Re: How to L4Re on the S32G
qiang xu <[email protected]> Mon, 24 Feb 2025 17:17:00 +0800
| Newsgroups | gmane.comp.micro-kernel.l4.devel |
|---|---|
| Message-ID | <CACFR-a5Dj3=YLzSHXE=BJb2kOwGmPkZYeWFDMp-cOaSa9JzmSg@mail.gmail.com> |
Hi Adam， When I changed from 'init' to '/bin/sh', I did not enter the expected shell. To print more information, I changed the ‘*bootargs*‘ to ‘*bootargs = "console=ttyAMA0 init=/bin/sh debug ignore_loglevel loglevel=8 initcall_debug"*’. The printed information is in the log file. I noticed that several initcalls returned abnormal values. I'm not sure if these anomalies are affecting my issue. Additionally, I want to mention that I saw someone in the S32G community <https://community.nxp.com/t5/S32G/Hypervisor-support-on-S32G/m-p/1550392> asking about L4Re. So, when creating the S32G Linux image, I referenced the Xen Hypervisor Dom0less section. In the ‘*uvmm-io.ned*’ file, I specified the rootfs via ‘*rd=fsl-image-dom0less-s32g274aevb.cpio.gz*’. It could be because I used the Dom0less method to build the image that it caused some Xen-related exceptions in the initcalls. Finally, I double-checked that both 'init' and '/bin/sh' exist and have the correct permissions. I have one more question: Xen is a hypervisor, and Fiasco in L4Re is also a hypervisor. Will this conflict, or am I misunderstanding something? I apologize if these are naive questions, I'm not very familiar with this area, and I might be asking a lot of silly questions. Regards, Qiang On Sat, Feb 22, 2025 at 2:54 PM Adam Lackorzynski <[email protected]> wrote: > Hi Qiang, > > what should the initrd, i.e., /init, actually do? Any change when you > write init=/bin/sh instead of init=/init? > > > Adam > > On Fri Feb 21, 2025 at 11:27:07 +0800, qiang xu wrote: > > Hi Philipp, > > > > Thank you very much for the advice you provided. I have changed it to > 512M. > > It now runs without errors, but it gets stuck at: > > > > *vm1 | [ 1.753286] Freeing unused kernel memory: 1344K.* > > Regards, > > Qiang > > > > => fatload mmc 0 0x8000e000 l4re_uvmm-io.uimage > > 46235855 bytes read in 1972 ms (22.4 MiB/s) > > => fatload mmc 0 0x80000000 s32g2xxa-evb.dtb1 > > 54149 bytes read in 16 ms (3.2 MiB/s) > > => bootm 0x8000e000 - 0x80000000 > > ## Booting kernel from Legacy Image at 8000e000 ... > > Image Name: L4 Image #27 > > Image Type: AArch64 Linux Kernel Image (uncompressed) > > Data Size: 46235791 Bytes = 44.1 MiB > > Load Address: 91000000 > > Entry Point: 91000000 > > Verifying Checksum ... OK > > ## Flattened Device Tree blob at 80000000 > > Booting using the fdt blob at 0x80000000 > > Loading Kernel Image > > Using Device Tree in place at 0000000080000000, end 0000000080010384 > > fixup: pfe0 set to 00:01:be:be:ef:11 > > fixup: pfe1 set to 00:01:be:be:ef:22 > > fixup: pfe2 set to 00:01:be:be:ef:33 > > > > Starting kernel ... > > > > > > L4 Bootstrapper > > Build: #27 Fri Feb 21 10:21:53 CST 2025, 11.4.0 > > RAM: 0000000080000000 - 00000000ffffffff: 2097152kB > > RAM: 0000000880000000 - 00000008dfffffff: 1572864kB > > Total RAM: 3584MB > > Scanning fiasco > > Scanning sigma0 > > Scanning moe > > Moving up to 15 modules behind 81300000 > > moving module 00 { 9101f000-910e5fe7 } -> { 8600a000-860d0fe7 } > [815080] > > moving module 01 { 910e6000-910ebcd7 } -> { 860d1000-860d6cd7 } [23768] > > moving module 02 { 910ec000-9111e6cf } -> { 860d7000-861096cf } > [206544] > > moving module 03 { 9111f000-9121258f } -> { 8610a000-861fd58f } > [996752] > > moving module 04 { 91213000-9122e537 } -> { 861fe000-86219537 } > [111928] > > moving module 05 { 9122f000-912b7aa7 } -> { 8621a000-862a2aa7 } > [559784] > > moving module 06 { 912b8000-912c5384 } -> { 862a3000-862b0384 } [54149] > > moving module 07 { 912c6000-92bd9a52 } -> { 862b1000-87bc4a52 } > [26294867] > > moving module 08 { 92bda000-92bdb218 } -> { 87bc5000-87bc6218 } [4633] > > moving module 09 { 92bdc000-92bdc29a } -> { 87bc7000-87bc729a } [667] > > moving module 10 { 92bdd000-939bd807 } -> { 87bc8000-889a8807 } > [14551048] > > moving module 11 { 939be000-93a03faf } -> { 889a9000-889eefaf } > [286640] > > moving module 12 { 93a04000-93c16a87 } -> { 889ef000-88c01a87 } > [2173576] > > moving module 13 { 93c17000-93c171f7 } -> { 88c02000-88c021f7 } [504] > > moving module 14 { 93c18000-93c1808e } -> { 88c03000-88c0308e } [143] > > Loading fiasco > > found node 0 kernel info page (via ELF) at 0x80203000 > > Loading sigma0 > > Loading moe > > found node 0 kernel options (via ELF) at 0x80204000 > > Sigma0 config node: 0 ip:860003f4 > > Roottask config node: 0 ip:80841904 > > Regions of list 'regions' > > [ 34000000, 3407ffff] { 80000} Arch pfebufs@34000000 > > [ 34080000, 3409ffff] { 20000} Arch pfebufs@34080000 > > [ 80000000, 8000dfff] { e000} Root dtb > > [ 8000e000, 8000efff] { 1000} Root mbi_rt > > [ 80201000, 80205847] { 4848} Kern fiasco > > [ 80400000, 8061dfff] { 21e000} Kern fiasco > > [ 80840000, 8087d817] { 3d818} Root moe > > [ 83200000, 835dffff] { 3e0000} Arch pfebufs@83200000 > > [ 835e0000, 835fffff] { 20000} Arch pfebufs@835e0000 > > [ 84000000, 843fffff] { 400000} Arch shm@84000000 > > [ 85000000, 85000fff] { 1000} Arch ddr@85000000 > > [ 86000000, 8600946f] { 9470} Sigma0 sigma0 > > [ 8610a000, 88c0308e] { 2af908f} Root Module > > [ 91000158, 91000187] { 30} Root cpu_boot > > [ 9101e1d0, 9101ecdc] { b0d} Boot modinfo > > [ c0000000, c03fffff] { 400000} Arch shm@c0000000 > > [ c0400000, c07fffff] { 400000} Arch shm@c0400000 > > [ d0000000, d000007f] { 80} Arch shm@d0000000 > > [ d0000080, d00000ff] { 80} Arch shm@d0000080 > > [ ff800000, ff9fffff] { 200000} Arch atf@ff800000 > > Starting kernel fiasco at 80201190 > > Hello from Startup::stage2 > > Reserved 216 MiB as kernel memory. > > Number of IRQs available at this GIC: 576 > > CPU0: GIC Redistributor at ffff00480000 for 0x0 > > Detecting PSCI ... > > Detected PSCI v1.1 > > PSCI: CPU_SUSPEND format original v0.2, does not support OS-initiated > mode > > PSCI: TOS: Not present or not required. > > FPU: Initialize > > ARM generic timer: freq=5000000 interval=5000 cnt=1137745716 > > SERIAL ESC: allocated IRQ 114 for serial uart > > Not using serial hack in slow timer handler. > > Welcome to the L4Re Microkernel! > > L4Re Microkernel on arm-64 > > Rev: unknown compiled with gcc 11.4.0 for NXP S32G [] > > Build: #12 Tue Feb 18 14:17:13 CST 2025 > > > > Cache config: ON > > CPU1: GIC Redistributor at ffff004a0000 for 0x1 > > CPU1: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000 > > ID_MMFR[04]: 00001122 00000000 00000000 00000000 > > CPU2: GIC Redistributor at ffff004c0000 for 0x100 > > CPU2: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000 > > ID_MMFR[04]: 00001122 00000000 00000000 00000000 > > CPU3: GIC Redistributor at ffff004e0000 for 0x101 > > Calibrating timer loop... > > CPU3: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000 > > ID_MMFR[04]: 00001122 00000000 00000000 00000000 > > Timer calibration done. > > MDB: use page size: 30 > > MDB: use page size: 21 > > MDB: use page size: 12 > > SIGMA0: Hello! > > KIP @ 80203000 > > allocated 4KB for maintenance structures > > SIGMA0: Dump of all resource maps > > RAM:------------------------ > > [4:---:80000000;8000dfff] > > [4:RWX:8000e000;8000efff] > > [0:RWX:8000f000;80200fff] > > [0:RWX:80206000;803fffff] > > [0:RWX:8061e000;8083ffff] > > [4:RWX:80840000;8087dfff] > > [0:RWX:8087e000;831fffff] > > [0:RWX:83600000;83ffffff] > > [0:RWX:84400000;84ffffff] > > [0:RWX:85001000;85ffffff] > > [0:RWX:8600a000;86109fff] > > [4:RWX:8610a000;88c03fff] > > [0:RWX:88c04000;90ffffff] > > [4:---:91000000;91000fff] > > [0:RWX:91001000;bfffffff] > > [0:RWX:c0800000;cfffffff] > > [0:RWX:d0001000;ff7fffff] > > [0:RWX:ffa00000;ffffffff] > > [0:RWX:880000000;8d27fffff] > > IOMEM:---------------------- > > [0:RW-:0;7fffffff] > > [0:RW-:83200000;835fffff] > > [0:RW-:84000000;843fffff] > > [0:RW-:85000000;85000fff] > > [0:RW-:c0000000;c07fffff] > > [0:RW-:d0000000;d0000fff] > > [0:RW-:ff800000;ff9fffff] > > [0:RW-:100000000;87fffffff] > > [0:RW-:8e0000000;ffffffffffffffff] > > MOE: Hello world > > MOE: found 3383848 KByte free memory > > MOE: found RAM from 8000f000 to 8d2800000 > > MOE: allocated 34088 KByte for the page array @0x8087e000 > > MOE: virtual user address space [0-ffffffffff] > > MOE: cmdline: moe rom/uvmm-io.ned > > MOE: rom name space cap -> [C:103000] > > MOE: rwfs name space cap -> [C:105000] > > ROMFS: [8610a000-861fd590] [C:107000] uvmm > > ROMFS: [861fe000-86219538] [C:109000] l4re > > ROMFS: [8621a000-862a2aa8] [C:10b000] ned > > ROMFS: [862a3000-862b0385] [C:10d000] s32g2xxa-evb.dtb1 > > ROMFS: [862b1000-87bc4a53] [C:10f000] > > fsl-image-dom0less-s32g274aevb.cpio.gz > > ROMFS: [87bc5000-87bc6219] [C:111000] vmm.lua > > ROMFS: [87bc7000-87bc729b] [C:113000] uvmm-io.ned > > ROMFS: [87bc8000-889a8808] [C:115000] Image > > ROMFS: [889a9000-889eefb0] [C:117000] cons > > ROMFS: [889ef000-88c01a88] [C:119000] io > > ROMFS: [88c02000-88c021f8] [C:11b000] io.cfg > > ROMFS: [88c03000-88c0308f] [C:11d000] vm_hw.vbus > > ROMFS: [80000000-8000e000] [C:11f000] .fdt > > MOE: Starting: rom/ned rom/uvmm-io.ned > > MOE: loading 'rom/ned' > > Ned says: Hi World! > > Ned: loading file: 'rom/uvmm-io.ned' > > Console Server > > cons> > > Created vcon channel: io [420010] > > cons> > > io | Io service > > io | Verboseness level: 7 > > io | unused physical memory space: > > > > Created vcon channel: vm1 [421010] > > cons> > > io | [00000000000000-00000033ffffff] > > > > Created vcon channel: mon1 [422010] > > cons> > > io | [000000340a0000-0000007fffffff] > > io | [00000100000000-0000087fffffff] > > io | [000008e0000000-ffffffffffffffff] > > io | no 'iommu' capability found, using CPU-phys for DMA > > io | Loading: config 'rom/io.cfg' > > io | Loading: config 'rom/vm_hw.vbus' > > io | Add IRQ resources to vbus: IRQ > [00000000000007-00000000000007 > > 1] level high (align=0 flags=300001) > > io | Add IRQ resources to vbus: IRQ > [00000000000079-00000000000079 > > 1] raising edge (align=0 flags=100001) > > io | vm_hw: [N12_GLOBAL__N_112Virtual_sbusE] > > io | Resources: ==== start ==== > > io | Resources: ===== end ===== > > io | L4ICU: [N2Vi6Sw_icuE] > > io | Resources: ==== start ==== > > io | Resources: ===== end ===== > > io | PMU: [N2Vi9Proxy_devE] > > io | Resources: ==== start ==== > > io | IRQ [00000000000007-00000000000007 1] level high > (align=0 > > flags=300001) > > io | Resources: ===== end ===== > > io | UART0: [N2Vi9Proxy_devE] > > io | Resources: ==== start ==== > > io | IRQ [00000000000079-00000000000079 1] raising edge > > (align=0 flags=100001) > > io | IOMEM [00000000002000-00000000003000 1001] 32-bit > non-pref > > (align=1000 flags=300002) > > io | Resources: ===== end ===== > > io | Real Hardware ----------------------------------- > > io | System Bus: > > io | Resources: ==== start ==== > > io | DMADOM [00000000000000-00000000000000 1] (align=0 flags=6) > > io | Resources: ===== end ===== > > io | pmu: > > io | compatible= { "arm,armv8-pmuv3" } > > io | Clients: ===== start ==== > > io | PMU: [N2Vi9Proxy_devE] > > io | Clients: ===== end ==== > > io | Resources: ==== start ==== > > io | IRQ [00000000000007-00000000000007 1] level high > (align=0 > > flags=300001) > > io | Resources: ===== end ===== > > io | uart0: > > io | compatible= { "arm,pl011" } > > io | Clients: ===== start ==== > > io | UART0: [N2Vi9Proxy_devE] > > io | Clients: ===== end ==== > > io | Resources: ==== start ==== > > io | IRQ [00000000000079-00000000000079 1] raising edge > > (align=0 flags=100001) > > io | IOMEM [00000000002000-00000000003000 1001] 32-bit > non-pref > > (align=1000 flags=300002) > > io | Resources: ===== end ===== > > io | warning: could not register control interface at cap > > 'platform_ctl' > > io | Ready. Waiting for request. > > io | vbus vm_hw does not support a global DMA domain > > vm1 | VMM[main]: Hello out there. > > vm1 | VMM[ram]: No memory nodes found, setting up default region > > vm1 | Command line: console=ttyAMA0 earlyprintk=1 rdinit=/init > > vm1 | VMM[]: [email protected],virtiocap: capability net is > > invalid. > > vm1 | VMM[vm]: Device creation for virtual device virtio_net@10000 > > failed. Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pmu' IRQ 23. > > vm1 | VMM[vm]: Device creation for pmu failed. Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@c0000000 > '.reg[0] > > (0xc0000000-0xc03fffff). > > vm1 | VMM[vm]: Device creation for shm@c0000000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@c0400000 > '.reg[0] > > (0xc0400000-0xc07fffff). > > vm1 | VMM[vm]: Device creation for shm@c0400000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@d0000000 > '.reg[0] > > (0xd0000000-0xd000007f). > > vm1 | VMM[vm]: Device creation for shm@d0000000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@d0000080 > '.reg[0] > > (0xd0000080-0xd00000ff). > > vm1 | VMM[vm]: Device creation for shm@d0000080 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@84000000 > '.reg[0] > > (0x84000000-0x843fffff). > > vm1 | VMM[vm]: Device creation for shm@84000000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'pfebufs@34000000'.reg[0] > > (0x34000000-0x3407ffff). > > vm1 | VMM[vm]: Device creation for pfebufs@34000000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'pfebufs@34080000'.reg[0] > > (0x34080000-0x3409ffff). > > vm1 | VMM[vm]: Device creation for pfebufs@34080000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'pfebufs@83200000'.reg[0] > > (0x83200000-0x835dffff). > > vm1 | VMM[vm]: Device creation for pfebufs@83200000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'pfebufs@835e0000'.reg[0] > > (0x835e0000-0x835fffff). > > vm1 | VMM[vm]: Device creation for pfebufs@835e0000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'ddr@85000000 > '.reg[0] > > (0x85000000-0x85000fff). > > vm1 | VMM[vm]: Device creation for ddr@85000000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'scmi' IRQ 332. > > vm1 | VMM[vm]: Device creation for scmi failed. Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'rtc@40060000 > '.reg[0] > > (0x40060000-0x40060fff). > > vm1 | VMM[vm]: Device creation for rtc@40060000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'syscon@4007c000'.reg[0] > > (0x4007c000-0x4007c0ff). > > vm1 | VMM[vm]: Device creation for syscon@4007c000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'ddr_gpr@4007c600'.reg[0] > > (0x4007c600-0x4007c61f). > > vm1 | VMM[vm]: Device creation for ddr_gpr@4007c600 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'nvram@4009c000'.reg[0] > > (0x4009c000-0x4009c00f). > > vm1 | VMM[vm]: Device creation for nvram@4009c000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'siul2-pinctrl@4009c240'.reg[0] (0x4009c240-0x4009c3d7). > > vm1 | VMM[vm]: Device creation for siul2-pinctrl@4009c240 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'siul2-gpio@4009d700'.reg[0] (0x4009d700-0x4009d70f). > > vm1 | VMM[vm]: Device creation for siul2-gpio@4009d700 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'nvram@44010000'.reg[0] > > (0x44010000-0x4401000f). > > vm1 | VMM[vm]: Device creation for nvram@44010000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'ocotp@400a4000'.reg[0] > > (0x400a4000-0x400a43ff). > > vm1 | VMM[vm]: Device creation for ocotp@400a4000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'tmu@400a8000 > '.reg[0] > > (0x400a8000-0x400aafff). > > vm1 | VMM[vm]: Device creation for tmu@400a8000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'watchdog@4010c000'.reg[0] > > (0x4010c000-0x4010cfff). > > vm1 | VMM[vm]: Device creation for watchdog@4010c000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'stm@4011c000 > '.reg[0] > > (0x4011c000-0x4011efff). > > vm1 | VMM[vm]: Device creation for stm@4011c000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'stm@40120000 > '.reg[0] > > (0x40120000-0x40122fff). > > vm1 | VMM[vm]: Device creation for stm@40120000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'spi@40134000 > '.reg[0] > > (0x0-0x1fffffff). > > vm1 | VMM[vm]: Device creation for spi@40134000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'dma-controller@40144000'.reg[0] (0x40144000-0x40167fff). > > vm1 | VMM[vm]: Device creation for dma-controller@40144000 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pit@40188000 > '.reg[0] > > (0x40188000-0x4018afff). > > vm1 | VMM[vm]: Device creation for pit@40188000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'mscm@40198000 > '.reg[0] > > (0x40198000-0x40198fff). > > vm1 | VMM[vm]: Device creation for mscm@40198000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'flexcan@401b4000'.reg[0] > > (0x401b4000-0x401bdfff). > > vm1 | VMM[vm]: Device creation for flexcan@401b4000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'serial@401c8000'.reg[0] > > (0x401c8000-0x401cafff). > > vm1 | VMM[vm]: Device creation for serial@401c8000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'serial@401cc000'.reg[0] > > (0x401cc000-0x401cefff). > > vm1 | VMM[vm]: Device creation for serial@401cc000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'spi@401d8000 > '.reg[0] > > (0x401d8000-0x401d8fff). > > vm1 | VMM[vm]: Device creation for spi@401d8000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'i2c@401e4000 > '.reg[0] > > (0x401e4000-0x401e4fff). > > vm1 | VMM[vm]: Device creation for i2c@401e4000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'i2c@401e8000 > '.reg[0] > > (0x401e8000-0x401e8fff). > > vm1 | VMM[vm]: Device creation for i2c@401e8000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'i2c@401ec000 > '.reg[0] > > (0x401ec000-0x401ecfff). > > vm1 | VMM[vm]: Device creation for i2c@401ec000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pwm@401f4000 > '.reg[0] > > (0x401f4000-0x401f4fff). > > vm1 | VMM[vm]: Device creation for pwm@401f4000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'adc@401f8000 > '.reg[0] > > (0x401f8000-0x401f8fff). > > vm1 | VMM[vm]: Device creation for adc@401f8000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'watchdog@40200000'.reg[0] > > (0x40200000-0x40200fff). > > vm1 | VMM[vm]: Device creation for watchdog@40200000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'watchdog@40204000'.reg[0] > > (0x40204000-0x40204fff). > > vm1 | VMM[vm]: Device creation for watchdog@40204000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'watchdog@40208000'.reg[0] > > (0x40208000-0x40208fff). > > vm1 | VMM[vm]: Device creation for watchdog@40208000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'mu0b@40210000 > '.reg[0] > > (0x40210000-0x40210fff). > > vm1 | VMM[vm]: Device creation for mu0b@40210000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'mu1b@40211000 > '.reg[0] > > (0x40211000-0x40211fff). > > vm1 | VMM[vm]: Device creation for mu1b@40211000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'mu2b@40212000 > '.reg[0] > > (0x40212000-0x40212fff). > > vm1 | VMM[vm]: Device creation for mu2b@40212000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'mu3b@40213000 > '.reg[0] > > (0x40213000-0x40213fff). > > vm1 | VMM[vm]: Device creation for mu3b@40213000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'stm@40228000 > '.reg[0] > > (0x40228000-0x4022afff). > > vm1 | VMM[vm]: Device creation for stm@40228000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'dma-controller@40244000'.reg[0] (0x40244000-0x40267fff). > > vm1 | VMM[vm]: Device creation for dma-controller@40244000 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pit@40288000 > '.reg[0] > > (0x40288000-0x4028afff). > > vm1 | VMM[vm]: Device creation for pit@40288000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'flexcan@402a8000'.reg[0] > > (0x402a8000-0x402b1fff). > > vm1 | VMM[vm]: Device creation for flexcan@402a8000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'flexcan@402b2000'.reg[0] > > (0x402b2000-0x402bbfff). > > vm1 | VMM[vm]: Device creation for flexcan@402b2000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'serial@402bc000'.reg[0] > > (0x402bc000-0x402befff). > > vm1 | VMM[vm]: Device creation for serial@402bc000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'spi@402d0000 > '.reg[0] > > (0x402d0000-0x402d0fff). > > vm1 | VMM[vm]: Device creation for spi@402d0000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'i2c@402dc000 > '.reg[0] > > (0x402dc000-0x402dcfff). > > vm1 | VMM[vm]: Device creation for i2c@402dc000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pwm@402e4000 > '.reg[0] > > (0x402e4000-0x402e4fff). > > vm1 | VMM[vm]: Device creation for pwm@402e4000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'adc@402e8000 > '.reg[0] > > (0x402e8000-0x402e8fff). > > vm1 | VMM[vm]: Device creation for adc@402e8000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'mmc@402f0000 > '.reg[0] > > (0x402f0000-0x402f0fff). > > vm1 | VMM[vm]: Device creation for mmc@402f0000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'fccu@4030c000 > '.reg[0] > > (0x4030c000-0x4030efff). > > vm1 | VMM[vm]: Device creation for fccu@4030c000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'ethernet@4033c000'.reg[0] > > (0x4033c000-0x4033dfff). > > vm1 | VMM[vm]: Device creation for ethernet@4033c000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'ddr_errata@403c0000'.reg[0] (0x403c0000-0x403c00ff). > > vm1 | VMM[vm]: Device creation for ddr_errata@403c0000 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'ddr-perf@403e0000'.reg[0] > > (0x403e0000-0x403e00ff). > > vm1 | VMM[vm]: Device creation for ddr-perf@403e0000 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pcie@40400000 > '.reg[0] > > (0x40400000-0x40400fff). > > vm1 | VMM[vm]: Device creation for pcie@40400000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'serdes@40480000'.reg[0] > > (0x40480000-0x40480107). > > vm1 | VMM[vm]: Device creation for serdes@40480000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pcie@44100000 > '.reg[0] > > (0x44100000-0x44100fff). > > vm1 | VMM[vm]: Device creation for pcie@44100000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'serdes@44180000'.reg[0] > > (0x44180000-0x44180107). > > vm1 | VMM[vm]: Device creation for serdes@44180000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pfe@46000000 > '.reg[0] > > (0x46000000-0x46ffffff). > > vm1 | VMM[vm]: Device creation for pfe@46000000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'llce_dte_sram@43000000'.reg[0] (0x43000000-0x43001fff). > > vm1 | VMM[vm]: Device creation for llce_dte_sram@43000000 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'llce_ppe_rx_sram@43100000'.reg[0] (0x43100000-0x43107fff). > > vm1 | VMM[vm]: Device creation for llce_ppe_rx_sram@43100000 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'llce_ppe_tx_sram@43200000'.reg[0] (0x43200000-0x43207fff). > > vm1 | VMM[vm]: Device creation for llce_ppe_tx_sram@43200000 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'llce_frpe_sram@43300000'.reg[0] (0x43300000-0x4330ffff). > > vm1 | VMM[vm]: Device creation for llce_frpe_sram@43300000 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'llce_shmem@43800000'.reg[0] (0x43800000-0x4384ffff). > > vm1 | VMM[vm]: Device creation for llce_shmem@43800000 failed. > > Disabling device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'llce@43a00000 > '.reg[0] > > (0x43ff8000-0x43ffbfff). > > vm1 | VMM[vm]: Device creation for llce@43a00000 failed. Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > 'usbmisc@44064200'.reg[0] > > (0x44064200-0x440643ff). > > vm1 | VMM[vm]: Device creation for usbmisc@44064200 failed. > Disabling > > device. > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'usb@44064000 > '.reg[0] > > (0x44064000-0x440641ff). > > vm1 | VMM[vm]: Device creation for usb@44064000 failed. Disabling > > device. > > vm1 | VMM[ram]: Cleaning caches for device tree [21ff2000-21fff728] > > ([b11f2000]) > > io | new iomem region: p=00000000000000 v=00000000400000 s=400000 > > (bmb=0x39bc0) > > io | map mem: p=00000000002000 v=00000000402000 s=2000 uncached: > > done(0) > > vm1 | VMM[]: Starting Cpu0 @ 0x91200000 in 64Bit mode (handler @ > > 1078e08, stack: 801ffba0, task: 420000, mpidr: 80000000 (orig: 80000000) > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01) > > vm1 | VMM[]: Starting Cpu1 @ 0x91ae7254 in 64Bit mode (handler @ > > 1078e08, stack: 400f20, task: 420000, mpidr: 80000001 (orig: 80000000) > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01) > > vm1 | VMM[]: Starting Cpu2 @ 0x91ae7254 in 64Bit mode (handler @ > > 1078e08, stack: 5fff20, task: 420000, mpidr: 80000100 (orig: 80000000) > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01) > > vm1 | VMM[]: Starting Cpu3 @ 0x91ae7254 in 64Bit mode (handler @ > > 1078e08, stack: 7fef20, task: 420000, mpidr: 80000101 (orig: 80000000) > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01) > > vm1 | [ 0.000000] Booting Linux on physical CPU 0x0000000000 > > [0x410fd034] > > vm1 | [ 0.000000] Linux version 5.15.119-rt65+ge18f05316cd9 > > (oe-user@oe-host) (aarch64-fsl-linux-gcc (GCC) 11.3.0, GNU ld (GNU > > Binutils) 2.38.20220708) #1 SMP PREEMPT Fri Sep 15 16:46:03 UTC 2023 > > vm1 | [ 0.000000] Machine model: NXP S32G2XXX-EVB > > vm1 | [ 0.000000] Zone ranges: > > vm1 | [ 0.000000] DMA [mem > > 0x0000000091200000-0x00000000b11fffff] > > vm1 | [ 0.000000] DMA32 empty > > vm1 | [ 0.000000] Normal empty > > vm1 | [ 0.000000] Movable zone start for each node > > vm1 | [ 0.000000] Early memory node ranges > > vm1 | [ 0.000000] node 0: [mem > > 0x0000000091200000-0x00000000b11fffff] > > vm1 | [ 0.000000] Initmem setup node 0 [mem > > 0x0000000091200000-0x00000000b11fffff] > > vm1 | [ 0.000000] On node 0, zone DMA: 4608 pages in unavailable > > ranges > > vm1 | [ 0.000000] On node 0, zone DMA: 28160 pages in unavailable > > ranges > > vm1 | [ 0.000000] cma: Reserved 256 MiB at 0x000000009e800000 > > vm1 | [ 0.000000] psci: probing for conduit method from DT. > > vm1 | [ 0.000000] psci: PSCIv1.0 detected in firmware. > > vm1 | [ 0.000000] psci: Using standard PSCI v0.2 function IDs > > vm1 | [ 0.000000] psci: Trusted OS migration not required > > vm1 | [ 0.000000] psci: SMC Calling Convention v1.0 > > vm1 | [ 0.000000] percpu: Embedded 18 pages/cpu s34200 r8192 > d31336 > > u73728 > > vm1 | [ 0.000000] Detected VIPT I-cache on CPU0 > > vm1 | [ 0.000000] CPU features: detected: GIC system register CPU > > interface > > vm1 | [ 0.000000] CPU features: detected: ARM erratum 845719 > > vm1 | [ 0.000000] CPU features: detected: ARM errata 1165522, > > 1319367, 1530923, or 1530924 > > vm1 | [ 0.000000] Built 1 zonelists, mobility grouping on. Total > > pages: 129280 > > vm1 | [ 0.000000] Kernel command line: console=ttyAMA0 > earlyprintk=1 > > rdinit=/init > > vm1 | [ 0.000000] Unknown kernel command line parameters > > "earlyprintk=1", will be passed to user space. > > vm1 | [ 0.000000] Dentry cache hash table entries: 65536 (order: > 7, > > 524288 bytes, linear) > > vm1 | [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, > > 262144 bytes, linear) > > vm1 | [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap > > free:off > > vm1 | [ 0.000000] Memory: 207244K/524288K available (9088K kernel > > code, 642K rwdata, 3036K rodata, 1344K init, 220K bss, 54900K reserved, > > 262144K cma-reserved) > > vm1 | [ 0.000000] rcu: Preemptible hierarchical RCU > implementation. > > vm1 | [ 0.000000] rcu: RCU event tracing is enabled. > > vm1 | [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to > > nr_cpu_ids=4. > > vm1 | [ 0.000000] Trampoline variant of Tasks RCU enabled. > > vm1 | [ 0.000000] Tracing variant of Tasks RCU enabled. > > vm1 | [ 0.000000] rcu: RCU calculated value of > scheduler-enlistment > > delay is 25 jiffies. > > vm1 | [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, > > nr_cpu_ids=4 > > vm1 | [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > > vm1 | [ 0.000000] GICv3: 988 SPIs implemented > > vm1 | [ 0.000000] GICv3: 0 Extended SPIs implemented > > vm1 | [ 0.000000] GICv3: Distributor has no Range Selector support > > vm1 | [ 0.000000] Root IRQ handler: gic_handle_irq > > vm1 | [ 0.000000] GICv3: 16 PPIs implemented > > vm1 | [ 0.000000] GICv3: CPU0: found redistributor 0 region > > 0:0x0000000050880000 > > vm1 | [ 0.000000] arch_timer: cp15 timer(s) running at 5.00MHz > > (virt). > > vm1 | [ 0.000000] clocksource: arch_sys_counter: mask: > > 0xffffffffffffff max_cycles: 0x127350b88, max_idle_ns: 440795202120 ns > > vm1 | [ 0.000001] sched_clock: 56 bits at 5MHz, resolution 200ns, > > wraps every 4398046511100ns > > vm1 | [ 0.000638] Console: colour dummy device 80x25 > > vm1 | [ 0.000683] Calibrating delay loop (skipped), value > calculated > > using timer frequency.. 10.00 BogoMIPS (lpj=20000) > > vm1 | [ 0.000697] pid_max: default: 32768 minimum: 301 > > vm1 | [ 0.000887] Mount-cache hash table entries: 1024 (order: 1, > > 8192 bytes, linear) > > vm1 | [ 0.000899] Mountpoint-cache hash table entries: 1024 > (order: > > 1, 8192 bytes, linear) > > vm1 | [ 0.002629] rcu: Hierarchical SRCU implementation. > > vm1 | [ 0.003552] smp: Bringing up secondary CPUs ... > > vm1 | [ 0.017897] Detected VIPT I-cache on CPU1 > > vm1 | [ 0.017963] GICv3: CPU1: found redistributor 1 region > > 0:0x00000000508a0000 > > vm1 | [ 0.018124] CPU1: Booted secondary processor 0x0000000001 > > [0x410fd034] > > vm1 | [ 0.038864] Detected VIPT I-cache on CPU2 > > vm1 | [ 0.038925] GICv3: CPU2: found redistributor 100 region > > 0:0x00000000508c0000 > > vm1 | [ 0.039068] CPU2: Booted secondary processor 0x0000000100 > > [0x410fd034] > > vm1 | [ 0.059640] Detected VIPT I-cache on CPU3 > > vm1 | [ 0.059684] GICv3: CPU3: found redistributor 101 region > > 0:0x00000000508e0000 > > vm1 | [ 0.059796] CPU3: Booted secondary processor 0x0000000101 > > [0x410fd034] > > vm1 | [ 0.066434] smp: Brought up 1 node, 4 CPUs > > vm1 | [ 0.066445] SMP: Total of 4 processors activated. > > vm1 | [ 0.066450] CPU features: detected: 32-bit EL0 Support > > vm1 | [ 0.066456] CPU features: detected: CRC32 instructions > > vm1 | [ 0.076601] CPU: All CPU(s) started at EL1 > > vm1 | [ 0.076655] alternatives: patching kernel code > > vm1 | [ 0.077714] devtmpfs: initialized > > vm1 | [ 0.086718] clocksource: jiffies: mask: 0xffffffff > max_cycles: > > 0xffffffff, max_idle_ns: 7645041785100000 ns > > vm1 | [ 0.086746] futex hash table entries: 1024 (order: 4, 65536 > > bytes, linear) > > vm1 | [ 0.095444] pinctrl core: initialized pinctrl subsystem > > vm1 | [ 0.096442] NET: Registered PF_NETLINK/PF_ROUTE protocol > family > > vm1 | [ 0.098184] DMA: preallocated 128 KiB GFP_KERNEL pool for > > atomic allocations > > vm1 | [ 0.098363] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA > pool > > for atomic allocations > > vm1 | [ 0.098516] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 > > pool for atomic allocations > > vm1 | [ 0.098979] thermal_sys: Registered thermal governor > > 'step_wise' > > vm1 | [ 0.099686] hw-breakpoint: found 6 breakpoint and 4 > watchpoint > > registers. > > vm1 | [ 0.100036] ASID allocator initialised with 65536 entries > > vm1 | [ 0.100142] Serial: AMBA PL011 UART driver > > vm1 | [ 0.101471] 12000.pl011_uart: ttyAMA0 at MMIO 0x12000 (irq = > > 14, base_baud = 0) is a PL011 rev3 > > vm1 | [ 0.101515] printk: console [ttyAMA0] enabled > > vm1 | [ 0.108150] HugeTLB registered 1.00 GiB page size, > > pre-allocated 0 pages > > vm1 | [ 0.108163] HugeTLB registered 32.0 MiB page size, > > pre-allocated 0 pages > > vm1 | [ 0.108168] HugeTLB registered 2.00 MiB page size, > > pre-allocated 0 pages > > vm1 | [ 0.108175] HugeTLB registered 64.0 KiB page size, > > pre-allocated 0 pages > > vm1 | [ 0.110016] vgaarb: loaded > > vm1 | [ 0.110204] SCSI subsystem initialized > > vm1 | [ 0.110378] usbcore: registered new interface driver usbfs > > vm1 | [ 0.110412] usbcore: registered new interface driver hub > > vm1 | [ 0.110446] usbcore: registered new device driver usb > > vm1 | [ 0.110742] pps_core: LinuxPPS API ver. 1 registered > > vm1 | [ 0.110746] pps_core: Software ver. 5.3.6 - Copyright > > 2005-2007 Rodolfo Giometti <[email protected]> > > vm1 | [ 0.110761] PTP clock support registered > > vm1 | [ 0.111890] clocksource: Switched to clocksource > > arch_sys_counter > > vm1 | [ 0.120290] NET: Registered PF_INET protocol family > > vm1 | [ 0.120433] IP idents hash table entries: 8192 (order: 4, > > 65536 bytes, linear) > > vm1 | [ 0.120940] tcp_listen_portaddr_hash hash table entries: 256 > > (order: 0, 4096 bytes, linear) > > vm1 | [ 0.120958] Table-perturb hash table entries: 65536 (order: > 6, > > 262144 bytes, linear) > > vm1 | [ 0.120970] TCP established hash table entries: 4096 (order: > > 3, 32768 bytes, linear) > > vm1 | [ 0.121009] TCP bind hash table entries: 4096 (order: 4, > 65536 > > bytes, linear) > > vm1 | [ 0.121084] TCP: Hash tables configured (established 4096 > bind > > 4096) > > vm1 | [ 0.121170] UDP hash table entries: 256 (order: 1, 8192 > bytes, > > linear) > > vm1 | [ 0.121192] UDP-Lite hash table entries: 256 (order: 1, 8192 > > bytes, linear) > > vm1 | [ 0.121352] NET: Registered PF_UNIX/PF_LOCAL protocol family > > vm1 | [ 0.122014] RPC: Registered named UNIX socket transport > module. > > vm1 | [ 0.122020] RPC: Registered udp transport module. > > vm1 | [ 0.122023] RPC: Registered tcp transport module. > > vm1 | [ 0.122025] RPC: Registered tcp NFSv4.1 backchannel > transport > > module. > > vm1 | [ 0.122035] PCI: CLS 0 bytes, default 64 > > vm1 | [ 0.122356] Unpacking initramfs... > > vm1 | [ 1.620548] Freeing initrd memory: 25676K > > vm1 | [ 1.625720] workingset: timestamp_bits=62 max_order=17 > > bucket_order=0 > > vm1 | [ 1.626779] fuse: init (API version 7.34) > > vm1 | [ 1.626982] NET: Registered PF_ALG protocol family > > vm1 | [ 1.627045] Block layer SCSI generic (bsg) driver version > 0.4 > > loaded (major 248) > > vm1 | [ 1.627052] io scheduler mq-deadline registered > > vm1 | [ 1.627056] io scheduler kyber registered > > vm1 | [ 1.631965] vcan: Virtual CAN interface driver > > vm1 | [ 1.631980] slcan: serial line CAN interface driver > > vm1 | [ 1.631982] slcan: 10 dynamic interface channels. > > vm1 | [ 1.631990] CAN device driver interface > > vm1 | [ 1.632058] e100: Intel(R) PRO/100 Network Driver > > vm1 | [ 1.632061] e100: Copyright(c) 1999-2006 Intel Corporation > > vm1 | [ 1.632098] e1000: Intel(R) PRO/1000 Network Driver > > vm1 | [ 1.632102] e1000: Copyright (c) 1999-2006 Intel > Corporation. > > vm1 | [ 1.632138] e1000e: Intel(R) PRO/1000 Network Driver > > vm1 | [ 1.632141] e1000e: Copyright(c) 1999 - 2015 Intel > Corporation. > > vm1 | [ 1.632171] igb: Intel(R) Gigabit Ethernet Network Driver > > vm1 | [ 1.632176] igb: Copyright (c) 2007-2014 Intel Corporation. > > vm1 | [ 1.632523] ehci_hcd: USB 2.0 'Enhanced' Host Controller > > (EHCI) Driver > > vm1 | [ 1.632531] ehci-pci: EHCI PCI platform driver > > vm1 | [ 1.632753] usbcore: registered new interface driver uas > > vm1 | [ 1.632791] usbcore: registered new interface driver > > usb-storage > > vm1 | [ 1.633272] i2c_dev: i2c /dev entries driver > > vm1 | [ 1.633467] sdhci: Secure Digital Host Controller Interface > > driver > > vm1 | [ 1.633470] sdhci: Copyright(c) Pierre Ossman > > vm1 | [ 1.633472] sdhci-pltfm: SDHCI platform and OF driver helper > > vm1 | [ 1.633661] usbcore: registered new interface driver usbhid > > vm1 | [ 1.633666] usbhid: USB HID core driver > > vm1 | [ 1.634177] NET: Registered PF_INET6 protocol family > > vm1 | [ 1.635090] Segment Routing with IPv6 > > vm1 | [ 1.635128] In-situ OAM (IOAM) with IPv6 > > vm1 | [ 1.635182] sit: IPv6, IPv4 and MPLS over IPv4 tunneling > driver > > vm1 | [ 1.635654] NET: Registered PF_PACKET protocol family > > vm1 | [ 1.635859] can: controller area network core > > vm1 | [ 1.635895] NET: Registered PF_CAN protocol family > > vm1 | [ 1.635900] can: raw protocol > > vm1 | [ 1.635906] can: broadcast manager protocol > > vm1 | [ 1.635933] can: netlink gateway - max_hops=1 > > vm1 | [ 1.635965] 8021q: 802.1Q VLAN Support v1.8 > > vm1 | [ 1.636238] printk: console [ttyAMA0]: printing thread > started > > vm1 | [ 1.707129] uart-pl011 12000.pl011_uart: no DMA platform > data > > vm1 | [ 1.753286] Freeing unused kernel memory: 1344K > > > > > > On Thu, Feb 20, 2025 at 9:48 PM Philipp Eppelt < > > [email protected]> wrote: > > > > > Hi Qiang, > > > > > > I see these lines in the linux boot output, which make me wonder, if > the > > > VM has > > > enough RAM: > > > > > > > vm1 | [ 0.000000] cma: Failed to reserve 256 MiB > > > > [...] > > > > vm1 | [ 0.112053] Unpacking initramfs... > > > > vm1 | [ 0.946302] Initramfs unpacking failed: write error > > > > vm1 | [ 0.959998] Freeing initrd memory: 25676K > > > > > > Please increase the amount of RAM for the VM. Currently, your > uvmm-io.ned > > > specifies 128MB. Please try 512MB or more. > > > > > > Cheers, > > > Philipp > > > > > > > > > Am 20.02.25 um 12:20 PM schrieb qiang xu: > > > > Hi Adam， > > > > > > > > I would like to sincerely thank you again for your help. According to > > > what you > > > > said, I have added the UART to the device tree, and I can now see the > > > system > > > > startup prints. However, it seems that the kernel cannot find the > > > rootfs. What > > > > should I configure in L4? Have I missed any configurations? > > > > > > > > fatload mmc 0 0x8000e000 l4re_uvmm-io.uimage > > > > 46235855 bytes read in 1971 ms (22.4 MiB/s) > > > > => fatload mmc 0 0x80000000 s32g2xxa-evb.dtb1 > > > > 54149 bytes read in 17 ms (3 MiB/s) > > > > => bootm 0x8000e000 - 0x80000000 > > > > ## Booting kernel from Legacy Image at 8000e000 ... > > > > Image Name: L4 Image #26 > > > > Image Type: AArch64 Linux Kernel Image (uncompressed) > > > > Data Size: 46235791 Bytes = 44.1 MiB > > > > Load Address: 91000000 > > > > Entry Point: 91000000 > > > > Verifying Checksum ... OK > > > > ## Flattened Device Tree blob at 80000000 > > > > Booting using the fdt blob at 0x80000000 > > > > Loading Kernel Image > > > > Using Device Tree in place at 0000000080000000, end > 0000000080010384 > > > > fixup: pfe0 set to 00:01:be:be:ef:11 > > > > fixup: pfe1 set to 00:01:be:be:ef:22 > > > > fixup: pfe2 set to 00:01:be:be:ef:33 > > > > > > > > Starting kernel ... > > > > > > > > > > > > L4 Bootstrapper > > > > Build: #26 Thu Feb 20 19:07:32 CST 2025, 11.4.0 > > > > RAM: 0000000080000000 - 00000000ffffffff: 2097152kB > > > > RAM: 0000000880000000 - 00000008dfffffff: 1572864kB > > > > Total RAM: 3584MB > > > > Scanning fiasco > > > > Scanning sigma0 > > > > Scanning moe > > > > Moving up to 15 modules behind 81300000 > > > > moving module 00 { 9101f000-910e5fe7 } -> { 8600a000-860d0fe7 } > > > [815080] > > > > moving module 01 { 910e6000-910ebcd7 } -> { 860d1000-860d6cd7 } > > > [23768] > > > > moving module 02 { 910ec000-9111e6cf } -> { 860d7000-861096cf } > > > [206544] > > > > moving module 03 { 9111f000-9121258f } -> { 8610a000-861fd58f } > > > [996752] > > > > moving module 04 { 91213000-9122e537 } -> { 861fe000-86219537 } > > > [111928] > > > > moving module 05 { 9122f000-912b7aa7 } -> { 8621a000-862a2aa7 } > > > [559784] > > > > moving module 06 { 912b8000-912c5384 } -> { 862a3000-862b0384 } > > > [54149] > > > > moving module 07 { 912c6000-92bd9a52 } -> { 862b1000-87bc4a52 } > > > [26294867] > > > > moving module 08 { 92bda000-92bdb218 } -> { 87bc5000-87bc6218 } > [4633] > > > > moving module 09 { 92bdc000-92bdc29a } -> { 87bc7000-87bc729a } > [667] > > > > moving module 10 { 92bdd000-939bd807 } -> { 87bc8000-889a8807 } > > > [14551048] > > > > moving module 11 { 939be000-93a03faf } -> { 889a9000-889eefaf } > > > [286640] > > > > moving module 12 { 93a04000-93c16a87 } -> { 889ef000-88c01a87 } > > > [2173576] > > > > moving module 13 { 93c17000-93c171f7 } -> { 88c02000-88c021f7 } > [504] > > > > moving module 14 { 93c18000-93c1808e } -> { 88c03000-88c0308e } > [143] > > > > Loading fiasco > > > > found node 0 kernel info page (via ELF) at 0x80203000 > > > > Loading sigma0 > > > > Loading moe > > > > found node 0 kernel options (via ELF) at 0x80204000 > > > > Sigma0 config node: 0 ip:860003f4 > > > > Roottask config node: 0 ip:80841904 > > > > Regions of list 'regions' > > > > [ 34000000, 3407ffff] { 80000} Arch pfebufs@34000000 > > > > [ 34080000, 3409ffff] { 20000} Arch pfebufs@34080000 > > > > [ 80000000, 8000dfff] { e000} Root dtb > > > > [ 8000e000, 8000efff] { 1000} Root mbi_rt > > > > [ 80201000, 80205847] { 4848} Kern fiasco > > > > [ 80400000, 8061dfff] { 21e000} Kern fiasco > > > > [ 80840000, 8087d817] { 3d818} Root moe > > > > [ 83200000, 835dffff] { 3e0000} Arch pfebufs@83200000 > > > > [ 835e0000, 835fffff] { 20000} Arch pfebufs@835e0000 > > > > [ 84000000, 843fffff] { 400000} Arch shm@84000000 > > > > [ 85000000, 85000fff] { 1000} Arch ddr@85000000 > > > > [ 86000000, 8600946f] { 9470} Sigma0 sigma0 > > > > [ 8610a000, 88c0308e] { 2af908f} Root Module > > > > [ 91000158, 91000187] { 30} Root cpu_boot > > > > [ 9101e1d0, 9101ecdc] { b0d} Boot modinfo > > > > [ c0000000, c03fffff] { 400000} Arch shm@c0000000 > > > > [ c0400000, c07fffff] { 400000} Arch shm@c0400000 > > > > [ d0000000, d000007f] { 80} Arch shm@d0000000 > > > > [ d0000080, d00000ff] { 80} Arch shm@d0000080 > > > > [ ff800000, ff9fffff] { 200000} Arch atf@ff800000 > > > > Starting kernel fiasco at 80201190 > > > > Hello from Startup::stage2 > > > > Reserved 216 MiB as kernel memory. > > > > Number of IRQs available at this GIC: 576 > > > > CPU0: GIC Redistributor at ffff00480000 for 0x0 > > > > Detecting PSCI ... > > > > Detected PSCI v1.1 > > > > PSCI: CPU_SUSPEND format original v0.2, does not support OS-initiated > > > mode > > > > PSCI: TOS: Not present or not required. > > > > FPU: Initialize > > > > ARM generic timer: freq=5000000 interval=5000 cnt=339090240 > > > > SERIAL ESC: allocated IRQ 114 for serial uart > > > > Not using serial hack in slow timer handler. > > > > Welcome to the L4Re Microkernel! > > > > L4Re Microkernel on arm-64 > > > > Rev: unknown compiled with gcc 11.4.0 for NXP S32G [] > > > > Build: #12 Tue Feb 18 14:17:13 CST 2025 > > > > > > > > Cache config: ON > > > > CPU1: GIC Redistributor at ffff004a0000 for 0x1 > > > > CPU1: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000 > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000 > > > > CPU2: GIC Redistributor at ffff004c0000 for 0x100 > > > > CPU2: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000 > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000 > > > > CPU3: GIC Redistributor at ffff004e0000 for 0x101 > > > > Calibrating timer loop... > > > > CPU3: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000 > > > > ID_MMFR[04]: 00001122 00000000 00000000 00000000 > > > > Timer calibration done. > > > > MDB: use page size: 30 > > > > MDB: use page size: 21 > > > > MDB: use page size: 12 > > > > SIGMA0: Hello! > > > > KIP @ 80203000 > > > > allocated 4KB for maintenance structures > > > > SIGMA0: Dump of all resource maps > > > > RAM:------------------------ > > > > [4:---:80000000;8000dfff] > > > > [4:RWX:8000e000;8000efff] > > > > [0:RWX:8000f000;80200fff] > > > > [0:RWX:80206000;803fffff] > > > > [0:RWX:8061e000;8083ffff] > > > > [4:RWX:80840000;8087dfff] > > > > [0:RWX:8087e000;831fffff] > > > > [0:RWX:83600000;83ffffff] > > > > [0:RWX:84400000;84ffffff] > > > > [0:RWX:85001000;85ffffff] > > > > [0:RWX:8600a000;86109fff] > > > > [4:RWX:8610a000;88c03fff] > > > > [0:RWX:88c04000;90ffffff] > > > > [4:---:91000000;91000fff] > > > > [0:RWX:91001000;bfffffff] > > > > [0:RWX:c0800000;cfffffff] > > > > [0:RWX:d0001000;ff7fffff] > > > > [0:RWX:ffa00000;ffffffff] > > > > [0:RWX:880000000;8d27fffff] > > > > IOMEM:---------------------- > > > > [0:RW-:0;7fffffff] > > > > [0:RW-:83200000;835fffff] > > > > [0:RW-:84000000;843fffff] > > > > [0:RW-:85000000;85000fff] > > > > [0:RW-:c0000000;c07fffff] > > > > [0:RW-:d0000000;d0000fff] > > > > [0:RW-:ff800000;ff9fffff] > > > > [0:RW-:100000000;87fffffff] > > > > [0:RW-:8e0000000;ffffffffffffffff] > > > > MOE: Hello world > > > > MOE: found 3383848 KByte free memory > > > > MOE: found RAM from 8000f000 to 8d2800000 > > > > MOE: allocated 34088 KByte for the page array @0x8087e000 > > > > MOE: virtual user address space [0-ffffffffff] > > > > MOE: cmdline: moe rom/uvmm-io.ned > > > > MOE: rom name space cap -> [C:103000] > > > > MOE: rwfs name space cap -> [C:105000] > > > > ROMFS: [8610a000-861fd590] [C:107000] uvmm > > > > ROMFS: [861fe000-86219538] [C:109000] l4re > > > > ROMFS: [8621a000-862a2aa8] [C:10b000] ned > > > > ROMFS: [862a3000-862b0385] [C:10d000] s32g2xxa-evb.dtb1 > > > > ROMFS: [862b1000-87bc4a53] [C:10f000] > > > fsl-image-dom0less-s32g274aevb.cpio.gz > > > > ROMFS: [87bc5000-87bc6219] [C:111000] vmm.lua > > > > ROMFS: [87bc7000-87bc729b] [C:113000] uvmm-io.ned > > > > ROMFS: [87bc8000-889a8808] [C:115000] Image > > > > ROMFS: [889a9000-889eefb0] [C:117000] cons > > > > ROMFS: [889ef000-88c01a88] [C:119000] io > > > > ROMFS: [88c02000-88c021f8] [C:11b000] io.cfg > > > > ROMFS: [88c03000-88c0308f] [C:11d000] vm_hw.vbus > > > > ROMFS: [80000000-8000e000] [C:11f000] .fdt > > > > MOE: Starting: rom/ned rom/uvmm-io.ned > > > > MOE: loading 'rom/ned' > > > > Ned says: Hi World! > > > > Ned: loading file: 'rom/uvmm-io.ned' > > > > Console Server > > > > cons> > > > > Created vcon channel: io [420010] > > > > cons> > > > > io | Io service > > > > io | Verboseness level: 7 > > > > io | unused physical memory space: > > > > > > > > Created vcon channel: vm1 [421010] > > > > cons> > > > > io | [00000000000000-00000033ffffff] > > > > > > > > Created vcon channel: mon1 [422010] > > > > cons> > > > > io | [000000340a0000-0000007fffffff] > > > > io | [00000100000000-0000087fffffff] > > > > io | [000008e0000000-ffffffffffffffff] > > > > io | no 'iommu' capability found, using CPU-phys for DMA > > > > io | Loading: config 'rom/io.cfg' > > > > io | Loading: config 'rom/vm_hw.vbus' > > > > io | Add IRQ resources to vbus: IRQ > > > [00000000000007-00000000000007 1] > > > > level high (align=0 flags=3000) > > > > io | Add IRQ resources to vbus: IRQ > > > [00000000000079-00000000000079 1] > > > > raising edge (align=0 flags=10) > > > > io | vm_hw: [N12_GLOBAL__N_112Virtual_sbusE] > > > > io | Resources: ==== start ==== > > > > io | Resources: ===== end ===== > > > > io | L4ICU: [N2Vi6Sw_icuE] > > > > io | Resources: ==== start ==== > > > > io | Resources: ===== end ===== > > > > io | PMU: [N2Vi9Proxy_devE] > > > > io | Resources: ==== start ==== > > > > io | IRQ [00000000000007-00000000000007 1] level high > > > (align=0 > > > > flags=300001) > > > > io | Resources: ===== end ===== > > > > io | UART0: [N2Vi9Proxy_devE] > > > > io | Resources: ==== start ==== > > > > io | IRQ [00000000000079-00000000000079 1] raising edge > > > (align=0 > > > > flags=100001) > > > > io | IOMEM [00000000002000-00000000003000 1001] 32-bit > > > non-pref > > > > (align=1000 flags=300002) > > > > io | Resources: ===== end ===== > > > > io | Real Hardware ----------------------------------- > > > > io | System Bus: > > > > io | Resources: ==== start ==== > > > > io | DMADOM [00000000000000-00000000000000 1] (align=0 > flags=6) > > > > io | Resources: ===== end ===== > > > > io | pmu: > > > > io | compatible= { "arm,armv8-pmuv3" } > > > > io | Clients: ===== start ==== > > > > io | PMU: [N2Vi9Proxy_devE] > > > > io | Clients: ===== end ==== > > > > io | Resources: ==== start ==== > > > > io | IRQ [00000000000007-00000000000007 1] level high > > > (align=0 > > > > flags=300001) > > > > io | Resources: ===== end ===== > > > > io | uart0: > > > > io | compatible= { "arm,pl011" } > > > > io | Clients: ===== start ==== > > > > io | UART0: [N2Vi9Proxy_devE] > > > > io | Clients: ===== end ==== > > > > io | Resources: ==== start ==== > > > > io | IRQ [00000000000079-00000000000079 1] raising edge > > > (align=0 > > > > flags=100001) > > > > io | IOMEM [00000000002000-00000000003000 1001] 32-bit > > > non-pref > > > > (align=1000 flags=300002) > > > > io | Resources: ===== end ===== > > > > io | warning: could not register control interface at cap > > > 'platform_ctl' > > > > io | Ready. Waiting for request. > > > > io | vbus vm_hw does not support a global DMA domain > > > > vm1 | VMM[main]: Hello out there. > > > > vm1 | VMM[ram]: No memory nodes found, setting up default region > > > > vm1 | Command line: console=ttyAMA0 earlyprintk=1 rdinit=/init > > > > vm1 | VMM[]: [email protected],virtiocap: capability net is > > > invalid. > > > > vm1 | VMM[vm]: Device creation for virtual device > virtio_net@10000 > > > failed. > > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'pmu' IRQ > 23. > > > > vm1 | VMM[vm]: Device creation for pmu failed. Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'shm@c0000000'.reg[0] > > > > > > > (0xc0000000-0xc03fffff). > > > > vm1 | VMM[vm]: Device creation for shm@c0000000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'shm@c0400000'.reg[0] > > > > > > > (0xc0400000-0xc07fffff). > > > > vm1 | VMM[vm]: Device creation for shm@c0400000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'shm@d0000000'.reg[0] > > > > > > > (0xd0000000-0xd000007f). > > > > vm1 | VMM[vm]: Device creation for shm@d0000000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'shm@d0000080'.reg[0] > > > > > > > (0xd0000080-0xd00000ff). > > > > vm1 | VMM[vm]: Device creation for shm@d0000080 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'shm@84000000'.reg[0] > > > > > > > (0x84000000-0x843fffff). > > > > vm1 | VMM[vm]: Device creation for shm@84000000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'pfebufs@34000000'.reg[0] (0x34000000-0x3407ffff). > > > > vm1 | VMM[vm]: Device creation for pfebufs@34000000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'pfebufs@34080000'.reg[0] (0x34080000-0x3409ffff). > > > > vm1 | VMM[vm]: Device creation for pfebufs@34080000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'pfebufs@83200000'.reg[0] (0x83200000-0x835dffff). > > > > vm1 | VMM[vm]: Device creation for pfebufs@83200000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'pfebufs@835e0000'.reg[0] (0x835e0000-0x835fffff). > > > > vm1 | VMM[vm]: Device creation for pfebufs@835e0000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'ddr@85000000'.reg[0] > > > > > > > (0x85000000-0x85000fff). > > > > vm1 | VMM[vm]: Device creation for ddr@85000000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'scmi' IRQ > 332. > > > > vm1 | VMM[vm]: Device creation for scmi failed. Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'rtc@40060000'.reg[0] > > > > > > > (0x40060000-0x40060fff). > > > > vm1 | VMM[vm]: Device creation for rtc@40060000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'syscon@4007c000'.reg[0] (0x4007c000-0x4007c0ff). > > > > vm1 | VMM[vm]: Device creation for syscon@4007c000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'ddr_gpr@4007c600'.reg[0] (0x4007c600-0x4007c61f). > > > > vm1 | VMM[vm]: Device creation for ddr_gpr@4007c600 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'nvram@4009c000'.reg[0] > > > > > > > (0x4009c000-0x4009c00f). > > > > vm1 | VMM[vm]: Device creation for nvram@4009c000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'siul2- > > > > pinctrl@4009c240'.reg[0] (0x4009c240-0x4009c3. > > > > vm1 | VMM[vm]: Device creation for siul2-pinctrl@4009c240 > failed. > > > Disabling > > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'siul2- > > > > gpio@4009d700'.reg[0] (0x4009d700-0x4009d70f). > > > > vm1 | VMM[vm]: Device creation for siul2-gpio@4009d700 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'nvram@44010000'.reg[0] > > > > > > > (0x44010000-0x4401000f). > > > > vm1 | VMM[vm]: Device creation for nvram@44010000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'ocotp@400a4000'.reg[0] > > > > > > > (0x400a4000-0x400a43ff). > > > > vm1 | VMM[vm]: Device creation for ocotp@400a4000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'tmu@400a8000'.reg[0] > > > > > > > (0x400a8000-0x400aafff). > > > > vm1 | VMM[vm]: Device creation for tmu@400a8000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'watchdog@4010c000'.reg[0] (0x4010c000-0x4010cfff). > > > > vm1 | VMM[vm]: Device creation for watchdog@4010c000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'stm@4011c000'.reg[0] > > > > > > > (0x4011c000-0x4011efff). > > > > vm1 | VMM[vm]: Device creation for stm@4011c000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'stm@40120000'.reg[0] > > > > > > > (0x40120000-0x40122fff). > > > > vm1 | VMM[vm]: Device creation for stm@40120000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'spi@40134000'.reg[0] > > > > > > > (0x0-0x1fffffff). > > > > vm1 | VMM[vm]: Device creation for spi@40134000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'dma- > > > > controller@40144000'.reg[0] (0x40144000-0x40167. > > > > vm1 | VMM[vm]: Device creation for dma-controller@40144000 > failed. > > > Disabling > > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'pit@40188000'.reg[0] > > > > > > > (0x40188000-0x4018afff). > > > > vm1 | VMM[vm]: Device creation for pit@40188000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'mscm@40198000'.reg[0] > > > > > > > (0x40198000-0x40198fff). > > > > vm1 | VMM[vm]: Device creation for mscm@40198000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'flexcan@401b4000'.reg[0] (0x401b4000-0x401bdfff). > > > > vm1 | VMM[vm]: Device creation for flexcan@401b4000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'serial@401c8000'.reg[0] (0x401c8000-0x401cafff). > > > > vm1 | VMM[vm]: Device creation for serial@401c8000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'serial@401cc000'.reg[0] (0x401cc000-0x401cefff). > > > > vm1 | VMM[vm]: Device creation for serial@401cc000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'spi@401d8000'.reg[0] > > > > > > > (0x401d8000-0x401d8fff). > > > > vm1 | VMM[vm]: Device creation for spi@401d8000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'i2c@401e4000'.reg[0] > > > > > > > (0x401e4000-0x401e4fff). > > > > vm1 | VMM[vm]: Device creation for i2c@401e4000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'i2c@401e8000'.reg[0] > > > > > > > (0x401e8000-0x401e8fff). > > > > vm1 | VMM[vm]: Device creation for i2c@401e8000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'i2c@401ec000'.reg[0] > > > > > > > (0x401ec000-0x401ecfff). > > > > vm1 | VMM[vm]: Device creation for i2c@401ec000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'pwm@401f4000'.reg[0] > > > > > > > (0x401f4000-0x401f4fff). > > > > vm1 | VMM[vm]: Device creation for pwm@401f4000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'adc@401f8000'.reg[0] > > > > > > > (0x401f8000-0x401f8fff). > > > > vm1 | VMM[vm]: Device creation for adc@401f8000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'watchdog@40200000'.reg[0] (0x40200000-0x40200fff). > > > > vm1 | VMM[vm]: Device creation for watchdog@40200000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'watchdog@40204000'.reg[0] (0x40204000-0x40204fff). > > > > vm1 | VMM[vm]: Device creation for watchdog@40204000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'watchdog@40208000'.reg[0] (0x40208000-0x40208fff). > > > > vm1 | VMM[vm]: Device creation for watchdog@40208000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'mu0b@40210000'.reg[0] > > > > > > > (0x40210000-0x40210fff). > > > > vm1 | VMM[vm]: Device creation for mu0b@40210000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'mu1b@40211000'.reg[0] > > > > > > > (0x40211000-0x40211fff). > > > > vm1 | VMM[vm]: Device creation for mu1b@40211000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'mu2b@40212000'.reg[0] > > > > > > > (0x40212000-0x40212fff). > > > > vm1 | VMM[vm]: Device creation for mu2b@40212000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'mu3b@40213000'.reg[0] > > > > > > > (0x40213000-0x40213fff). > > > > vm1 | VMM[vm]: Device creation for mu3b@40213000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'stm@40228000'.reg[0] > > > > > > > (0x40228000-0x4022afff). > > > > vm1 | VMM[vm]: Device creation for stm@40228000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'dma- > > > > controller@40244000'.reg[0] (0x40244000-0x40267. > > > > vm1 | VMM[vm]: Device creation for dma-controller@40244000 > failed. > > > Disabling > > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'pit@40288000'.reg[0] > > > > > > > (0x40288000-0x4028afff). > > > > vm1 | VMM[vm]: Device creation for pit@40288000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'flexcan@402a8000'.reg[0] (0x402a8000-0x402b1fff). > > > > vm1 | VMM[vm]: Device creation for flexcan@402a8000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'flexcan@402b2000'.reg[0] (0x402b2000-0x402bbfff). > > > > vm1 | VMM[vm]: Device creation for flexcan@402b2000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'serial@402bc000'.reg[0] (0x402bc000-0x402befff). > > > > vm1 | VMM[vm]: Device creation for serial@402bc000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'spi@402d0000'.reg[0] > > > > > > > (0x402d0000-0x402d0fff). > > > > vm1 | VMM[vm]: Device creation for spi@402d0000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'i2c@402dc000'.reg[0] > > > > > > > (0x402dc000-0x402dcfff). > > > > vm1 | VMM[vm]: Device creation for i2c@402dc000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'pwm@402e4000'.reg[0] > > > > > > > (0x402e4000-0x402e4fff). > > > > vm1 | VMM[vm]: Device creation for pwm@402e4000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'adc@402e8000'.reg[0] > > > > > > > (0x402e8000-0x402e8fff). > > > > vm1 | VMM[vm]: Device creation for adc@402e8000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'mmc@402f0000'.reg[0] > > > > > > > (0x402f0000-0x402f0fff). > > > > vm1 | VMM[vm]: Device creation for mmc@402f0000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'fccu@4030c000'.reg[0] > > > > > > > (0x4030c000-0x4030efff). > > > > vm1 | VMM[vm]: Device creation for fccu@4030c000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'ethernet@4033c000'.reg[0] (0x4033c000-0x4033dfff). > > > > vm1 | VMM[vm]: Device creation for ethernet@4033c000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'ddr_errata@403c0000'.reg[0] (0x403c0000-0x403c00ff). > > > > vm1 | VMM[vm]: Device creation for ddr_errata@403c0000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for 'ddr- > > > > perf@403e0000'.reg[0] (0x403e0000-0x403e00ff). > > > > vm1 | VMM[vm]: Device creation for ddr-perf@403e0000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'pcie@40400000'.reg[0] > > > > > > > (0x40400000-0x40400fff). > > > > vm1 | VMM[vm]: Device creation for pcie@40400000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'serdes@40480000'.reg[0] (0x40480000-0x40480107). > > > > vm1 | VMM[vm]: Device creation for serdes@40480000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'pcie@44100000'.reg[0] > > > > > > > (0x44100000-0x44100fff). > > > > vm1 | VMM[vm]: Device creation for pcie@44100000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'serdes@44180000'.reg[0] (0x44180000-0x44180107). > > > > vm1 | VMM[vm]: Device creation for serdes@44180000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'pfe@46000000'.reg[0] > > > > > > > (0x46000000-0x46ffffff). > > > > vm1 | VMM[vm]: Device creation for pfe@46000000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'llce_dte_sram@43000000'.reg[0] (0x43000000-0x43001f. > > > > vm1 | VMM[vm]: Device creation for llce_dte_sram@43000000 > failed. > > > Disabling > > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'llce_ppe_rx_sram@43100000'.reg[0] (0x43100000-0x431. > > > > vm1 | VMM[vm]: Device creation for llce_ppe_rx_sram@43100000 > > > failed. > > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'llce_ppe_tx_sram@43200000'.reg[0] (0x43200000-0x432. > > > > vm1 | VMM[vm]: Device creation for llce_ppe_tx_sram@43200000 > > > failed. > > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'llce_frpe_sram@43300000'.reg[0] (0x43300000-0x4330f. > > > > vm1 | VMM[vm]: Device creation for llce_frpe_sram@43300000 > failed. > > > Disabling > > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'llce_shmem@43800000'.reg[0] (0x43800000-0x4384ffff). > > > > vm1 | VMM[vm]: Device creation for llce_shmem@43800000 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'llce@43a00000'.reg[0] > > > > > > > (0x43ff8000-0x43ffbfff). > > > > vm1 | VMM[vm]: Device creation for llce@43a00000 failed. > Disabling > > > device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > > > > 'usbmisc@44064200'.reg[0] (0x44064200-0x440643ff). > > > > vm1 | VMM[vm]: Device creation for usbmisc@44064200 failed. > > > Disabling device. > > > > vm1 | VMM[ioproxy]: No corresponding IO resource for > 'usb@44064000'.reg[0] > > > > > > > (0x44064000-0x440641ff). > > > > vm1 | VMM[vm]: Device creation for usb@44064000 failed. > Disabling > > > device. > > > > vm1 | VMM[ram]: Cleaning caches for device tree [9ff2000-9fff728] > > > ([90df2000]) > > > > io | new iomem region: p=00000000000000 v=00000000400000 > s=400000 > > > (bmb=0x39bc0) > > > > io | map mem: p=00000000002000 v=00000000402000 s=2000 uncached: > > > done(0) > > > > vm1 | VMM[]: Starting Cpu0 @ 0x88e00000 in 64Bit mode (handler @ > > > 1078e08, > > > > stack: 801ffba0, task: 420000, ) > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01) > > > > vm1 | VMM[]: Starting Cpu1 @ 0x896e7254 in 64Bit mode (handler @ > > > 1078e08, > > > > stack: 400f20, task: 420000, mp) > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01) > > > > vm1 | VMM[]: Starting Cpu2 @ 0x896e7254 in 64Bit mode (handler @ > > > 1078e08, > > > > stack: 5fff20, task: 420000, mp) > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01) > > > > vm1 | VMM[]: Starting Cpu3 @ 0x896e7254 in 64Bit mode (handler @ > > > 1078e08, > > > > stack: 7fef20, task: 420000, mp) > > > > vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01) > > > > vm1 | [ 0.000000] Booting Linux on physical CPU 0x0000000000 > > > [0x410fd034] > > > > vm1 | [ 0.000000] Linux version 5.15.119-rt65+ge18f05316cd9 > > > (oe-user@oe- > > > > host) (aarch64-fsl-linux-gcc (3 > > > > vm1 | [ 0.000000] Machine model: NXP S32G2XXX-EVB > > > > vm1 | [ 0.000000] Zone ranges: > > > > vm1 | [ 0.000000] DMA [mem > > > 0x0000000088e00000-0x0000000090dfffff] > > > > vm1 | [ 0.000000] DMA32 empty > > > > vm1 | [ 0.000000] Normal empty > > > > vm1 | [ 0.000000] Movable zone start for each node > > > > vm1 | [ 0.000000] Early memory node ranges > > > > vm1 | [ 0.000000] node 0: [mem > > > 0x0000000088e00000-0x0000000090dfffff] > > > > vm1 | [ 0.000000] Initmem setup node 0 [mem > > > > 0x0000000088e00000-0x0000000090dfffff] > > > > vm1 | [ 0.000000] On node 0, zone DMA: 3584 pages in > unavailable > > > ranges > > > > vm1 | [ 0.000000] On node 0, zone DMA: 29184 pages in > unavailable > > > ranges > > > > vm1 | [ 0.000000] cma: Failed to reserve 256 MiB > > > > vm1 | [ 0.000000] psci: probing for conduit method from DT. > > > > vm1 | [ 0.000000] psci: PSCIv1.0 detected in firmware. > > > > vm1 | [ 0.000000] psci: Using standard PSCI v0.2 function IDs > > > > vm1 | [ 0.000000] psci: Trusted OS migration not required > > > > vm1 | [ 0.000000] psci: SMC Calling Convention v1.0 > > > > vm1 | [ 0.000000] percpu: Embedded 18 pages/cpu s34200 r8192 > > > d31336 u73728 > > > > vm1 | [ 0.000000] pcpu-alloc: s34200 r8192 d31336 u73728 > > > alloc=18*4096 > > > > vm1 | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > > > > vm1 | [ 0.000000] Detected VIPT I-cache on CPU0 > > > > vm1 | [ 0.000000] CPU features: detected: GIC system register > CPU > > > interface > > > > vm1 | [ 0.000000] CPU features: detected: ARM erratum 845719 > > > > vm1 | [ 0.000000] CPU features: detected: ARM errata 1165522, > > > 1319367, > > > > 1530923, or 1530924 > > > > vm1 | [ 0.000000] Built 1 zonelists, mobility grouping on. > Total > > > pages: > > > > 32320 > > > > vm1 | [ 0.000000] Kernel command line: console=ttyAMA0 > > > earlyprintk=1 > > > > rdinit=/init > > > > vm1 | [ 0.000000] Unknown kernel command line parameters > > > "earlyprintk=1", > > > > will be passed to user space. > > > > vm1 | [ 0.000000] Dentry cache hash table entries: 16384 > (order: > > > 5, > > > > 131072 bytes, linear) > > > > vm1 | [ 0.000000] Inode-cache hash table entries: 8192 > (order: 4, > > > 65536 > > > > bytes, linear) > > > > vm1 | [ 0.000000] mem auto-init: stack:off, heap alloc:off, > heap > > > free:off > > > > vm1 | [ 0.000000] Memory: 83660K/131072K available (9088K > kernel > > > code, > > > > 642K rwdata, 3036K rodata, 1344) > > > > vm1 | [ 0.000000] rcu: Preemptible hierarchical RCU > > > implementation. > > > > vm1 | [ 0.000000] rcu: RCU event tracing is enabled. > > > > vm1 | [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 > to > > > nr_cpu_ids=4. > > > > vm1 | [ 0.000000] Trampoline variant of Tasks RCU > enabled. > > > > vm1 | [ 0.000000] Tracing variant of Tasks RCU enabled. > > > > vm1 | [ 0.000000] rcu: RCU calculated value of > > > scheduler-enlistment delay > > > > is 25 jiffies. > > > > vm1 | [ 0.000000] rcu: Adjusting geometry for > rcu_fanout_leaf=16, > > > > nr_cpu_ids=4 > > > > vm1 | [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated > irqs: 0 > > > > vm1 | [ 0.000000] GICv3: 988 SPIs implemented > > > > vm1 | [ 0.000000] GICv3: 0 Extended SPIs implemented > > > > vm1 | [ 0.000000] GICv3: Distributor has no Range Selector > support > > > > vm1 | [ 0.000000] Root IRQ handler: gic_handle_irq > > > > vm1 | [ 0.000000] GICv3: 16 PPIs implemented > > > > vm1 | [ 0.000000] GICv3: CPU0: found redistributor 0 region > > > > 0:0x0000000050880000 > > > > vm1 | [ 0.000000] arch_timer: cp15 timer(s) running at 5.00MHz > > > (virt). > > > > vm1 | [ 0.000000] clocksource: arch_sys_counter: mask: > > > 0xffffffffffffff > > > > max_cycles: 0x127350b88, max_is > > > > vm1 | [ 0.000001] sched_clock: 56 bits at 5MHz, resolution > 200ns, > > > wraps > > > > every 4398046511100ns > > > > vm1 | [ 0.000647] Console: colour dummy device 80x25 > > > > vm1 | [ 0.000694] Calibrating delay loop (skipped), value > > > calculated > > > > using timer frequency.. 