Re: [mh] New toys?

Jeff Siddall via misterhouse-users <[email protected]>
Newsgroups gmane.comp.misc.misterhouse.user
Message-ID <[email protected]>
The pins for the ESP are on the TYWE3S board. Have a look here:

https://tasmota.github.io/docs/devices/TYWE3S/

Looks like it should be pretty easy to flash. Now, figuring out
how to control the dimmer after that might be... non-trivial.
Unless there are pins connected to the TYWE3S that aren't visible
from your photos, it appears the communication may be with some
serial protocol, which would need to be figured out, as the only
pads visibly connected are Vcc, GND, EN, TX and RX. Maybe some
more searches will reveal a template that will work with these

Jeff

On 2021-01-25 11:20 a.m., Tom MacLean
wrote:

I opened the Globe Dimmer all the way up. I don’t see any obvious
Tx and Rx lines, just 4 test points. Even if the test points are
the signals I want, I don’t like the switch enough from a cosmetic
standpoint to bother.

I found a new (very expensive) smart switch on the market
with a pretty display: Orro. They claim the are weeks away from
having a local API. Though they have a number of integrations,
it seems each has its on “face” on the screen, and I want a
multiswitch face like an Insteon keypad.

Sent from my iPhone

On Dec 26, 2020, at 11:08 AM, Jeff
Siddall via misterhouse-users
<[email protected]> wrote:



Thanks for the update Tom. Please send more info if
you do ever get the Globe dimmer (or any other globe
things for that matter) working. I had been tempted
to buy one of those but wasn't confident I could get
it reflashed.

I don't know why so many companies are reluctant to
make their stuff easy to modify. I guess it is
support requests (ex: warranty returns after people
bust things) or maybe it's something their lawyers
said. Unfortunate either way.

On 2020-12-25 4:13 p.m.,
Tom MacLean wrote:

I got one of the wifi dimmers from Globe Electric.
Tuya-Convert doesn’t work, as I expected but had
hoped for the best. I haven’t cracked it open all the
way to see about reprogramming over FTDI.

I can’t quite understand what motivates these
companies to prevent tou using the hardware the way
you want. It’s not like their software is
subscription-based, is it?

Sent from my iPhone

On Dec 25, 2020, at 3:30
PM, Stephen Switzer <[email protected]>
wrote:



My family doesn't celebrate a
holiday today, but I know most families do.
With this in mind, how many new toys will be
experimented with over the next few days? :-D

--

Best regards,
Steve Switzer

---
Get world-class business I.T. services and a phone system with awesome features that won't challenge your budget!
http://www.sbsROC.com

________________________________________________________

To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users

________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users

________________________________________________________

To unsubscribe from this list, go to:
https://lists.sourceforge.net/lists/listinfo/misterhouse-users

________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users
image0.jpeg (image/jpeg, 129.4 KB) - not displayed
image1.jpeg (image/jpeg, 101.9 KB) - not displayed
image4.jpeg (image/jpeg, 90.7 KB) - not displayed
image5.jpeg (image/jpeg, 115.8 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.