Re: [mh] My old reliable W800

I've replaced all of my current hardware/switches with z-wave, wi-fi, 
and yolink. I have a W800-32 that I'm not using any more. I also have a 
bunch of X10/Insteon hardware that I'm willing to sell. Some of it new 
in the box (along with working PLM). Contact me off line if you're 
willing to buy.

Thanks!
[email protected]

On 8/6/22 12:32 PM, Rick Steeves wrote:
>
> OK, I'm continuing to look into this, with no hope of replacing the 
> W800-32. I've come up with several options.
>
> a) simply replace it with a MR26a. My understanding is the range on 
> the MR26a is terrible, so I'd likely also need a SR751 Smart RF Repeater
>
> b) use a custom solution created by someone on the internet that uses 
> a Arduino nano, custom code, and a RF device at 315 Mhz that I can 
> tune to 310Mhz. https://www.saidsimple.com/daniel/blog/117970/
>
> Still looking for other options, but thought I'd pass along what I've 
> got. What I really need to be able to do is read my motion sensors. 
> Currently I don't have my MH server connected to a power line reading 
> device (because my power is unreliable).
>
> Thanks!
>
> rick
>
>
>
> On 8/2/2022 5:41 PM, Rick Steeves wrote:
>> So my longstanding MH hasn't been working right for a while.
>>
>> Looks like my W800 is dead. At least, the power to it seems OK, and 
>> everything else hasn't changed in probably a decade.
>>
>> I tested the power in. I tested sending/receiving signal from a 
>> Palmpad remote control. Not getting anything in MH.
>>
>> wgldesigns.com is down.
>>
>> So two questions:
>> a) is there anything else I can do to test it?
>> b) What's the best replacement alternative? Mostly my implementation 
>> uses a firecracker to transmit, and the W800 to receive, so my MH 
>> implementation is mostly deaf now.
>>
>> Thx!
> -- 
> Rick Steeves
> https://www.irelandbybicycle.com
>
> It's all fun and games until someone ends up wearing a cone.
>
>
> ________________________________________________________
> To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users
>



________________________________________________________
To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users