux = vbus_l4linux:svr();
> },
>
> log = { "IO", "y" },
>
> l4re_dbg = L4.Dbg.Warn,
> },
> "rom/io -vvv rom/arm-ve-a9.io");
>
> L4.default_loader:start(
> {
> { ldr_flags = L4.Ldr_flags.pinned_segs, L4.Ldr_flags.eager_map },
> caps = {
> log = L4.Env.log:m("rws"),
> },
> l4re_dbg = L4.Dbg.Warn,
> log = { "l4linux", "yellow" },
>
> shmns = shmns:mode("rw"),
> },
> "rom/" .. lxname .. " earlyprintk=1 showpfexc=1 showghost=1 mem=64M
> l4shmnet.add=shmns,macpart=1,create console=ttyLv0 l4x_rd=rom/ramdisk-" ..
> L4.Info.arch() .. ".rd root=1:0 ramdisk_size=4000 init=/lin\
> uxrc print-fatal-signals=1 ip=dhcp");
>
>
> - IO server configuration file:
>
> hw-root
> {
> NIC => new Device()
> {
> .hid = "smsc9118";
> new-res Mmio(0x02000000 .. 0x02FFFFFF);
> new-res Irq(15);
> }
> }
>
> l4lx => new System_bus()
> {
> NIC => wrap(hw-root.NIC);
> }
>
>
> *One possible solution would be to grant one L4Linux
> instance access to the physical device and setup a virtual network
> connection between the two instances. Then you can e.g. use iptables to
> setup forwarding and NAT to route traffic from the second instance.*
>
> Regarding the setting of a virtual network connection and iptables, could
> you please share a document or some instructions that explain how to setup
> such a working configuration.
>
> Regarding the use of the "cons multiplexer", if I understood correctly I
> should use it instead of "l4shmns" service, right?
> If yes, do I have to disable the support of "l4shmns" option in L4Linux
> and remove all configuration from my Lua configuration file?
>
> Could you please share a document or some instructions that explain how to
> use the "cons multiplexer".
>
> Thank you very much for your help.
>
> Best regards,
>
> Mahdi
>
>
>
>
>
>
> On Thu, Oct 22, 2015 at 10:28 AM, Matthias Lange <
> [email protected]> wrote:
>
>> Hi,
>>
>> On 10/21/2015 02:34 PM, Mahdi Aichouch wrote:
>> > Hello,
>> >
>> > I was able to run two L4linux instances on top of L4 Fiasco OC using a
>> > Qemu emulator of a versatile express-a9 board .
>> >
>> > I would like to make these two instances share one ethernet network
>> device.
>>
>> To share a device you need a multiplexer which has access to the
>> physical device (and drives it) and provide a virtual device for each of
>> the clients. One possible solution would be to grant one L4Linux
>> instance access to the physical device and setup a virtual network
>> connection between the two instances. Then you can e.g. use iptables to
>> setup forwarding and NAT to route traffic from the second instance.
>>
>> > I would like also to switch between the two L4Linux shell, because in
>> > Qemu only one shell is accessible.
>>
>> For that you can use 'cons' our console multiplexer.
>>
>> > I followed this guide[1] to connect two L4Linux instances using
>> > "l4shmnet", and this thread [2]
>> > to get access to the shell when testing on Qemu.
>> >
>> > However, the "l4shmnet" is not working correctly, both L4Linux display
>> > this message:
>>
>> Maybe this is a memory issue? You assign 1GB to the machine but only
>> hand 64M to L4Linux (of which 32M are taken by the ramdisk).
>>
>> Matthias
>>
>> > shmns: Requesting, Shmsize 1024 Kbytes
>> > shmns: Failed to establish communication
>> >
>> > Could someone help me building such a working configuration.
>> >
>> > Is it possible to share a working Qemu command with the right option for
>> > the network?
>> > This is my Qemu command
>> >
>> > $> qemu-system-arm -cpu cortex-a9 -M vexpress-a9 -smp 1 -no-reboot -m
>> > 1024M -kernel bin/arm_armv7a/bootstrap_L4Linux_ARM.elf -nographic -net
>> > nic,model=lan9118 -net user
>> >
>> > Is it also possible to share a working lua configuration file?
>> >
>> > This is my lua l4lx.cfg file:
>> >
>> > -- vim:set ft=lua:
>> >
>> > local lxname = "vmlinuz";
>> > if L4.Info.arch() == "arm" then
>> > lxname = "vmlinuz.arm";
>> > end
>> >
>> > local shmns = L4.default_loader:create_namespace({ shm = "placeholder"
>> });
>> >
>> > L4.default_loader:start(
>> > {
>> > { ldr_flags = L4.Ldr_flags.eager_map },
>> > caps = {
>> > log = L4.Env.log:m("rws"),
>> > },
>> > l4re_dbg = L4.Dbg.Warn,
>> > log = { "l4linux", "yellow" },
>> >
>> > shmns = shmns:mode("rw"),
>> > },
>> > "rom/" .. lxname .. " earlyprintk=1 showpfexc=1 showghost=1 mem=64M
>> > l4shmnet.add=shmns,macpart=1,create console=ttyLv0 l4x_rd=rom/ramdisk-"
>> > .. L4.Info.arch() .. ".rd root=1:0 ramdisk_size=32768 init=/li\
>> > nuxrc print-fatal-signals=1");
>> >
>> > L4.default_loader:start(
>> > {
>> > { ldr_flags = L4.Ldr_flags.eager_map },
>> > caps = {
>> > log = L4.Env.log:m("rws"),
>> > },
>> > l4re_dbg = L4.Dbg.Warn,
>> > log = { "l4linux2", "green" },
>> >
>> > shmns = shmns:mode("rw"),
>> > },
>> > "rom/" .. lxname .. " earlyprintk=1 showpfexc=1 showghost=1 mem=64M
>> > l4shmnet.add=shmns,macpart=2 console=ttyLv0 l4x_rd=rom/ramdisk-" ..
>> > L4.Info.arch() .. ".rd root=1:0 ramdisk_size=32768 init=/linuxrc p\
>> > rint-fatal-signals=1");
>> >
>> >
>> > Thank you very much in advance.
>> > Best regards,
>> >
>> > Mahdi
>> >
>> >
>> > [1] http://wiki.tudos.org/L4Linux/shmnet
>> > [2] http://os.inf.tu-dresden.de/pipermail/l4-hackers/2013/005775.html
>>
>
>
_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers