Re: [mh] Schulter Ditra thermostats

I had figured out the main Ditra object and that the others were 
dependent objects, but I had assumed "serial" was a string... perhaps it 
will work better as an integer.

Can you give an example of reading the temp value?  I assumed it would 
be stored in ->state but I got back nothing.  (OTOH, if my Serial was 
wrong, maybe that would be expected).

Is the set point set something like this? $room1_sp->set(12.5)

Thanks

On 2021-11-04 23:53, H Plato wrote:
> Not only a spelling mistake, but no instructions either! :)
> 
> Two things,
> 
>  Set the username (email) and password in the mh.config like this:
> 
> ditra_username = [email protected]
> ditra_password = password
> 
> Then define the master object. I have two thermostats, but they use
> the master object like this:
> 
> use Schulter_Ditra;
> $ditra = new Schulter_Ditra;
> 
> $room1_sp = new Ditra_thermostat_sp($ditra,123456);
> $room1_mode = new Ditra_thermostat_mode($ditra,123456);
> $room1_temp = new Ditra_thermostat_temp($ditra,123456);
> 
> $room2_sp = new Ditra_thermostat_sp($ditra,234567);
> $room2_mode = new Ditra_thermostat_mode($ditra,234567);
> $room2_temp = new Ditra_thermostat_temp($ditra,234567);
> 
> Then in the web interface you can see the mode and change the
> setpoint. By default I set the poll to every 10 seconds, so it’s not
> realtime to reflect local changes.
> 
> I’ll add these instructions and correct the spelling mistake for the 
> next update
> 
>> On Nov 4, 2021, at 9:14 PM, Tom MacLean <[email protected]> wrote:
>> 
>> 
>> I have the Schluter code running, but frankly I don't know how to use 
>> it.  I set the required params, and I can see it authenticating and 
>> fetching my group.  I tried creating a temp object, but I don't know 
>> how to read it.
>> 
>> $Basement_Bathroom_Thermostat = new Schulter_Ditra();
>> $Basement_Bathroom_temp = new 
>> Ditra_thermostat_temp($Basement_Bathroom_Thermostat,"SERIAL NUMBER");
>> 
>> Can you provide any guidance?
>> 
>> Thanks,
>> Tom
>> 
>> On 2021-11-04 17:20, Tom MacLean wrote:
>>> Is it all contained in lib/Schulter_Ditra.pm  ?   (BTW, it's 
>>> Schluter.)
>>> Will this lib run on the current release or are there unmet
>>> dependencies?  In any case, i will try.
>>> Cheers
>>> On 2021-11-03 22:49, H Plato wrote:
>>>> That’s good. I uploaded my latest module to github. It tracks 
>>>> mode,
>>>> and you can change the setpoint and pull the temperature. Be good to
>>>> know if you have any feedback.
>>>>> On Nov 3, 2021, at 8:35 PM, Tom MacLean <[email protected]> 
>>>>> wrote:
>>>>> It took me a little fighting to get Crypt::SSLeay installed, but I 
>>>>> got there. (cpan wouldn't do it, I had to apt-get the relevant 
>>>>> libraries.)
>>>>> I am able to authenticate at the schluter URL as well as the 
>>>>> generic one.  I checked and both domains map to the same IP 
>>>>> address.
>>>>> On 2021-11-02 10:52, H Plato wrote:
>>>>>> Interesting. I can authenticate against that URL as well, so I bet
>>>>>> you’re correct that the reseller is branding that URL.
>>>>>> To create an account, I had to have power to my wifi device, and 
>>>>>> then
>>>>>> associated that device with an email account.
>>>>>> I don’t have any documentation — I pulled 
>>>>>> the endpoints from other
>>>>>> integrations that are out there on github.
>>>>>>> On Nov 1, 2021, at 9:17 PM, Tom MacLean <[email protected]> 
>>>>>>> wrote:
