Re: Wap Push problems

I am asking myself if 8 bits messages are not the problem... When I try 
to execute the AT command for Wap push, it even blocks the mobile for a 
few time !

Is it possible to have a 7 bits version of the AT command ?

PS: for alcatel mobiles, two AT commands are wrong
- AT+CNMI=1,3,0,0 (1,2,0,0 does not work)
- for AT+CMGS, the PDU must begin with extra 00

Aarno Syvänen wrote:

>Hi Olivier,
>
>Olivier Durécu wrote:
>
>>I am testing Kannel wap push capabilities with Alcatel mobile phones but
>>not successfully. I use AT2 as SMSC. The execution of the AT command
>>seems OK...
>>But no push comes on the target phone... Could someone give me a
>>complete AT+CMGS command, that has already worked on another phone (to
>>realize a push) so that I check what is the wrong (the AT command,
>>Alcatel Mobile, ...).
>>
>
>Does the phone understand a 8-bit SMS message containing a tokenised
>(say) 
>SI document (cvs userguide contains a working example)? 
>
>Aarno
>

-- 
##############################
Olivier Durecu
Alcatel Research & Innovation
Project "Next Generation Radio Solution"

Office B1-132 / Phone +33 (0)1 69 63 16 61

Route de Nozay
F-91460 Marcoussis