Re: [mh] Dual band PLM death after 5 years

On Sat, Jun 08, 2019 at 08:10:07PM -0700, Marc MERLIN wrote:
> I also tried to find a DB I could just wipe with all mh insteon saved
> data, but I'm not sure if I found the right one.
> 
> Still going at it, a few hours in...

Specifically
08/06/2019 20:10:44  [Scan all link tables] Completed scanning of all regular items.
08/06/2019 20:10:44  [Scan all link tables] WARN, unable to  complete a scan of the following devices: $lvr_kpl, $kitchen_kpl, $garage2_neon_kpl, $corridor_mbr, $corridor_kpl,

and then I get errors on unrelated device even, telling me that my aldb
is not up to date, even tough I just did a scan all links :(

[Sync all links] Now syncing: $mbr_lamp3 (3 of 123)
[Insteon::BaseController]  Unable to add the following responder record to $corridor_kpl_lamp3 from $mbr_lamp3 because the aldb of $corridor_kpl_lamp3 is changed
 = 01; is_controller = 0; data3 = 06; cmd = add; ramp_rate = 1;
[Sync all links] WARN: failure occurred when syncing links for $mbr_lamp3. Resuming sync queue if it exists.
[Sync all links] Now syncing: $mbr_outside (4 of 123)
[Insteon::BaseController] Nothing to do when syncing links for $mbr_outside
[Sync all links] Now syncing: $br2_sw (5 of 123)
[Insteon::BaseController]  Unable to add the following responder record to $lvr_kpl_br2_sw from $br2_sw because the aldb of $lvr_kpl_br2_sw is changed
add; on_level = 100; data3 = 06; is_controller = 0; group = 01;
[Insteon::AllLinkDatabase] WARN The link table for $corridor_kpl has changed.
[Insteon::AllLinkDatabase] WARN: Link NOT added, please rescan this device and sync again.
[Sync all links] WARN: failure occurred when syncing links for $br2_sw. Resuming sync queue if it exists.
[Sync all links] Now syncing: $br2_lamp (6 of 123)
[Insteon::BaseController] Nothing to do when syncing links for $br2_lamp
[Sync all links] Now syncing: $fmr_kpl (7 of 123)
[Insteon::BaseController]  Unable to add the following responder record to $lvr_kpl_fmr_all from $fmr_kpl because the aldb of $lvr_kpl_fmr_all is changed
ntroller = 0; group = 01; data3 = 05; cmd = add; ramp_rate = 2;
[Insteon::BaseController]  Unable to add the following responder record to $kitchen_kpl_fmr_all from $fmr_kpl because the aldb of $kitchen_kpl_fmr_all is changed
add; on_level = 100; is_controller = 0; group = 01; data3 = 02;
[Insteon::AllLinkDatabase] WARN The link table for $kitchen_kpl has changed.
[Insteon::AllLinkDatabase] WARN: Link NOT added, please rescan this device and sync again.
[Sync all links] WARN: failure occurred when syncing links for $fmr_kpl. Resuming sync queue if it exists.
[Sync all links] Now syncing: $fmr_slav (8 of 123)
[Insteon::BaseController]  Unable to add the following responder record to $lvr_kpl_fmr_all from $fmr_slav because the aldb of $lvr_kpl_fmr_all is changed
 = 05; group = 01; is_controller = 0; cmd = add; ramp_rate = 2;
[Insteon::BaseController]  Unable to add the following responder record to $kitchen_kpl_fmr_all from $fmr_slav because the aldb of $kitchen_kpl_fmr_all is changed
add; is_controller = 0; group = 01; data3 = 02; on_level = 100;
[Insteon::AllLinkDatabase] WARN The link table for $kitchen_kpl has changed.
[Insteon::AllLinkDatabase] WARN: Link NOT added, please rescan this device and sync again.
[Sync all links] WARN: failure occurred when syncing links for $fmr_slav. Resuming sync queue if it exists.
[Sync all links] Now syncing: $fmr_lamp (9 of 123)
[Insteon::BaseController]  Unable to add the following responder record to $lvr_kpl_fmr_all from $fmr_lamp because the aldb of $lvr_kpl_fmr_all is changed
= 2; data3 = 05; group = 01; is_controller = 0; on_level = 100;
[Insteon::BaseController]  Unable to add the following responder record to $kitchen_kpl_fmr_all from $fmr_lamp because the aldb of $kitchen_kpl_fmr_all is changed
 = 02; is_controller = 0; group = 01; cmd = add; ramp_rate = 2;
[Insteon::AllLinkDatabase] WARN The link table for $kitchen_kpl has changed.
[Insteon::AllLinkDatabase] WARN: Link NOT added, please rescan this device and sync again.
[Sync all links] WARN: failure occurred when syncing links for $fmr_lamp. Resuming sync queue if it exists.
[Sync all links] Now syncing: $fmr_outside (10 of 123)
[Insteon::BaseController]  Unable to add the following responder record to $kitchen_kpl_fmr_outside from $fmr_outside because the aldb of $kitchen_kpl_fmr_outside is changed
= add; on_level = 100; is_controller = 0; group = 01; data3 = 07;
[Sync all links] WARN: failure occurred when syncing links for $fmr_outside. Resuming sync queue if it exists.
[Sync all links] Now syncing: $entryway (11 of 123)
[Insteon::BaseController]  Unable to add the following responder record to $lvr_kpl_entryway from $entryway because the aldb of $lvr_kpl_entryway is changed
data3 = 03; group = 01; is_controller = 0; on_level = 100; ramp_rate = 0.1; cmd = add;


-- 
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                       | PGP 7F55D5F27AAF9D08


________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users