RE: [RFI+Patch] AT2 Modems.conf

"Oded Arbel" <[email protected]>
Newsgroups gmane.comp.mobile.kannel.devel
Message-ID <[email protected]> 
the AT+CPIN= -> OK problem was before Bruno's patch - I see it in my
setup all the time, but have been way too busy ito fix it, mainly as
restarting kannel again solves the problem (the PIN number is already
entered so the modem does not ask for it again). I now see that this is
not the case in you setup - I will update from CVS and check it out
later.

--
Oded Arbel
m-Wise Inc.
[email protected]

If you lie to the compiler, it will get its revenge. 
	-- Henry Spencer 


> -----Original Message-----
> From: Abd Rahman Johari [mailto:[email protected]]
> Sent: Wednesday, March 13, 2002 7:30 AM
> To: Bruno David Rodrigues
> Cc: [email protected]
> Subject: Re: [RFI+Patch] AT2 Modems.conf
> 
> 
> Hi,
> 
> i think something is broken again for wavecom modem,
> 
> i just installed latest cvs, 1/2 hour ago, and i can't run 
> kannel on my wavecom modem :(
> 
> 
> 
> probably the log below can help u out :)
> 
> 
> 
> cheers,
> 
> -man-
> 
> 
> 
> [ajohari@manxs gateway]$ ./bearerbox wavecom.conf &
> 
> [1] 12421
> 
> 2002-03-13 12:59:50 [0] INFO: Debug_lvl = -1, log_file = 
> <none>, log_lvl = 0
> 
> [ajohari@manxs gateway]$ 2002-03-13 12:59:50 [0] DEBUG: 
> Kannel bearerbox version `cvs'.
> 
> System Linux, release 2.4.9-13, version #1 Tue Oct 30 
> 20:11:04 EST 2001, machine i686.
> 
> Hostname manxs.lan, IP 192.168.10.18.
> 
> Libxml version 20412.
> 
> Using OpenSSL 0.9.6b [engine] 9 Jul 2001.
> 
> Using checking malloc.
> 
> 
> 
> 2002-03-13 12:59:50 [0] INFO: Added logfile `core-log-in.log' 
> with level `0'.
> 
> 2002-03-13 12:59:50 [0] INFO: ----------------------------------------
> 
> 2002-03-13 12:59:50 [0] INFO: Kannel bearerbox II version cvs starting
> 
> 2002-03-13 12:59:50 [0] INFO: Started access logfile 
> `core-access-in.log'.
> 
> 2002-03-13 12:59:50 [0] DEBUG: HTTP: Opening server at port 13000.
> 
> 2002-03-13 12:59:50 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
> 
> 2002-03-13 12:59:50 [0] DEBUG: Started thread 2 
> (gwlib/http.c:server_thread)
> 
> 2002-03-13 12:59:50 [0] DEBUG: Started thread 3 
> (gw/bb_http.c:httpadmin_run)
> 
> 2002-03-13 12:59:50 [0] DEBUG: starting smsbox connection module
> 
> 2002-03-13 12:59:50 [0] DEBUG: Started thread 4 
> (gw/bb_boxc.c:smsboxc_run)
> 
> 2002-03-13 12:59:50 [0] INFO: AT2[W]: configuration shows 
> modemtype=wavecom
> 
> 2002-03-13 12:59:50 [0] INFO: AT2[W]: configured for modem-id 1
> 
> 2002-03-13 12:59:50 [0] INFO: AT2[W]: configured for speed 9600
> 
> 2002-03-13 12:59:50 [0] DEBUG: Started thread 5 
> (gw/smsc_at2.c:at2_device_thread)
> 
> 2002-03-13 12:59:50 [0] DEBUG: Started thread 6 
> (gw/bb_smscconn.c:sms_router)
> 
> 2002-03-13 12:59:50 [0] INFO: MAIN: Start-up done, entering mainloop
> 
> 2002-03-13 12:59:50 [5] INFO: AT2[W]: opening device
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: device opened
> 
> 2002-03-13 12:59:50 [5] INFO: AT2[W]: speed set to 9600
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: device opened
> 
> 2002-03-13 12:59:50 [5] INFO: AT2[W]: init device
> 
> 2002-03-13 12:59:50 [5] INFO: AT2[W]: speed set to 9600
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: --> AT^M
> 
> 2002-03-13 12:59:50 [0] DEBUG: AT2[W]: start called
> 
> 2002-03-13 12:59:50 [6] DEBUG: sms_router: time to sleep
> 
> 2002-03-13 12:59:50 [6] DEBUG: sms_router: list_len = 0
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: <-- AT
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: --> AT&F^M
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: <-- AT&F
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: --> ATE0^M
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: <-- ATE0
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: --> AT+IFC=2,2^M
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 12:59:50 [5] DEBUG: AT2[W]: --> AT+CPIN?^M
> 
> 2002-03-13 12:59:51 [5] DEBUG: AT2[W]: <-- +CPIN: SIM PIN
> 
> 2002-03-13 12:59:51 [5] DEBUG: AT2[W]: --> AT+CPIN=1234^M
> 
> 2002-03-13 12:59:52 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 13:00:03 [5] ERROR: AT2[W]: Opening failed. Terminating
> 
> 2002-03-13 13:00:03 [5] INFO: AT2[W]: waiting for 15 seconds 
> before trying to connect again
> 
> 
> 
> [ajohari@manxs gateway]$ killall -9 bearerbox 
> 
> [1]+  Killed                  ./bearerbox wavecom.conf
> 
> [ajohari@manxs gateway]$ ./bearerbox wavecom.conf &
> 
> [1] 12439
> 
> [ajohari@manxs gateway]$ 2002-03-13 13:00:11 [0] INFO: 
> Debug_lvl = -1, log_file = <none>, log_lvl = 0
> 
> 2002-03-13 13:00:11 [0] DEBUG: Kannel bearerbox version `cvs'.
> 
> System Linux, release 2.4.9-13, version #1 Tue Oct 30 
> 20:11:04 EST 2001, machine i686.
> 
> Hostname manxs.lan, IP 192.168.10.18.
> 
> Libxml version 20412.
> 
> Using OpenSSL 0.9.6b [engine] 9 Jul 2001.
> 
> Using checking malloc.
> 
> 
> 
> 2002-03-13 13:00:11 [0] INFO: Added logfile `core-log-in.log' 
> with level `0'.
> 
> 2002-03-13 13:00:11 [0] INFO: ----------------------------------------
> 
> 2002-03-13 13:00:11 [0] INFO: Kannel bearerbox II version cvs starting
> 
> 2002-03-13 13:00:11 [0] INFO: Started access logfile 
> `core-access-in.log'.
> 
> 2002-03-13 13:00:11 [0] DEBUG: HTTP: Opening server at port 13000.
> 
> 2002-03-13 13:00:11 [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
> 
> 2002-03-13 13:00:11 [0] DEBUG: Started thread 2 
> (gwlib/http.c:server_thread)2002-03-13 13:00:11 [0] DEBUG: 
> Started thread 3 (gw/bb_http.c:httpadmin_run)
> 
> 2002-03-13 13:00:11 [0] DEBUG: starting smsbox connection module
> 
> 2002-03-13 13:00:11 [0] DEBUG: Started thread 4 
> (gw/bb_boxc.c:smsboxc_run)
> 
> 2002-03-13 13:00:11 [0] INFO: AT2[W]: configuration shows 
> modemtype=wavecom
> 
> 2002-03-13 13:00:11 [0] INFO: AT2[W]: configured for modem-id 1
> 
> 2002-03-13 13:00:11 [0] INFO: AT2[W]: configured for speed 9600
> 
> 2002-03-13 13:00:11 [0] DEBUG: Started thread 5 
> (gw/smsc_at2.c:at2_device_thread)
> 
> 2002-03-13 13:00:11 [5] INFO: AT2[W]: opening device
> 
> 2002-03-13 13:00:11 [5] DEBUG: AT2[W]: device opened
> 
> 2002-03-13 13:00:11 [5] INFO: AT2[W]: speed set to 9600
> 
> 2002-03-13 13:00:11 [5] DEBUG: AT2[W]: device opened
> 
> 2002-03-13 13:00:11 [5] INFO: AT2[W]: init device
> 
> 2002-03-13 13:00:11 [5] INFO: AT2[W]: speed set to 9600
> 
> 2002-03-13 13:00:11 [5] DEBUG: AT2[W]: --> AT^M
> 
> 2002-03-13 13:00:11 [0] DEBUG: Started thread 6 
> (gw/bb_smscconn.c:sms_router)
> 
> 2002-03-13 13:00:11 [0] INFO: MAIN: Start-up done, entering mainloop
> 
> 2002-03-13 13:00:11 [0] DEBUG: AT2[W]: start called
> 
> 2002-03-13 13:00:11 [6] DEBUG: sms_router: time to sleep
> 
> 2002-03-13 13:00:11 [6] DEBUG: sms_router: list_len = 0
> 
> 2002-03-13 13:00:11 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 13:00:11 [5] DEBUG: AT2[W]: --> AT&F^M
> 
> 2002-03-13 13:00:11 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 13:00:11 [5] DEBUG: AT2[W]: --> ATE0^M
> 
> 2002-03-13 13:00:12 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 13:00:12 [5] DEBUG: AT2[W]: --> AT+IFC=2,2^M
> 
> 2002-03-13 13:00:12 [5] DEBUG: AT2[W]: <-- OK
> 
> 2002-03-13 13:00:12 [5] DEBUG: AT2[W]: --> AT+CPIN?^M
> 
> 2002-03-13 13:00:12 [5] DEBUG: AT2[W]: <-- +CPIN: READY
> 
> 2002-03-13 13:00:23 [5] ERROR: AT2[W]: Opening failed. Terminating
> 
> 2002-03-13 13:00:23 [5] INFO: AT2[W]: waiting for 15 seconds 
> before trying to connect again
> 
> 
> 
> 
> 
> 
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.