Re: Porblem with building and running pistachio on x-86

Jens Kehne <[email protected]> Tue, 17 Jan 2012 20:11:38 +0100
Newsgroups gmane.comp.micro-kernel.l4.l4ka.general
Message-ID <[email protected]>
Hi Rukshan,

have you tried using a serial console instead of qemu's native one? You
can activate the serial console by passing "-serial stdio" to qemu.
Also, keep in mind that both Pistachio's kernel and userland need to be
compiled with serial console support for that to work.

Hope this helps

Jens

Am 17.01.2012 08:36, schrieb rukshan rajapaksha:
> Hi,
> i`m interest about pistachio microkernel and i tried it with my ubuntu
> 11.04.i could build the floppy disk image and i run it with qemu emulat=
or.
> after i run it with
>=20
> qemu -nographic -fda fdimage.img
>=20
> it give this out put
>=20
>  <0x800000:0x7a1d:0x0>, shtab=3D0x808258   [Multiboot-module @ 0x819000=
,
> 0x536a8
>  bytes]
>    [Multiboot-module @ 0x86d000, 0x1b0eb bytes]
>    [Multiboot-module @ 0x889000, 0x1dde5 bytes]
> Starting up ...
> KickStart 0.13.06
> Detected multiboot compliant loader
>  kernel    (0x00819000-0x0086c6a8)   =3D> 0x0016a050
>   (0x00819000-0x0082f025) -> 0x00100000-0x00116025
>   (0x00830000-0x00830028) -> 0x00117000-0x00117028
>   (0x00831000-0x0083fd9e) -> 0x00118000-0x00126d9e
>   (0x00840000-0x0085f368) -> 0x00127000-0x00146368
>   (0x00860000-0x00863b38) -> 0x00167000-0x0016ab38
>  sigma0    (0x0086d000-0x008880eb)   =3D> 0x00020000
>   (0x0086e000-0x00877524) -> 0x00020000-0x00029524
>  roottask  (0x00889000-0x008a6de5)   =3D> 0x00400000
>   (0x0088a000-0x0089a010) -> 0x00400000-0x00410010
> Launching kernel ...
>=20
> L4Ka::Pistachio - built on Jan 17 2012 12:30:48 by root@rukshan using
> gcc version 4.5.2
> --- "KD# System started (press 'g' to continue)" ---
> --------------------------------- (eip=3D00167de1, esp=3Df010e7e0) ---
>> go
> Pingpong started c8001
>=20
> Please select ipc type:
>=20
> 1: INTER-AS
> 2: INTRA-AS (IPC)
> 3: INTRA-AS (LIPC)
> 4: XCPU
> 5: INTER-AS (small)
> s: print SQLite table
> _______________________________________________________________________=
______________
>=20
>=20
> but i cant select any ipc type.it <http://type.it> getting stuck.im
> <http://stuck.im> in a real problem with my project in this
> situation.please somebody=20
> help me.
>=20
> thankyou.
>=20
> --=20
> Rukshan Rajapaksha
> undergraduate,
> Faculty of engineering,
> University of Peradeniya,
> Srilanka.
>=20