10.00 Bog) > > > > vm1 | [ 0.000707] pid_max: default: 32768 minimum: 301 > > > > vm1 | [ 0.000892] Mount-cache hash table entries: 512 (order: > 0, > > > 4096 > > > > bytes, linear) > > > > vm1 | [ 0.000903] Mountpoint-cache hash table entries: 512 > > > (order: 0, > > > > 4096 bytes, linear) > > > > vm1 | [ 0.002655] rcu: Hierarchical SRCU implementation. > > > > vm1 | [ 0.003586] smp: Bringing up secondary CPUs ... > > > > vm1 | [ 0.017942] Detected VIPT I-cache on CPU1 > > > > vm1 | [ 0.018008] GICv3: CPU1: found redistributor 1 region > > > > 0:0x00000000508a0000 > > > > vm1 | [ 0.018171] CPU1: Booted secondary processor > 0x0000000001 > > > [0x410fd034] > > > > vm1 | [ 0.038911] Detected VIPT I-cache on CPU2 > > > > vm1 | [ 0.038970] GICv3: CPU2: found redistributor 100 region > > > > 0:0x00000000508c0000 > > > > vm1 | [ 0.039117] CPU2: Booted secondary processor > 0x0000000100 > > > [0x410fd034] > > > > vm1 | [ 0.059706] Detected VIPT I-cache on CPU3 > > > > vm1 | [ 0.059748] GICv3: CPU3: found redistributor 101 region > > > > 0:0x00000000508e0000 > > > > vm1 | [ 0.059865] CPU3: Booted secondary processor > 0x0000000101 > > > [0x410fd034] > > > > vm1 | [ 0.066499] smp: Brought up 1 node, 4 CPUs > > > > vm1 | [ 0.066508] SMP: Total of 4 processors activated. > > > > vm1 | [ 0.066514] CPU features: detected: 32-bit EL0 Support > > > > vm1 | [ 0.066519] CPU features: detected: CRC32 instructions > > > > vm1 | [ 0.076664] CPU: All CPU(s) started at EL1 > > > > vm1 | [ 0.076717] alternatives: patching kernel code > > > > vm1 | [ 0.077658] devtmpfs: initialized > > > > vm1 | [ 0.086658] clocksource: jiffies: mask: 0xffffffff > > > max_cycles: > > > > 0xffffffff, max_idle_ns: 76450417s > > > > vm1 | [ 0.086684] futex hash table entries: 1024 (order: 4, > 65536 > > > bytes, > > > > linear) > > > > vm1 | [ 0.086894] pinctrl core: initialized pinctrl subsystem > > > > vm1 | [ 0.087761] NET: Registered PF_NETLINK/PF_ROUTE protocol > > > family > > > > vm1 | [ 0.088328] DMA: preallocated 128 KiB GFP_KERNEL pool > for > > > atomic > > > > allocations > > > > vm1 | [ 0.088376] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA > > > pool for > > > > atomic allocations > > > > vm1 | [ 0.088418] DMA: preallocated 128 KiB > GFP_KERNEL|GFP_DMA32 > > > pool for > > > > atomic allocations > > > > vm1 | [ 0.088812] thermal_sys: Registered thermal governor > > > 'step_wise' > > > > vm1 | [ 0.089482] hw-breakpoint: found 6 breakpoint and 4 > > > watchpoint > > > > registers. > > > > vm1 | [ 0.089813] ASID allocator initialised with 65536 > entries > > > > vm1 | [ 0.089902] Serial: AMBA PL011 UART driver > > > > vm1 | [ 0.091205] 12000.pl011_uart: ttyAMA0 at MMIO 0x12000 > (irq > > > = 14, > > > > base_baud = 0) is a PL011 rev3 > > > > vm1 | [ 0.091249] printk: console [ttyAMA0] enabled > > > > vm1 | [ 0.097882] HugeTLB registered 1.00 GiB page size, > > > pre-allocated 0 > > > > pages > > > > vm1 | [ 0.097896] HugeTLB registered 32.0 MiB page size, > > > pre-allocated 0 > > > > pages > > > > vm1 | [ 0.097902] HugeTLB registered 2.00 MiB page size, > > > pre-allocated 0 > > > > pages > > > > vm1 | [ 0.097908] HugeTLB registered 64.0 KiB page size, > > > pre-allocated 0 > > > > pages > > > > vm1 | [ 0.099874] vgaarb: loaded > > > > vm1 | [ 0.100066] SCSI subsystem initialized > > > > vm1 | [ 0.100236] usbcore: registered new interface driver > usbfs > > > > vm1 | [ 0.100269] usbcore: registered new interface driver hub > > > > vm1 | [ 0.100298] usbcore: registered new device driver usb > > > > vm1 | [ 0.100605] pps_core: LinuxPPS API ver. 1 registered > > > > vm1 | [ 0.100609] pps_core: Software ver. 5.3.6 - Copyright > > > 2005-2007 > > > > Rodolfo Giometti <giometti@linux> > > > > vm1 | [ 0.100622] PTP clock support registered > > > > vm1 | [ 0.101759] clocksource: Switched to clocksource > > > arch_sys_counter > > > > vm1 | [ 0.110198] NET: Registered PF_INET protocol family > > > > vm1 | [ 0.110332] IP idents hash table entries: 2048 (order: > 2, > > > 16384 > > > > bytes, linear) > > > > vm1 | [ 0.110706] tcp_listen_portaddr_hash hash table entries: > > > 256 > > > > (order: 0, 4096 bytes, linear) > > > > vm1 | [ 0.110727] Table-perturb hash table entries: 65536 > (order: > > > 6, > > > > 262144 bytes, linear) > > > > vm1 | [ 0.110737] TCP established hash table entries: 1024 > > > (order: 1, > > > > 8192 bytes, linear) > > > > vm1 | [ 0.110752] TCP bind hash table entries: 1024 (order: 2, > > > 16384 > > > > bytes, linear) > > > > vm1 | [ 0.110775] TCP: Hash tables configured (established > 1024 > > > bind 1024) > > > > vm1 | [ 0.110860] UDP hash table entries: 256 (order: 1, 8192 > > > bytes, linear) > > > > vm1 | [ 0.110882] UDP-Lite hash table entries: 256 (order: 1, > > > 8192 bytes, > > > > linear) > > > > vm1 | [ 0.111044] NET: Registered PF_UNIX/PF_LOCAL protocol > family > > > > vm1 | [ 0.111710] RPC: Registered named UNIX socket transport > > > module. > > > > vm1 | [ 0.111715] RPC: Registered udp transport module. > > > > vm1 | [ 0.111718] RPC: Registered tcp transport module. > > > > vm1 | [ 0.111721] RPC: Registered tcp NFSv4.1 backchannel > > > transport module. > > > > vm1 | [ 0.111731] PCI: CLS 0 bytes, default 64 > > > > vm1 | [ 0.112053] Unpacking initramfs... > > > > vm1 | [ 0.946302] Initramfs unpacking failed: write error > > > > vm1 | [ 0.959998] Freeing initrd memory: 25676K > > > > vm1 | [ 0.962699] workingset: timestamp_bits=62 max_order=15 > > > bucket_order=0 > > > > vm1 | [ 0.963739] fuse: init (API version 7.34) > > > > vm1 | [ 0.963938] NET: Registered PF_ALG protocol family > > > > vm1 | [ 0.964001] Block layer SCSI generic (bsg) driver > version > > > 0.4 > > > > loaded (major 248) > > > > vm1 | [ 0.964008] io scheduler mq-deadline registered > > > > vm1 | [ 0.964012] io scheduler kyber registered > > > > vm1 | [ 0.968974] vcan: Virtual CAN interface driver > > > > vm1 | [ 0.968989] slcan: serial line CAN interface driver > > > > vm1 | [ 0.968992] slcan: 10 dynamic interface channels. > > > > vm1 | [ 0.969000] CAN device driver interface > > > > vm1 | [ 0.969065] e100: Intel(R) PRO/100 Network Driver > > > > vm1 | [ 0.969069] e100: Copyright(c) 1999-2006 Intel > Corporation > > > > vm1 | [ 0.969104] e1000: Intel(R) PRO/1000 Network Driver > > > > vm1 | [ 0.969108] e1000: Copyright (c) 1999-2006 Intel > > > Corporation. > > > > vm1 | [ 0.969144] e1000e: Intel(R) PRO/1000 Network Driver > > > > vm1 | [ 0.969146] e1000e: Copyright(c) 1999 - 2015 Intel > > > Corporation. > > > > vm1 | [ 0.969179] igb: Intel(R) Gigabit Ethernet Network > Driver > > > > vm1 | [ 0.969183] igb: Copyright (c) 2007-2014 Intel > Corporation. > > > > vm1 | [ 0.969534] ehci_hcd: USB 2.0 'Enhanced' Host Controller > > > (EHCI) Driver > > > > vm1 | [ 0.969543] ehci-pci: EHCI PCI platform driver > > > > vm1 | [ 0.969763] usbcore: registered new interface driver uas > > > > vm1 | [ 0.969801] usbcore: registered new interface driver > > > usb-storage > > > > vm1 | [ 0.970286] i2c_dev: i2c /dev entries driver > > > > vm1 | [ 0.970482] sdhci: Secure Digital Host Controller > Interface > > > driver > > > > vm1 | [ 0.970485] sdhci: Copyright(c) Pierre Ossman > > > > vm1 | [ 0.970488] sdhci-pltfm: SDHCI platform and OF driver > helper > > > > vm1 | [ 0.970671] usbcore: registered new interface driver > usbhid > > > > vm1 | [ 0.970675] usbhid: USB HID core driver > > > > vm1 | [ 0.971182] NET: Registered PF_INET6 protocol family > > > > vm1 | [ 0.972106] Segment Routing with IPv6 > > > > vm1 | [ 0.972143] In-situ OAM (IOAM) with IPv6 > > > > vm1 | [ 0.972197] sit: IPv6, IPv4 and MPLS over IPv4 tunneling > > > driver > > > > vm1 | [ 0.972682] NET: Registered PF_PACKET protocol family > > > > vm1 | [ 0.972887] can: controller area network core > > > > vm1 | [ 0.972921] NET: Registered PF_CAN protocol family > > > > vm1 | [ 0.972926] can: raw protocol > > > > vm1 | [ 0.972932] can: broadcast manager protocol > > > > vm1 | [ 0.972944] can: netlink gateway - max_hops=1 > > > > vm1 | [ 0.972973] 8021q: 802.1Q VLAN Support v1.8 > > > > vm1 | [ 0.973246] printk: console [ttyAMA0]: printing thread > > > started > > > > vm1 | [ 1.043530] uart-pl011 12000.pl011_uart: no DMA platform > > > data > > > > vm1 | [ 1.099243] VFS: Cannot open root device "(null)" or > > > unknown- > > > > block(0,0): error -6 > > > > vm1 | [ 1.099253] Please append a correct "root=" boot option; > > > here are > > > > the available partitions: > > > > vm1 | [ 1.099259] Kernel panic - not syncing: > > > > > > > > Regards, > > > > Qiang > > > > > > > > On Wed, Feb 19, 2025 at 5:17 PM Adam Lackorzynski <[email protected] > > > > <mailto:[email protected]>> wrote: > > > > > > > > Hi Qiang, > > > > > > > > what you did is good. > > > > > > > > The messages shown are giving hints on the setup and are not > > > generally > > > > bad. > > > > If the ioproxy says there's no resource it means that a > > > device/resource > > > > is listed in the device tree but not on the vbus, i.e. this > resource > > > is > > > > not available for the VM. uvmm thus disables this node in the > device > > > > tree. > > > > The platform_ctl cap message is coming from io, telling us that > io > > > > cannot offer the Platform_control API because no cap has been > made > > > > available. > > > > > > > > Regarding the UART, there's also a hint, and I believe that is > also > > > the > > > > reason why no output from Linux is seen. You already noticed as > well. > > > > pl011 and linflex are not compatible. What I would propose is > that > > > you > > > > add a node in the DT for the pl011, as uvmm can emulate this UART > > > type. > > > > An example can be found in > pkg/uvmm/configs/dts/vmm-devices-arm.dtsi. > > > > This file contains two variants of a UART. The pl011 one which I > just > > > > mentioned and a virtio-console one. Both will work. You can take > the > > > > contents of this file as is, however pay attention to the MMIO > ranges > > > > and IRQs used. Choose a free range in the guest physical address > > > space > > > > of your guest (aka a range not used in the device tree) and > change > > > the > > > > addresses accordingly. Similar with the interrupts, use one not > used > > > > previously. > > > > > > > > > > > > > > > > Adam > > > > > > > > On Tue Feb 18, 2025 at 18:02:32 +0800, qiang xu wrote: > > > > > Hi Adam, > > > > > > > > > > Thank you very much for your help. I selected the option > "*Target > > > > > configuration -> Use PSCI[]**" *in the Fiasco compile options > and > > > > > recompiled. Then, in the L4 compile options, I selected *"uvmm > > > virtual > > > > > machine monitor -> PSCI interface support[]*" and recompiled > L4. > > > After > > > > > running it in boot, I encountered the overlap issue again. > Later, > > > I > > > > > adjusted the `DEFAULT_RELOC_arm64`and resolved it. However, > when > > > I started, > > _______________________________________________ l4-hackers mailing list -- [email protected] To unsubscribe send an email to [email protected]
start.log
(text/x-log, 98.7 KB)
## Booting kernel from Legacy Image at 8000e000 ...
Image Name: L4 Image #34
Image Type: AArch64 Linux Kernel Image (uncompressed)
Data Size: 46235791 Bytes = 44.1 MiB
Load Address: 91000000
Entry Point: 91000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 80000000
Booting using the fdt blob at 0x80000000
Loading Kernel Image
Using Device Tree in place at 0000000080000000, end 0000000080010384
fixup: pfe0 set to 00:01:be:be:ef:11
fixup: pfe1 set to 00:01:be:be:ef:22
fixup: pfe2 set to 00:01:be:be:ef:33
Starting kernel ...
L4 Bootstrapper
Build: #34 Mon Feb 24 15:00:08 CST 2025, 11.4.0
RAM: 0000000080000000 - 00000000ffffffff: 2097152kB
RAM: 0000000880000000 - 00000008dfffffff: 1572864kB
Total RAM: 3584MB
Scanning fiasco
Scanning sigma0
Scanning moe
Moving up to 15 modules behind 81300000
moving module 00 { 9101f000-910e5fe7 } -> { 8600a000-860d0fe7 } [815080]
moving module 01 { 910e6000-910ebcd7 } -> { 860d1000-860d6cd7 } [23768]
moving module 02 { 910ec000-9111e6cf } -> { 860d7000-861096cf } [206544]
moving module 03 { 9111f000-9121258f } -> { 8610a000-861fd58f } [996752]
moving module 04 { 91213000-9122e537 } -> { 861fe000-86219537 } [111928]
moving module 05 { 9122f000-912b7aa7 } -> { 8621a000-862a2aa7 } [559784]
moving module 06 { 912b8000-912c5384 } -> { 862a3000-862b0384 } [54149]
moving module 07 { 912c6000-92bd9a52 } -> { 862b1000-87bc4a52 } [26294867]
moving module 08 { 92bda000-92bdb218 } -> { 87bc5000-87bc6218 } [4633]
moving module 09 { 92bdc000-92bdc2be } -> { 87bc7000-87bc72be } [703]
moving module 10 { 92bdd000-939bd807 } -> { 87bc8000-889a8807 } [14551048]
moving module 11 { 939be000-93a03faf } -> { 889a9000-889eefaf } [286640]
moving module 12 { 93a04000-93c16a87 } -> { 889ef000-88c01a87 } [2173576]
moving module 13 { 93c17000-93c171f7 } -> { 88c02000-88c021f7 } [504]
moving module 14 { 93c18000-93c1808e } -> { 88c03000-88c0308e } [143]
Loading fiasco
found node 0 kernel info page (via ELF) at 0x80203000
Loading sigma0
Loading moe
found node 0 kernel options (via ELF) at 0x80204000
Sigma0 config node: 0 ip:860003f4
Roottask config node: 0 ip:80841904
Regions of list 'regions'
[ 34000000, 3407ffff] { 80000} Arch pfebufs@34000000
[ 34080000, 3409ffff] { 20000} Arch pfebufs@34080000
[ 80000000, 8000dfff] { e000} Root dtb
[ 8000e000, 8000efff] { 1000} Root mbi_rt
[ 80201000, 80205847] { 4848} Kern fiasco
[ 80400000, 8061dfff] { 21e000} Kern fiasco
[ 80840000, 8087d817] { 3d818} Root moe
[ 83200000, 835dffff] { 3e0000} Arch pfebufs@83200000
[ 835e0000, 835fffff] { 20000} Arch pfebufs@835e0000
[ 84000000, 843fffff] { 400000} Arch shm@84000000
[ 85000000, 85000fff] { 1000} Arch ddr@85000000
[ 86000000, 8600946f] { 9470} Sigma0 sigma0
[ 8610a000, 88c0308e] { 2af908f} Root Module
[ 91000158, 91000187] { 30} Root cpu_boot
[ 9101e1d0, 9101ecdc] { b0d} Boot modinfo
[ c0000000, c03fffff] { 400000} Arch shm@c0000000
[ c0400000, c07fffff] { 400000} Arch shm@c0400000
[ d0000000, d000007f] { 80} Arch shm@d0000000
[ d0000080, d00000ff] { 80} Arch shm@d0000080
[ ff800000, ff9fffff] { 200000} Arch atf@ff800000
Starting kernel fiasco at 80201190
Hello from Startup::stage2
Reserved 216 MiB as kernel memory.
Number of IRQs available at this GIC: 576
CPU0: GIC Redistributor at ffff00480000 for 0x0
Detecting PSCI ...
Detected PSCI v1.1
PSCI: CPU_SUSPEND format original v0.2, does not support OS-initiated mode
PSCI: TOS: Not present or not required.
FPU: Initialize
ARM generic timer: freq=5000000 interval=5000 cnt=443516694
SERIAL ESC: allocated IRQ 114 for serial uart
Not using serial hack in slow timer handler.
Welcome to the L4Re Microkernel!
L4Re Microkernel on arm-64
Rev: unknown compiled with gcc 11.4.0 for NXP S32G []
Build: #12 Tue Feb 18 14:17:13 CST 2025
Cache config: ON
CPU1: GIC Redistributor at ffff004a0000 for 0x1
CPU1: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000
ID_MMFR[04]: 00001122 00000000 00000000 00000000
CPU2: GIC Redistributor at ffff004c0000 for 0x100
CPU2: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000
ID_MMFR[04]: 00001122 00000000 00000000 00000000
CPU3: GIC Redistributor at ffff004e0000 for 0x101
Calibrating timer loop...
CPU3: ID_PFR[01]: 01002222 00000000 ID_[DA]FR0: 10305106 00000000
ID_MMFR[04]: 00001122 00000000 00000000 00000000
Timer calibration done.
MDB: use page size: 30
MDB: use page size: 21
MDB: use page size: 12
SIGMA0: Hello!
KIP @ 80203000
allocated 4KB for maintenance structures
SIGMA0: Dump of all resource maps
RAM:------------------------
[4:---:80000000;8000dfff]
[4:RWX:8000e000;8000efff]
[0:RWX:8000f000;80200fff]
[0:RWX:80206000;803fffff]
[0:RWX:8061e000;8083ffff]
[4:RWX:80840000;8087dfff]
[0:RWX:8087e000;831fffff]
[0:RWX:83600000;83ffffff]
[0:RWX:84400000;84ffffff]
[0:RWX:85001000;85ffffff]
[0:RWX:8600a000;86109fff]
[4:RWX:8610a000;88c03fff]
[0:RWX:88c04000;90ffffff]
[4:---:91000000;91000fff]
[0:RWX:91001000;bfffffff]
[0:RWX:c0800000;cfffffff]
[0:RWX:d0001000;ff7fffff]
[0:RWX:ffa00000;ffffffff]
[0:RWX:880000000;8d27fffff]
IOMEM:----------------------
[0:RW-:0;7fffffff]
[0:RW-:83200000;835fffff]
[0:RW-:84000000;843fffff]
[0:RW-:85000000;85000fff]
[0:RW-:c0000000;c07fffff]
[0:RW-:d0000000;d0000fff]
[0:RW-:ff800000;ff9fffff]
[0:RW-:100000000;87fffffff]
[0:RW-:8e0000000;ffffffffffffffff]
MOE: Hello world
MOE: found 3383848 KByte free memory
MOE: found RAM from 8000f000 to 8d2800000
MOE: allocated 34088 KByte for the page array @0x8087e000
MOE: virtual user address space [0-ffffffffff]
MOE: cmdline: moe rom/uvmm-io.ned
MOE: rom name space cap -> [C:103000]
MOE: rwfs name space cap -> [C:105000]
ROMFS: [8610a000-861fd590] [C:107000] uvmm
ROMFS: [861fe000-86219538] [C:109000] l4re
ROMFS: [8621a000-862a2aa8] [C:10b000] ned
ROMFS: [862a3000-862b0385] [C:10d000] s32g2xxa-evb.dtb1
ROMFS: [862b1000-87bc4a53] [C:10f000] fsl-image-dom0less-s32g274aevb.cpio.gz
ROMFS: [87bc5000-87bc6219] [C:111000] vmm.lua
ROMFS: [87bc7000-87bc72bf] [C:113000] uvmm-io.ned
ROMFS: [87bc8000-889a8808] [C:115000] Image
ROMFS: [889a9000-889eefb0] [C:117000] cons
ROMFS: [889ef000-88c01a88] [C:119000] io
ROMFS: [88c02000-88c021f8] [C:11b000] io.cfg
ROMFS: [88c03000-88c0308f] [C:11d000] vm_hw.vbus
ROMFS: [80000000-8000e000] [C:11f000] .fdt
MOE: Starting: rom/ned rom/uvmm-io.ned
MOE: loading 'rom/ned'
Ned says: Hi World!
Ned: loading file: 'rom/uvmm-io.ned'
Console Server
cons>
Created vcon channel: io [420010]
cons>
io | Io service
io | Verboseness level: 7
io | unused physical memory space:
Created vcon channel: vm1 [421010]
cons>
io | [00000000000000-00000033ffffff]
Created vcon channel: mon1 [422010]
cons>
io | [000000340a0000-0000007fffffff]
io | [00000100000000-0000087fffffff]
io | [000008e0000000-ffffffffffffffff]
io | no 'iommu' capability found, using CPU-phys for DMA
io | Loading: config 'rom/io.cfg'
io | Loading: config 'rom/vm_hw.vbus'
io | Add IRQ resources to vbus: IRQ [00000000000007-00000000000007 1] level high (align=0 flags=300001)
io | Add IRQ resources to vbus: IRQ [00000000000079-00000000000079 1] raising edge (align=0 flags=100001)
io | vm_hw: [N12_GLOBAL__N_112Virtual_sbusE]
io | Resources: ==== start ====
io | Resources: ===== end =====
io | L4ICU: [N2Vi6Sw_icuE]
io | Resources: ==== start ====
io | Resources: ===== end =====
io | PMU: [N2Vi9Proxy_devE]
io | Resources: ==== start ====
io | IRQ [00000000000007-00000000000007 1] level high (align=0 flags=300001)
io | Resources: ===== end =====
io | UART0: [N2Vi9Proxy_devE]
io | Resources: ==== start ====
io | IRQ [00000000000079-00000000000079 1] raising edge (align=0 flags=100001)
io | IOMEM [00000000002000-00000000003000 1001] 32-bit non-pref (align=1000 flags=300002)
io | Resources: ===== end =====
io | Real Hardware -----------------------------------
io | System Bus:
io | Resources: ==== start ====
io | DMADOM [00000000000000-00000000000000 1] (align=0 flags=6)
io | Resources: ===== end =====
io | pmu:
io | compatible= { "arm,armv8-pmuv3" }
io | Clients: ===== start ====
io | PMU: [N2Vi9Proxy_devE]
io | Clients: ===== end ====
io | Resources: ==== start ====
io | IRQ [00000000000007-00000000000007 1] level high (align=0 flags=300001)
io | Resources: ===== end =====
io | uart0:
io | compatible= { "arm,pl011" }
io | Clients: ===== start ====
io | UART0: [N2Vi9Proxy_devE]
io | Clients: ===== end ====
io | Resources: ==== start ====
io | IRQ [00000000000079-00000000000079 1] raising edge (align=0 flags=100001)
io | IOMEM [00000000002000-00000000003000 1001] 32-bit non-pref (align=1000 flags=300002)
io | Resources: ===== end =====
io | warning: could not register control interface at cap 'platform_ctl'
io | Ready. Waiting for request.
io | vbus vm_hw does not support a global DMA domain
vm1 | VMM[main]: Hello out there.
vm1 | VMM[ram]: No memory nodes found, setting up default region
vm1 | Command line: console=ttyAMA0 rdinit=/bin/sh debug ignore_loglevel loglevel=8 initcall_debug
vm1 | VMM[]: [email protected],virtiocap: capability net is invalid.
vm1 | VMM[vm]: Device creation for virtual device virtio_net@10000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pmu' IRQ 23.
vm1 | VMM[vm]: Device creation for pmu failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@c0000000'.reg[0] (0xc0000000-0xc03fffff).
vm1 | VMM[vm]: Device creation for shm@c0000000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@c0400000'.reg[0] (0xc0400000-0xc07fffff).
vm1 | VMM[vm]: Device creation for shm@c0400000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@d0000000'.reg[0] (0xd0000000-0xd000007f).
vm1 | VMM[vm]: Device creation for shm@d0000000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@d0000080'.reg[0] (0xd0000080-0xd00000ff).
vm1 | VMM[vm]: Device creation for shm@d0000080 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'shm@84000000'.reg[0] (0x84000000-0x843fffff).
vm1 | VMM[vm]: Device creation for shm@84000000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pfebufs@34000000'.reg[0] (0x34000000-0x3407ffff).
vm1 | VMM[vm]: Device creation for pfebufs@34000000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pfebufs@34080000'.reg[0] (0x34080000-0x3409ffff).
vm1 | VMM[vm]: Device creation for pfebufs@34080000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pfebufs@83200000'.reg[0] (0x83200000-0x835dffff).
vm1 | VMM[vm]: Device creation for pfebufs@83200000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pfebufs@835e0000'.reg[0] (0x835e0000-0x835fffff).
vm1 | VMM[vm]: Device creation for pfebufs@835e0000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'ddr@85000000'.reg[0] (0x85000000-0x85000fff).
vm1 | VMM[vm]: Device creation for ddr@85000000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'scmi' IRQ 332.
vm1 | VMM[vm]: Device creation for scmi failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'rtc@40060000'.reg[0] (0x40060000-0x40060fff).
vm1 | VMM[vm]: Device creation for rtc@40060000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'syscon@4007c000'.reg[0] (0x4007c000-0x4007c0ff).
vm1 | VMM[vm]: Device creation for syscon@4007c000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'ddr_gpr@4007c600'.reg[0] (0x4007c600-0x4007c61f).
vm1 | VMM[vm]: Device creation for ddr_gpr@4007c600 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'nvram@4009c000'.reg[0] (0x4009c000-0x4009c00f).
vm1 | VMM[vm]: Device creation for nvram@4009c000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'siul2-pinctrl@4009c240'.reg[0] (0x4009c240-0x4009c3d7).
vm1 | VMM[vm]: Device creation for siul2-pinctrl@4009c240 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'siul2-gpio@4009d700'.reg[0] (0x4009d700-0x4009d70f).
vm1 | VMM[vm]: Device creation for siul2-gpio@4009d700 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'nvram@44010000'.reg[0] (0x44010000-0x4401000f).
vm1 | VMM[vm]: Device creation for nvram@44010000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'ocotp@400a4000'.reg[0] (0x400a4000-0x400a43ff).
vm1 | VMM[vm]: Device creation for ocotp@400a4000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'tmu@400a8000'.reg[0] (0x400a8000-0x400aafff).
vm1 | VMM[vm]: Device creation for tmu@400a8000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'watchdog@4010c000'.reg[0] (0x4010c000-0x4010cfff).
vm1 | VMM[vm]: Device creation for watchdog@4010c000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'stm@4011c000'.reg[0] (0x4011c000-0x4011efff).
vm1 | VMM[vm]: Device creation for stm@4011c000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'stm@40120000'.reg[0] (0x40120000-0x40122fff).
vm1 | VMM[vm]: Device creation for stm@40120000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'spi@40134000'.reg[0] (0x0-0x1fffffff).
vm1 | VMM[vm]: Device creation for spi@40134000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'dma-controller@40144000'.reg[0] (0x40144000-0x40167fff).
vm1 | VMM[vm]: Device creation for dma-controller@40144000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pit@40188000'.reg[0] (0x40188000-0x4018afff).
vm1 | VMM[vm]: Device creation for pit@40188000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'mscm@40198000'.reg[0] (0x40198000-0x40198fff).
vm1 | VMM[vm]: Device creation for mscm@40198000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'flexcan@401b4000'.reg[0] (0x401b4000-0x401bdfff).
vm1 | VMM[vm]: Device creation for flexcan@401b4000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'serial@401c8000'.reg[0] (0x401c8000-0x401cafff).
vm1 | VMM[vm]: Device creation for serial@401c8000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'serial@401cc000'.reg[0] (0x401cc000-0x401cefff).
vm1 | VMM[vm]: Device creation for serial@401cc000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'spi@401d8000'.reg[0] (0x401d8000-0x401d8fff).
vm1 | VMM[vm]: Device creation for spi@401d8000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'i2c@401e4000'.reg[0] (0x401e4000-0x401e4fff).
vm1 | VMM[vm]: Device creation for i2c@401e4000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'i2c@401e8000'.reg[0] (0x401e8000-0x401e8fff).