>>>>>>> In truth, I haven't hooked up my unit to wifi yet -- the relevant 
>>>>>>> bathroom is still under construction (by me), but I'm almost 
>>>>>>> done.  The heated floor and thermostat are in, all I need is the 
>>>>>>> "round tuit" to connect it to wifi.
>>>>>>> The URL I have is diferrent, but the Schluter Thermostat is 
>>>>>>> definitely an OJ Microline ... so I think they have branded URLs 
>>>>>>> or perhaps a different application number.  The code I expect to 
>>>>>>> use uses:
>>>>>>> https://mythermostat.info/api/authenticate/user
>>>>>>> {"Email":"LOGIN EMAIL","Password":"LOGIN 
>>>>>>> PASSWORD","Application":0}
>>>>>>> Looks familiar, no?
>>>>>>> Do you have documentation? The only two actions I know about are 
>>>>>>> setting an override "away" temperature, and resuming the normal 
>>>>>>> schedule.
>>>>>>> Cheers
>>>>>>> Tom
>>>>>>> On 2021-10-31 18:25, H Plato wrote:
>>>>>>>> OK, if you have an account with one of those stats, try running 
>>>>>>>> this
>>>>>>>> command to see if you get a sessionID:
>>>>>>>> ./get_url -response_code -json -post
>>>>>>>> '{"Email”:”[email protected]","Password”:"password","Application":"7"}'
>>>>>>>> https://ditra-heat-e-wifi.schluter.com/api/authenticate/user
>>>>>>>> If you get back something like this:
>>>>>>>> RESPONSECODE:200
>>>>>>>> {"SessionId”:”sdfhsdihflasdfhalsdiufha","NewAccount":false,"ErrorCode":0,"RoleType":3000,"Email":"[email protected]","Language":”EN"}
>>>>>>>> Then it will work.
>>>>>>>>> On Oct 31, 2021, at 4:12 PM, Tom MacLean <[email protected]> 
>>>>>>>>> wrote:
>>>>>>>>> Hi
>>>>>>>>> Is the Schluter thermostat one of the models made by OJ 
>>>>>>>>> Electronics?  They make thermostats for a bunch of floor 
>>>>>>>>> heating companies, including also WarmlyYours. In short, I 
>>>>>>>>> could test it if is.   I didn’t think 
>>>>>>>>> they had a public API. All I found was a rather limited NodeRED 
>>>>>>>>> script.
>>>>>>>>> Cheers,
>>>>>>>>> Tom
>>>>>>>>> Sent from my iPhone
>>>>>>>>>> On Oct 30, 2021, at 2:34 PM, H Plato <[email protected]> wrote:
>>>>>>>>>> I don’t know if 
>>>>>>>>>> anyone else has any of these, but I’m 
>>>>>>>>>> just putting the finishing touches on a MH module to poll and 
>>>>>>>>>> control the wifi in-floor heat thermostats.
>>>>>>>>>> It feels like there are a bunch of changes out there (like the 
>>>>>>>>>> tasmota stuff), I’m wondering if it 
>>>>>>>>>> makes sense to combine them all into master and look to 
>>>>>>>>>> package it for a release. MH is pretty mature and stable, so 
>>>>>>>>>> there hasn’t been updates in a while, 
>>>>>>>>>> but would be good to have a current download.
>>>>>>>>>> ________________________________________________________
>>>>>>>>>> To unsubscribe from this list, go to: 
>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/misterhouse-users
>>>>>>>>> ________________________________________________________
>>>>>>>>> To unsubscribe from this list, go to: 
>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/misterhouse-users
>>>>> ________________________________________________________
>>>>> To unsubscribe from this list, go to: 
>>>>> https://lists.sourceforge.net/lists/listinfo/misterhouse-users
>>> ________________________________________________________
>>> To unsubscribe from this list, go to:
>>> https://lists.sourceforge.net/lists/listinfo/misterhouse-users


________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users