Porting i.MX6 FEC ethernet device driver to L4Linux (l4re-snapshot-2014092821)
Mahdi Aichouch <[email protected]>
| Newsgroups | gmane.comp.micro-kernel.l4.devel |
|---|---|
| Message-ID | <CAGBLRX7kujy-fU79u2yTgSUWnoH3FB6FF3YoXjYwXMw-uGCo6A@mail.gmail.com> |
Hello,
Starting from a previous work [1] , I ported the i.MX6 FEC ethernet device
driver to L4Linux (l4re-snapshot-2014092821).
There is no compilation error, but when I tested on the Freescale i.MX6
Sabre SDB, it seems that L4Linux does not start the device. Below are the
boot messages of L4 Fiasco + L4Linux.
Does someone have an idea of what might be missing or wrong.
To reproduce the test case using l4re-snapshot-2014092821, all
configuration files and patches are given below.
Thank you very much in advance.
Best regards,
Mahdi
[1] http://os.inf.tu-dresden.de/pipermail/l4-hackers/2014/006462.html
L4 Bootstrapper
Build: #10 Thu Oct 29 12:00:00 CET 2015, 4.8.3 20140320 (prerelease)
Scanning up to 1024 MB RAM, starting at offset 32MB
Memory size is 1024MB (10000000 - 4fffffff)
RAM: 0000000010000000 - 000000004fffffff: 1048576kB
Total RAM: 1024MB
Scanning fiasco
Scanning sigma0
Scanning moe
Moving up to 10 modules behind 11100000
moving module 02 { 11928000-1196163f } -> { 11a18000-11a5163f } [235072]
moving module 01 { 1191e000-1192738b } -> { 11a0e000-11a1738b } [37772]
moving module 00 { 118b8000-1191d98b } -> { 119a8000-11a0d98b } [416140]
moving module 09 { 115b8000-118b7fff } -> { 116a8000-119a7fff } [3145728]
moving module 08 { 111d6000-115b7497 } -> { 112c6000-116a7497 } [4068504]
moving module 07 { 111d5000-111d517b } -> { 112c5000-112c517b } [380]
moving module 06 { 1107e000-111d446f } -> { 1116e000-112c446f } [1401968]
moving module 05 { 1107d000-1107d35b } -> { 1116d000-1116d35b } [860]
moving module 04 { 1102a000-1107cc1f } -> { 1111a000-1116cc1f } [338976]
moving module 03 { 11010000-11029473 } -> { 11100000-11119473 } [103540]
Loading fiasco
Loading sigma0
Loading moe
find kernel info page...
found kernel info page at 0x10002000
Regions of list 'regions'
[ 10000000, 1000015f] { 160} Root mbi_rt
[ 10001000, 10001aff] { b00} Kern fiasco
[ 10002000, 10072fff] { 71000} Kern fiasco
[ 10090000, 10096edf] { 6ee0} Sigma0 sigma0
[ 10098000, 1009e177] { 6178} Sigma0 sigma0
[ 10140000, 10171d77] { 31d78} Root moe
[ 10178000, 101934ab] { 1b4ac} Root moe
[ 11000000, 1100f58f] { f590} Boot bootstrap
[ 11100000, 119a7fff] { 8a8000} Root Module
API Version: (87) experimental
Sigma0 config ip:10090100 sp:00000000
Roottask config ip:10140260 sp:00000000
Starting kernel fiasco at 100012c8
Hello from Startup::stage2
Per_cpu_data_alloc: (orig: 0xf0062390-0xf0062d58)
Number of IRQs available at this GIC: 160
FPU0: Arch: VFPv3(3), Part: VFPv3(30), r: 4, v: 9, i: 41, t: hard, p:
dbl/sngl
L2: ID=410000c7 Type=9e340340 Aux=32070000 WMask=ffff S=0
L2: Type L2C-310 Size = 1024kB Ways=16 Waysize=64
GIC: Switching IRQ 9 to secure
GIC: Switching IRQ 8 to secure
GIC: Switching IRQ 10 to secure
GIC: Switching IRQ 11 to secure
GIC: Switching IRQ 58 to secure
SERIAL ESC: allocated IRQ 58 for serial uart
Not using serial hack in slow timer handler.
Welcome to Fiasco.OC (arm)!
