Re: [mh] Questions for X10/Voice control

 Dear Wayne
thanks again for your support efforts
In my case with the Dot3 it worked with the new AlexaBridge and port 80.Instead of setting up a reverse proxy i just used a iptables redirect command.
So far so, good.:)
TIA
GV
    On Wednesday, March 16, 2022, 04:13:46 AM GMT+2, Wayne Gatlin <[email protected]> wrote:  
 
 I have a 2242 hub that I have been using for many years. It will control X10 and Insteon so you don't need another PLM but you can use both if you want. 
For the Alexa Bridge module, I run mine on the MH native web port 8080 but some people have reported that their Echo would not discover on any port other than 80. You should be able to get apache to reverse proxy the virtual directory that the Alexa module uses if you have to use port 80.
On Fri, Feb 25, 2022, 1:13 AM Gianni Veloce via misterhouse-users <[email protected]> wrote:

 Hello MH CommunityI have a couple of questions to help me decide my way forward with MH and you may have the experience to answer1.I am using my old X10 serial PLM and have in my closer an Insteon PLM (2242) bought some years ago as a backup. Is it possible to have them work together for  managing lights/appliances (x10 and Insteon)? Or only only one PLM can be supported by MH?2. Is perhaps also INSTEON already an old (dead?) technology and should go to newer alternatives? In there case my X10 devices will go to trash?Proposals?3.I see there are newer MH modules for Alexa /Google Home integration. Do they work well with MH? Do they require MH webserver port change from 8080 to 80 as in this case they will conflict with my Asterisk and Zoneminder running on the same box (Rpi 4). Any other tips/hints on this?
TIA 
GV
________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users


________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users

________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users