vm1 | VMM[vm]: Device creation for i2c@401e8000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'i2c@401ec000'.reg[0] (0x401ec000-0x401ecfff).
vm1 | VMM[vm]: Device creation for i2c@401ec000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pwm@401f4000'.reg[0] (0x401f4000-0x401f4fff).
vm1 | VMM[vm]: Device creation for pwm@401f4000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'adc@401f8000'.reg[0] (0x401f8000-0x401f8fff).
vm1 | VMM[vm]: Device creation for adc@401f8000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'watchdog@40200000'.reg[0] (0x40200000-0x40200fff).
vm1 | VMM[vm]: Device creation for watchdog@40200000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'watchdog@40204000'.reg[0] (0x40204000-0x40204fff).
vm1 | VMM[vm]: Device creation for watchdog@40204000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'watchdog@40208000'.reg[0] (0x40208000-0x40208fff).
vm1 | VMM[vm]: Device creation for watchdog@40208000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'mu0b@40210000'.reg[0] (0x40210000-0x40210fff).
vm1 | VMM[vm]: Device creation for mu0b@40210000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'mu1b@40211000'.reg[0] (0x40211000-0x40211fff).
vm1 | VMM[vm]: Device creation for mu1b@40211000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'mu2b@40212000'.reg[0] (0x40212000-0x40212fff).
vm1 | VMM[vm]: Device creation for mu2b@40212000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'mu3b@40213000'.reg[0] (0x40213000-0x40213fff).
vm1 | VMM[vm]: Device creation for mu3b@40213000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'stm@40228000'.reg[0] (0x40228000-0x4022afff).
vm1 | VMM[vm]: Device creation for stm@40228000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'dma-controller@40244000'.reg[0] (0x40244000-0x40267fff).
vm1 | VMM[vm]: Device creation for dma-controller@40244000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pit@40288000'.reg[0] (0x40288000-0x4028afff).
vm1 | VMM[vm]: Device creation for pit@40288000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'flexcan@402a8000'.reg[0] (0x402a8000-0x402b1fff).
vm1 | VMM[vm]: Device creation for flexcan@402a8000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'flexcan@402b2000'.reg[0] (0x402b2000-0x402bbfff).
vm1 | VMM[vm]: Device creation for flexcan@402b2000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'serial@402bc000'.reg[0] (0x402bc000-0x402befff).
vm1 | VMM[vm]: Device creation for serial@402bc000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'spi@402d0000'.reg[0] (0x402d0000-0x402d0fff).
vm1 | VMM[vm]: Device creation for spi@402d0000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'i2c@402dc000'.reg[0] (0x402dc000-0x402dcfff).
vm1 | VMM[vm]: Device creation for i2c@402dc000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pwm@402e4000'.reg[0] (0x402e4000-0x402e4fff).
vm1 | VMM[vm]: Device creation for pwm@402e4000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'adc@402e8000'.reg[0] (0x402e8000-0x402e8fff).
vm1 | VMM[vm]: Device creation for adc@402e8000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'mmc@402f0000'.reg[0] (0x402f0000-0x402f0fff).
vm1 | VMM[vm]: Device creation for mmc@402f0000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'fccu@4030c000'.reg[0] (0x4030c000-0x4030efff).
vm1 | VMM[vm]: Device creation for fccu@4030c000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'ethernet@4033c000'.reg[0] (0x4033c000-0x4033dfff).
vm1 | VMM[vm]: Device creation for ethernet@4033c000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'ddr_errata@403c0000'.reg[0] (0x403c0000-0x403c00ff).
vm1 | VMM[vm]: Device creation for ddr_errata@403c0000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'ddr-perf@403e0000'.reg[0] (0x403e0000-0x403e00ff).
vm1 | VMM[vm]: Device creation for ddr-perf@403e0000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pcie@40400000'.reg[0] (0x40400000-0x40400fff).
vm1 | VMM[vm]: Device creation for pcie@40400000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'serdes@40480000'.reg[0] (0x40480000-0x40480107).
vm1 | VMM[vm]: Device creation for serdes@40480000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pcie@44100000'.reg[0] (0x44100000-0x44100fff).
vm1 | VMM[vm]: Device creation for pcie@44100000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'serdes@44180000'.reg[0] (0x44180000-0x44180107).
vm1 | VMM[vm]: Device creation for serdes@44180000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'pfe@46000000'.reg[0] (0x46000000-0x46ffffff).
vm1 | VMM[vm]: Device creation for pfe@46000000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'llce_dte_sram@43000000'.reg[0] (0x43000000-0x43001fff).
vm1 | VMM[vm]: Device creation for llce_dte_sram@43000000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'llce_ppe_rx_sram@43100000'.reg[0] (0x43100000-0x43107fff).
vm1 | VMM[vm]: Device creation for llce_ppe_rx_sram@43100000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'llce_ppe_tx_sram@43200000'.reg[0] (0x43200000-0x43207fff).
vm1 | VMM[vm]: Device creation for llce_ppe_tx_sram@43200000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'llce_frpe_sram@43300000'.reg[0] (0x43300000-0x4330ffff).
vm1 | VMM[vm]: Device creation for llce_frpe_sram@43300000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'llce_shmem@43800000'.reg[0] (0x43800000-0x4384ffff).
vm1 | VMM[vm]: Device creation for llce_shmem@43800000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'llce@43a00000'.reg[0] (0x43ff8000-0x43ffbfff).
vm1 | VMM[vm]: Device creation for llce@43a00000 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'usbmisc@44064200'.reg[0] (0x44064200-0x440643ff).
vm1 | VMM[vm]: Device creation for usbmisc@44064200 failed. Disabling device.
vm1 | VMM[ioproxy]: No corresponding IO resource for 'usb@44064000'.reg[0] (0x44064000-0x440641ff).
vm1 | VMM[vm]: Device creation for usb@44064000 failed. Disabling device.
vm1 | VMM[ram]: Cleaning caches for device tree [21ff2000-21fff74c] ([b11f2000])
io | new iomem region: p=00000000000000 v=00000000400000 s=400000 (bmb=0x39bc0)
io | map mem: p=00000000002000 v=00000000402000 s=2000 uncached: done(0)
vm1 | VMM[]: Starting Cpu0 @ 0x91200000 in 64Bit mode (handler @ 1078e08, stack: 801ffba0, task: 420000, mpidr: 80000000 (orig: 80000000)
vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
vm1 | VMM[]: Starting Cpu1 @ 0x91ae7254 in 64Bit mode (handler @ 1078e08, stack: 400f20, task: 420000, mpidr: 80000001 (orig: 80000000)
vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
vm1 | VMM[]: Starting Cpu2 @ 0x91ae7254 in 64Bit mode (handler @ 1078e08, stack: 5fff20, task: 420000, mpidr: 80000100 (orig: 80000000)
vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
vm1 | VMM[]: Starting Cpu3 @ 0x91ae7254 in 64Bit mode (handler @ 1078e08, stack: 7fef20, task: 420000, mpidr: 80000101 (orig: 80000000)
vm1 | ffffffc0080202c4: mrs r0, S3_1_C11_C0_2 (hsr=62346c01)
vm1 | ** 28 printk messages dropped **
vm1 | [ 0.000000] Kernel command line: console=ttyAMA0 rdinit=/bin/sh debug ignore_loglevel loglevel=8 initcall_debug
vm1 | ** 14 printk messages dropped **
vm1 | [ 0.000000] GICv3: Distributor has no Range Selector support
vm1 | [ 0.000000] Root IRQ handler: gic_handle_irq
vm1 | [ 0.000000] GICv3: 16 PPIs implemented
vm1 | ** 48 printk messages dropped **
vm1 | [ 0.039272] Detected VIPT I-cache on CPU2
vm1 | [ 0.039331] GICv3: CPU2: found redistributor 100 region 0:0x00000000508c0000
vm1 | [ 0.039472] CPU2: Booted secondary processor 0x0000000100 [0x410fd034]
vm1 | [ 0.060042] Detected VIPT I-cache on CPU3
vm1 | [ 0.060084] GICv3: CPU3: found redistributor 101 region 0:0x00000000508e0000
vm1 | [ 0.060201] CPU3: Booted secondary processor 0x0000000101 [0x410fd034]
vm1 | [ 0.066833] smp: Brought up 1 node, 4 CPUs
vm1 | [ 0.066843] SMP: Total of 4 processors activated.
vm1 | [ 0.066848] CPU features: detected: 32-bit EL0 Support
vm1 | [ 0.066853] CPU features: detected: CRC32 instructions
vm1 | [ 0.076987] CPU: All CPU(s) started at EL1
vm1 | [ 0.077041] alternatives: patching kernel code
vm1 | [ 0.078081] devtmpfs: initialized
vm1 | [ 0.086437] calling bpf_jit_charge_init+0x0/0x4c @ 1
vm1 | [ 0.086472] initcall bpf_jit_charge_init+0x0/0x4c returned 0 after 0 usecs
vm1 | [ 0.086485] calling ipc_ns_init+0x0/0x44 @ 1
vm1 | [ 0.086526] initcall ipc_ns_init+0x0/0x44 returned 0 after 0 usecs
vm1 | [ 0.086539] calling init_mmap_min_addr+0x0/0x20 @ 1
vm1 | [ 0.086550] initcall init_mmap_min_addr+0x0/0x20 returned 0 after 0 usecs
vm1 | [ 0.086562] calling pci_realloc_setup_params+0x0/0x54 @ 1
vm1 | [ 0.086571] initcall pci_realloc_setup_params+0x0/0x54 returned 0 after 0 usecs
vm1 | [ 0.086581] calling inet_frag_wq_init+0x0/0x54 @ 1
vm1 | [ 0.086921] initcall inet_frag_wq_init+0x0/0x54 returned 0 after 0 usecs
vm1 | [ 0.086964] calling fpsimd_init+0x0/0xd0 @ 1
vm1 | [ 0.086982] initcall fpsimd_init+0x0/0xd0 returned 0 after 0 usecs
vm1 | [ 0.086994] calling tagged_addr_init+0x0/0x38 @ 1
vm1 | [ 0.087016] initcall tagged_addr_init+0x0/0x38 returned 0 after 0 usecs
vm1 | [ 0.087027] calling enable_mrs_emulation+0x0/0x28 @ 1
vm1 | [ 0.087040] initcall enable_mrs_emulation+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.087052] calling init_amu_fie+0x0/0x10 @ 1
vm1 | [ 0.087064] initcall init_amu_fie+0x0/0x10 returned 0 after 0 usecs
vm1 | [ 0.087075] calling map_entry_trampoline+0x0/0x10c @ 1
vm1 | [ 0.087102] initcall map_entry_trampoline+0x0/0x10c returned 0 after 0 usecs
vm1 | [ 0.087115] calling alloc_frozen_cpus+0x0/0x10 @ 1
vm1 | [ 0.087124] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs
vm1 | [ 0.087133] calling cpu_hotplug_pm_sync_init+0x0/0x2c @ 1
vm1 | [ 0.087143] initcall cpu_hotplug_pm_sync_init+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 0.087156] calling wq_sysfs_init+0x0/0x48 @ 1
vm1 | [ 0.087221] initcall wq_sysfs_init+0x0/0x48 returned 0 after 0 usecs
vm1 | [ 0.087232] calling ksysfs_init+0x0/0xb8 @ 1
vm1 | [ 0.087256] initcall ksysfs_init+0x0/0xb8 returned 0 after 0 usecs
vm1 | [ 0.087267] calling pm_init+0x0/0x88 @ 1
vm1 | [ 0.087336] initcall pm_init+0x0/0x88 returned 0 after 0 usecs
vm1 | [ 0.087345] calling rcu_set_runtime_mode+0x0/0x2c @ 1
vm1 | [ 0.087358] initcall rcu_set_runtime_mode+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 0.087368] calling init_jiffies_clocksource+0x0/0x2c @ 1
vm1 | [ 0.087382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
vm1 | [ 0.087392] initcall init_jiffies_clocksource+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 0.087404] calling futex_init+0x0/0x108 @ 1
vm1 | [ 0.087422] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
vm1 | [ 0.087491] initcall futex_init+0x0/0x108 returned 0 after 0 usecs
vm1 | [ 0.087500] calling cgroup_wq_init+0x0/0x40 @ 1
vm1 | [ 0.087519] initcall cgroup_wq_init+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.087529] calling cgroup1_wq_init+0x0/0x40 @ 1
vm1 | [ 0.087545] initcall cgroup1_wq_init+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.087558] calling cpu_pm_init+0x0/0x30 @ 1
vm1 | [ 0.087572] initcall cpu_pm_init+0x0/0x30 returned 0 after 0 usecs
vm1 | [ 0.087582] calling cma_init_reserved_areas+0x0/0x22c @ 1
vm1 | [ 0.095749] initcall cma_init_reserved_areas+0x0/0x22c returned 0 after 0 usecs
vm1 | [ 0.095777] calling fsnotify_init+0x0/0x60 @ 1
vm1 | [ 0.095863] initcall fsnotify_init+0x0/0x60 returned 0 after 0 usecs
vm1 | [ 0.095881] calling filelock_init+0x0/0xd4 @ 1
vm1 | [ 0.095932] initcall filelock_init+0x0/0xd4 returned 0 after 0 usecs
vm1 | [ 0.095947] calling init_misc_binfmt+0x0/0x48 @ 1
vm1 | [ 0.095964] initcall init_misc_binfmt+0x0/0x48 returned 0 after 0 usecs
vm1 | [ 0.095974] calling init_script_binfmt+0x0/0x2c @ 1
vm1 | [ 0.095984] initcall init_script_binfmt+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 0.095995] calling init_elf_binfmt+0x0/0x2c @ 1
vm1 | [ 0.096006] initcall init_elf_binfmt+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 0.096016] calling init_compat_elf_binfmt+0x0/0x2c @ 1
vm1 | [ 0.096027] initcall init_compat_elf_binfmt+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 0.096048] calling configfs_init+0x0/0xb8 @ 1
vm1 | [ 0.096081] initcall configfs_init+0x0/0xb8 returned 0 after 0 usecs
vm1 | [ 0.096092] calling debugfs_init+0x0/0x90 @ 1
vm1 | [ 0.096115] initcall debugfs_init+0x0/0x90 returned 0 after 0 usecs
vm1 | [ 0.096127] calling prandom_init_early+0x0/0x128 @ 1
vm1 | [ 0.096138] initcall prandom_init_early+0x0/0x128 returned 0 after 0 usecs
vm1 | [ 0.096150] calling pinctrl_init+0x0/0xc4 @ 1
vm1 | [ 0.096157] pinctrl core: initialized pinctrl subsystem
vm1 | [ 0.096262] initcall pinctrl_init+0x0/0xc4 returned 0 after 0 usecs
vm1 | [ 0.096275] calling gpiolib_dev_init+0x0/0x120 @ 1
vm1 | [ 0.096357] initcall gpiolib_dev_init+0x0/0x120 returned 0 after 0 usecs
vm1 | [ 0.096367] calling component_debug_init+0x0/0x38 @ 1
vm1 | [ 0.096391] initcall component_debug_init+0x0/0x38 returned 0 after 0 usecs
vm1 | [ 0.096401] calling genpd_bus_init+0x0/0x28 @ 1
vm1 | [ 0.096432] initcall genpd_bus_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.096443] calling soc_bus_register+0x0/0x40 @ 1
vm1 | [ 0.096473] initcall soc_bus_register+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.096488] calling free_raw_capacity+0x0/0x34 @ 1
vm1 | [ 0.096500] initcall free_raw_capacity+0x0/0x34 returned 0 after 0 usecs
vm1 | [ 0.096509] calling sock_init+0x0/0xbc @ 1
vm1 | [ 0.096939] initcall sock_init+0x0/0xbc returned 0 after 0 usecs
vm1 | [ 0.096954] calling net_inuse_init+0x0/0x38 @ 1
vm1 | [ 0.096970] initcall net_inuse_init+0x0/0x38 returned 0 after 0 usecs
vm1 | [ 0.096982] calling net_defaults_init+0x0/0x38 @ 1
vm1 | [ 0.096993] initcall net_defaults_init+0x0/0x38 returned 0 after 0 usecs
vm1 | [ 0.097005] calling init_default_flow_dissectors+0x0/0x64 @ 1
vm1 | [ 0.097017] initcall init_default_flow_dissectors+0x0/0x64 returned 0 after 0 usecs
vm1 | [ 0.097028] calling netlink_proto_init+0x0/0x17c @ 1
vm1 | [ 0.097319] NET: Registered PF_NETLINK/PF_ROUTE protocol family
vm1 | [ 0.097364] initcall netlink_proto_init+0x0/0x17c returned 0 after 0 usecs
vm1 | [ 0.097377] calling genl_init+0x0/0x54 @ 1
vm1 | [ 0.097409] initcall genl_init+0x0/0x54 returned 0 after 0 usecs
vm1 | [ 0.097420] calling __gnttab_init+0x0/0x40 @ 1
vm1 | [ 0.097434] initcall __gnttab_init+0x0/0x40 returned -19 after 0 usecs
vm1 | [ 0.097509] calling debug_monitors_init+0x0/0x3c @ 1
vm1 | [ 0.097771] initcall debug_monitors_init+0x0/0x3c returned 0 after 0 usecs
vm1 | [ 0.097785] calling irq_sysfs_init+0x0/0x104 @ 1
vm1 | [ 0.098006] initcall irq_sysfs_init+0x0/0x104 returned 0 after 0 usecs
vm1 | [ 0.098016] calling dma_atomic_pool_init+0x0/0x154 @ 1
vm1 | [ 0.099162] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
vm1 | [ 0.099339] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
vm1 | [ 0.099495] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
vm1 | [ 0.099542] initcall dma_atomic_pool_init+0x0/0x154 returned 0 after 0 usecs
vm1 | [ 0.099558] calling bdi_class_init+0x0/0x78 @ 1
vm1 | [ 0.099606] initcall bdi_class_init+0x0/0x78 returned 0 after 0 usecs
vm1 | [ 0.099617] calling mm_sysfs_init+0x0/0x40 @ 1
vm1 | [ 0.099632] initcall mm_sysfs_init+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.099645] calling init_per_zone_wmark_min+0x0/0x84 @ 1
vm1 | [ 0.099666] initcall init_per_zone_wmark_min+0x0/0x84 returned 0 after 0 usecs
vm1 | [ 0.099676] calling kobject_uevent_init+0x0/0x24 @ 1
vm1 | [ 0.099702] initcall kobject_uevent_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.099713] calling gpiolib_sysfs_init+0x0/0xb8 @ 1
vm1 | [ 0.099738] initcall gpiolib_sysfs_init+0x0/0xb8 returned 0 after 0 usecs
vm1 | [ 0.099747] calling pcibus_class_init+0x0/0x2c @ 1
vm1 | [ 0.099764] initcall pcibus_class_init+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 0.099773] calling pci_driver_init+0x0/0x3c @ 1
vm1 | [ 0.099835] initcall pci_driver_init+0x0/0x3c returned 0 after 0 usecs
vm1 | [ 0.099847] calling amba_init+0x0/0x24 @ 1
vm1 | [ 0.099875] initcall amba_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.099885] calling xenbus_init+0x0/0x2e4 @ 1
vm1 | [ 0.099894] initcall xenbus_init+0x0/0x2e4 returned -19 after 0 usecs
vm1 | [ 0.099904] calling tty_class_init+0x0/0x58 @ 1
vm1 | [ 0.099924] initcall tty_class_init+0x0/0x58 returned 0 after 0 usecs
vm1 | [ 0.099935] calling vtconsole_class_init+0x0/0xfc @ 1
vm1 | [ 0.100022] initcall vtconsole_class_init+0x0/0xfc returned 0 after 0 usecs
vm1 | [ 0.100033] calling devlink_class_init+0x0/0x5c @ 1
vm1 | [ 0.100059] initcall devlink_class_init+0x0/0x5c returned 0 after 0 usecs
vm1 | [ 0.100070] calling software_node_init+0x0/0x44 @ 1
vm1 | [ 0.100083] initcall software_node_init+0x0/0x44 returned 0 after 0 usecs
vm1 | [ 0.100093] calling wakeup_sources_debugfs_init+0x0/0x3c @ 1
vm1 | [ 0.100124] initcall wakeup_sources_debugfs_init+0x0/0x3c returned 0 after 0 usecs
vm1 | [ 0.100135] calling wakeup_sources_sysfs_init+0x0/0x44 @ 1
vm1 | [ 0.100156] initcall wakeup_sources_sysfs_init+0x0/0x44 returned 0 after 0 usecs
vm1 | [ 0.100171] calling regmap_initcall+0x0/0x20 @ 1
vm1 | [ 0.100191] initcall regmap_initcall+0x0/0x20 returned 0 after 0 usecs
vm1 | [ 0.100202] calling syscon_init+0x0/0x28 @ 1
vm1 | [ 0.100234] initcall syscon_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.100245] calling spi_init+0x0/0xc8 @ 1
vm1 | [ 0.100297] initcall spi_init+0x0/0xc8 returned 0 after 0 usecs
vm1 | [ 0.100308] calling i2c_init+0x0/0xd8 @ 1
vm1 | [ 0.100357] initcall i2c_init+0x0/0xd8 returned 0 after 0 usecs
vm1 | [ 0.100369] calling thermal_init+0x0/0x148 @ 1
vm1 | [ 0.100379] thermal_sys: Registered thermal governor 'step_wise'
vm1 | [ 0.100974] initcall thermal_init+0x0/0x148 returned 0 after 0 usecs
vm1 | [ 0.101047] calling reserve_memblock_reserved_regions+0x0/0x15c @ 1
vm1 | [ 0.101092] initcall reserve_memblock_reserved_regions+0x0/0x15c returned 0 after 0 usecs
vm1 | [ 0.101106] calling aarch32_alloc_vdso_pages+0x0/0xf0 @ 1
vm1 | [ 0.101124] initcall aarch32_alloc_vdso_pages+0x0/0xf0 returned 0 after 0 usecs
vm1 | [ 0.101137] calling vdso_init+0x0/0xf4 @ 1
vm1 | [ 0.101150] initcall vdso_init+0x0/0xf4 returned 0 after 0 usecs
vm1 | [ 0.101165] calling arch_hw_breakpoint_init+0x0/0xf8 @ 1
vm1 | [ 0.101180] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
vm1 | [ 0.101531] initcall arch_hw_breakpoint_init+0x0/0xf8 returned 0 after 0 usecs
vm1 | [ 0.101546] calling adjust_protection_map+0x0/0x4c @ 1
vm1 | [ 0.101557] initcall adjust_protection_map+0x0/0x4c returned 0 after 0 usecs
vm1 | [ 0.101570] calling asids_update_limit+0x0/0xcc @ 1
vm1 | [ 0.101585] ASID allocator initialised with 65536 entries
vm1 | [ 0.101590] initcall asids_update_limit+0x0/0xcc returned 0 after 0 usecs
vm1 | [ 0.101601] calling hugetlbpage_init+0x0/0x3c @ 1
vm1 | [ 0.101618] initcall hugetlbpage_init+0x0/0x3c returned 0 after 0 usecs