L4/Fiasco.OC arm microkernel (C) 1998-2013 TU Dresden
Rev: rexported compiled with gcc 4.8.3 for i.MX6 []
Build: #173 Thu Oct 29 11:16:01 CET 2015
Per_cpu_data_alloc: (orig: 0xf0062390-0xf0062d58)
KERNEL: Warning: Buddy::alloc: Size mismatch: 9c8 v 1000
Allocate 2504 bytes (2KB) for CPU[4] local storage (offset=1187c70,
0xf11ea000-0xf11ea9c8)
GIC: Switching IRQ 29 to secure
Number of CPUs: 4
Calibrating timer loop... Per_cpu_data_alloc: (orig: 0xf0062390-0xf0062d58)
done.
KERNEL: Warning: Buddy::alloc: Size mismatch: 9c8 v 1000
Allocate 2504 bytes (2KB) for CPU[1] local storage (offset=1189c70,
0xf11ec000-0xf11ec9c8)
MDB: use page size: 20
MDB: use page size: 12
SIGMA0: Hello!
KIP @ 10002000
allocated 4KB for maintenance structures
SIGMA0: Dump of all resource maps
RAM:------------------------
[4:10000000;10000fff]
[0:10073000;1008ffff]
[0:10097000;10097fff]
[0:1009f000;1013ffff]
[4:10140000;10171fff]
[0:10172000;10177fff]
[4:10178000;10193fff]
[0:10194000;110fffff]
[4:11100000;119a7fff]
[0:119a8000;4effffff]
IOMEM:----------------------
[0:0;fffffff]
[0:50000000;ffffffff]
MOE: Hello world
FPU1: Arch: VFPv3(3), Part: VFPv3(30), r: 4, v: 9, i: 41, t: hard, p:
dbl/sngl
MGIC: Switching IRQ 29 to secure
OCache config: ON
EID_PFR[01]: 00001231 00000011: foPer_cpu_data_alloc: (orig:
0xf0062390-0xf0062d58)
und ID_[DA]FR0: 00010444 00000000
ID_MMFR[04]: 00100103 20000000 01230000 00102111
1CPU[1]: goes to idle loop
0
KERNEL: Warning: Buddy::alloc: Size mismatch: 9c8 v 1000
2250Allocate 2504 bytes (2KB) for CPU[2] local storage (offset=113fc70,
0xf11a2000-0xf11a29c8)
0 KByte free memory
MOE: found RAM from 10000000 to 4f000000
MOE: allocated 1008 KByte for the page array @0x10194000
MOE: virtual user address space [0-bfffffff]
MOE: rom name space cap -> [C:501000]
BOOTFS: [11100000-11119474] [C:503000] l4re
BOOTFS: [1111a000-1116cc20] [C:504000] ned
BOOTFS: [1116d000-1116d35c] [C:505000] l4lx.cfg
BOOTFS: [1116e000-112c4470] [C:506000] io
BOOTFS: [112c5000-112c517c] [C:507000] arm-imx6.io
BOOTFS: [112c6000-116a7498] [C:50800FPU2: Arch: VFPv3(3), Part:
VFPv3(30), r: 4, v: 9, i: 41, t: hard, p: dbl/sngl
0GIC: Switching IRQ 29 to secure
] vmlinCache config: ON
Per_cpu_data_alloc: (orig: 0xf0062390-0xf0062d58)
uzID_PFR[01]: 00001231 00000011.ar
KERNEL: Warning: Buddy::alloc: Size mismatch: 9c8 v 1000
m
ID_[DA]FR0: 00010444 00000000
Allocate 2504 bytes (2KB) for CPU[3] local storage (offset=1149c70,
0xf11ac000-0xf11ac9c8)
ID_MMFR[04]: 00100103 20000000 01230000 00102111
CPU[2]: goes to idle loop
BOOTFS: [116a8000-119a8000] [C:509000] ramdisk-arm.rd
MOE: cmdline: moe rom/l4lx.cfg
MOE: Starting: rom/ned rom/l4lx.cfg
MOE: loading 'rom/ned'
Ned says: Hi World!
