Re: Fwd: How to figure out how to add support for another phone

Woohoo!
Figured out the problem. Bitpim detect was finding the phone's modem port,
not the serial port. When I manually changed it to the serial port,
uploading the phonebook worked!

Viewing the filesystem still doesn't work. The following shows up in the
protocol log
22:15:00.309 SCP7500: Listing files in dir: ''
22:15:00.309 SCP7500: sendbrewcommand Data - 8 bytes
<#! phones.p_brew.listfilerequest !#>
00000000 59 0b 00 00 00 00 01 00                             Y.......

22:15:00.309 SCP7500: brew response Data - 9 bytes
<#! phones.p_brew.listfileresponse !#>
00000000 13 59 0b 00 00 00 00 01 00                          .Y.......

22:15:00.309 SCP7500: Failed to list files in dir
22:15:00.319 SCP7500: Listing subdirs in dir: ''
22:15:00.319 SCP7500: sendbrewcommand Data - 8 bytes
<#! phones.p_brew.listdirectoryrequest !#>
00000000 59 0a 00 00 00 00 01 00                             Y.......

22:15:00.319 SCP7500: brew response Data - 9 bytes
<#! phones.p_brew.listdirectoryresponse !#>
00000000 13 59 0a 00 00 00 00 01 00                          .Y.......

22:15:00.319 SCP7500: Failed to list dir

The following shows up in the "Log"
22:15:00.309 SCP7500: Listing files in dir: ''
22:15:00.309 SCP7500: Failed to list files in dir
22:15:00.319 SCP7500: Listing subdirs in dir: ''
22:15:00.319 SCP7500: Failed to list dir

Yet I see when its trying to upload the phonebook that it goes through a
mess of commands looking at the file system which seem to work, such as
22:16:05.673 SCP7500: Directory 1, File Count=0
22:16:05.673 SCP7500: Indexing directory 2
22:16:05.673 SCP7500: Sanyo phonebook request Data - 179 bytes
<#! phones.p_sanyomedia.sanyochangedir !#>
Eventually listing filenames in the blocks that are returned.


On 6/2/06, David Melgar <[email protected]> wrote:
>
> Running the updated code,
>
> Detect works.
> Viewing filesystem: I see msgs in the console determining the baud rate..
> takes it a while. But nothing shows up in the view. It thought it used to
> fail almost instantly.
>
> Uploading phonebook: Goes through the same determination of baud rate. But
> nothing appears to have uploaded to the phone and it didn't reboot. A popup
> showed up. Title, "Device needs attention - SCP7500 on COM5". Text is
> "SCP7500 on COM5: The phone is not responding while transitioning mode from
> none to phonebook. See the help for troubleshooting tips".
>
> Should it say MM7500 instead of SCP7500?
>
> Download phonebook: same.
>
> I had said in an earlier note that viewing the filesystem through BitPim
> didn't work and that I'd like it to work, so I assumed you were asking
> something else, such as if there was a way to view the filesystem on the
> phone, which there isn't.
>
> On 6/2/06, Stephen Wood <[email protected]> wrote:
>
> > Update your subversion archive, and then run BitPim from the source.
> Select the MM-7500 and give it a try.
>
> On 6/2/06, David Melgar < [email protected]> wrote:
> >
> > Ok, I have BitPim running from source. What should I try?
> >
>
>
>
> >
> > > There isn't a user accessible way to browse the filesystem on the
> > > phone.
> > >
> >
> Do you mean by this, that when you try to use BitPim to read the
> filesystem, you don't see the filesystem?
>
> Stephen
>
>
>
>
> _______________________________________________
> BitPim-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bitpim-devel
>
>
>
>

_______________________________________________
BitPim-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bitpim-devel