vm1 | [ 0.101629] calling p2m_init+0x0/0x20 @ 1
vm1 | [ 0.101641] initcall p2m_init+0x0/0x20 returned 0 after 0 usecs
vm1 | [ 0.101653] calling xen_mm_init+0x0/0xb8 @ 1
vm1 | [ 0.101660] initcall xen_mm_init+0x0/0xb8 returned 0 after 0 usecs
vm1 | [ 0.101669] calling cryptomgr_init+0x0/0x24 @ 1
vm1 | [ 0.101681] initcall cryptomgr_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.101693] calling dma_channel_table_init+0x0/0x144 @ 1
vm1 | [ 0.101745] initcall dma_channel_table_init+0x0/0x144 returned 0 after 0 usecs
vm1 | [ 0.101757] calling dma_bus_init+0x0/0xf4 @ 1
vm1 | [ 0.101811] initcall dma_bus_init+0x0/0xf4 returned 0 after 0 usecs
vm1 | [ 0.101822] calling register_xen_platform_notifier+0x0/0x10 @ 1
vm1 | [ 0.101832] initcall register_xen_platform_notifier+0x0/0x10 returned 0 after 0 usecs
vm1 | [ 0.101843] calling register_xen_amba_notifier+0x0/0x10 @ 1
vm1 | [ 0.101852] initcall register_xen_amba_notifier+0x0/0x10 returned 0 after 0 usecs
vm1 | [ 0.101864] calling register_xen_pci_notifier+0x0/0x4c @ 1
vm1 | [ 0.101874] initcall register_xen_pci_notifier+0x0/0x4c returned 0 after 0 usecs
vm1 | [ 0.101885] calling pl011_init+0x0/0x58 @ 1
vm1 | [ 0.101894] Serial: AMBA PL011 UART driver
vm1 | [ 0.101926] initcall pl011_init+0x0/0x58 returned 0 after 0 usecs
vm1 | [ 0.101937] calling scmi_driver_init+0x0/0xa0 @ 1
vm1 | [ 0.101997] initcall scmi_driver_init+0x0/0xa0 returned 0 after 0 usecs
vm1 | [ 0.102007] calling scmi_pinctrl_register+0x0/0x24 @ 1
vm1 | [ 0.102019] initcall scmi_pinctrl_register+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.102030] calling register_scmi_gpio_proto+0x0/0x24 @ 1
vm1 | [ 0.102039] initcall register_scmi_gpio_proto+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.102050] calling register_scmi_nvmem_proto+0x0/0x24 @ 1
vm1 | [ 0.102060] initcall register_scmi_nvmem_proto+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.102070] calling of_platform_default_populate_init+0x0/0xc8 @ 1
vm1 | [ 0.103277] 12000.pl011_uart: ttyAMA0 at MMIO 0x12000 (irq = 14, base_baud = 0) is a PL011 rev3
vm1 | [ 0.103322] printk: console [ttyAMA0] enabled
vm1 | [ 0.103604] probe of 12000.pl011_uart returned 0 after 0 usecs
vm1 | [ 0.104408] initcall of_platform_default_populate_init+0x0/0xc8 returned 0 after 0 usecs
vm1 | [ 0.104476] calling topology_init+0x0/0xb4 @ 1
vm1 | [ 0.104766] initcall topology_init+0x0/0xb4 returned 0 after 0 usecs
vm1 | [ 0.104780] calling register_mte_tcf_preferred_sysctl+0x0/0xd0 @ 1
vm1 | [ 0.104792] initcall register_mte_tcf_preferred_sysctl+0x0/0xd0 returned 0 after 0 usecs
vm1 | [ 0.104803] calling uid_cache_init+0x0/0xcc @ 1
vm1 | [ 0.104869] initcall uid_cache_init+0x0/0xcc returned 0 after 0 usecs
vm1 | [ 0.104879] calling param_sysfs_init+0x0/0x1dc @ 1
vm1 | [ 0.109401] initcall param_sysfs_init+0x0/0x1dc returned 0 after 0 usecs
vm1 | [ 0.109414] calling user_namespace_sysctl_init+0x0/0xe4 @ 1
vm1 | [ 0.109457] initcall user_namespace_sysctl_init+0x0/0xe4 returned 0 after 0 usecs
vm1 | [ 0.109469] calling cgroup_sysfs_init+0x0/0x30 @ 1
vm1 | [ 0.109490] initcall cgroup_sysfs_init+0x0/0x30 returned 0 after 0 usecs
vm1 | [ 0.109513] calling cgroup_namespaces_init+0x0/0x10 @ 1
vm1 | [ 0.109524] initcall cgroup_namespaces_init+0x0/0x10 returned 0 after 0 usecs
vm1 | [ 0.109536] calling user_namespaces_init+0x0/0x44 @ 1
vm1 | [ 0.109569] initcall user_namespaces_init+0x0/0x44 returned 0 after 0 usecs
vm1 | [ 0.109581] calling dev_map_init+0x0/0x84 @ 1
vm1 | [ 0.109596] initcall dev_map_init+0x0/0x84 returned 0 after 0 usecs
vm1 | [ 0.109607] calling cpu_map_init+0x0/0x78 @ 1
vm1 | [ 0.109619] initcall cpu_map_init+0x0/0x78 returned 0 after 0 usecs
vm1 | [ 0.109631] calling netns_bpf_init+0x0/0x28 @ 1
vm1 | [ 0.109646] initcall netns_bpf_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.109656] calling stack_map_init+0x0/0x8c @ 1
vm1 | [ 0.109666] initcall stack_map_init+0x0/0x8c returned 0 after 0 usecs
vm1 | [ 0.109676] calling oom_init+0x0/0x44 @ 1
vm1 | [ 0.109925] initcall oom_init+0x0/0x44 returned 0 after 0 usecs
vm1 | [ 0.109938] calling default_bdi_init+0x0/0x40 @ 1
vm1 | [ 0.110147] initcall default_bdi_init+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.110161] calling percpu_enable_async+0x0/0x1c @ 1
vm1 | [ 0.110174] initcall percpu_enable_async+0x0/0x1c returned 0 after 0 usecs
vm1 | [ 0.110186] calling kcompactd_init+0x0/0x6c @ 1
vm1 | [ 0.110312] initcall kcompactd_init+0x0/0x6c returned 0 after 0 usecs
vm1 | [ 0.110325] calling init_user_reserve+0x0/0x3c @ 1
vm1 | [ 0.110338] initcall init_user_reserve+0x0/0x3c returned 0 after 0 usecs
vm1 | [ 0.110349] calling init_admin_reserve+0x0/0x40 @ 1
vm1 | [ 0.110359] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.110369] calling init_reserve_notifier+0x0/0x10 @ 1
vm1 | [ 0.110380] initcall init_reserve_notifier+0x0/0x10 returned 0 after 0 usecs
vm1 | [ 0.110389] calling hugetlb_init+0x0/0x49c @ 1
vm1 | [ 0.110409] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
vm1 | [ 0.110416] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
vm1 | [ 0.110421] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
vm1 | [ 0.110427] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
vm1 | [ 0.110494] initcall hugetlb_init+0x0/0x49c returned 0 after 0 usecs
vm1 | [ 0.110506] calling hmac_module_init+0x0/0x24 @ 1
vm1 | [ 0.110519] initcall hmac_module_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.110531] calling crypto_null_mod_init+0x0/0x88 @ 1
vm1 | [ 0.111176] initcall crypto_null_mod_init+0x0/0x88 returned 0 after 0 usecs
vm1 | [ 0.111191] calling sha256_generic_mod_init+0x0/0x28 @ 1
vm1 | [ 0.111512] initcall sha256_generic_mod_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.111527] calling crc32c_mod_init+0x0/0x24 @ 1
vm1 | [ 0.111699] initcall crc32c_mod_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.111713] calling init_bio+0x0/0xbc @ 1
vm1 | [ 0.111826] initcall init_bio+0x0/0xbc returned 0 after 0 usecs
vm1 | [ 0.111840] calling blk_ioc_init+0x0/0x44 @ 1
vm1 | [ 0.111855] initcall blk_ioc_init+0x0/0x44 returned 0 after 0 usecs
vm1 | [ 0.111867] calling blk_mq_init+0x0/0xf0 @ 1
vm1 | [ 0.111883] initcall blk_mq_init+0x0/0xf0 returned 0 after 0 usecs
vm1 | [ 0.111896] calling genhd_device_init+0x0/0x80 @ 1
vm1 | [ 0.112099] initcall genhd_device_init+0x0/0x80 returned 0 after 0 usecs
vm1 | [ 0.112116] calling io_wq_init+0x0/0x50 @ 1
vm1 | [ 0.112130] initcall io_wq_init+0x0/0x50 returned 0 after 0 usecs
vm1 | [ 0.112142] calling gpiolib_debugfs_init+0x0/0x40 @ 1
vm1 | [ 0.112160] initcall gpiolib_debugfs_init+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.112170] calling pca953x_init+0x0/0x28 @ 1
vm1 | [ 0.112209] initcall pca953x_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.112219] calling pwm_debugfs_init+0x0/0x3c @ 1
vm1 | [ 0.112241] initcall pwm_debugfs_init+0x0/0x3c returned 0 after 0 usecs
vm1 | [ 0.112250] calling pwm_sysfs_init+0x0/0x2c @ 1
vm1 | [ 0.112270] initcall pwm_sysfs_init+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 0.112280] calling pci_slot_init+0x0/0x60 @ 1
vm1 | [ 0.112298] initcall pci_slot_init+0x0/0x60 returned 0 after 0 usecs
vm1 | [ 0.112308] calling scmi_clk_drv_init+0x0/0x30 @ 1
vm1 | [ 0.112354] initcall scmi_clk_drv_init+0x0/0x30 returned 0 after 0 usecs
vm1 | [ 0.112367] calling fsl_edma_init+0x0/0x28 @ 1
vm1 | [ 0.112423] initcall fsl_edma_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.112432] calling balloon_init+0x0/0xbc @ 1
vm1 | [ 0.112442] initcall balloon_init+0x0/0xbc returned -19 after 0 usecs
vm1 | [ 0.112453] calling xen_setup_shutdown_event+0x0/0x50 @ 1
vm1 | [ 0.112466] initcall xen_setup_shutdown_event+0x0/0x50 returned -19 after 0 usecs
vm1 | [ 0.112478] calling xenbus_probe_backend_init+0x0/0x5c @ 1
vm1 | [ 0.112517] initcall xenbus_probe_backend_init+0x0/0x5c returned 0 after 0 usecs
vm1 | [ 0.112528] calling xenbus_probe_frontend_init+0x0/0x44 @ 1
vm1 | [ 0.112559] initcall xenbus_probe_frontend_init+0x0/0x44 returned 0 after 0 usecs
vm1 | [ 0.112571] calling misc_init+0x0/0xec @ 1
vm1 | [ 0.112610] initcall misc_init+0x0/0xec returned 0 after 0 usecs
vm1 | [ 0.112622] calling vga_arb_device_init+0x0/0x1bc @ 1
vm1 | [ 0.112765] vgaarb: loaded
vm1 | [ 0.112768] initcall vga_arb_device_init+0x0/0x1bc returned 0 after 0 usecs
vm1 | [ 0.112779] calling register_cpu_capacity_sysctl+0x0/0xa0 @ 1
vm1 | [ 0.112810] initcall register_cpu_capacity_sysctl+0x0/0xa0 returned 0 after 0 usecs
vm1 | [ 0.112825] calling init_scsi+0x0/0x9c @ 1
vm1 | [ 0.113000] SCSI subsystem initialized
vm1 | [ 0.113003] initcall init_scsi+0x0/0x9c returned 0 after 0 usecs
vm1 | [ 0.113014] calling phy_init+0x0/0x1a8 @ 1
vm1 | [ 0.113090] initcall phy_init+0x0/0x1a8 returned 0 after 0 usecs
vm1 | [ 0.113102] calling usb_common_init+0x0/0x38 @ 1
vm1 | [ 0.113123] initcall usb_common_init+0x0/0x38 returned 0 after 0 usecs
vm1 | [ 0.113134] calling ulpi_init+0x0/0x24 @ 1
vm1 | [ 0.113166] initcall ulpi_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.113178] calling usb_init+0x0/0x150 @ 1
vm1 | [ 0.113264] usbcore: registered new interface driver usbfs
vm1 | [ 0.113298] usbcore: registered new interface driver hub
vm1 | [ 0.113331] usbcore: registered new device driver usb
vm1 | [ 0.113337] initcall usb_init+0x0/0x150 returned 0 after 0 usecs
vm1 | [ 0.113348] calling usb_phy_generic_init+0x0/0x28 @ 1
vm1 | [ 0.113525] probe of usbphynop returned 0 after 0 usecs
vm1 | [ 0.113546] initcall usb_phy_generic_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.113560] calling usb_udc_init+0x0/0x6c @ 1
vm1 | [ 0.113584] initcall usb_udc_init+0x0/0x6c returned 0 after 0 usecs
vm1 | [ 0.113595] calling usb_roles_init+0x0/0x48 @ 1
vm1 | [ 0.113613] initcall usb_roles_init+0x0/0x48 returned 0 after 0 usecs
vm1 | [ 0.113627] calling serio_init+0x0/0x4c @ 1
vm1 | [ 0.113662] initcall serio_init+0x0/0x4c returned 0 after 0 usecs
vm1 | [ 0.113676] calling input_init+0x0/0x128 @ 1
vm1 | [ 0.113705] initcall input_init+0x0/0x128 returned 0 after 0 usecs
vm1 | [ 0.113719] calling rtc_init+0x0/0x6c @ 1
vm1 | [ 0.113742] initcall rtc_init+0x0/0x6c returned 0 after 0 usecs
vm1 | [ 0.113754] calling i2c_adap_imx_init+0x0/0x28 @ 1
vm1 | [ 0.113794] initcall i2c_adap_imx_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.113806] calling pps_init+0x0/0xd4 @ 1
vm1 | [ 0.113826] pps_core: LinuxPPS API ver. 1 registered
vm1 | [ 0.113829] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
vm1 | [ 0.113832] initcall pps_init+0x0/0xd4 returned 0 after 0 usecs
vm1 | [ 0.113844] calling ptp_init+0x0/0xc0 @ 1
vm1 | [ 0.113867] PTP clock support registered
vm1 | [ 0.113869] initcall ptp_init+0x0/0xc0 returned 0 after 0 usecs
vm1 | [ 0.113882] calling power_supply_class_init+0x0/0x64 @ 1
vm1 | [ 0.113915] initcall power_supply_class_init+0x0/0x64 returned 0 after 0 usecs
vm1 | [ 0.113929] calling hwmon_init+0x0/0x50 @ 1
vm1 | [ 0.113946] initcall hwmon_init+0x0/0x50 returned 0 after 0 usecs
vm1 | [ 0.113956] calling mmc_init+0x0/0x50 @ 1
vm1 | [ 0.114021] initcall mmc_init+0x0/0x50 returned 0 after 0 usecs
vm1 | [ 0.114030] calling iio_init+0x0/0xac @ 1
vm1 | [ 0.114070] initcall iio_init+0x0/0xac returned 0 after 0 usecs
vm1 | [ 0.114082] calling arm_pmu_hp_init+0x0/0x70 @ 1
vm1 | [ 0.114096] initcall arm_pmu_hp_init+0x0/0x70 returned 0 after 0 usecs
vm1 | [ 0.114110] calling nvmem_init+0x0/0x28 @ 1
vm1 | [ 0.114140] initcall nvmem_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 0.114150] calling mux_init+0x0/0x38 @ 1
vm1 | [ 0.114169] initcall mux_init+0x0/0x38 returned 0 after 0 usecs
vm1 | [ 0.114179] calling proto_init+0x0/0x24 @ 1
vm1 | [ 0.114197] initcall proto_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.114205] calling net_dev_init+0x0/0x214 @ 1
vm1 | [ 0.114546] initcall net_dev_init+0x0/0x214 returned 0 after 0 usecs
vm1 | [ 0.114559] calling neigh_init+0x0/0xac @ 1
vm1 | [ 0.114572] initcall neigh_init+0x0/0xac returned 0 after 0 usecs
vm1 | [ 0.114583] calling fib_notifier_init+0x0/0x24 @ 1
vm1 | [ 0.114598] initcall fib_notifier_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 0.114609] calling fib_rules_init+0x0/0xd8 @ 1
vm1 | [ 0.114623] initcall fib_rules_init+0x0/0xd8 returned 0 after 0 usecs
vm1 | [ 0.114633] calling devlink_init+0x0/0x40 @ 1
vm1 | [ 0.114804] initcall devlink_init+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.114816] calling ethnl_init+0x0/0x7c @ 1
vm1 | [ 0.114873] initcall ethnl_init+0x0/0x7c returned 0 after 0 usecs
vm1 | [ 0.114883] calling nexthop_init+0x0/0x11c @ 1
vm1 | [ 0.114906] initcall nexthop_init+0x0/0x11c returned 0 after 0 usecs
vm1 | [ 0.114917] calling init_32bit_el0_mask+0x0/0x58 @ 1
vm1 | [ 0.114930] initcall init_32bit_el0_mask+0x0/0x58 returned 0 after 0 usecs
vm1 | [ 0.114945] calling watchdog_init+0x0/0x98 @ 1
vm1 | [ 0.115153] initcall watchdog_init+0x0/0x98 returned 0 after 0 usecs
vm1 | [ 0.115226] calling create_debug_debugfs_entry+0x0/0x40 @ 1
vm1 | [ 0.115248] initcall create_debug_debugfs_entry+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 0.115259] calling iomem_init_inode+0x0/0xb4 @ 1
vm1 | [ 0.115323] initcall iomem_init_inode+0x0/0xb4 returned 0 after 0 usecs
vm1 | [ 0.115335] calling clocksource_done_booting+0x0/0x64 @ 1
vm1 | [ 0.115430] clocksource: Switched to clocksource arch_sys_counter
vm1 | [ 0.115435] initcall clocksource_done_booting+0x0/0x64 returned 0 after 26 usecs
vm1 | [ 0.115447] calling bpf_init+0x0/0x6c @ 1
vm1 | [ 0.115467] initcall bpf_init+0x0/0x6c returned 0 after 11 usecs
vm1 | [ 0.115479] calling init_pipe_fs+0x0/0x60 @ 1
vm1 | [ 0.115515] initcall init_pipe_fs+0x0/0x60 returned 0 after 25 usecs
vm1 | [ 0.115525] calling inotify_user_setup+0x0/0xd0 @ 1
vm1 | [ 0.115550] initcall inotify_user_setup+0x0/0xd0 returned 0 after 14 usecs
vm1 | [ 0.115562] calling eventpoll_init+0x0/0xec @ 1
vm1 | [ 0.115592] initcall eventpoll_init+0x0/0xec returned 0 after 19 usecs
vm1 | [ 0.115605] calling anon_inode_init+0x0/0x70 @ 1
vm1 | [ 0.115638] initcall anon_inode_init+0x0/0x70 returned 0 after 20 usecs
vm1 | [ 0.115650] calling proc_locks_init+0x0/0x40 @ 1
vm1 | [ 0.115666] initcall proc_locks_init+0x0/0x40 returned 0 after 4 usecs
vm1 | [ 0.115678] calling iomap_init+0x0/0x30 @ 1
vm1 | [ 0.115747] initcall iomap_init+0x0/0x30 returned 0 after 58 usecs
vm1 | [ 0.115757] calling proc_cmdline_init+0x0/0x3c @ 1
vm1 | [ 0.115771] initcall proc_cmdline_init+0x0/0x3c returned 0 after 4 usecs
vm1 | [ 0.115783] calling proc_consoles_init+0x0/0x40 @ 1
vm1 | [ 0.115796] initcall proc_consoles_init+0x0/0x40 returned 0 after 3 usecs
vm1 | [ 0.115808] calling proc_cpuinfo_init+0x0/0x38 @ 1
vm1 | [ 0.115822] initcall proc_cpuinfo_init+0x0/0x38 returned 0 after 2 usecs
vm1 | [ 0.115833] calling proc_devices_init+0x0/0x40 @ 1
vm1 | [ 0.115846] initcall proc_devices_init+0x0/0x40 returned 0 after 1 usecs
vm1 | [ 0.115858] calling proc_interrupts_init+0x0/0x40 @ 1
vm1 | [ 0.115873] initcall proc_interrupts_init+0x0/0x40 returned 0 after 4 usecs
vm1 | [ 0.115889] calling proc_loadavg_init+0x0/0x3c @ 1
vm1 | [ 0.115902] initcall proc_loadavg_init+0x0/0x3c returned 0 after 2 usecs
vm1 | [ 0.115913] calling proc_meminfo_init+0x0/0x3c @ 1
vm1 | [ 0.115924] initcall proc_meminfo_init+0x0/0x3c returned 0 after 1 usecs
vm1 | [ 0.115935] calling proc_stat_init+0x0/0x38 @ 1
vm1 | [ 0.115948] initcall proc_stat_init+0x0/0x38 returned 0 after 2 usecs
vm1 | [ 0.115960] calling proc_uptime_init+0x0/0x3c @ 1
vm1 | [ 0.115973] initcall proc_uptime_init+0x0/0x3c returned 0 after 2 usecs
vm1 | [ 0.115985] calling proc_version_init+0x0/0x3c @ 1
vm1 | [ 0.115997] initcall proc_version_init+0x0/0x3c returned 0 after 1 usecs
vm1 | [ 0.116009] calling proc_softirqs_init+0x0/0x3c @ 1
vm1 | [ 0.116022] initcall proc_softirqs_init+0x0/0x3c returned 0 after 2 usecs
vm1 | [ 0.116033] calling proc_kmsg_init+0x0/0x38 @ 1
vm1 | [ 0.116047] initcall proc_kmsg_init+0x0/0x38 returned 0 after 1 usecs
vm1 | [ 0.116058] calling proc_page_init+0x0/0x5c @ 1
vm1 | [ 0.116072] initcall proc_page_init+0x0/0x5c returned 0 after 4 usecs
vm1 | [ 0.116086] calling init_ramfs_fs+0x0/0x24 @ 1
vm1 | [ 0.116101] initcall init_ramfs_fs+0x0/0x24 returned 0 after 5 usecs
vm1 | [ 0.116112] calling init_hugetlbfs_fs+0x0/0x128 @ 1
vm1 | [ 0.116215] initcall init_hugetlbfs_fs+0x0/0x128 returned 0 after 90 usecs
vm1 | [ 0.116227] calling chr_dev_init+0x0/0xc8 @ 1
vm1 | [ 0.124234] initcall chr_dev_init+0x0/0xc8 returned 0 after 7809 usecs
vm1 | [ 0.124253] calling firmware_class_init+0x0/0xe0 @ 1
vm1 | [ 0.124268] initcall firmware_class_init+0x0/0xe0 returned 0 after 4 usecs
vm1 | [ 0.124279] calling sysctl_core_init+0x0/0x48 @ 1
vm1 | [ 0.124330] initcall sysctl_core_init+0x0/0x48 returned 0 after 40 usecs
vm1 | [ 0.124341] calling eth_offload_init+0x0/0x28 @ 1
vm1 | [ 0.124353] initcall eth_offload_init+0x0/0x28 returned 0 after 2 usecs
vm1 | [ 0.124363] calling ipv4_offload_init+0x0/0x88 @ 1
vm1 | [ 0.124377] initcall ipv4_offload_init+0x0/0x88 returned 0 after 2 usecs
vm1 | [ 0.124387] calling inet_init+0x0/0x268 @ 1
vm1 | [ 0.124461] NET: Registered PF_INET protocol family
vm1 | [ 0.124599] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
vm1 | [ 0.125107] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
vm1 | [ 0.125125] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
vm1 | [ 0.125137] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
vm1 | [ 0.125177] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
vm1 | [ 0.125250] TCP: Hash tables configured (established 4096 bind 4096)
vm1 | [ 0.125334] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
vm1 | [ 0.125355] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
vm1 | [ 0.125492] initcall inet_init+0x0/0x268 returned 0 after 1070 usecs
vm1 | [ 0.125509] calling af_unix_init+0x0/0xcc @ 1
vm1 | [ 0.125537] NET: Registered PF_UNIX/PF_LOCAL protocol family
vm1 | [ 0.125557] initcall af_unix_init+0x0/0xcc returned 0 after 37 usecs
vm1 | [ 0.125569] calling ipv6_offload_init+0x0/0x8c @ 1
vm1 | [ 0.125586] initcall ipv6_offload_init+0x0/0x8c returned 0 after 5 usecs
vm1 | [ 0.125599] calling init_sunrpc+0x0/0x94 @ 1
vm1 | [ 0.126244] RPC: Registered named UNIX socket transport module.
vm1 | [ 0.126249] RPC: Registered udp transport module.
vm1 | [ 0.126252] RPC: Registered tcp transport module.
vm1 | [ 0.126255] RPC: Registered tcp NFSv4.1 backchannel transport module.
vm1 | [ 0.126258] initcall init_sunrpc+0x0/0x94 returned 0 after 632 usecs
vm1 | [ 0.126273] calling vlan_offload_init+0x0/0x3c @ 1
vm1 | [ 0.126286] initcall vlan_offload_init+0x0/0x3c returned 0 after 2 usecs
vm1 | [ 0.126297] calling pci_apply_final_quirks+0x0/0x14c @ 1
vm1 | [ 0.126311] PCI: CLS 0 bytes, default 64
vm1 | [ 0.126315] initcall pci_apply_final_quirks+0x0/0x14c returned 0 after 8 usecs
vm1 | [ 0.126326] calling populate_rootfs+0x0/0x5c @ 1
vm1 | [ 0.126431] initcall populate_rootfs+0x0/0x5c returned 0 after 91 usecs
vm1 | [ 0.126648] Unpacking initramfs...
