Re: [mh] Impossible to sync all insteon links routines

I've got only I2CS devices but whenever I replace anything I update the
code and then do a "Force scan all device link tables" then "Delete orphan
links" and then "sync all links"

And have never had an issue.

On a PLM replacement this also works fine after linking all the devices
with the exception of KPLs, I've never been able to "fix" a KPL other than
factory reset it, then repair it and sync links.

I think I've got ~20 devices or so, but all wired (nothing battery).

On Sun, Apr 5, 2020 at 8:47 PM Marc MERLIN <[email protected]> wrote:

> On Sun, Apr 05, 2020 at 09:56:05AM -0700, Kevin Robert Keegan wrote:
> > Hi Marc,
> >
> > Sorry you are having so many problems, that is certainly very irritating.
> > I don't really know what is going on.  I haven't used misterhouse in a
> > while and haven't looked at the code in years.  My best suggestion is to
> > try and roll back to a prior version of misterhouse when everything was
> > working.  Otherwise, the only other suggestion is to move away from
> > misterhouse to a maintained insteon library.  Sadly, most of those don't
> > support i1 devices very well.
>
> Yeah, and I still have some amount of I1 devices I'm not super keen on
> ripping out, just because.
> Sure, they suck when you sync all links, but I do that less than once a
> year, so...
>
> Now, I didn't think anyone really touched the insteon syncing code since
> you last did, so I'm not sure rolling back a lot is likekly to fix
> things.
> H Plato/Lieven, do you remember? Is it worth me playing with git history
> and going way back to see if insteon sync/rescan was broken?
>
> Anyone else: anyone still using decent insteon installs (dozens or
> hundred+ nodes if you count KPL buttons)?
> Is scan all/sync all working for you?
>
> Thanks,
> Marc
>
> > Sorry I wasn't more help
> >
> > Kevin
> >
> > On Sat, Apr 4, 2020 at 12:11 PM Marc MERLIN <[email protected]> wrote:
> >
> > > Howdy,
> > >
> > > This is with misterhouse git master, but been true for several years,
> now.
> > >
> > > I know insteon isn't really mainteained, but I need help, my house has
> > > been getting more and more out of sync as devices die and mh has been
> > > unable to reconcile things.
> > >
> > > Scan all links works.
> > > 04/04/2020 12:02:08  [Scan all link tables] Completed scanning of all
> > > regular items.
> > >
> > > Audit sync all links immediately fails, though. Why are my ALDBs
> considered
> > > changed even though nothing changed?
> > > [Insteon::BaseController] (AUDIT) Unable to add the following responder
> > > record to $lvr_kpl_mbr_kpl from $mbr_kpl because the aldb of
> > > $lvr_kpl_mbr_kpl is changed
> > >  add; data3 = 07; group = 01; is_controller = 0; ramp_rate = 2;
> > > [Sync all links] WARN: failure occurred when syncing links for
> $mbr_kpl.
> > > Resuming sync queue if it exists.
> > >
> > > I've tried a force scan of all link tables, but it doesn't really help,
> > > outside
> > > of taking maybe 1h to scan everything (lots of devices, many I1).
> > > I thought maybe MH had some broken cached dbs, so I deleted the entire
> data
> > > directory and let it be re-created, but it didn't help.
> > >
> > > I also need to delete orphan links, which would run, but that's totally
> > > unsafe
> > > to run, because it would delete a fair amount of half established links
> > > (the
> > > other half is missing because sync all links is broken).
> > >
> > > So, I'm stuck, and that's been true for years now. I have to link
> devices
> > > manually using the buttons, it's a real pain.
> > >
> > > Am I the only one in this situation? Any suggestions?
> > >
> > > Thanks,
> > > Marc
> > >
> > > More logs:
> > > [Insteon::BaseController] (AUDIT) Unable to add the following responder
> > > record to $lvr_kpl_mbr_kpl from $mbr_kpl because the aldb of
> > > $lvr_kpl_mbr_kpl is changed
> > >  add; data3 = 07; group = 01; is_controller = 0; ramp_rate = 2;
> > > [Sync all links] WARN: failure occurred when syncing links for
> $mbr_kpl.
> > > Resuming sync queue if it exists.
> > > [Sync all links] Now syncing: $mbr_lamp2 (2 of 125)
