Setting up ssd and hard disk in l4linux

Xinyue Wu <[email protected]>
Newsgroups gmane.comp.micro-kernel.l4.devel
Message-ID <CAOSZEzeVynAC+fruJ__zReZV1VNNum_D2JxguKU8rrz3xSMBqA@mail.gmail.com>
Dear Developers,

I have been trying to mount ssd and hard disk in l4linux. There are some
similiar questions in previous archives, and I have done the following
things according to them:

   - configure 'devs' file and 'io' file, add sata to vbus
   - enable PCI support
   - enable vPCI driver
   - enable AHCI driver

But when I ran l4linux in hardware, I still couldn't find sata in pci bus,
nor could I found my devices under /dev. Does anyone have some suggestions?
Or maybe there are something wrong in my device configuration, please let
me know if so.

Thanks a lot.

x86-legacy.devs =================
local Res = Io.Res
local Hw = Io.Hw

Io.hw_add_devices(function()
  SATA = Hw.Device(function()
        Property.hid = "SATA";
        Resource.iop1 = Res.io(0x1f0, 0x1f7);
        Resource.iop2 = Res.io(0x3f6, 0x3f7);
        Resource.irq = Res.irq(14);
  end);
end)

l4lx-x86.io ====================
local hw = Io.system_bus()

Io.add_vbusses
{
  l4linux = Io.Vi.System_bus
  {
    -- Add a new virtual PCI root bridge
    PCI0 = Io.Vi.PCI_bus
    {
          pci_sata = wrap(hw:match("SATA"));
    };
  };
}

l4lx.cfg ======================
local L4 = require("L4");

loader = L4.default_loader;

vbus_l4linux = loader:new_channel();
vbus_input       = loader:new_channel();

loader:start(
        {
                caps = {
                        sigma0  = L4.cast(L4.Proto.Factory,
L4.Env.sigma0):create(L4.Proto.Sigma0);
                        icu             = L4.Env.icu;
                        l4linux = vbus_l4linux:svr();
                },
                log = {"IO", "y"},
                l4re_dbg = L4.Dbg.Warn,
        }, "rom/io rom/x86-legacy.devs rom/l4lx-x86.io");

loader:start(
        {
                caps = {
                vbus = vbus_l4linux;
                },
                log = L4.Env.log:m("rws"),
        },

    "rom/vmlinuz mem=1024M console=ttyLv0 earlyprintk=1
l4x_rd=rom/ramdisk-256m.rd root=1:0 ramdisk_size=268435456");

_______________________________________________
l4-hackers mailing list
[email protected]
http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.