Re: [mh] Misterhouse and CADDX alarm integration troubles-Help needed

 Hi again. Looks that CADDX code is not used broadly in the group...
After hours trying to identify the trouble cause I just had an idea!!!And digging the closed i found an old USB2SERIAL cable Prolific-basedI connected it to MH and CADDX and..................it worked!
Does this mean that FTDI driver or my VSCom adapter is the culprint ? And not not sure if this is intermittent or stable so I keep on testing,,,Of course any hint for this case is very welcome.More updates to come soon
btw my RPI 3B+ is running Linux misterhouse 5.10.11-v7+ #1399 SMP Thu Jan 28 12:06:05 GMT 2021 armv7l GNU/Linux
GV--------------------------------------------------
    On Sunday, January 31, 2021, 10:43:08 AM GMT+2, Gianni Veloce via misterhouse-users <[email protected]> wrote:  
 
 Hello MH freeksRecently my old UBUNTU laptop running MH crashed due to (urecoverable) HD failure.Luckily I had a recent backup of the MH tree and proced to migrating to a Raspberry Pi 3B+Using the MH Guides i managed quite easily this task.But something is wrong with the CADDX alarm integration and my knowledge does not help me to troubleshoot and solve it :(To give you some more detail on thisMH looks not receiving the messages from caddx.pl (via UDP) to process them accordinglyCaddx.pl looks working but there are some repeating errors in /tmp/caddx.log.xxxx with this pattern 10:30:50 [Calculated Sum:] dump:        [2f][30]10:30:50 [Csum Failed accum:] dump:     [7e][01][2e][36][03]10:30:50 [Csum Failed Raw msg:] dump:   [2e]10:30:50 [Csum Failed line_sum:] dump:  [36][03]10:30:50 [Csum Failed Force Ack:] dump: [7e][01][1d][1e][1f]......while  caddx.out.xxxx shows some goodlooking messages like01/31 10:03:18 cache_info adding [8],[faulted] as:[1]cache modified: 8 faulted01/31 10:03:18 cache_info adding [8],[trouble] as:[0]cache modified: 8 trouble01/31 10:03:18 cache_info adding [8],[bypassed] as:[0]cache modified: 8 bypassed01/31 10:03:18 cache_info adding [8],[alarm_memory] as:[1]cache modified: 8 alarm_memory[7e][31]01/31 10:03:18 cache_info adding [9],[faulted] as:[1]cache modified: 9 faulted01/31 10:03:18 cache_info adding [9],[trouble] as:[0]cache modified: 9 trouble01/31 10:03:18 cache_info adding [9],[bypassed] as:[0]cache modified: 9 bypassed01/31 10:03:18 cache_info adding [9],[alarm_memory] as:[0]cache modified: 9 alarm_memoryB = 38400, D = 8, S = 1, P = none, H = none........I use the same hardware as in my previous MH setup that is an FTDI based USB-SERIAL interface from VSCom.
If there are any experts willing to help me i can provide for sure more details,I am thinking to run WIRESHARK to monitor the UDP communication between CADDX.pl and MH but maybe you have better and easier proposals to start with for troubleshooting?
TIAGV
________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users

________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users