Re: [mh] Multiple Insteon PLMs

Spencer Ryan <[email protected]>
Newsgroups gmane.comp.misc.misterhouse.user
Message-ID <CALWY-Yq0OTLH7KAZopFy_ezYuopD4xOsis1CSJBbhL=d_-pwNQ@mail.gmail.com>
Pretty sure you can only have one PLM defined.

The USB versions just contain a FTDI USB to serial converter. The COM/TTY
device that shows up in your OS works identical to the serial version. Plus
the newer PLMs last a lot longer, the capacitor issues are mostly resolved.

On Thu, Dec 24, 2020, 10:30 PM Bruce Schaeffer <[email protected]>
wrote:

> I recently lost my next-to-last PowerLinc 2413S.  Its backup is now
> running in its place.
>
> While I've thought about replacing the capacitors in my old ones, I
> haven't done so yet.
>
> Once I put the backup into place, I set out to purchase its backup.  I
> always try to keep one on the side.
>
> My problem: I can't find any new serial PLMs.  USB is slowly (some say
> quickly) replacing serial.  While the PC I'm running on has a serial port,
> its replacement may not.
>
> I'm thinking that it may be time to switch to USB, so I bought my first
> 2413U.
>
> I want to experiment with the USB PowerLinc at the same time as the serial
> one.  Maybe have some devices turned on/off via one PowerLinc and others
> with the other one.
>
> My question: How do I code for a second PLM in "items.mht"?  All my
> current file has for the PLM is "INSTEON_PLM, PLM,".  How do I specify a
> second PLM?  How do I direct MH to send commands to one PLM or the other?
>
> Thanks,
> Bruce Schaeffer
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> <#m_-7337573299542177252_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> ________________________________________________________
> To unsubscribe from this list, go to:
> https://lists.sourceforge.net/lists/listinfo/misterhouse-users
>
>

________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.