Ned: loading file: 'rom/l4lx.cfg'
IO | Io service
IO | Verboseness level: 4
FPU3: Arch: VFPv3(3), Part: VFPv3(30), r: 4, v: 9, i: 41, t: hard, p:
dbl/sngl
IC: Switching IRQ 29 to secure
[Cache config: ON
3ID_PFR[01]: 00001231 000000113mIO ID_[DA]FR0: 00010444 00000000
ID_MMFR[04]: 00100103 20000000 01230000 00102111
CPU[3]: goes to idle loop
| unused physical memory space:
IO | [00000000000000-0000000fffffff]
IO | [00000050000000-000000ffffffff]
IO | Loading: config 'rom/arm-imx6.io'
IO | l4linux: [N12_GLOBAL__N_112Virtual_sbusE]
IO | Resources: ==== start ====
IO | Resources: ===== end =====
IO | L4ICU: [N2Vi6Sw_icuE]
IO | Resources: ==== start ====
IO | Resources: ===== end =====
IO | imx6q-fec.dev: [N2Vi9Proxy_devE]
IO | Resources: ==== start ====
IO | IOMEM [00000002188000-0000000218bfff 4000] non-pref (32bit)
(align=3fff flags=2)
IO | IRQ [00000000000096-00000000000096 1] none (32bit)
(align=0 flags=1)
IO | IRQ [00000000000097-00000000000097 1] none (32bit)
(align=0 flags=1)
IO | Resources: ===== end =====
IO | dmamem: [N2Vi9Proxy_devE]
IO | Resources: ==== start ====
IO | IOMEM [00000010430000-000000104affff 80000] non-pref
(32bit) (align=7ffff flags=2)
IO | Resources: ===== end =====
IO | Real Hardware -----------------------------------
IO | System Bus: hid=
IO | Resources: ==== start ====
IO | Resources: ===== end =====
IO | NIC: hid=imx6q-fec.0
IO | Clients: ===== start ====
IO | imx6q-fec.dev: [N2Vi9Proxy_devE]
IO | Clients: ===== end ====
IO | Resources: ==== start ====
IO | IOMEM [00000002188000-0000000218bfff 4000] non-pref (32bit)
(align=3fff flags=2)
IO | IRQ [00000000000096-00000000000096 1] none (32bit)
(align=0 flags=1)
IO | IRQ [00000000000097-00000000000097 1] none (32bit)
(align=0 flags=1)
IO | Resources: ===== end =====
IO | DMAMEM: hid=dmamem
IO | Clients: ===== start ====
IO | dmamem: [N2Vi9Proxy_devE]
IO | Clients: ===== end ====
IO | Resources: ==== start ====
IO | IOMEM [00000010430000-000000104affff 80000] non-pref
(32bit) (align=7ffff flags=2)
IO | Resources: ===== end =====
IO | warning: could not register control interface at cap
'platform_ctl'
IO | Ready. Waiting for request.
l4linux | PH 0 (t: 1) offs=00008000 vaddr=02000000 vend=02486494
l4linux | phys=02000000 ephys=02486494
l4linux | f_sz=003c339c memsz=00486494 flgs=rwx
l4linux | L4LINUX: Ma DBG: Virtual Address 02000000 End 02486494
l4linux | Physical Address 02000000 End 02486494
l4linux | PH 1 (t: 4) offs=00373e1c vaddr=0236be1c vend=0236be40
l4linux | phys=0236be1c ephys=0236be40
l4linux | f_sz=00000024 memsz=00000024 flgs=r-x
l4linux | L4LINUX: Ma DBG: Virtual Address 0236be1c End 0236be40
l4linux | Physical Address 0236be1c End 0236be40
l4linux | PH 2 (t: 1685382481) offs=00000000 vaddr=00000000 vend=00000000
l4linux | phys=00000000 ephys=00000000
l4linux | f_sz=00000000 memsz=00000000 flgs=rwx
l4linux | L4LINUX: Ma DBG: Virtual Address 00000000 End 00000000
l4linux | Physical Address 00000000 End 00000000
l4linux | L4LINUX: Ma DBG: Starting binary at 0x2000360, argc=13
argv=0xafff4f74 *argv=0xb1007ff0 argv0=rom/vmlinuz.arm
l4linux | External resolver is at 0xa800075c
l4linux | ======> L4Linux starting... <========
l4linux | Linux version 3.16.0-l4 (aichouch@aichouch-ThinkCentre-M90) (gcc
version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-29) )
#41 SMP Thu Oct 29 11:59:28 CET 2015
l4linux | Binary name: rom/vmlinuz.arm
l4linux | This is an AEABI build.