vm1 | [ 1.628983] Freeing initrd memory: 25676K
vm1 | [ 1.632541] calling register_arm64_panic_block+0x0/0x30 @ 1
vm1 | [ 1.632583] initcall register_arm64_panic_block+0x0/0x30 returned 0 after 1 usecs
vm1 | [ 1.632598] calling cpuinfo_regs_init+0x0/0xcc @ 1
vm1 | [ 1.633030] initcall cpuinfo_regs_init+0x0/0xcc returned 0 after 410 usecs
vm1 | [ 1.633050] calling aarch32_el0_sysfs_init+0x0/0x40 @ 1
vm1 | [ 1.633062] initcall aarch32_el0_sysfs_init+0x0/0x40 returned 0 after 0 usecs
vm1 | [ 1.633075] calling armv8_pmu_driver_init+0x0/0x28 @ 1
vm1 | [ 1.633188] initcall armv8_pmu_driver_init+0x0/0x28 returned 0 after 101 usecs
vm1 | [ 1.633201] calling proc_execdomains_init+0x0/0x3c @ 1
vm1 | [ 1.633226] initcall proc_execdomains_init+0x0/0x3c returned 0 after 16 usecs
vm1 | [ 1.633235] calling register_warn_debugfs+0x0/0x3c @ 1
vm1 | [ 1.633272] initcall register_warn_debugfs+0x0/0x3c returned 0 after 28 usecs
vm1 | [ 1.633281] calling cpuhp_sysfs_init+0x0/0xbc @ 1
vm1 | [ 1.633334] initcall cpuhp_sysfs_init+0x0/0xbc returned 0 after 44 usecs
vm1 | [ 1.633356] calling ioresources_init+0x0/0x74 @ 1
vm1 | [ 1.633372] initcall ioresources_init+0x0/0x74 returned 0 after 7 usecs
vm1 | [ 1.633383] calling psi_proc_init+0x0/0x98 @ 1
vm1 | [ 1.633406] initcall psi_proc_init+0x0/0x98 returned 0 after 13 usecs
vm1 | [ 1.633415] calling irq_pm_init_ops+0x0/0x28 @ 1
vm1 | [ 1.633425] initcall irq_pm_init_ops+0x0/0x28 returned 0 after 2 usecs
vm1 | [ 1.633437] calling timekeeping_init_ops+0x0/0x2c @ 1
vm1 | [ 1.633449] initcall timekeeping_init_ops+0x0/0x2c returned 0 after 1 usecs
vm1 | [ 1.633461] calling init_clocksource_sysfs+0x0/0x40 @ 1
vm1 | [ 1.633606] initcall init_clocksource_sysfs+0x0/0x40 returned 0 after 132 usecs
vm1 | [ 1.633619] calling init_timer_list_procfs+0x0/0x48 @ 1
vm1 | [ 1.633633] initcall init_timer_list_procfs+0x0/0x48 returned 0 after 5 usecs
vm1 | [ 1.633646] calling alarmtimer_init+0x0/0xc0 @ 1
vm1 | [ 1.633679] initcall alarmtimer_init+0x0/0xc0 returned 0 after 22 usecs
vm1 | [ 1.633692] calling init_posix_timers+0x0/0x44 @ 1
vm1 | [ 1.633718] initcall init_posix_timers+0x0/0x44 returned 0 after 14 usecs
vm1 | [ 1.633731] calling clockevents_init_sysfs+0x0/0xe8 @ 1
vm1 | [ 1.633955] initcall clockevents_init_sysfs+0x0/0xe8 returned 0 after 207 usecs
vm1 | [ 1.633967] calling sched_clock_syscore_init+0x0/0x2c @ 1
vm1 | [ 1.633978] initcall sched_clock_syscore_init+0x0/0x2c returned 0 after 0 usecs
vm1 | [ 1.633989] calling proc_modules_init+0x0/0x3c @ 1
vm1 | [ 1.634004] initcall proc_modules_init+0x0/0x3c returned 0 after 5 usecs
vm1 | [ 1.634016] calling kallsyms_init+0x0/0x38 @ 1
vm1 | [ 1.634030] initcall kallsyms_init+0x0/0x38 returned 0 after 4 usecs
vm1 | [ 1.634041] calling pid_namespaces_init+0x0/0x44 @ 1
vm1 | [ 1.634099] initcall pid_namespaces_init+0x0/0x44 returned 0 after 44 usecs
vm1 | [ 1.634111] calling ikconfig_init+0x0/0x5c @ 1
vm1 | [ 1.634124] initcall ikconfig_init+0x0/0x5c returned 0 after 2 usecs
vm1 | [ 1.634135] calling seccomp_sysctl_init+0x0/0x3c @ 1
vm1 | [ 1.634166] initcall seccomp_sysctl_init+0x0/0x3c returned 0 after 20 usecs
vm1 | [ 1.634178] calling utsname_sysctl_init+0x0/0x28 @ 1
vm1 | [ 1.634203] initcall utsname_sysctl_init+0x0/0x28 returned 0 after 14 usecs
vm1 | [ 1.634219] calling perf_event_sysfs_init+0x0/0xb8 @ 1
vm1 | [ 1.634328] initcall perf_event_sysfs_init+0x0/0xb8 returned 0 after 96 usecs
vm1 | [ 1.634340] calling kswapd_init+0x0/0x28 @ 1
vm1 | [ 1.634560] initcall kswapd_init+0x0/0x28 returned 0 after 205 usecs
vm1 | [ 1.634575] calling extfrag_debug_init+0x0/0x78 @ 1
vm1 | [ 1.634611] initcall extfrag_debug_init+0x0/0x78 returned 0 after 25 usecs
vm1 | [ 1.634625] calling mm_compute_batch_init+0x0/0x28 @ 1
vm1 | [ 1.634637] initcall mm_compute_batch_init+0x0/0x28 returned 0 after 1 usecs
vm1 | [ 1.634650] calling slab_proc_init+0x0/0x38 @ 1
vm1 | [ 1.634664] initcall slab_proc_init+0x0/0x38 returned 0 after 4 usecs
vm1 | [ 1.634675] calling workingset_init+0x0/0xbc @ 1
vm1 | [ 1.634688] workingset: timestamp_bits=62 max_order=17 bucket_order=0
vm1 | [ 1.634695] initcall workingset_init+0x0/0xbc returned 0 after 9 usecs
vm1 | [ 1.634708] calling proc_vmalloc_init+0x0/0x40 @ 1
vm1 | [ 1.634724] initcall proc_vmalloc_init+0x0/0x40 returned 0 after 4 usecs
vm1 | [ 1.634736] calling memblock_init_debugfs+0x0/0x88 @ 1
vm1 | [ 1.634759] initcall memblock_init_debugfs+0x0/0x88 returned 0 after 15 usecs
vm1 | [ 1.634768] calling cpucache_init+0x0/0x4c @ 1
vm1 | [ 1.634940] initcall cpucache_init+0x0/0x4c returned 0 after 159 usecs
vm1 | [ 1.634955] calling fcntl_init+0x0/0x44 @ 1
vm1 | [ 1.634973] initcall fcntl_init+0x0/0x44 returned 0 after 8 usecs
vm1 | [ 1.634982] calling proc_filesystems_init+0x0/0x3c @ 1
vm1 | [ 1.634996] initcall proc_filesystems_init+0x0/0x3c returned 0 after 4 usecs
vm1 | [ 1.635007] calling start_dirtytime_writeback+0x0/0x44 @ 1
vm1 | [ 1.635022] initcall start_dirtytime_writeback+0x0/0x44 returned 0 after 4 usecs
vm1 | [ 1.635033] calling dio_init+0x0/0x44 @ 1
vm1 | [ 1.635059] initcall dio_init+0x0/0x44 returned 0 after 14 usecs
vm1 | [ 1.635071] calling dnotify_init+0x0/0x94 @ 1
vm1 | [ 1.635088] initcall dnotify_init+0x0/0x94 returned 0 after 7 usecs
vm1 | [ 1.635097] calling aio_setup+0x0/0xa0 @ 1
vm1 | [ 1.635161] initcall aio_setup+0x0/0xa0 returned 0 after 53 usecs
vm1 | [ 1.635173] calling mbcache_init+0x0/0x48 @ 1
vm1 | [ 1.635234] initcall mbcache_init+0x0/0x48 returned 0 after 47 usecs
vm1 | [ 1.635245] calling init_grace+0x0/0x24 @ 1
vm1 | [ 1.635260] initcall init_grace+0x0/0x24 returned 0 after 6 usecs
vm1 | [ 1.635273] calling init_devpts_fs+0x0/0x44 @ 1
vm1 | [ 1.635308] initcall init_devpts_fs+0x0/0x44 returned 0 after 23 usecs
vm1 | [ 1.635320] calling ext4_init_fs+0x0/0x184 @ 1
vm1 | [ 1.635457] initcall ext4_init_fs+0x0/0x184 returned 0 after 122 usecs
vm1 | [ 1.635471] calling init_ext2_fs+0x0/0x80 @ 1
vm1 | [ 1.635489] initcall init_ext2_fs+0x0/0x80 returned 0 after 7 usecs
vm1 | [ 1.635500] calling journal_init+0x0/0x130 @ 1
vm1 | [ 1.635559] initcall journal_init+0x0/0x130 returned 0 after 48 usecs
vm1 | [ 1.635572] calling init_fat_fs+0x0/0x64 @ 1
vm1 | [ 1.635597] initcall init_fat_fs+0x0/0x64 returned 0 after 14 usecs
vm1 | [ 1.635608] calling init_vfat_fs+0x0/0x24 @ 1
vm1 | [ 1.635621] initcall init_vfat_fs+0x0/0x24 returned 0 after 3 usecs
vm1 | [ 1.635632] calling init_nfs_fs+0x0/0x14c @ 1
vm1 | [ 1.635974] initcall init_nfs_fs+0x0/0x14c returned 0 after 323 usecs
vm1 | [ 1.635988] calling init_nfs_v2+0x0/0x28 @ 1
vm1 | [ 1.636002] initcall init_nfs_v2+0x0/0x28 returned 0 after 2 usecs
vm1 | [ 1.636013] calling init_nfs_v3+0x0/0x28 @ 1
vm1 | [ 1.636024] initcall init_nfs_v3+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 1.636036] calling init_nlm+0x0/0x80 @ 1
vm1 | [ 1.636063] initcall init_nlm+0x0/0x80 returned 0 after 16 usecs
vm1 | [ 1.636075] calling init_nls_cp437+0x0/0x28 @ 1
vm1 | [ 1.636087] initcall init_nls_cp437+0x0/0x28 returned 0 after 2 usecs
vm1 | [ 1.636100] calling init_nls_iso8859_1+0x0/0x28 @ 1
vm1 | [ 1.636111] initcall init_nls_iso8859_1+0x0/0x28 returned 0 after 1 usecs
vm1 | [ 1.636124] calling init_autofs_fs+0x0/0x40 @ 1
vm1 | [ 1.636270] initcall init_autofs_fs+0x0/0x40 returned 0 after 133 usecs
vm1 | [ 1.636285] calling fuse_init+0x0/0x150 @ 1
vm1 | [ 1.636298] fuse: init (API version 7.34)
vm1 | [ 1.636438] initcall fuse_init+0x0/0x150 returned 0 after 137 usecs
vm1 | [ 1.636454] calling ipc_init+0x0/0x38 @ 1
vm1 | [ 1.636500] initcall ipc_init+0x0/0x38 returned 0 after 33 usecs
vm1 | [ 1.636514] calling ipc_sysctl_init+0x0/0x28 @ 1
vm1 | [ 1.636541] initcall ipc_sysctl_init+0x0/0x28 returned 0 after 15 usecs
vm1 | [ 1.636553] calling crypto_algapi_init+0x0/0x20 @ 1
vm1 | [ 1.636569] initcall crypto_algapi_init+0x0/0x20 returned 0 after 3 usecs
vm1 | [ 1.636580] calling af_alg_init+0x0/0x64 @ 1
vm1 | [ 1.636594] NET: Registered PF_ALG protocol family
vm1 | [ 1.636598] initcall af_alg_init+0x0/0x64 returned 0 after 7 usecs
vm1 | [ 1.636610] calling algif_hash_init+0x0/0x24 @ 1
vm1 | [ 1.636623] initcall algif_hash_init+0x0/0x24 returned 0 after 1 usecs
vm1 | [ 1.636634] calling algif_skcipher_init+0x0/0x24 @ 1
vm1 | [ 1.636646] initcall algif_skcipher_init+0x0/0x24 returned 0 after 1 usecs
vm1 | [ 1.636658] calling algif_aead_init+0x0/0x24 @ 1
vm1 | [ 1.636671] initcall algif_aead_init+0x0/0x24 returned 0 after 1 usecs
vm1 | [ 1.636683] calling blkdev_init+0x0/0x30 @ 1
vm1 | [ 1.636719] initcall blkdev_init+0x0/0x30 returned 0 after 24 usecs
vm1 | [ 1.636731] calling proc_genhd_init+0x0/0x6c @ 1
vm1 | [ 1.636748] initcall proc_genhd_init+0x0/0x6c returned 0 after 5 usecs
vm1 | [ 1.636762] calling bsg_init+0x0/0xd8 @ 1
vm1 | [ 1.636792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
vm1 | [ 1.636796] initcall bsg_init+0x0/0xd8 returned 0 after 21 usecs
vm1 | [ 1.636808] calling deadline_init+0x0/0x24 @ 1
vm1 | [ 1.636821] io scheduler mq-deadline registered
vm1 | [ 1.636825] initcall deadline_init+0x0/0x24 returned 0 after 5 usecs
vm1 | [ 1.636836] calling kyber_init+0x0/0x24 @ 1
vm1 | [ 1.636849] io scheduler kyber registered
vm1 | [ 1.636851] initcall kyber_init+0x0/0x24 returned 0 after 4 usecs
vm1 | [ 1.636863] calling io_uring_init+0x0/0x48 @ 1
vm1 | [ 1.636877] initcall io_uring_init+0x0/0x48 returned 0 after 2 usecs
vm1 | [ 1.636889] calling blake2s_mod_init+0x0/0x10 @ 1
vm1 | [ 1.636900] initcall blake2s_mod_init+0x0/0x10 returned 0 after 0 usecs
vm1 | [ 1.636912] calling percpu_counter_startup+0x0/0x74 @ 1
vm1 | [ 1.637073] initcall percpu_counter_startup+0x0/0x74 returned 0 after 145 usecs
vm1 | [ 1.637089] calling sg_pool_init+0x0/0xf0 @ 1
vm1 | [ 1.637134] initcall sg_pool_init+0x0/0xf0 returned 0 after 31 usecs
vm1 | [ 1.637147] calling simple_pm_bus_driver_init+0x0/0x28 @ 1
vm1 | [ 1.637284] probe of l4vmm returned 0 after 97 usecs
vm1 | [ 1.637464] probe of soc returned 0 after 163 usecs
vm1 | [ 1.637523] probe of soc:siul2@4009c000 returned 0 after 46 usecs
vm1 | [ 1.637576] probe of soc:crypto returned 0 after 42 usecs
vm1 | [ 1.637603] initcall simple_pm_bus_driver_init+0x0/0x28 returned 0 after 436 usecs
vm1 | [ 1.637618] calling vexpress_syscfg_driver_init+0x0/0x28 @ 1
vm1 | [ 1.637648] initcall vexpress_syscfg_driver_init+0x0/0x28 returned 0 after 21 usecs
vm1 | [ 1.637659] calling phy_core_init+0x0/0x70 @ 1
vm1 | [ 1.637684] initcall phy_core_init+0x0/0x70 returned 0 after 16 usecs
vm1 | [ 1.637695] calling serdes_driver_init+0x0/0x28 @ 1
vm1 | [ 1.637727] initcall serdes_driver_init+0x0/0x28 returned 0 after 23 usecs
vm1 | [ 1.637739] calling s32g_pinctrl_driver_init+0x0/0x28 @ 1
vm1 | [ 1.637771] initcall s32g_pinctrl_driver_init+0x0/0x28 returned 0 after 22 usecs
vm1 | [ 1.637781] calling s32r45_pinctrl_driver_init+0x0/0x28 @ 1
vm1 | [ 1.637811] initcall s32r45_pinctrl_driver_init+0x0/0x28 returned 0 after 20 usecs
vm1 | [ 1.637821] calling scmi_pinctrl_driver_init+0x0/0x30 @ 1
vm1 | [ 1.637876] initcall scmi_pinctrl_driver_init+0x0/0x30 returned 0 after 45 usecs
vm1 | [ 1.637885] calling bgpio_driver_init+0x0/0x28 @ 1
vm1 | [ 1.637919] initcall bgpio_driver_init+0x0/0x28 returned 0 after 27 usecs
vm1 | [ 1.637931] calling scmi_gpio_driver_init+0x0/0x30 @ 1
vm1 | [ 1.637963] initcall scmi_gpio_driver_init+0x0/0x30 returned 0 after 23 usecs
vm1 | [ 1.637976] calling siul2_gpio_init+0x0/0x30 @ 1
vm1 | [ 1.638016] initcall siul2_gpio_init+0x0/0x30 returned 0 after 25 usecs
vm1 | [ 1.638028] calling fsl_pwm_driver_init+0x0/0x28 @ 1
vm1 | [ 1.638063] initcall fsl_pwm_driver_init+0x0/0x28 returned 0 after 24 usecs
vm1 | [ 1.638072] calling pcie_portdrv_init+0x0/0x48 @ 1
vm1 | [ 1.638127] initcall pcie_portdrv_init+0x0/0x48 returned 0 after 46 usecs
vm1 | [ 1.638138] calling pci_proc_init+0x0/0x94 @ 1
vm1 | [ 1.638153] initcall pci_proc_init+0x0/0x94 returned 0 after 7 usecs
vm1 | [ 1.638164] calling pci_epc_init+0x0/0x64 @ 1
vm1 | [ 1.638183] initcall pci_epc_init+0x0/0x64 returned 0 after 10 usecs
vm1 | [ 1.638193] calling pci_epf_init+0x0/0x48 @ 1
vm1 | [ 1.638226] initcall pci_epf_init+0x0/0x48 returned 0 after 25 usecs
vm1 | [ 1.638236] calling dw_plat_pcie_driver_init+0x0/0x28 @ 1
vm1 | [ 1.638268] initcall dw_plat_pcie_driver_init+0x0/0x28 returned 0 after 20 usecs
vm1 | [ 1.638279] calling s32cc_pcie_driver_init+0x0/0x2c @ 1
vm1 | [ 1.638311] initcall s32cc_pcie_driver_init+0x0/0x2c returned 0 after 21 usecs
vm1 | [ 1.638324] calling of_fixed_factor_clk_driver_init+0x0/0x28 @ 1
vm1 | [ 1.638358] initcall of_fixed_factor_clk_driver_init+0x0/0x28 returned 0 after 24 usecs
vm1 | [ 1.638369] calling of_fixed_clk_driver_init+0x0/0x28 @ 1
vm1 | [ 1.638401] initcall of_fixed_clk_driver_init+0x0/0x28 returned 0 after 22 usecs
vm1 | [ 1.638411] calling gpio_clk_driver_init+0x0/0x28 @ 1
vm1 | [ 1.638443] initcall gpio_clk_driver_init+0x0/0x28 returned 0 after 21 usecs
vm1 | [ 1.638453] calling vexpress_osc_driver_init+0x0/0x28 @ 1
vm1 | [ 1.638485] initcall vexpress_osc_driver_init+0x0/0x28 returned 0 after 20 usecs
vm1 | [ 1.638496] calling xenbus_probe_initcall+0x0/0xa0 @ 1
vm1 | [ 1.638505] initcall xenbus_probe_initcall+0x0/0xa0 returned 0 after 0 usecs
vm1 | [ 1.638516] calling xenbus_init+0x0/0x58 @ 1
vm1 | [ 1.638526] initcall xenbus_init+0x0/0x58 returned -19 after 1 usecs
vm1 | [ 1.638536] calling xenbus_backend_init+0x0/0x64 @ 1
vm1 | [ 1.638545] initcall xenbus_backend_init+0x0/0x64 returned -19 after 0 usecs
vm1 | [ 1.638555] calling evtchn_init+0x0/0x68 @ 1
vm1 | [ 1.638565] initcall evtchn_init+0x0/0x68 returned -19 after 1 usecs
vm1 | [ 1.638577] calling gntdev_init+0x0/0x70 @ 1
vm1 | [ 1.638585] initcall gntdev_init+0x0/0x70 returned -19 after 0 usecs
vm1 | [ 1.638596] calling xenfs_init+0x0/0x38 @ 1
vm1 | [ 1.638604] initcall xenfs_init+0x0/0x38 returned 0 after 0 usecs
vm1 | [ 1.638615] calling hyper_sysfs_init+0x0/0x128 @ 1
vm1 | [ 1.638623] initcall hyper_sysfs_init+0x0/0x128 returned -19 after 0 usecs
vm1 | [ 1.638632] calling hypervisor_subsys_init+0x0/0x38 @ 1
vm1 | [ 1.638642] initcall hypervisor_subsys_init+0x0/0x38 returned -19 after 0 usecs
vm1 | [ 1.638653] calling privcmd_init+0x0/0x88 @ 1
vm1 | [ 1.638662] initcall privcmd_init+0x0/0x88 returned -19 after 0 usecs
vm1 | [ 1.638672] calling scmi_reset_driver_init+0x0/0x30 @ 1
vm1 | [ 1.638705] initcall scmi_reset_driver_init+0x0/0x30 returned 0 after 22 usecs
vm1 | [ 1.638715] calling n_null_init+0x0/0x2c @ 1
vm1 | [ 1.638725] initcall n_null_init+0x0/0x2c returned 0 after 1 usecs
vm1 | [ 1.638736] calling pty_init+0x0/0x350 @ 1
vm1 | [ 1.639093] initcall pty_init+0x0/0x350 returned 0 after 340 usecs
vm1 | [ 1.639109] calling xen_hvc_init+0x0/0x1f0 @ 1
vm1 | [ 1.639120] initcall xen_hvc_init+0x0/0x1f0 returned -19 after 0 usecs
vm1 | [ 1.639132] calling linflex_serial_init+0x0/0x64 @ 1
vm1 | [ 1.639184] initcall linflex_serial_init+0x0/0x64 returned 0 after 41 usecs
vm1 | [ 1.639196] calling hwrng_modinit+0x0/0x9c @ 1
vm1 | [ 1.639314] initcall hwrng_modinit+0x0/0x9c returned 0 after 106 usecs
vm1 | [ 1.639328] calling smccc_trng_driver_init+0x0/0x28 @ 1
vm1 | [ 1.639360] initcall smccc_trng_driver_init+0x0/0x28 returned 0 after 20 usecs
vm1 | [ 1.639372] calling topology_sysfs_init+0x0/0x40 @ 1
vm1 | [ 1.639503] initcall topology_sysfs_init+0x0/0x40 returned 0 after 118 usecs
vm1 | [ 1.639516] calling cacheinfo_sysfs_init+0x0/0x40 @ 1
vm1 | [ 1.640031] initcall cacheinfo_sysfs_init+0x0/0x40 returned 0 after 493 usecs
vm1 | [ 1.640046] calling xlblk_init+0x0/0x14c @ 1
vm1 | [ 1.640058] initcall xlblk_init+0x0/0x14c returned -19 after 0 usecs
vm1 | [ 1.640069] calling fccu_driver_init+0x0/0x30 @ 1
vm1 | [ 1.640122] initcall fccu_driver_init+0x0/0x30 returned -19 after 41 usecs
vm1 | [ 1.640137] calling vexpress_sysreg_driver_init+0x0/0x28 @ 1
vm1 | [ 1.640173] initcall vexpress_sysreg_driver_init+0x0/0x28 returned 0 after 23 usecs
vm1 | [ 1.640185] calling init_sd+0x0/0x1b4 @ 1
vm1 | [ 1.640252] initcall init_sd+0x0/0x1b4 returned 0 after 55 usecs
vm1 | [ 1.640264] calling nvme_core_init+0x0/0x1b0 @ 1
vm1 | [ 1.640883] initcall nvme_core_init+0x0/0x1b0 returned 0 after 594 usecs
vm1 | [ 1.640898] calling nvme_init+0x0/0x34 @ 1
vm1 | [ 1.640950] initcall nvme_init+0x0/0x34 returned 0 after 40 usecs
vm1 | [ 1.640963] calling nvmet_init+0x0/0x10c @ 1
vm1 | [ 1.641461] initcall nvmet_init+0x0/0x10c returned 0 after 476 usecs
vm1 | [ 1.641477] calling init_mtd+0x0/0x12c @ 1
vm1 | [ 1.641613] initcall init_mtd+0x0/0x12c returned 0 after 122 usecs
vm1 | [ 1.641628] calling ofpart_parser_init+0x0/0x44 @ 1
vm1 | [ 1.641639] initcall ofpart_parser_init+0x0/0x44 returned 0 after 1 usecs
vm1 | [ 1.641651] calling spi_nor_driver_init+0x0/0x28 @ 1
vm1 | [ 1.641684] initcall spi_nor_driver_init+0x0/0x28 returned 0 after 21 usecs
vm1 | [ 1.641697] calling spidev_init+0x0/0xd0 @ 1
vm1 | [ 1.641742] initcall spidev_init+0x0/0xd0 returned 0 after 32 usecs
vm1 | [ 1.641754] calling fsl_dspi_driver_init+0x0/0x28 @ 1
vm1 | [ 1.641806] initcall fsl_dspi_driver_init+0x0/0x28 returned 0 after 42 usecs
vm1 | [ 1.641818] calling fsl_qspi_driver_init+0x0/0x28 @ 1
vm1 | [ 1.641862] initcall fsl_qspi_driver_init+0x0/0x28 returned 0 after 31 usecs
vm1 | [ 1.641874] calling spi_slave_time_driver_init+0x0/0x28 @ 1
vm1 | [ 1.641900] initcall spi_slave_time_driver_init+0x0/0x28 returned 0 after 15 usecs
vm1 | [ 1.641914] calling spi_slave_system_control_driver_init+0x0/0x28 @ 1
vm1 | [ 1.641941] initcall spi_slave_system_control_driver_init+0x0/0x28 returned 0 after 14 usecs
vm1 | [ 1.641955] calling blackhole_netdev_init+0x0/0x94 @ 1
vm1 | [ 1.641988] initcall blackhole_netdev_init+0x0/0x94 returned 0 after 22 usecs
vm1 | [ 1.642001] calling phy_module_init+0x0/0x2c @ 1
vm1 | [ 1.642157] initcall phy_module_init+0x0/0x2c returned 0 after 143 usecs
vm1 | [ 1.642168] calling fixed_mdio_bus_init+0x0/0x118 @ 1
vm1 | [ 1.642569] initcall fixed_mdio_bus_init+0x0/0x118 returned 0 after 381 usecs
vm1 | [ 1.642583] calling phy_module_init+0x0/0x2c @ 1
vm1 | [ 1.642757] initcall phy_module_init+0x0/0x2c returned 0 after 159 usecs
vm1 | [ 1.642768] calling phy_module_init+0x0/0x2c @ 1
vm1 | [ 1.643051] initcall phy_module_init+0x0/0x2c returned 0 after 267 usecs
vm1 | [ 1.643064] calling phy_module_init+0x0/0x2c @ 1
vm1 | [ 1.643159] initcall phy_module_init+0x0/0x2c returned 0 after 82 usecs
vm1 | [ 1.643172] calling vcan_init_module+0x0/0x48 @ 1
vm1 | [ 1.643181] vcan: Virtual CAN interface driver
vm1 | [ 1.643186] initcall vcan_init_module+0x0/0x48 returned 0 after 5 usecs
vm1 | [ 1.643198] calling slcan_init+0x0/0xbc @ 1
vm1 | [ 1.643209] slcan: serial line CAN interface driver
vm1 | [ 1.643212] slcan: 10 dynamic interface channels.
vm1 | [ 1.643216] initcall slcan_init+0x0/0xbc returned 0 after 8 usecs
vm1 | [ 1.643229] calling can_dev_init+0x0/0x3c @ 1
vm1 | [ 1.643241] CAN device driver interface
vm1 | [ 1.643244] initcall can_dev_init+0x0/0x3c returned 0 after 3 usecs
vm1 | [ 1.643255] calling flexcan_driver_init+0x0/0x28 @ 1
vm1 | [ 1.643307] initcall flexcan_driver_init+0x0/0x28 returned 0 after 40 usecs
vm1 | [ 1.643319] calling sja1105_driver_init+0x0/0x28 @ 1
vm1 | [ 1.643351] initcall sja1105_driver_init+0x0/0x28 returned 0 after 21 usecs
vm1 | [ 1.643365] calling e100_init_module+0x0/0x74 @ 1
vm1 | [ 1.643377] e100: Intel(R) PRO/100 Network Driver
vm1 | [ 1.643380] e100: Copyright(c) 1999-2006 Intel Corporation
vm1 | [ 1.643417] initcall e100_init_module+0x0/0x74 returned 0 after 40 usecs
vm1 | [ 1.643429] calling e1000_init_module+0x0/0x9c @ 1
vm1 | [ 1.643439] e1000: Intel(R) PRO/1000 Network Driver
vm1 | [ 1.643444] e1000: Copyright (c) 1999-2006 Intel Corporation.
vm1 | [ 1.643482] initcall e1000_init_module+0x0/0x9c returned 0 after 41 usecs
vm1 | [ 1.643493] calling e1000_init_module+0x0/0x48 @ 1
vm1 | [ 1.643504] e1000e: Intel(R) PRO/1000 Network Driver
vm1 | [ 1.643507] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
vm1 | [ 1.643537] initcall e1000_init_module+0x0/0x48 returned 0 after 32 usecs
vm1 | [ 1.643550] calling igb_init_module+0x0/0x60 @ 1
vm1 | [ 1.643561] igb: Intel(R) Gigabit Ethernet Network Driver
vm1 | [ 1.643566] igb: Copyright (c) 2007-2014 Intel Corporation.
