Re: LG-VX4650 Update

Joe,

I just added my original VX4400 cable from Susteen to the 
"com_lgvx4400.py" file; I added the following lines:
    usbids_usbtoserial=(
        ( 0x067b, 0x2303, None), # VID=Prolific, PID=USB to serial
        ( 0x0403, 0x6001, None), # VID=FTDI, PID=USB to serial
        ( 0x0731, 0x2003, None), # VID=Susteen, PID=Universal USB to serial
        ( 0x067b, 0x2303, None), # VID=Susteen, PID=USB to serial
        )

The last two lines are the two Susteen cables I have.  The first one is 
the universal cable, which should be the same for all phones which 
attach to it (not just the VX4400 and VX4650, which have been tested).  
The second, is the original Susteen cable I bought a couple of years 
ago, which is for the VX4400.

Mike

Michael C. wrote:

> Worked like a champ!  Autodetect now works with my VX4650.  Let me 
> know when the VX4400 code is ready, and I'll try it too.
>
> Joe Pham wrote:
>
>>> It is the Susteen universal cable
>>>   
>>
>>
>> Can you insert this line into com_lgvx4400.py at about line 768 and 
>> retest AutoPort & DetectPhone?  It's the signature for your cable.
>>
>> ( 0x0731, 0x2003, None),
>>
>>
>> -Joe Pham
>>
>>   
>



-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf