Re: [mh] MH5.1 + The Future
H Plato <[email protected]>
| Newsgroups | gmane.comp.misc.misterhouse.user |
|---|---|
| Message-ID | <[email protected]> |
I’m not sure. I tagged my github as 5.1 so I see that on my setup, but not sure if Hollie master has those same tags. Since the IA7 version is replace_current_ia7_version, that means the browser doesn’t have the latest javascript file.. I’ve found on my iphone that the webapp sometimes caches the javascript files. On the PC, note what version you see, and then on the iphone try deleting the cached files, close the app and try reopening it. The HTML file has the spinner in it, and the old javascript code doesn’t have the function to remove the spinner upon successful collection display. > On Oct 31, 2018, at 3:33 PM, David Worenklein (@work) <[email protected]> wrote: > > I was on the master branch. I switched to the stable branch and the problem went away. > > Is this the right branch to be testing? Should it be tagged 5.1 instead? > > <image.png> > > > On Wed, Oct 31, 2018 at 5:24 AM Tony Yates <[email protected] <mailto:[email protected]>> wrote: > Hi, > > I've been using a small home grown module with RaZberry, which pre-dated the native MH support and only performs dumb state switching for lights/security lights and kit in the shed. I will add migrating to the native module to my list of update tasks when I merge in to the current master, thanks for the nudge! > > The zoneminder info is really welcome as well and I will also want to look at that. > > Regards, > > Tony.. > > Quoting H Plato <[email protected] <mailto:[email protected]>>: > >> Thanks Tony, >> >> >> Iâ??m curious what you added to raZberry. FYI - the latest version has push support, so rather than polling, MH is instantly updated when a zwave event changes. Iâ??m using this with that new homeseer Floodlight motion sensor replacement. Itâ??s nice to have a hardwired outdoor motion sensor, and to control when the flood light goes on. >> >> In either 5.0 or 5.1, Tobias added in a zoneminder module to IA7. As soon as motion is detected a live camera feed pop-up happens. I have a camera in the garage, and itâ??s nice to have the video pop up when Iâ??m working on something else. >> > >>> On Oct 30, 2018, at 6:53 AM, Tony Yates <[email protected] <mailto:[email protected]>> wrote: >>> > >>> I'm another long term, 15+ years, happy user and have significant investment in MH user code as the core of our HA here. >>> >>> Still running node0 on a Linux based PC house server, along with Asterisk, Exim, Zoneminder, one wire weather, mrtg, etc.. Still using a lot of X10 wireless devices - motion, window/door sensors with receivers on raspberry pi's and communicating with xpl. >>> >>> Most X10 mains stuff migrated to ZWave with, curently, a VeraPlus in the house and RaZberry in a remote shed. >>> >>> A mixture of O2 Jogglers running xubuntu and pi's running raspbian, as MH proxies, mostly for announcements. Recently implemented an Insteon home hub (NB we are in the UK), mostly out of interest but it did revive the mains X10 Chimes! Last CM12 died a couple of years ago. >>> >>> Have hacked odd bits of MH, but not to pull request standards - a fix for get_earthquakes a few years ago and one way modules for Vera and RaZberry. Currently experimenting with ZWave motion/door sensors using LUA on Vera to communicate state to MH. >>> >>> I echo the thanks of others to all the active MH contributors over the years. I will try to merge the latest master to my running code if I ever get to take a couple of days off! >>> >>> I too might be able to do more when (if?) I retire. >>> >>> Regards, >>> >>> Tony.. >>> >>> Quoting Paul Voyer <[email protected] <mailto:[email protected]>>: >>> > >>>> Same for me! >>>> >>>> It is about 8 years now that I am running mh on raspberry pi without hiccup... >>>> I had issues with Insteon module only! I do not see changing mh for anything else, mh do all I need. >>>> Being actually too busy, when I reach my retirement time, I hope I will be able to help mh development/documentation... >>>> >>>> Big thanks to all of you, that have made mh great stuff. >>>> Best regards, >>>> >>>> Paul > >>>> De : Giles Godart-Brown <[email protected] <mailto:[email protected]>> >>>> EnvoyÃ?© : 29 octobre 2018 05:55:51 >>>> Ã?? : Lieven Hollevoet; [email protected] <mailto:[email protected]> >>>> >>>> Objet : Re: [mh] MH5.1 + The Future > >>>> I'm in a similar state. >>>> >>>> I've been running MH on raspberry pi for many years now, most of the code I've written has been specific to my installation, so not really a candidate to check in. >>>> >>>> MH does what it says on the tin so I don't need to tinker with it. I wouldn't even consider changing to anything else. >>>> >>>> Giles >>>> >>>> >>>> On 28/10/2018 21:07, Lieven Hollevoet wrote: > >>>>> Hello, >>>>> >>>>> Just a quick chime-in from my side. Family and work priorities over hobby-time prohibit me to do much coding on MisterHouse. On the other hand the various releases of the program are running for over 13 years in our home to automate all kinds of devices, from lights over blinds to monitoring of consumptions and detecting anomalies, and to glue various bits of electronics form different manufacturers together. Our home would be much less fun without MisterHouse! >>>>> >>>>> The next thing Iâ??d like to enable soon is the Google Home connection to be able to add another control surface to MisterHouse. If/when I find some time then this is the next thing Iâ??ll try to get working. >>>>> >>>>> I do have to say that all the work Howard has been doing on the web interface has brought MisterHouse to another level, making it much