l4linux | Linux kernel command line (12 args): mem=64M console=ttyLv0
l4x_rd=rom/ramdisk-arm.rd root=1:0 ramdisk_size=4000 rw init=/linuxrc
earlyprintk=1 showpfexc=1 showghost=1 print-fatal-signals=1 ip=dhp
l4linux | CPU mapping (l:p)[1]: 0:0
l4linux | Image: 020000a0 - 02600000 [6143 KiB].
l4linux | Areas: Text: 020000a0 - 02396000 [3671kB] (a bit longer)
l4linux | Data: 02396000 - 023be4a0 [161kB]
l4linux | Initdata: 0236c000 - 02395900 [166kB]
l4linux | BSS: 023c339c - 02486494 [780kB]
l4linux | Device scan:
l4linux | Device: L4ICU
l4linux | Device: imx6q-fec.dev
l4linux | MEM: 02188000 - 0218bfff
l4linux | IRQ: 00000096 - 00000096
l4linux | IRQ: 00000097 - 00000097
l4linux | Device: dmamem
l4linux | MEM: 10430000 - 104affff
l4linux | Device scan done.
l4linux | L4LINUX: Ma DBG: l4lx_thread_create: Created thread 415 (cpu0)
(u:b3000e00, v:b3000c00, sp:02397fa4)
l4linux | main thread will be 415
l4linux | l4x_register_pointer_section: addr = 02000000 size = 4747264
l4linux | section-with-init: Virt: 0x2000000 to 0x2486493 [4633 KiB]
l4linux | section-with-init: Phys: 0x104bb000 to 0x10941493, [4633 KiB]
l4linux | Main thread running, waiting...
l4linux | Main thread running, waiting...
l4linux | stext virt 020000a0, phys 104bb0a0
l4linux | etext virt 02396000, phys 10851000
l4linux | L4x: Memory size: 64MB
l4linux | L4x: Setting superpages for main memory
l4linux | L4x: Adjusted memory start: 02000000
l4linux | Main memory: Virt: 0x2600000 to 0x65fffff [65536 KiB]
l4linux | Main memory: Phys: 0x11a00000 to 0x159fffff, [65536 KiB]
l4linux | l4x: vmalloc area: 06600000 - 0e600000
l4linux | l4x_register_pointer_section: addr = 02000000 size = 4747264
l4linux | text: Virt: 0x2000000 to 0x2486493 [4633 KiB]
l4linux | text: Phys: 0x104bb000 to 0x10941493, [4633 KiB]
l4linux | Booting Linux on physicl CPU 0x0
Linux version 3.16.0-l (aichouch@aichouch-ThinCentre-M90) (gcc versionm
4.8.3 20140320 (prerelease) (Sourcery CodeBenc Lite 2014.05-29) ) #41 MP
Thu Oct 29 11:59:28 CmET 2015
CPU: Fiasco [412fc09a]revision 10 (ARMv7), cr=0000000
CPU: PIPT / VIPT nonalasing data cache, VIPT nnaliasing instruction camche
Machine: L4
Ignoring unrecognised ag 0x00000000
bootconsole [earlykdb0 enabled
Forcing write-allocatecache policy for SMP
Forcing shared mapping for SMP
Memory policy: Data cahe writealloc
Page fault: addr = bffff003 pc = 0236fb80 (rw, T)
l4linux | Forward PF to our pager
l4linux | Loading: rom/ramdisk-arm.rd
l4linux | INITRD: Size of RAMdisk is 3072KiB
l4linux | INITRD: 00002000 - 0030000
l4x_virt_to_phys: Could not translate virt. address 0x2000
l4linux | v2p: 0: v:00000000-00001000 p:00000000-00001000 sz:00001000
l4linux | v2p: 1: v:02000000-02486494 p:104bb000-10941494 sz:00486494
l4linux | v2p: 2: v:02600000-06600000 p:11a00000-15a00000 sz:04000000
l4linux | v2p: 3: v:02000000-02486494 p:104bb000-10941494 sz:00486494
l4linux | ------------[ cut here ------------
WARNING: CPU: 0 PID: 0at
/home/aichouch/dev/l4e-snapshot-2014092821/srmc/l4linux/arch/l4/kernel/main.c:392
l4x_virt_tophys+0x7c/0xac()
Modules linked in:
CPU: 0 PID: 0 Comm: swpper Not tainted 3.16.0-4 #41
[<020109b4>] (unwind_bcktrace) from [<02007684] (show_stack+0x10/0x14)m
[<02007684>] (show_stak) from [<0228f2ec>] (dup_stack+0x84/0x94)
[<0228f2ec>] (dump_stak) from [<02020f5c>] (wan_slowpath_common+0x6c/0mx88)
[<02020f5c>] (warn_slopath_common) from [<0202014>]
(warn_slowpath_nulml+0x1c/0x24)
[<02021014>] (warn_slopath_null) from [<0200298>]
(l4x_virt_to_phys+0xm7c/0xac)
[<02002908>] (l4x_virtto_phys) from [<0236ef4c]
(l4x_load_initrd+0x208m/0x240)
[<0236ef4c>] (l4x_loadinitrd) from [<02370860> (setup_arch+0x89c/0x8d4m)
[<02370860>] (setup_arh) from [<0236c5c8>] (strt_kernel+0x8c/0x370)
[<0236c5c8>] (start_kenel) from [<00000000>] ( (null))
---[ end trace 3406ff2bd97382e ]---
l4x_virt_to_phys: Could not translate virt. address 0x302000
l4linux | v2p: 0: v:00000000-00001000 p:00000000-00001000 sz:00001000
l4linux | v2p: 1: v:02000000-02486494 p:104bb000-10941494 sz:00486494
l4linux | v2p: 2: v:02600000-06600000 p:11a00000-15a00000 sz:04000000
l4linux | v2p: 3: v:02000000-02486494 p:104bb000-10941494 sz:00486494
l4linux | ------------[ cut here ------------
WARNING: CPU: 0 PID: 0at
/home/aichouch/dev/l4e-snapshot-2014092821/srmc/l4linux/arch/l4/kernel/main.c:392
l4x_virt_tophys+0x7c/0xac()
Modules linked in:
CPU: 0 PID: 0 Comm: swpper Tainted: G W 3.16.0-l4 #41
[<020109b4>] (unwind_bcktrace) from [<02007684] (show_stack+0x10/0x14)m
[<02007684>] (show_stak) from [<0228f2ec>] (dup_stack+0x84/0x94)
[<0228f2ec>] (dump_stak) from [<02020f5c>] (wan_slowpath_common+0x6c/0mx88)
[<02020f5c>] (warn_slopath_common) from [<0202014>]
(warn_slowpath_nulml+0x1c/0x24)
[<02021014>] (warn_slopath_null) from [<0200298>]
(l4x_virt_to_phys+0xm7c/0xac)
[<02002908>] (l4x_virtto_phys) from [<0236ef58]
(l4x_load_initrd+0x214m/0x240)
[<0236ef58>] (l4x_loadinitrd) from [<02370860> (setup_arch+0x89c/0x8d4m)
[<02370860>] (setup_arh) from [<0236c5c8>] (strt_kernel+0x8c/0x370)
[<0236c5c8>] (start_kenel) from [<00000000>] ( (null))
---[ end trace 3406ff2bd97382f ]---
RAMdisk from 00002000 (00002000) to 00302000 (00302000) [3072KiB]
l4linux | PERCPU: Embedded 7 page/cpu @06521000 s6400 r812 d14080 u32768
Built 1 zonelists in Zne order, mobility groupng on. Total pages: 177m16
Kernel command line: mm=64M console=ttyLv0 l4xrd=rom/ramdisk-arm.rd
romot=1:0 ramdisk_size=4000 rw init=/linuxrc earlyrintk=1 showpfexc=1
showhost=1 print-fatal-signamls=1 ip=dhcp
L4LINUX CEA version
PID hash table entries 512 (order: -1, 2048 byes)
Dentry cache hash tabl entries: 16384 (order: , 65536 bytes)
Inode-cache hash tableentries: 8192 (order: 3,32768 bytes)
Memory: 64776K/71680K vailable (2739K kernel cde, 161K rwdata, 764K
romdata, 166K init, 780K bss, 6904K reserved)
Virtual kernel memory ayout:
vector : 0xbffff00 - 0xc0000000 ( 4 k)
fixmap : 0xffc0000 - 0xffe00000 (2048 k)
vmalloc : 0x0660000 - 0x0e600000 ( 128 M)
lowmem : 0x0000000 - 0x06600000 ( 102 M)
modules : 0x0101000 - 0x02000000 ( 15 M)
.text : 0x0200000 - 0x0236be40 (3504 k)
.init : 0x0236c00 - 0x02395900 ( 167 k)
.data : 0x0239600 - 0x023be4a0 ( 162 k)
.bss : 0x023c33c - 0x02486494 ( 781 k)
Hierarchical RCU impleentation.
l4linux RCU restricting CPUs rom NR_CPUS=4 to nr_cpu_ds=1.
RCU: Adjusting geometr for rcu_fanout_leaf=16,nr_cpu_ids=1
NR_IRQS:220
l4timer: Using IRQ210
L4LINUX: Ma DBG: l4lx_thread_create: Created thread 41b (timer0)
(u:b3000a00, v:00000000, sp:0241dfa0)
l4linux | sched_clock: 64 bits at1000kHz, resolution 1000s, wraps every
214748364m8000ns
Console: colour dummy evice 80x30
console [ttyLv0] enabled
console [ttyLv0] enabld
bootconsole [earlykdb0] disabled
bootconsole [earlykdb0 disabled
Calibrating delay loop... 1574.50 BogoMIPS (lpj=7872512)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x2294850 - 0x2294850
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Added static device 'L4ICU' with 0 resources.
Added static device 'imx6q-fec.dev' with 3 resources.
DMA mem phys at 10430000 - 104affff
DMA mem virt at 00302000 - 00381fff
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
[email protected]>
PTP clock support registered
Switched to clocksource l4kipclk
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like an
initrd
INITRD: Freeing memory.
l4x: Checks passed.
NetWinder Floating Point Emulator V0.97 (double precision)
futex hash table entries: 256 (order: 2, 16384 bytes)
msgmni has been set to 126
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
L4 serial driver
ttyLv0 at MMIO 0x1 (irq = 211, base_baud = 230400) is a L4
l4ser_shm: L4 shared mem serial driver
l4cdds: No name given, not starting.
brd: module loaded
l4bdds: No name given, not starting.
mousedev: PS/2 mouse device common for all mice
TCP: cubic registered
NET: Registered protocol family 17
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 164K (0236c000 - 02395000)
mount: mounting proc on /proc failed: Device or resource busy
mount: mounting devtmpfs on /dev failed: No such device
ifconfig: SIOCSIFADDR: No such device
Please press Enter to activate this console.
#/
- Modification to L4Linux:
-------------------------------------------------------------------------------------------------------------------------------
1- mach_setup.c patch:
-------------------------------------------------------------------------------------------------------------------------------
---
/home/aichouch/l4re-snapshot-2014092821/src/l4linux/arch/l4/kernel/arch-arm/mach_setup.c
2014-09-28
21:51:04.000000000 +0200
+++ l4linux/arch/l4/kernel/arch-arm/mach_setup.c 2015-10-28
14:57:04.831851872 +0100
@@ -5,15 +5,84 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/smsc911x.h>
+#include <linux/fec.h>
#include <linux/slab.h>
#include <linux/list.h>
+
#include <asm/generic/devs.h>
#ifdef CONFIG_L4_DMAPOOL
#include <asm/l4x/dma.h>
#endif
+#define PHY_ID_AR8031 0x004dd074
+
+static struct resource imx6q_fec_resources[] = {
+ {
+ .start = 0x02188000,
+ .end = 0x0218BFFF,
+ .name = "imx6q-fec mem",
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 150,
+ .end = 151,
+ .name = "imx6q-fec irq",
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct fec_platform_data imx6q_fec_pd = {
+ .phy = PHY_INTERFACE_MODE_RGMII
+};
+
+static struct platform_device imx6q_fec_dev = {
+ .name = "imx6q-fec",
+ .id = 0,
+ .resource = imx6q_fec_resources,
+ .num_resources = ARRAY_SIZE(imx6q_fec_resources),
+ .dev = {
+ .platform_data = &imx6q_fec_pd,
+ },
+};
+
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+ u16 val;
+
+ /* to enable AR8031 output a 125Mhz clk from CLK_25M */
+ phy_write(dev, 0xd, 0x7);
+ phy_write(dev, 0xe, 0x8016);
+ phy_write(dev, 0xd, 0x4007);
+
+ val = phy_read(dev, 0xe);
+ val &= 0xffe3;
+ val |= 0x18;
+ phy_write(dev, 0xe, val);
+
+ /* introduce tx clock delay */
+ phy_write(dev, 0x1d, 0x5);
+ val = phy_read(dev, 0x1e);
+ val |= 0x0100;
+ phy_write(dev, 0x1e, val);
+
+ return 0;
+}
+
+static void __init imx6q_enet_phy_init(void)
+{
+ if (IS_BUILTIN(CONFIG_PHYLIB)) {
+ phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, ar8031_phy_fixup);
+ }
+}
+
+static L4X_DEVICE_CB(imx6q_device_cb_fec)
+{
+ platform_device_register(&imx6q_fec_dev);
+ imx6q_enet_phy_init();
+}
+
static int dev_init_done;
@@ -238,6 +307,7 @@
l4x_register_platform_device_callback("compactflash",
realview_device_cb_pata);
l4x_register_platform_device_callback("smsc911x",
realview_device_cb_smsc);
l4x_register_platform_device_callback("aaci", aaci_cb);
+ l4x_register_platform_device_callback("imx6q-fec.dev",
imx6q_device_cb_fec);
#endif
}
-------------------------------------------------------------------------------------------------------------------------------
2- fec.h patch:
-------------------------------------------------------------------------------------------------------------------------------
---
/home/aichouch/l4re-snapshot-2014092821/src/l4linux/drivers/net/ethernet/freescale/fec.h
2014-09-28
21:51:04.000000000 +0200
+++ l4linux/drivers/net/ethernet/freescale/fec.h 2015-10-28
15:02:26.943851538 +0100
@@ -19,7 +19,7 @@
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) ||
defined(CONFIG_M528x) || \
defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
- defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+ defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) || CONFIG_L4
/*
* Just figures, Motorola would have to change the offsets for
* registers in the same peripheral device on different models
@@ -147,7 +147,7 @@
/*
* Define the buffer descriptor structure.
*/
-#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) ||
defined(CONFIG_L4)
struct bufdesc {
unsigned short cbd_datlen; /* Data length */
unsigned short cbd_sc; /* Control and status info */
-------------------------------------------------------------------------------------------------------------------------------
3- fec_main.c patch:
-------------------------------------------------------------------------------------------------------------------------------
---
/home/aichouch/l4re-snapshot-2014092821/src/l4linux/drivers/net/ethernet/freescale/fec_main.c
2014-09-28
21:51:04.000000000 +0200
+++ l4linux/drivers/net/ethernet/freescale/fec_main.c 2015-10-28
15:04:41.011851399 +0100
@@ -61,6 +61,12 @@
#include "fec.h"
+#ifdef CONFIG_L4
+//ahb clock
+#define clk_get_rate(x) 132000000
+
+#endif
+
static void set_multicast_list(struct net_device *ndev);
#if defined(CONFIG_ARM)
@@ -2535,12 +2541,22 @@
fep->phy_interface = ret;
}
+#ifdef CONFIG_L4
+ //Do not setup Clocks or regulator
+ fep->clk_ahb = NULL;
+ fep->clk_ipg = NULL;
+ fep->clk_enet_out = NULL;
+ fep->clk_ptp = NULL;
+ fep->reg_phy = NULL;
+#else
+
fep->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(fep->clk_ipg)) {
ret = PTR_ERR(fep->clk_ipg);
goto failed_clk;
}
+
fep->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(fep->clk_ahb)) {
ret = PTR_ERR(fep->clk_ahb);
@@ -2576,6 +2592,8 @@
fep->reg_phy = NULL;
}
+#endif
+
fec_reset_phy(pdev);
if (fep->bufdesc_ex)
-------------------------------------------------------------------------------------------------------------------------------
4- fec_ptp.c patch:
-------------------------------------------------------------------------------------------------------------------------------
---
/home/aichouch/l4re-snapshot-2014092821/src/l4linux/drivers/net/ethernet/freescale/fec_ptp.c
2014-09-28
21:51:04.000000000 +0200
+++ l4linux/drivers/net/ethernet/freescale/fec_ptp.c 2015-10-28
14:39:23.863852973 +0100
@@ -48,6 +48,9 @@
#include "fec.h"
+//ahb clock
+#define clk_get_rate(x) 132000000
+