vm1 | [ 1.643590] initcall igb_init_module+0x0/0x60 returned 0 after 28 usecs
vm1 | [ 1.643602] calling stmmac_init+0x0/0x58 @ 1
vm1 | [ 1.643630] initcall stmmac_init+0x0/0x58 returned 0 after 17 usecs
vm1 | [ 1.643643] calling dwc_eth_dwmac_driver_init+0x0/0x28 @ 1
vm1 | [ 1.643681] initcall dwc_eth_dwmac_driver_init+0x0/0x28 returned 0 after 26 usecs
vm1 | [ 1.643696] calling s32cc_dwmac_driver_init+0x0/0x28 @ 1
vm1 | [ 1.643731] initcall s32cc_dwmac_driver_init+0x0/0x28 returned 0 after 23 usecs
vm1 | [ 1.643745] calling dwmac_generic_driver_init+0x0/0x28 @ 1
vm1 | [ 1.643793] initcall dwmac_generic_driver_init+0x0/0x28 returned 0 after 36 usecs
vm1 | [ 1.643805] calling netif_init+0x0/0x74 @ 1
vm1 | [ 1.643817] initcall netif_init+0x0/0x74 returned -19 after 1 usecs
vm1 | [ 1.643828] calling uio_init+0x0/0x128 @ 1
vm1 | [ 1.643853] initcall uio_init+0x0/0x128 returned 0 after 15 usecs
vm1 | [ 1.643865] calling hse_uio_driver_init+0x0/0x28 @ 1
vm1 | [ 1.643903] initcall hse_uio_driver_init+0x0/0x28 returned 0 after 25 usecs
vm1 | [ 1.643914] calling mon_init+0x0/0x144 @ 1
vm1 | [ 1.644096] initcall mon_init+0x0/0x144 returned 0 after 166 usecs
vm1 | [ 1.644109] calling ehci_hcd_init+0x0/0xd0 @ 1
vm1 | [ 1.644120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
vm1 | [ 1.644125] initcall ehci_hcd_init+0x0/0xd0 returned 0 after 5 usecs
vm1 | [ 1.644139] calling ehci_pci_init+0x0/0x88 @ 1
vm1 | [ 1.644150] ehci-pci: EHCI PCI platform driver
vm1 | [ 1.644179] initcall ehci_pci_init+0x0/0x88 returned 0 after 28 usecs
vm1 | [ 1.644192] calling uas_init+0x0/0x70 @ 1
vm1 | [ 1.644400] usbcore: registered new interface driver uas
vm1 | [ 1.644405] initcall uas_init+0x0/0x70 returned 0 after 198 usecs
vm1 | [ 1.644417] calling usb_storage_driver_init+0x0/0x4c @ 1
vm1 | [ 1.644464] usbcore: registered new interface driver usb-storage
vm1 | [ 1.644469] initcall usb_storage_driver_init+0x0/0x4c returned 0 after 39 usecs
vm1 | [ 1.644482] calling ci_hdrc_platform_register+0x0/0x30 @ 1
vm1 | [ 1.644516] initcall ci_hdrc_platform_register+0x0/0x30 returned 0 after 21 usecs
vm1 | [ 1.644529] calling ci_hdrc_usb2_driver_init+0x0/0x28 @ 1
vm1 | [ 1.644567] initcall ci_hdrc_usb2_driver_init+0x0/0x28 returned 0 after 26 usecs
vm1 | [ 1.644581] calling ci_hdrc_msm_driver_init+0x0/0x28 @ 1
vm1 | [ 1.644614] initcall ci_hdrc_msm_driver_init+0x0/0x28 returned 0 after 21 usecs
vm1 | [ 1.644629] calling ci_hdrc_pci_driver_init+0x0/0x30 @ 1
vm1 | [ 1.644667] initcall ci_hdrc_pci_driver_init+0x0/0x30 returned 0 after 23 usecs
vm1 | [ 1.644681] calling ci_hdrc_imx_driver_init+0x0/0x28 @ 1
vm1 | [ 1.644727] initcall ci_hdrc_imx_driver_init+0x0/0x28 returned 0 after 33 usecs
vm1 | [ 1.644740] calling usbmisc_imx_driver_init+0x0/0x28 @ 1
vm1 | [ 1.644789] initcall usbmisc_imx_driver_init+0x0/0x28 returned 0 after 37 usecs
vm1 | [ 1.644803] calling tegra_usb_driver_init+0x0/0x28 @ 1
vm1 | [ 1.644846] initcall tegra_usb_driver_init+0x0/0x28 returned 0 after 31 usecs
vm1 | [ 1.644858] calling gadget_cfs_init+0x0/0x38 @ 1
vm1 | [ 1.644887] initcall gadget_cfs_init+0x0/0x38 returned 0 after 19 usecs
vm1 | [ 1.644901] calling mass_storagemod_init+0x0/0x28 @ 1
vm1 | [ 1.644915] initcall mass_storagemod_init+0x0/0x28 returned 0 after 2 usecs
vm1 | [ 1.644928] calling serport_init+0x0/0x44 @ 1
vm1 | [ 1.644941] initcall serport_init+0x0/0x44 returned 0 after 2 usecs
vm1 | [ 1.644953] calling ambakmi_driver_init+0x0/0x24 @ 1
vm1 | [ 1.644985] initcall ambakmi_driver_init+0x0/0x24 returned 0 after 20 usecs
vm1 | [ 1.644999] calling evdev_init+0x0/0x24 @ 1
vm1 | [ 1.645015] initcall evdev_init+0x0/0x24 returned 0 after 4 usecs
vm1 | [ 1.645027] calling atkbd_init+0x0/0x34 @ 1
vm1 | [ 1.645097] initcall atkbd_init+0x0/0x34 returned 0 after 57 usecs
vm1 | [ 1.645112] calling uinput_misc_init+0x0/0x24 @ 1
vm1 | [ 1.645235] initcall uinput_misc_init+0x0/0x24 returned 0 after 108 usecs
vm1 | [ 1.645253] calling xenkbd_init+0x0/0x50 @ 1
vm1 | [ 1.645265] initcall xenkbd_init+0x0/0x50 returned -19 after 1 usecs
vm1 | [ 1.645277] calling pcf85063_driver_init+0x0/0x28 @ 1
vm1 | [ 1.645315] initcall pcf85063_driver_init+0x0/0x28 returned 0 after 26 usecs
vm1 | [ 1.645328] calling s32cc_rtc_driver_init+0x0/0x28 @ 1
vm1 | [ 1.645366] initcall s32cc_rtc_driver_init+0x0/0x28 returned 0 after 26 usecs
vm1 | [ 1.645379] calling i2c_dev_init+0x0/0xdc @ 1
vm1 | [ 1.645390] i2c_dev: i2c /dev entries driver
vm1 | [ 1.645407] initcall i2c_dev_init+0x0/0xdc returned 0 after 18 usecs
vm1 | [ 1.645420] calling ptp_kvm_init+0x0/0xd4 @ 1
vm1 | [ 1.645434] initcall ptp_kvm_init+0x0/0xd4 returned -95 after 2 usecs
vm1 | [ 1.645446] calling ina2xx_driver_init+0x0/0x28 @ 1
vm1 | [ 1.645470] initcall ina2xx_driver_init+0x0/0x28 returned 0 after 14 usecs
vm1 | [ 1.645479] calling qoriq_tmu_init+0x0/0x28 @ 1
vm1 | [ 1.645518] initcall qoriq_tmu_init+0x0/0x28 returned 0 after 29 usecs
vm1 | [ 1.645528] calling s32cc_wdt_driver_init+0x0/0x30 @ 1
vm1 | [ 1.645576] initcall s32cc_wdt_driver_init+0x0/0x30 returned -19 after 38 usecs
vm1 | [ 1.645589] calling mmc_pwrseq_simple_driver_init+0x0/0x28 @ 1
vm1 | [ 1.645623] initcall mmc_pwrseq_simple_driver_init+0x0/0x28 returned 0 after 23 usecs
vm1 | [ 1.645635] calling mmc_pwrseq_emmc_driver_init+0x0/0x28 @ 1
vm1 | [ 1.645667] initcall mmc_pwrseq_emmc_driver_init+0x0/0x28 returned 0 after 22 usecs
vm1 | [ 1.645678] calling mmc_blk_init+0x0/0x118 @ 1
vm1 | [ 1.645733] initcall mmc_blk_init+0x0/0x118 returned 0 after 46 usecs
vm1 | [ 1.645743] calling sdhci_drv_init+0x0/0x34 @ 1
vm1 | [ 1.645750] sdhci: Secure Digital Host Controller Interface driver
vm1 | [ 1.645753] sdhci: Copyright(c) Pierre Ossman
vm1 | [ 1.645755] initcall sdhci_drv_init+0x0/0x34 returned 0 after 4 usecs
vm1 | [ 1.645766] calling sdhci_pltfm_drv_init+0x0/0x28 @ 1
vm1 | [ 1.645773] sdhci-pltfm: SDHCI platform and OF driver helper
vm1 | [ 1.645777] initcall sdhci_pltfm_drv_init+0x0/0x28 returned 0 after 3 usecs
vm1 | [ 1.645787] calling sdhci_esdhc_imx_driver_init+0x0/0x28 @ 1
vm1 | [ 1.645838] initcall sdhci_esdhc_imx_driver_init+0x0/0x28 returned 0 after 40 usecs
vm1 | [ 1.645848] calling smccc_devices_init+0x0/0x9c @ 1
vm1 | [ 1.645857] initcall smccc_devices_init+0x0/0x9c returned 0 after 0 usecs
vm1 | [ 1.645866] calling smccc_soc_init+0x0/0x2a0 @ 1
vm1 | [ 1.645877] initcall smccc_soc_init+0x0/0x2a0 returned 0 after 2 usecs
vm1 | [ 1.645888] calling hse_driver_init+0x0/0x28 @ 1
vm1 | [ 1.645922] initcall hse_driver_init+0x0/0x28 returned 0 after 24 usecs
vm1 | [ 1.645931] calling global_time_driver_init+0x0/0x28 @ 1
vm1 | [ 1.645967] initcall global_time_driver_init+0x0/0x28 returned 0 after 25 usecs
vm1 | [ 1.645978] calling hid_init+0x0/0x64 @ 1
vm1 | [ 1.646016] initcall hid_init+0x0/0x64 returned 0 after 29 usecs
vm1 | [ 1.646025] calling hid_generic_init+0x0/0x30 @ 1
vm1 | [ 1.646057] initcall hid_generic_init+0x0/0x30 returned 0 after 23 usecs
vm1 | [ 1.646069] calling hid_init+0x0/0x78 @ 1
vm1 | [ 1.646114] usbcore: registered new interface driver usbhid
vm1 | [ 1.646118] usbhid: USB HID core driver
vm1 | [ 1.646120] initcall hid_init+0x0/0x78 returned 0 after 42 usecs
vm1 | [ 1.646132] calling extcon_class_init+0x0/0x6c @ 1
vm1 | [ 1.646154] initcall extcon_class_init+0x0/0x6c returned 0 after 12 usecs
vm1 | [ 1.646165] calling s32cc_adc_driver_init+0x0/0x28 @ 1
vm1 | [ 1.646200] initcall s32cc_adc_driver_init+0x0/0x28 returned 0 after 23 usecs
vm1 | [ 1.646211] calling iio_sysfs_trig_init+0x0/0x5c @ 1
vm1 | [ 1.646261] initcall iio_sysfs_trig_init+0x0/0x5c returned 0 after 39 usecs
vm1 | [ 1.646276] calling s32cc_ddr_perf_driver_init+0x0/0x28 @ 1
vm1 | [ 1.646310] initcall s32cc_ddr_perf_driver_init+0x0/0x28 returned 0 after 23 usecs
vm1 | [ 1.646320] calling s32cc_ocotp_driver_init+0x0/0x28 @ 1
vm1 | [ 1.646355] initcall s32cc_ocotp_driver_init+0x0/0x28 returned 0 after 24 usecs
vm1 | [ 1.646368] calling s32cc_siul2_nvmem_driver_init+0x0/0x28 @ 1
vm1 | [ 1.646407] initcall s32cc_siul2_nvmem_driver_init+0x0/0x28 returned 0 after 28 usecs
vm1 | [ 1.646418] calling scmi_nvmem_driver_init+0x0/0x30 @ 1
vm1 | [ 1.646462] initcall scmi_nvmem_driver_init+0x0/0x30 returned 0 after 32 usecs
vm1 | [ 1.646472] calling mux_mmio_driver_init+0x0/0x28 @ 1
vm1 | [ 1.646509] initcall mux_mmio_driver_init+0x0/0x28 returned 0 after 26 usecs
vm1 | [ 1.646519] calling s32cc_ddr_errata_driver_init+0x0/0x28 @ 1
vm1 | [ 1.646552] initcall s32cc_ddr_errata_driver_init+0x0/0x28 returned 0 after 22 usecs
vm1 | [ 1.646563] calling sock_diag_init+0x0/0x4c @ 1
vm1 | [ 1.646615] initcall sock_diag_init+0x0/0x4c returned 0 after 40 usecs
vm1 | [ 1.646628] calling llc_init+0x0/0x3c @ 1
vm1 | [ 1.646642] initcall llc_init+0x0/0x3c returned 0 after 3 usecs
vm1 | [ 1.646654] calling snap_init+0x0/0x4c @ 1
vm1 | [ 1.646669] initcall snap_init+0x0/0x4c returned 0 after 5 usecs
vm1 | [ 1.646680] calling gre_offload_init+0x0/0x60 @ 1
vm1 | [ 1.646693] initcall gre_offload_init+0x0/0x60 returned 0 after 1 usecs
vm1 | [ 1.646704] calling sysctl_ipv4_init+0x0/0x68 @ 1
vm1 | [ 1.646818] initcall sysctl_ipv4_init+0x0/0x68 returned 0 after 102 usecs
vm1 | [ 1.646830] calling tunnel4_init+0x0/0x6c @ 1
vm1 | [ 1.646841] initcall tunnel4_init+0x0/0x6c returned 0 after 1 usecs
vm1 | [ 1.646853] calling inet_diag_init+0x0/0xa0 @ 1
vm1 | [ 1.646870] initcall inet_diag_init+0x0/0xa0 returned 0 after 5 usecs
vm1 | [ 1.646882] calling tcp_diag_init+0x0/0x24 @ 1
vm1 | [ 1.646894] initcall tcp_diag_init+0x0/0x24 returned 0 after 0 usecs
vm1 | [ 1.646906] calling cubictcp_register+0x0/0x68 @ 1
vm1 | [ 1.646919] initcall cubictcp_register+0x0/0x68 returned 0 after 2 usecs
vm1 | [ 1.646931] calling inet6_init+0x0/0x36c @ 1
vm1 | [ 1.647031] NET: Registered PF_INET6 protocol family
vm1 | [ 1.647938] Segment Routing with IPv6
vm1 | [ 1.647976] In-situ OAM (IOAM) with IPv6
vm1 | [ 1.648025] initcall inet6_init+0x0/0x36c returned 0 after 1059 usecs
vm1 | [ 1.648043] calling sit_init+0x0/0xec @ 1
vm1 | [ 1.648056] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
vm1 | [ 1.648529] initcall sit_init+0x0/0xec returned 0 after 461 usecs
vm1 | [ 1.648545] calling packet_init+0x0/0x9c @ 1
vm1 | [ 1.648560] NET: Registered PF_PACKET protocol family
vm1 | [ 1.648570] initcall packet_init+0x0/0x9c returned 0 after 12 usecs
vm1 | [ 1.648584] calling br_init+0x0/0xf4 @ 1
vm1 | [ 1.648614] initcall br_init+0x0/0xf4 returned 0 after 19 usecs
vm1 | [ 1.648625] calling dsa_init_module+0x0/0xb4 @ 1
vm1 | [ 1.648807] initcall dsa_init_module+0x0/0xb4 returned 0 after 165 usecs
vm1 | [ 1.648822] calling dsa_tag_driver_module_init+0x0/0x30 @ 1
vm1 | [ 1.648836] initcall dsa_tag_driver_module_init+0x0/0x30 returned 0 after 1 usecs
vm1 | [ 1.648849] calling can_init+0x0/0xbc @ 1
vm1 | [ 1.648859] can: controller area network core
vm1 | [ 1.648893] NET: Registered PF_CAN protocol family
vm1 | [ 1.648897] initcall can_init+0x0/0xbc returned 0 after 37 usecs
vm1 | [ 1.648910] calling raw_module_init+0x0/0x60 @ 1
vm1 | [ 1.648922] can: raw protocol
vm1 | [ 1.648927] initcall raw_module_init+0x0/0x60 returned 0 after 5 usecs
vm1 | [ 1.648939] calling bcm_module_init+0x0/0x74 @ 1
vm1 | [ 1.648952] can: broadcast manager protocol
vm1 | [ 1.648978] initcall bcm_module_init+0x0/0x74 returned 0 after 26 usecs
vm1 | [ 1.648992] calling cgw_module_init+0x0/0x16c @ 1
vm1 | [ 1.649004] can: netlink gateway - max_hops=1
vm1 | [ 1.649034] initcall cgw_module_init+0x0/0x16c returned 0 after 31 usecs
vm1 | [ 1.649048] calling vlan_proto_init+0x0/0xa8 @ 1
vm1 | [ 1.649062] 8021q: 802.1Q VLAN Support v1.8
vm1 | [ 1.649079] initcall vlan_proto_init+0x0/0xa8 returned 0 after 17 usecs
vm1 | [ 1.649158] calling xen_pm_init+0x0/0x100 @ 1
vm1 | [ 1.649170] initcall xen_pm_init+0x0/0x100 returned -19 after 0 usecs
vm1 | [ 1.649181] calling kernel_panic_sysctls_init+0x0/0x38 @ 1
vm1 | [ 1.649206] initcall kernel_panic_sysctls_init+0x0/0x38 returned 0 after 15 usecs
vm1 | [ 1.649215] calling kernel_panic_sysfs_init+0x0/0x38 @ 1
vm1 | [ 1.649231] initcall kernel_panic_sysfs_init+0x0/0x38 returned 0 after 7 usecs
vm1 | [ 1.649243] calling init_oops_id+0x0/0x60 @ 1
vm1 | [ 1.649265] initcall init_oops_id+0x0/0x60 returned 0 after 10 usecs
vm1 | [ 1.649276] calling kernel_exit_sysctls_init+0x0/0x38 @ 1
vm1 | [ 1.649291] initcall kernel_exit_sysctls_init+0x0/0x38 returned 0 after 5 usecs
vm1 | [ 1.649302] calling kernel_exit_sysfs_init+0x0/0x38 @ 1
vm1 | [ 1.649315] initcall kernel_exit_sysfs_init+0x0/0x38 returned 0 after 4 usecs
vm1 | [ 1.649325] calling reboot_ksysfs_init+0x0/0x64 @ 1
vm1 | [ 1.649344] initcall reboot_ksysfs_init+0x0/0x64 returned 0 after 9 usecs
vm1 | [ 1.649355] calling pm_debugfs_init+0x0/0x3c @ 1
vm1 | [ 1.649391] initcall pm_debugfs_init+0x0/0x3c returned 0 after 25 usecs
vm1 | [ 1.649403] calling printk_late_init+0x0/0x16c @ 1
vm1 | [ 1.649535] printk: console [ttyAMA0]: printing thread started
vm1 | [ 1.649547] initcall printk_late_init+0x0/0x16c returned 0 after 133 usecs
vm1 | [ 1.649558] calling init_srcu_module_notifier+0x0/0x48 @ 1
vm1 | [ 1.649569] initcall init_srcu_module_notifier+0x0/0x48 returned 0 after 1 usecs
vm1 | [ 1.649578] calling swiotlb_create_default_debugfs+0x0/0x78 @ 1
vm1 | [ 1.649610] initcall swiotlb_create_default_debugfs+0x0/0x78 returned 0 after 21 usecs
vm1 | [ 1.649639] calling tk_debug_sleep_time_init+0x0/0x3c @ 1
vm1 | [ 1.649696] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 12 usecs
vm1 | [ 1.649722] calling bpf_map_iter_init+0x0/0x38 @ 1
vm1 | [ 1.649748] initcall bpf_map_iter_init+0x0/0x38 returned 0 after 2 usecs
vm1 | [ 1.649773] calling task_iter_init+0x0/0x6c @ 1
vm1 | [ 1.649799] initcall task_iter_init+0x0/0x6c returned 0 after 1 usecs
vm1 | [ 1.649824] calling bpf_prog_iter_init+0x0/0x28 @ 1
vm1 | [ 1.649848] initcall bpf_prog_iter_init+0x0/0x28 returned 0 after 0 usecs
vm1 | [ 1.649874] calling init_trampolines+0x0/0x30 @ 1
vm1 | [ 1.649900] initcall init_trampolines+0x0/0x30 returned 0 after 1 usecs
vm1 | [ 1.649927] calling fault_around_debugfs+0x0/0x3c @ 1
vm1 | [ 1.649974] initcall fault_around_debugfs+0x0/0x3c returned 0 after 13 usecs
vm1 | [ 1.650000] calling migrate_on_reclaim_init+0x0/0x74 @ 1
vm1 | [ 1.688902] initcall migrate_on_reclaim_init+0x0/0x74 returned 0 after 37966 usecs
vm1 | [ 1.688916] calling check_early_ioremap_leak+0x0/0x64 @ 1
vm1 | [ 1.688928] initcall check_early_ioremap_leak+0x0/0x64 returned 0 after 1 usecs
vm1 | [ 1.688940] calling cma_debugfs_init+0x0/0x1e4 @ 1
vm1 | [ 1.689004] initcall cma_debugfs_init+0x0/0x1e4 returned 0 after 53 usecs
vm1 | [ 1.689014] calling blk_timeout_init+0x0/0x1c @ 1
vm1 | [ 1.689027] initcall blk_timeout_init+0x0/0x1c returned 0 after 0 usecs
vm1 | [ 1.689039] calling prandom_init_late+0x0/0x4c @ 1
vm1 | [ 1.689053] initcall prandom_init_late+0x0/0x4c returned 0 after 1 usecs
vm1 | [ 1.689065] calling pci_resource_alignment_sysfs_init+0x0/0x2c @ 1
vm1 | [ 1.689084] initcall pci_resource_alignment_sysfs_init+0x0/0x2c returned 0 after 8 usecs
vm1 | [ 1.689095] calling pci_sysfs_init+0x0/0x94 @ 1
vm1 | [ 1.689112] initcall pci_sysfs_init+0x0/0x94 returned 0 after 7 usecs
vm1 | [ 1.689125] calling amba_deferred_retry+0x0/0xac @ 1
vm1 | [ 1.689142] initcall amba_deferred_retry+0x0/0xac returned 0 after 1 usecs
vm1 | [ 1.689153] calling clk_debug_init+0x0/0x124 @ 1
vm1 | [ 1.689356] initcall clk_debug_init+0x0/0x124 returned 0 after 189 usecs
vm1 | [ 1.689366] calling setup_vcpu_hotplug_event+0x0/0x3c @ 1
vm1 | [ 1.689376] initcall setup_vcpu_hotplug_event+0x0/0x3c returned -19 after 2 usecs
vm1 | [ 1.689388] calling boot_wait_for_devices+0x0/0x30 @ 1
vm1 | [ 1.689399] initcall boot_wait_for_devices+0x0/0x30 returned 0 after 0 usecs
vm1 | [ 1.689409] calling sync_state_resume_initcall+0x0/0x20 @ 1
vm1 | [ 1.689425] initcall sync_state_resume_initcall+0x0/0x20 returned 0 after 2 usecs
vm1 | [ 1.689438] calling deferred_probe_initcall+0x0/0xb4 @ 1
vm1 | [ 1.689600] initcall deferred_probe_initcall+0x0/0xb4 returned 0 after 147 usecs
vm1 | [ 1.689613] calling genpd_power_off_unused+0x0/0x98 @ 1
vm1 | [ 1.689624] initcall genpd_power_off_unused+0x0/0x98 returned 0 after 1 usecs
vm1 | [ 1.689636] calling genpd_debug_init+0x0/0x90 @ 1
vm1 | [ 1.689657] initcall genpd_debug_init+0x0/0x90 returned 0 after 11 usecs
vm1 | [ 1.689671] calling of_fdt_raw_init+0x0/0x88 @ 1
vm1 | [ 1.689853] initcall of_fdt_raw_init+0x0/0x88 returned 0 after 169 usecs
vm1 | [ 1.689864] calling bpf_sockmap_iter_init+0x0/0x30 @ 1
vm1 | [ 1.689876] initcall bpf_sockmap_iter_init+0x0/0x30 returned 0 after 2 usecs
vm1 | [ 1.689888] calling bpf_sk_storage_map_iter_init+0x0/0x30 @ 1
vm1 | [ 1.689899] initcall bpf_sk_storage_map_iter_init+0x0/0x30 returned 0 after 0 usecs
vm1 | [ 1.689911] calling tcp_congestion_default+0x0/0x2c @ 1
vm1 | [ 1.689925] initcall tcp_congestion_default+0x0/0x2c returned 0 after 3 usecs
vm1 | [ 1.689936] calling ip_auto_config+0x0/0xe78 @ 1
vm1 | [ 1.689968] initcall ip_auto_config+0x0/0xe78 returned 0 after 22 usecs
vm1 | [ 1.689983] calling tcp_bpf_v4_build_proto+0x0/0xdc @ 1
vm1 | [ 1.689997] initcall tcp_bpf_v4_build_proto+0x0/0xdc returned 0 after 4 usecs
vm1 | [ 1.690008] calling udp_bpf_v4_build_proto+0x0/0x68 @ 1
vm1 | [ 1.690021] initcall udp_bpf_v4_build_proto+0x0/0x68 returned 0 after 2 usecs
vm1 | [ 1.690035] calling clk_disable_unused+0x0/0xe0 @ 1
vm1 | [ 1.690049] initcall clk_disable_unused+0x0/0xe0 returned 0 after 6 usecs
vm1 | [ 1.690061] calling balloon_wait_finish+0x0/0x128 @ 1
vm1 | [ 1.690071] initcall balloon_wait_finish+0x0/0x128 returned -19 after 2 usecs
vm1 | [ 1.690081] calling of_platform_sync_state_init+0x0/0x20 @ 1
vm1 | [ 1.690091] initcall of_platform_sync_state_init+0x0/0x20 returned 0 after 0 usecs
vm1 | [ 1.715893] uart-pl011 12000.pl011_uart: no DMA platform data
vm1 | [ 1.794241] Freeing unused kernel memory: 1344K