more useable/accessible for non-programmers ;-) So thanks for that! >>>>> >>>>> I donâ??t see any reason why I would move away from MisterHouse. It does all I want it to do. >>>>> >>>>> Best regards, >>>>> Lieven. >>>>> > >>>>>> Op 28 okt. 2018, om 14:18 heeft Serge Martel (smartel) <[email protected]> <mailto:[email protected]> het volgende geschreven: >>>>>> >>>>>> Same here! >>>>>> >>>>>> I am not a programmer, but I am a big fan of MH, I've been using it probably for the last 15 years ...X10, Zwave, weeder boards and now MySensors. >>>>>> >>>>>> I will sure update and keep you guys informed and that's how I can contribute, unfortunately my coding skills are very limited.... >>>>>> >>>>>> I don't know if my automated house would survive without MH! >>>>>> >>>>>> I would like to thank again everyone that contributes-have contributed to Misterhouse, and I certainly hope that lasts forever! >>>>>> >>>>>> Serge >>>>>> >>>>>> >>>>>> >>>>>> On 10/26/18 2:45 PM, H Plato wrote: >>>>>> > >>>>>>> Itâ??s almost been a year since MH5 was released. Master has 177 commits, which is probably overdue for a point release. Iâ??ve made a bunch of updates and bug fixes to IA7, the most notable probably being the faster load time. I put in a spinner, and using Tobiasâ??s idea, deferred loading some javascript modules until after the main collection is displayed. I get the collection in under 2 seconds, which is perceptually instant, as the spinner loads immediately. > >>>>>> It is good to hear about the work being done! >>>>>> > >>>>>>> Iâ??ve been running this code for a few months on my setup and I havenâ??t run into problems. It would be great if folks that use master could pull down the latest and report any problems or questions. > >>>>>> I will give it a try this weekend. >>>>>> > >>>>>>> On another note, Iâ??d be interested in the communityâ??s perspective on the future of MH. It seems like thereâ??s been a reduction in messages on the mailing lists, and not a big list of contributors submitting pull requests. I donâ??t know if this is due to the stability and maturity of MH, or if users are moving away to different directions. MH is definitely one of the oldest DIY HA products out there, but it seems like on-premise solutions are being more difficult to find. > >>>>>> For me MH is something that runs in the background and don't think much >>>>>> about it...until it stops working. It has the features I need and they >>>>>> work well. If I was updating my system with new devices for sure I >>>>>> would be more involved in the mailing list and getting into the code. >>>>>> > >>>>>>> I still donâ??t see anything in the market that has the local on-prem featureset of MH â?? Insteon, Zwave, speech, homekit, Google Home, Alexa, AD2USB, Nanoleaf, Yeelight, evapotranspiration, opensprinkler, venstar, MQTT â?? these are all technologies that I use and MH ties them all together. > >>>>>> I am not even sure what features I use at this point as it has been a >>>>>> while since I have made any changes! Probably the biggest one is >>>>>> Insteon but there are others as well. For sure it does a good job >>>>>> making everything work together. I am not sure what I would do if my >>>>>> IR remote control didn't turn on/off lighting scenes from my couch! >>>>>> >>>>>> I do find that I am hesitant to move to a new release due to my concern >>>>>> something might break. It is not so much MH but in my case the Insteon >>>>>> network. It seems things are always problems even if they don't have >>>>>> noticeable impact. I have learned to ignore phantom PLM entries I can't >>>>>> delete and links that don't sync anymore. I think this is in large part >>>>>> due to what I see is the overall low quality of Insteon and not MH >>>>>> itself. I say this because there are enough problems with the physical >>>>>> hardware that I would not be surprised if it would cause those sorts of >>>>>> things. >>>>>> >>>>>> I only mention that to show why I am hesitant to change things and that >>>>>> has limited my involvement. >>>>>> >>>>>> Thanks for your contribution. I and others have benefited from it >>>>>> greatly! >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> ________________________________________________________ >>>>>> To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users <https://lists.sourceforge.net/lists/listinfo/misterhouse-users> >>>>>> >>>>>> >>>>>> ________________________________________________________ >>>>>> To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users <https://lists.sourceforge.net/lists/listinfo/misterhouse-users> >>>>>> > >>>>> ________________________________________________________ >>>>> To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users <https://lists.sourceforge.net/lists/listinfo/misterhouse-users> >>>>> > >>> >>> >>> >>> Tony Yates [email protected] <mailto:[email protected]> >>> [email protected] <mailto:[email protected]> >>> ------------------------------------------------------------------------ >>> ________________________________________________________ >>> To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users <https://lists.sourceforge.net/lists/listinfo/misterhouse-users> > > > Tony Yates [email protected] <mailto:[email protected]> > [email protected] <mailto:[email protected]> > ------------------------------------------------------------------------ > ________________________________________________________ > To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users <https://lists.sourceforge.net/lists/listinfo/misterhouse-users> > ________________________________________________________ To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users