/* FEC 1588 register bits */
#define FEC_T_CTRL_SLAVE 0x00002000
#define FEC_T_CTRL_CAPTURE 0x00000800
-------------------------------------------------------------------------------------------------------------------------------
5- Freescale Kconfig patch:
-------------------------------------------------------------------------------------------------------------------------------
---
/home/aichouch/l4re-snapshot-2014092821/src/l4linux/drivers/net/ethernet/freescale/Kconfig
2014-09-28
21:51:04.000000000 +0200
+++ l4linux/drivers/net/ethernet/freescale/Kconfig 2015-10-28
14:34:45.955853261 +0100
@@ -7,7 +7,7 @@
default y
depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
+ ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || L4
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -23,7 +23,7 @@
config FEC
tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || SOC_IMX28)
+ ARCH_MXC || SOC_IMX28) || L4
default ARCH_MXC || SOC_IMX28 if ARM
select PHYLIB
select PTP_1588_CLOCK
-------------------------------------------------------------------------------------------------------------------------------
6- L4Linux KConfig patch:
-------------------------------------------------------------------------------------------------------------------------------
--- /home/aichouch/l4re-snapshot-2014092821/src/l4linux/arch/l4/Kconfig
2014-09-28
21:51:04.000000000 +0200
+++ l4linux/arch/l4/Kconfig 2015-10-28 14:39:21.515852975 +0100
@@ -63,16 +63,21 @@
config L4_PLATFORM_GENERIC
bool "Generic"
select CLKDEV_LOOKUP
- select L4_CLK_NOOP
+ select HAVE_CLK_PREPARE
+ select HAVE_MACH_CLKDEV
+ select COMMON_CLK
config L4_PLATFORM_REALVIEW
bool "Realview"
select CLKDEV_LOOKUP
select OUTER_CACHE
- select L4_CLK_NOOP
+
endchoice
+config L4_CLK_NOOP
+ bool "L4 Clock Noop"
+ depends on (L4_PLATFORM_GENERIC || L4_PLATFORM_REALVIEW)
menu "Features"
- Note that the L4_CLK_NOOP option should be disabled otherwise a link
error occurs when compiling L4Linux.
-------------------------------------------------------------------------------------------------------------------------------
7- arm-imx6.io file:
-------------------------------------------------------------------------------------------------------------------------------
hw-root
{
NIC => new Device()
{
.hid = "imx6q-fec.0";
new-res Mmio(0x02188000 .. 0x0218BFFF);
new-res Irq(150);
new-res Irq(151);
}
DMAMEM => new Device()
{
.hid = "dmamem";
new-res Mmio_ram(0x80000, 0);
}
}
l4linux => new System_bus()
{
#NIC => wrap(hw-root.NIC);
"imx6q-fec.dev" => wrap(hw-root.NIC);
"dmamem" => wrap(hw-root.DMAMEM);
}
-------------------------------------------------------------------------------------------------------------------------------
8- l4lx.cfg file:
-------------------------------------------------------------------------------------------------------------------------------
-- vim:set ft=lua:
loader = L4.default_loader;
vbus_l4linux = loader:new_channel();
local lxname = "vmlinuz";
if L4.Info.arch() == "arm" then
lxname = "vmlinuz.arm";
end
loader:start(
{
caps = {
sigma0 = L4.cast(L4.Proto.Factory,
L4.Env.sigma0):create(L4.Proto.Sigma0);
icu = L4.Env.icu;
l4linux = vbus_l4linux:svr();
},
log = { "IO", "y" },
l4re_dbg = L4.Dbg.Warn,
}, "rom/io -vvv rom/arm-imx6.io");
L4.default_loader:start(
{
caps = {
vbus = vbus_l4linux;
log = L4.Env.log:m("rws"),
},
l4re_dbg = L4.Dbg.Warn,
log = { "l4linux", "yellow" },
}, "rom/" .. lxname .. " mem=64M console=ttyLv0 l4x_rd=rom/ramdisk-" ..
L4.Info.arch() .. ".rd root=1:0 ramdisk_size=4000 rw init=/linuxrc
earlyprintk=1 showpfexc=1 showghost=1 print-fatal-signals=1 ip=dhc\
p");
_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers