Re: [mh] Little problem with MQTT...

Hi Guys,

More on this...

This message mean that the connection has failed:

02/17/2019 13:22:22 *** mqtt mqtt_1 Received: ConnAck/at-most-once Connection Accepted

02/17/2019 13:22:22 *** mqtt mqtt_1: read_mqtt_msg Socket closed gracefully

02/17/2019 13:22:22 *** mqtt deleting mqtt_1

Now looking at the mosquitto broker, here what I am seeing...

1550536559: New connection from 127.0.0.1 on port 1883.
1550536559: New client connected from 127.0.0.1 as NetMQTTpm29198 (c1, k120).
1550536559: Socket error on client NetMQTTpm29198, disconnecting.

It is clear that my problem is the connection to the mosquitto broker...

This is broker: mosquitto version 1.4.10 (build date Wed, 06 Feb 2019 17:03:31 +0000)

Is there any special setting that need to be done on misterhouse or on the broker?

Thanks!
________________________________
De : Paul Voyer <[email protected]>
Envoyé : 17 février 2019 13:35
À : [email protected]
Objet : [mh] Little problem with MQTT...


Hello gurus!


I use to have Raspbian Wheezy running MisterHouse on RaspberryPi for quite a long time…

I use it to control Insteon appliances and light switches and since December some MQTT switches. This has been very stable!

MisterHouse Version: 5.0

Perl version: 5.014002

Mosquitto MQTT v3.1 broker


Recently I have moved all my stuff over a fresh Raspbian Stretch on same RaspberryPi installation:

What I did is:

- Installed Stretch on brand new SD card.

- Installed mosquitto (MQTT v3.1 broker)

- Installed all Perl (v5.24.1) modules required for my MisterHouse installation.

- I copied all my MisterHouse installation (/opt/misterhouse) to the new system.

- I putted my new SD card in my RaspberryPi.



- IP address has not changed.

- I have started MisterHouse without any new error message…


Here part of the log related to MQTT initialization:

#####

02/17/2019 13:22:22 *** mqtt mqtt_connect Socket (127.0.0.1:1883,121)

02/17/2019 13:22:22 *** mqtt Socket check (121) [ ]: Connected

02/17/2019 13:22:22 *** mqtt mqtt_1 Received: ConnAck/at-most-once Connection Accepted

02/17/2019 13:22:22 *** mqtt mqtt_1: read_mqtt_msg Socket closed gracefully

02/17/2019 13:22:22 *** mqtt deleting mqtt_1

$VAR1 = \bless( {

'keep_alive_timer' => 121,

'got_ping_response' => 1,

'host' => '127.0.0.1',

'next_ping' => '1550427868.90137',

'instance' => 'mqtt_1',

'state_now' => 'off',

'command_stack' => [],

'said' => '',

'user_name' => '',

'port' => 1883,

'topic' => '#/Sonoff#',

'password' => '',

'state' => 'off',

'socket' => bless( \*Symbol::GEN3, 'IO::Socket::INET' ),

'states' => [

'off',

'on'

]

}, 'mqtt' );


02/17/2019 13:22:22 *** mqtt mqtt_1 Received: No SubAck

02/17/2019 13:22:22 *** mqtt mqtt_1 Sub 1 Received: (--No $$msg{string}--)

02/17/2019 13:22:22 *** mqtt mqtt_1 Initializing MQTT connection ...


02/17/2019 13:22:22 Oops1: Use of uninitialized value in concatenation (.) or string at /opt/misterhouse/mh/bin/../lib/mqtt.pm line 778.


02/17/2019 13:22:22 *** mqtt mqtt set mqtt_1: [(on), (mqtt=HASH(0x3c8bf78)), ]

02/17/2019 13:22:22 *** mqtt mqtt set mqtt_1: isa mqtt

#####


Now, using MisterHouse, the Insteon appliances and switches are working fine but NOT the MQTT switches! I am still getting the following error:

#####

02/17/2019 13:24:46 *** mqtt mqtt_Item nom to MH to MQTT ($Sonoff_CEsmart_1) no p_setby ::set($msg, $p_setby)

02/17/2019 13:24:46 *** mqtt mqtt_1 failed (127.0.0.1/1883/#/Sonoff#)

#####

I am trying to understand the preceding error message…


If I am using mosquitto_pub, the following commands are working fine:

mosquitto_pub -h 127.0.0.1 -t "cmnd/Sonoff_CEsmart_1/POWER" -m ON

mosquitto_pub -h 127.0.0.1 -t "cmnd/Sonoff_CEsmart_1/POWER" -m OFF


And here my ~/mh/local/code/mqtt.mht:

#####

Format = A

# MQTT stuff

# noloop=start

CODE, require mqtt;

#

CODE, $mqtt1 = new mqtt('mqtt_1', '127.0.0.1', 1883, '#/Sonoff#', "", "", 121);

CODE, $Sonoff_HT16_1 = new mqtt_Item($mqtt1, 'cmnd/Sonoff_HT16_1/POWER');

CODE, $Sonoff_S31_1 = new mqtt_Item($mqtt1, 'cmnd/Sonoff_S31_1/POWER');

CODE, $Sonoff_Basic_1 = new mqtt_Item($mqtt1, 'cmnd/Sonoff_Basic_1/POWER');

CODE, $Sonoff_CEsmart_1 = new mqtt_Item($mqtt1, 'cmnd/Sonoff_CEsmart_1/POWER');

CODE, $Sonoff_CEsmart_2 = new mqtt_Item($mqtt1, 'cmnd/Sonoff_CEsmart_2/POWER');

# noloop=stop

#####


Do I missing a package somewhere?

This was working fine previously, I mean before new OS!


Thanks in advance!


Paul

________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users