> > > [Insteon::BaseController] (AUDIT) Unable to add the following responder
> > > record to $lvr_kpl_mbr_lamp2 from $mbr_lamp2 because the aldb of
> > > $lvr_kpl_mbr_lamp2 is changed
> > >  add; data3 = 08; group = 01; is_controller = 0; ramp_rate = 1;
> > > [Sync all links] WARN: failure occurred when syncing links for
> $mbr_lamp2.
> > > Resuming sync queue if it exists.
> > > [Sync all links] Now syncing: $mbr_lamp3 (3 of 125)
> > > [Insteon::BaseController] Nothing to do when syncing links for
> $mbr_lamp3
> > > [Sync all links] Now syncing: $mbr_outside (4 of 125)
> > > [Insteon::BaseController] Nothing to do when syncing links for
> $mbr_outside
> > > [Sync all links] Now syncing: $br2_sw (5 of 125)
> > > [Insteon::BaseController] (AUDIT) Unable to add the following responder
> > > record to $lvr_kpl_br2_sw from $br2_sw because the aldb of
> $lvr_kpl_br2_sw
> > > is changed
> > > oup = 01; ramp_rate = 2; data3 = 06; cmd = add; on_level = 100;
> > > [Sync all links] WARN: failure occurred when syncing links for $br2_sw.
> > > Resuming sync queue if it exists.
> > > [Sync all links] Now syncing: $br2_lamp (6 of 125)
> > > [Insteon::BaseController] Nothing to do when syncing links for
> $br2_lamp
> > > [Sync all links] Now syncing: $fmr_kpl (7 of 125)
> > > [Insteon::BaseController] (AUDIT) Unable to add the following responder
> > > record to $lvr_kpl_fmr_all from $fmr_kpl because the aldb of
> > > $lvr_kpl_fmr_all is changed
> > >
> > > (many lines not pasted)
> > >
> > > [Sync all links] All links have completed syncing
> > > [Sync all links] WARN! Failures occured, some links involving the
> > > following objects remain out-of-sync: $mbr_kpl, $mbr_lamp2, $br2_sw,
> > > $fmr_kpl, $fmr_slav, $fmr_lamp, $entryway, $lvr_kpl, $lvr_lamp,
> > > $yard_lights, $kitchen_kpl, $dining_kpl, $garage_desk,
> $garage1_neon_kpl,
> > > $garage2_neon_kpl, $gar_outlights_kpl, $corridor_fmr, $corridor_mbr,
> > > $corridor_kpl, $fmr_kpl_kitchen_kpl, $fmr_kpl_dining_kpl,
> > > $fmr_kpl_entryway, $fmr_kpl_lvr_kpl, $fmr_kpl_gar_outlights,
> > > $fmr_kpl_yard_lights, $fmr_slav_kitchen_kpl, $fmr_slav_dining_kpl,
> > > $fmr_slav_entryway, $fmr_slav_lvr_kpl, $kitchen_kpl_fmr_all,
> > > $kitchen_kpl_dining_kpl, $kitchen_kpl_entryway, $kitchen_kpl_lvr_kpl,
> > > $kitchen_kpl_corridor_kpl, $kitchen_kpl_gar_outlights,
> > > $dining_kpl_kitchen_kpl, $dining_kpl_fmr_all, $dining_kpl_entryway,
> > > $dining_kpl_lvr_kpl, $dining_kpl_corridor_kpl, $dining_kpl_kplG,
> > > $dining_kpl_crows, $lvr_kpl_lvr_lamp, $lvr_kpl_entryway,
> > > $lvr_kpl_kitchen_kpl, $lvr_kpl_fmr_all, $lvr_kpl_br2_sw,
> $lvr_kpl_mbr_kpl,
> > > $lvr_kpl_mbr_lamp2, $corridor_kpl_br2_sw, $corridor_kpl_mbr_kpl,
> > > $corridor_kpl_lamp2, $corridor_kpl_kitchen_kpl, $mbr_kpl_corridor_kpl,
> > > $mbr_kpl_br2_sw, $garage1_neon_kpl_garage2_neon,
> > > $garage1_neon_kpl_gar_outlights, $garage1_neon_kpl_yard_lights,
> > > $garage2_neon_kpl_garage1_neon, $garage2_neon_kpl_kplB,
> > > $garage2_neon_kpl_gar_outlights, $garage2_neon_kpl_yard_lights,
> > > $gar_outlights_kpl_garage1_neon, $gar_outlights_kpl_garage2_neon,
> > > $gar_outlights_kpl_yard_lights, $all_unused_scene, $fmr_all_scene,
> > > $all_out_scene, $mbr_all_scene, $fmr_lvr_scene, $fmr_lvr_scene_slow,
> > > $crows_scene, $gar_outlights_kpls, $garage1_neon_kpls,
> $garage2_neon_kpls,
> > > $fmr_kpls, $kitchen_kpls, $dining_kpls, $entryway_kpls, $lvr_kpls,
> > > $lvr_lamp_kpls, $yard_lights_kpls, $mbr_kpls, $mbr_lamp2_kpls,
> > > $corridor_kpls, $br2_sw_kpls,
> > >
> > >
> > > --
> > > "A mouse is a device used to point at the xterm you want to type in" -
> > > A.S.R.
> > >
> > > Home page: http://marc.merlins.org/                       | PGP
> > > 7F55D5F27AAF9D08
> > >
>
> --
> "A mouse is a device used to point at the xterm you want to type in" -
> A.S.R.
>
> Home page: http://marc.merlins.org/
>
>
> ________________________________________________________
> To unsubscribe from this list, go to:
> https://lists.sourceforge.net/lists/listinfo/misterhouse-users
>
>

________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users