Re: error switching modes

18:35:35.515 SCH-N392: trying to switch from BREW mode
18:35:35.516 SCH-N392: _setmodebrewtomodem
18:35:35.516 SCH-N392: Switching from BREW to modem
18:35:35.516 /dev/ttyUSB2: Writing Data - 8 bytes
00000000 41 54 45 30 56 31 0d 0a                             ATE0V1..

so it does send an AT command while trying to switch from brew mode to
modem mode?
commenting the line make it work a bit longer till the next mode change
could it be something changed in the mode change protocol?
anyway I can check that?
do you guys care enough to guide a new person trying to contribute or
am I tags as an annoying newbie and should stop maling to the list?


On Thu, 10 Feb 2005 14:24:44 +0200, E L <[email protected]> wrote:
> It didn't work,
> I also noticed I get the same error when switching from none to brew.
> any ideas on how I can find out what's wrong?
> 
> 
> On Wed, 9 Feb 2005 20:16:05 -0500, Stephen Wood <[email protected]> wrote:
> > You might try replacing "_setmodebrewtomodem" in com_samsung.py with
> > the routine of the same name in com_samsung_packet.py.  In principle
> > it does the same thing, but does it a little differently.
> >
> > AT#PMODE=0 is not what your code is trying to send to the phone when
> > you get the error.  It is trying to send the packet
> > "setmodemmoderequest" (in p_brew.p) which is something are not likely
> > to be able to send with cu.
> >
> > Stephen
> >
> >
> > On Thu, 10 Feb 2005 02:32:40 +0200, E L <[email protected]> wrote:
> > > Hey,
> > > when trying to get phone numbers I keep getting:
> > >
> > > 2:25:06.892 SCH-N392: trying to switch from BREW mode
> > > 2:25:06.919 SCH-N392: Switching from BREW to modem
> > > 2:25:12.962 Error: Device needs attention - SCH-N392 on /dev/ttyUSB2
> > > SCH-N392 on /dev/ttyUSB2: The phone is not responding while
> > > transitioning mode from none to phonebook.
> > >
> > > See the help for troubleshooting tips
> > >
> > > when I do maunally at#PMODE=0 it works fine
> > > (manually means using cu -l/dev/ttyUSB2)
> > > it seems to happen from  self.setmode(self.MODEPHONEBOOK) in getfundamentals
> > >
> > > right now com_samsungschn392.py is preety much a copy of com_samsungscha670.py
> > >
> > > Ely
> > >
> > > -------------------------------------------------------
> > > SF email is sponsored by - The IT Product Guide
> > > Read honest & candid reviews on hundreds of IT Products from real users.
> > > Discover which products truly live up to the hype. Start reading now.
> > > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > > _______________________________________________
> > > BitPim-devel mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/bitpim-devel
> > >
> >
> > -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT Products from real users.
> > Discover which products truly live up to the hype. Start reading now.
> > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> > _______________________________________________
> > BitPim-devel mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/bitpim-devel
> >
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click